Manual Antec 500

34 pages 0.61 mb
Download

Go to site of 34

Summary
  • Antec 500 - page 1

    PHANTOM 500 User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario ...

  • Antec 500 - page 2

    Table of Contents Table des matières / Inhaltsverzeichnis Índice / Indice English Français Deutsch Italiano Español Tables 1 5 8 11 14 17 1 ...

  • Antec 500 - page 3

    2 The high quality of our products is assured by a continuous process of refinement of their technical features. Therefore, it is possible that your product may differ in some respect from the descriptions contained in this manual. This is not a problem – it is an improvement. All features, descriptions, and illustrations contained herein are val ...

  • Antec 500 - page 4

    Power Switch: This power supply includes a main power switch. Make sure you turn the switch to the ON ( I ) position before you boot up your computer for the first time. In normal operation there is no need to turn the switch to the OFF ( O ) position since the power supply is equipped with a soft on/off feature which turns your computer on and off ...

  • Antec 500 - page 5

    4 Position 3: "Virtually Silent" mode. The fan will activate if the temperature reaches 55°C inside the power supply. The fan will automatically vary its speed in response to changing temperatures. Once the temperature decreases below 55°C, the fan will turn off. We recommend this mode if you're determined to have the quietest powe ...

  • Antec 500 - page 6

    Chez Antec, nous affinons et améliorons continuellement nos produits pour garantir une qualité supérieure. Il est donc possible que le nouveau Phantom 500 diffère sensiblement des descriptions contenues dans ce manuel. Il ne s'agit pas là d'un problème, juste d'une amélioration. A compter de la date de publication, toutes les ...

  • Antec 500 - page 7

    Interrupteur d'alimentation: Le Phantom 500 inclut un interrupteur d'alimentation secteur. Assurez-vous de mettre l'interrupteur sur position Marche ( I ) avant d'initialiser l'ordinateur pour la première fois. En cours de fonctionnement normal, inutile de mettre l'interrupteur sur position Arrêt ( O ) dans la mesure ...

  • Antec 500 - page 8

    automatiquement sa vitesse aux changements de température. Une fois la température en dessous de 47.5°C, le ventilateur s'arrêtera. Nous recommandons ce mode si vous préférez bénéficier d'un équilibre entre une haute performance et un fonctionnement silencieux. Position 3: mode "ultra-silencieux". Le ventilateur s' ...

  • Antec 500 - page 9

    Die hohe Qualität unserer Produkte wird durch eine ständige Optimierung ihrer technischen Leistungsmerkmale gewährleistet. Deshalb ist es möglich, dass Ihr Produkt nicht genau mit einigen Beschreibungen in dieser Betriebsanleitung übereinstimmt. Dies ist aber kein Problem, sondern eine Verbesserung. Alle hier enthaltenen technischen Leistungsm ...

  • Antec 500 - page 10

    Netzschalter: Dieses Netzteil verfügt über einen Hauptnetzschalter. Stellen Sie diesen Schalter unbedingt auf ON ( I ), bevor Sie den Computer zum ersten Mal booten. In der Regel brauchen Sie diesen Schalter nie auf OFF (O) zu stellen, da das Netzteil mit einer softwarebasierten Ein-/Ausschaltfunktion ausgestattet ist. Falls der Computer abstürz ...

  • Antec 500 - page 11

    Position 3: "Geräuschloser Modus". Der Lüfter wird aktiviert, wenn die Temperatur innerhalb des Netzteils 60°C erreicht und passt seine Geschwindigkeit automatisch an die jeweilige Temperatur an. Sobald die Temperatur unter 60°C fällt, schaltet er sich ab. Wir empfehlen diesen Modus, wenn das Netzteil absolut geräuschlos arbeiten so ...

  • Antec 500 - page 12

    La Antec è costantemente impegnata nel perfezionamento e nel miglioramento dei propri prodotti al fine di garantire la massima qualità. Per questo motivo, è possibile che il nuovo Phantom 500 risulti leggermente diverso da quello descritto nel presente manuale. Non è un problema, è solo un miglioramento. Tutte le caratteristiche, descrizioni e ...

  • Antec 500 - page 13

    Interruttore di alimentazione: il presente alimentatore comprende un interruttore di alimentazione principale. Accertarsi di impostare l'interruttore sulla posizione ON ( I ) prima di inizializzare il computer per la prima volta. Normalmente non occorre commutarlo sulla posizione OFF (O), in quanto l'alimentatore comprende una funzione so ...

  • Antec 500 - page 14

    Posizione 2: Modo "Silenzioso". La ventola s'attiva se la temperatura raggiunge 47.5°C all'interno dell'alimentatore. La ventola varia automatica mente la propria velocità in risposta alla variazione della temperatura. Una volta che la temperatura scende al di sotto di 47.5°C, la ventola si spegne. Raccomandiamo questo m ...

  • Antec 500 - page 15

    En Antec ajustamos y perfeccionamos nuestros productos para asegurar la máxima calidad. Por lo tanto, es posible que su nueva fuente Phantom 500 muestre ligeras diferencias con la descripción que aparece en este manual. No se trata de un problema, sino de una mejora. En la fecha de su publicación, todas las características, descripciones e ilus ...

  • Antec 500 - page 16

    Interruptor de alimentación: Esta fuente de alimentación incluye un interruptor de alimentación principal. Asegúrese de ponerlo en la posición de encendido ( I ) antes de arrancar el ordenador por primera vez. Para funcionamiento normal no es necesario situar el interruptor en posición de apagado ( O ), ya que la fuente de alimentación está ...

  • Antec 500 - page 17

    temperatura desciende por debajo de 47.5°C, el ventilador se apaga. Se recomienda este modo si prefiere un equilibrio entre alto rendimiento y funcionamiento en silencio. Posición 3: Modo "Virtually Silent" (prácticamente en silencio). El ventilador se activa si la temperatura alcanza 55°C dentro de la fuente de ali mentación. El ven ...

  • Antec 500 - page 18

    1.0 INPUT / ENTRÉE / EINGANG / ALIMENTAZIONE IN INGRESSO / ENTRADA 1.1 VOLTAGE (AC Input) / TENSION (c.a.) / SPANNUNG (Wechselspannung) / TENSIONE (CA in ingresso) / TENSIÓN (entrada CA) 1.2 FREQUENCY / FRÉQUENCE / FREQUENZ / FREQUENZA / FRECUENCIA 47Hz ~ 63Hz 1.3 CURRENT / INTENSITÉ / STROMSTÄRKE / CORRENTE / CORRIENTE 1.4 INRUSH CURRENT / CO ...

  • Antec 500 - page 19

    2.0 OUTPUT / SORTIE / AUSGANG / USCITA / SALIDA NOTE / REMARQUE / HINWEIS / NOTA 2.1 HOLD-UP TIME: 20ms (minimum) / TEMPS DE MAINTIEN : 20ms (minimum) / VERWEILZEIT: 20ms (Minimum) / TEMPO DI INTERRUZIONE: 20ms (minimo) / TIEMPO DE DEMORA: 20ms (mínimo) 18 VOLTAGE / TENSION / SPANNUNG TENSIONE / TENSIÓN MAX. LOAD / CHARGE MAX. / MAXIMALLAST / CAR ...

  • Antec 500 - page 20

    2.2 LOAD TRANSIENT RESPONSE (STEP LOAD) / RÉGIME TRANSITOIRE DE CHARGE / LASTÜBERGANGSVERHALTEN (SCHRITTLAST) / RISPOSTA ALLE VARIAZIONI DI CARICO (CARICO A GRADINO) / RESPUESTA A TRANSITORIOS DE CARGA (CARGA REPENTINA) 2.3 OVERSHOOT / DÉPASSEMENT / ÜBERSCHWINGEN / SUPERAMENTO / SOBREIMPULSO 19 Step load changes of up to 20% of full load, while ...

  • Antec 500 - page 21

    3.0 PROTECTION / PROTECTION / SCHUTZSCHALTUNG / PROTEZIONE / PROTECCIÓN 3.1 INPUT UNDER VOLTAGE / SOUS-TENSIONS D'ENTRÉE / EINGANG UNTER SPANNUNG / SOTTENSIONE IN INGRESSO / TENSIÓN INSUFICIENTE DE ENTRADA 20 If the power supply is latched into shutdown stage (when OCP, OVP, OPP or short protection is working), the power supply shall return ...

  • Antec 500 - page 22

    3 . 2 OVER CURRENT PROTECTION / PROTECTION CONTRE LES SURINTENSITÉS / SCHUTZ VOR STROMSPITZEN / PROTEZIONE DA SOVRACORRENTI / PROTECCIÓN CONTRA SOBRECORRIENTE 3.3 OVER VOLTAGE PROTECTION / PROTECTION CONTRE LES SURINTENSITÉS / SCHUTZ VOR STROMSPITZEN / PROTEZIONE CONTRO LE / SOTTOTENSIONIPROTECCIÓN CONTRA SOBRECORRIENTE 3. 4 SHORT CIRCUIT PROTE ...

  • Antec 500 - page 23

    22 3 .6 OVER TEMPERATURE / SURCHAUFFE / ÜBERHITZUNGSSCHUTZ / SOVRATEMPERATURA / PROTECCIÓN CONTRA LA TEMPERATURA EXCESVA 3 .7 OVER LOAD PROTECTION / SOUS-TENSIONS D'ENTRÉE / ÜBERLASTUNGSSCHUTZ / PROTEZIONE DA SOVRACCARICO / PROTECCIÓN CONTRA SOBRECARGA The power supply includes an over-temperature protection sensor, which can trip and shu ...

  • Antec 500 - page 24

    4.0 TIME SEQUENCE / SÉQUENCE CHRONOLOGIQUE / ZEITLICHE ABFOLGE / SEQUENZA DI TEMPO / SECUENCIA DE TIEMPO 115V/230V(FULL LOAD): 1ms minimum FIGURE 1 23 T1 Power-On Time / Temps de mise sous tension / Einschaltdauer / Tempo di accensione / Tiempo de encendido (500ms.max.) T2 Rise-time / Temps de montée / Anlaufzeit / Tempo di salita / Tiempo de ele ...

  • Antec 500 - page 25

    115V/230V (PLEINE CHARGE) : 1ms minimum FIGURE 1 115V/230V (MAXIMALLAST): 1ms mind ABBILDUNG 1 24 ...

  • Antec 500 - page 26

    25 115V/230V (PIENO CARICO): 1ms minimo FIGURA 1 115 V/230V (PLENA CARGA): 1ms mínimo FIGURA 1 ...

  • Antec 500 - page 27

    4.1 REMOTE ON/OFF CONTROL / TÉLÉCOMMANDE / FERNSTEUERUNG DER EIN-/AUSSCHALTUNG / TELECOMANDO DI ACCENSIONE / SPEGNIMENTO (ON/OFF) / CONTROL DE ENCENDIDO/APAGADO A DISTANCIA The power supply is turn on / off by TTL signal / Le bloc d'alimentation est mis sous / hors tension par un signal TTL / Das Netzteil wird per TTL-Signal ein-und ausgesch ...

  • Antec 500 - page 28

    4.2 AUXILIARY +5Vsb / AUX (+5 Vsb) / AUXILIAIRE +5Vsb / AUSILIARIO +5Vsb / AUXILIAR +5Vsb 4.3 AUTO RESTART / REDÉMARRAGE AUTOMATIQUE / AUTOMATISCHER NEUSTART / RIAVVIO AUTOMATICO / REINICIO AUTOMÁTICO 27 This power supply is specifically equipped with an independent stand-by +5V output current, 2.0A max. This output will always provide +5V except ...

  • Antec 500 - page 29

    28 5.0 ENVIRONMENT / ENVIRONNEMENT / UMGEBUNGSBEDINGUNGEN / AMBIENTE / CONDICIONES AMBIENTALES 6.0 CE REQUIREMENTS / INTERFÉRENCES ÉLECTROMAGNÉTIQUES / CE ANFORDERUNGEN / REQUISITI CE / REQUISITOS DE LA CE 7. 0 MTBF at 25°C=80,000 hours / Moyenne des temps de bon fonctionnement à 25° C =80 000 heures / MTBF bei 25°C =80.000 Stunden / Tempo m ...

  • Antec 500 - page 30

    29 8.0 DC CONNECTOR AND CASE REQUIREMENTS / CONNECTEURS C.C. ET BOÎTIER EXIGÉ / ANFORDERUNGEN FÜR GLEICHSTROMANSCHLUSS UND GEHÄUSE / REQUISITI DEL CONNETTORE CC E DEL TELAIO / REQUISITOS DEL CONECTOR CC Y DE LA CAJA 16AWG (Wire / Conducteur / Leitung / cavo / hilo) Orange / Arancione / Naranja Blue / Bleu / Blau / Blu / Azul Black / Noir / Schw ...

  • Antec 500 - page 31

    30 FLOPPY DRIVE CONNECTOR / CONNECTEUR DE LECTEUR DE DISQUETTE / ANSCHLUSS FÜR / CONNETTORE PER UNITÀ FLOPPY / CONECTOR PARA UNIDAD DE HOUSING: JMT JP11635-4 / BOÎTIER: JMT JP11635-4 / GEHÄUSE: JMT JP11635-4 / ALLOGGIAMENTO: JMT JP11635-4 / CARCASA: JMT JP11635-4 HOUSING: WST P4-I25001 OR EQU / BOÎTIER: WST P4-I25001 OU ÉQUIVALENT / GEHÄUSE: ...

  • Antec 500 - page 32

    4pin +12V POWER CONNECTOR / CONNECTEUR D’ALIMENTATION +12 V / +12-V-NETZANSCHLUSS / CONNETTORE DI ALIMENTAZIONE +12V / CONECTOR DE CORRIENTE +12 V 8pin +12V POWER CONNECTOR / CONNECTEUR D’ALIMENTATION +12 V / +12-V-NETZANSCHLUSS / CONNETTORE DI ALIMENTAZIONE +12V / CONECTOR DE CORRIENTE +12 V 31 Pin / Broche / Stift / Clv 1 2 3 4 5 6 7 8 Signal ...

  • Antec 500 - page 33

    SERIAL ATA POWER CONNECTOR / CONNECTEUR D’ALIMENTATION ATA SÉRIE / SATA-NETZANSCHLUSS / CONNETTORE DI ALIMENTAZIONE SERIAL ATA / CONECTOR DE CORRIENTE SERIAL ATA PCI EXPRESS CONNECTOR / CONNECTEUR PCI EXPRESS / PCI EXPRESS-ANSCHLUSS / CONNETTORE PCI EXPRESS / CONECTOR DE PCI EXPRESS HOUSING: MOLEX 455590002 OR EQU / BOÎTIER: MOLEX 455590002 OU ...

  • Antec 500 - page 34

    Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 Tel: 1-510-770-1200 Fax: 1-510-770-1288 Antec Europe B.V. Sydneystraat 33 3047 BP Rotterdam The Netherlands Tel: +31 (0) 10 462-2060 Fax: +31 (0) 10 437-1752 Technical Support US & Canada 1-800-22ANTEC CustomerSupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.co ...

Manufacturer Antec Category Power Supply

Documents that we receive from a manufacturer of a Antec 500 can be divided into several groups. They are, among others:
- Antec technical drawings
- 500 manuals
- Antec product data sheets
- information booklets
- or energy labels Antec 500
All of them are important, but the most important information from the point of view of use of the device are in the user manual Antec 500.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Antec 500, service manual, brief instructions and user manuals Antec 500. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Antec 500.

Similar manuals

A complete manual for the device Antec 500, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Antec 500 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Antec 500.

A complete Antec manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Antec 500 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Antec 500, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Antec 500, that we can find in the current document
3. Tips how to use the basic functions of the device Antec 500 - which should help us in our first steps of using Antec 500
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Antec 500
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Antec 500 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Antec 500?

Use the form below

If you did not solve your problem by using a manual Antec 500, ask a question using the form below. If a user had a similar problem with Antec 500 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)