English dropdown-ico

Manual POSIFLEX Business Machines MP-300

10 pages 3.89 mb
Download

Go to site of 10

Summary
  • POSIFLEX Business Machines MP-300 - page 1

    Part 1 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are d ...

  • POSIFLEX Business Machines MP-300 - page 2

    Part 2 GE TTING STARTED PRODUCT BRIEFING The MP - 300 series printer is a mobile thermal printer particularly designed to cope with the operation of a Posiflex mobile terminal MT - 2000 series. It uses thermal sensitive paper in form of a roll at a width of 58 mm. It communicates with the host MT - 2000 system through BlueTooth technology. An optio ...

  • POSIFLEX Business Machines MP-300 - page 3

    Part 3 UNPACKING Followings are items you may find when you carefully unpack the carton that delivers the mobile printer. If there is any discrepancy or problem, contact your dealer immediately. Be sure to save the packing materials in case the printer needs to be shipped at some point in the future . 1). The printer itself 2). Thermal paper test r ...

  • POSIFLEX Business Machines MP-300 - page 4

    Part 4 QUICK START - UP THE PAPER Load Paper Roll 1. Open the dark transparent cover of the printer at the lift recesses on both sides and pull the cover up to open. 2. Drop the thermal paper roll into its compartment in the orien tation as shown in Pix. 1 . 3. Pull the leading end of paper roll to come out from the exit when closing the cover back ...

  • POSIFLEX Business Machines MP-300 - page 5

    Part 5 THE BATTERY Remove / Install Battery Please power off the printer before removing the battery. Please refer to the bottom picture of the printer in the previous pages. Pull down the battery lock t o remove the battery. The screw on battery has nothing to do with this operation. The battery used to power the mobile printer is identical to the ...

  • POSIFLEX Business Machines MP-300 - page 6

    Part 6 THE CARRY BAG Please refer to these pictu res for lettered items noted by parentheses in descriptions below. Insert the mobile printer into the leather carry bag so that the buttons & indicators of the printer appear in the transparent window of the bag ( g ). When the printer goes fully in, press t he printer against the bag so that the ...

  • POSIFLEX Business Machines MP-300 - page 7

    Part 7 APPLIC ATION GUIDE SELF TEST Press both the power and the feed button together to turn on the printer, the printer will perform a self test and pr int out test result as in the example at right. There are several important information contained in the printout, what noted here are only examples. Actual result will show different data from th ...

  • POSIFLEX Business Machines MP-300 - page 8

    Part 8 POWER SAVING CONCERNS The mobile printer is built - in with power saving features to provide the user the longest possible service session for each battery change. Therefore, the printer will automatically turn itself out when it has been idle for quite a while (say, about half an hour) to preserve battery power. To put the printer back to o ...

  • POSIFLEX Business Machines MP-300 - page 9

    Part 9 TECHNICAL ISSUES SERVICE PORT Please note that this service port is d esigned for service operation only and is not for end users . A conversion cable (P/N: 21863157600) is required to connect this port to a RS - 232 port to communicate with the host under protocol 9600 bps, none parity check, 8 data bits, 1 stop bit for that p urpose. Impro ...

  • POSIFLEX Business Machines MP-300 - page 10

    Part 10 SPECIFIC ATIONS Control button switch es : Power, Feed LED indicators : Power, Error, Charge Paper width : 58 mm Print width : 48 mm Dot per line : 384 dots Print r esolution : 8 dots/mm Printing speed : 70 mm/s Paper roll max. diameter: 56 m m Command support : ESC/POS ( EPSON command ) Data buffer size : 30 KB N.V. bit image data size : 1 ...

Manufacturer POSIFLEX Business Machines Category Printer

Documents that we receive from a manufacturer of a POSIFLEX Business Machines MP-300 can be divided into several groups. They are, among others:
- POSIFLEX Business Machines technical drawings
- MP-300 manuals
- POSIFLEX Business Machines product data sheets
- information booklets
- or energy labels POSIFLEX Business Machines MP-300
All of them are important, but the most important information from the point of view of use of the device are in the user manual POSIFLEX Business Machines MP-300.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals POSIFLEX Business Machines MP-300, service manual, brief instructions and user manuals POSIFLEX Business Machines MP-300. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product POSIFLEX Business Machines MP-300.

Similar manuals

A complete manual for the device POSIFLEX Business Machines MP-300, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use POSIFLEX Business Machines MP-300 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of POSIFLEX Business Machines MP-300.

A complete POSIFLEX Business Machines manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual POSIFLEX Business Machines MP-300 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the POSIFLEX Business Machines MP-300, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the POSIFLEX Business Machines MP-300, that we can find in the current document
3. Tips how to use the basic functions of the device POSIFLEX Business Machines MP-300 - which should help us in our first steps of using POSIFLEX Business Machines MP-300
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with POSIFLEX Business Machines MP-300
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of POSIFLEX Business Machines MP-300 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning POSIFLEX Business Machines MP-300?

Use the form below

If you did not solve your problem by using a manual POSIFLEX Business Machines MP-300, ask a question using the form below. If a user had a similar problem with POSIFLEX Business Machines MP-300 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)