-
JVC DLA-RS1X - page 1
Getting Started Preparation Basic Oper ation Settings Troubleshooting Others LCT2398-001A D-ILA PR OJECT OR PR OJECTEUR D-ILA PR O YECT OR D-ILA INSTR UCTIONS MANUEL D’INSTR UCTIONS MANU AL DE INSTR UCCIONES For Customer use : Enter below the serial No . which is located on the bottom side of the cabinet. Retain this in formation for future refe ...
-
JVC DLA-RS1X - page 2
1 2 Getting Star ted Safety Precautions IMPOR T ANT INFORMA TION About the installation place Do not install the projector in a place that cannot suppor t its weight securely . If the installation place is not sturdy enough, the projector could f all or ov er tur n, possibly causing personal injury . IMPOR T ANT SAFEGU ARDS Electrical energy can pe ...
-
JVC DLA-RS1X - page 3
3 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others - T o allow better heat dissipation, keep a clearance between this unit and its su rrounding as shown below . When this unit is enclosed i n a space of dimensi ons as shown below , use an air-conditioner so that the inter nal and external temper atures are the sa ...
-
JVC DLA-RS1X - page 4
4 Safety Precautions (Continued) 1 Getting Star ted PO WER CONNECTION For USA and Canada onl y Use only the fo llowing pow er cord. Pow e r c o r d W ARN ING: Do not cut off the main p lug from this equi pment. If the plug fitted is not suitable f or the po wer points in your home or the cab le is too shor t to reach a power point, then obtain an a ...
-
JVC DLA-RS1X - page 5
5 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others DLA-RS1X_EN.book Page 5 Wedn esday, December 19, 2007 1:0 9 PM ...
-
JVC DLA-RS1X - page 6
6 Main Features Supports Multiple Digital ............................................... . Devices z Comes with a dual HD MI terminal that allows digital tran smission of high definition signals. ( p P14 ) DLA-RS1X_EN.book Page 6 Wedn esday, December 19, 2007 1:0 9 PM ...
-
JVC DLA-RS1X - page 7
7 Getting Started Preparation Basic Operation Settings Troubleshooting Others ................................................................. . Beautiful Images on Big Screen z Enjoy smooth and high resoluti on video images with no visible grid, brought about by full high definit ion resolution of 1920 c 1080 pixels. ( p P20 ) ................... ...
-
JVC DLA-RS1X - page 8
8 1 Getting Star ted .................................................. . Getting Started Safety Precautions ................................................ 2 Main Features .................. ................................... 6 Contents .............................................................. 8 How to Read this Manual/ Accessories/Optional ...
-
JVC DLA-RS1X - page 9
9 Getting Started Preparation Basic Operation Settings Troubleshooting Others ENGLISH How to Read this Manual/ Accessories/Optional Accessories z Instruction manual, warranty card and other printed material are also included. Please check with your authorized dealer for details. z Replacement Lamp: BHL5009 -S (Lamp Unit) z Replacement Filte r: LC32 ...
-
JVC DLA-RS1X - page 10
1 10 Getting Star ted Controls and Features Rear Side/Top Surface Exhaust Vent Lamp Cover ( p P38 ) To connect the pow er cord ( p P20 ) Remote Sensor ( p P13 ) Front Side/Left Side Remote Sen sor ( p P13 ) Air Inlets Lens Cap z This unit comes with buffer material that c ushions the lens. Remove the buffer material before use. z Do not thr ...
-
JVC DLA-RS1X - page 11
11 Getting Started Preparation Basic Operation Settings Troubleshooting Others ENGLISH WARNING LAMP ST ANDBY/ON HIDE INPUT ST ANDBY/ON MENU ENTER EXIT Light on (Red): Warning mode ( p P37 ) Light on/Blinking (Orange): Lamp warning ( p P37 ) To turn on/off the power To hide the image temporarily ( p P21 ) To return to the previous menu To switch inp ...
-
JVC DLA-RS1X - page 12
12 Controls and Features (Continued) 1 Getting Star ted Remote Control PROJECT OR OPERA TE LIGHT TE S T EXIT S HARP - S HARP + U S ER 2 S -VIDEO VIDEO A S PECT HDMI 2 OFF ........ ........ HDMI 1 COMP . N NA TURAL CINEMA D YNAMIC COLOR TEMP GAMMA U S ER 3 D COLOR - COLOR + U S ER 1 C CONTRA S T BRIGHT HIDE INFO MENU ENTER ON To turn on the powe ...
-
JVC DLA-RS1X - page 13
13 Getting Started Preparation Basic Operation Settings Troubleshooting Others ENGLISH How to Use the Remote Control z If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. When t his happens, replace the batteries. In sert the batterie s according to the +- marks. z Be sure to inse ...
-
JVC DLA-RS1X - page 14
2 Prepara tion 14 Selecting Connecting Devices z Do not turn on the power until connecti on is complete. z The connection pro cedures differ ac cording to the device used. For de tails, refer to the instruc tion manual of the device to be connected. z For audio output, connect the device to an amplifier. z The images may not be displayed depending ...
-
JVC DLA-RS1X - page 15
15 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others Connecting Connecting via Video Cable Connecting via S-video Cable S -VIDEO HDM R S -232C MPONENT VIDEO S YNC Y C B /P B C R /P R GBR S - V I D E O H D M R S - 2 3 2 C M P O N E N T Y C B / P B C R / P R G B R Video cable (sold separately) VCR and camcorder Video ...
-
JVC DLA-RS1X - page 16
16 Connecting (Continued) 2 Prepara tion z Set “COMP” i n the se tting menu to “Y Pb/Cb Pr/Cr”. ( p P28 - Q ) Connecting via HDMI Cable Or HDMI-DVI Conversion Cable Connecting via Component Video Cable S -VIDEO HDMI 2 HDMI 1 R S -232C COMPONENT VIDEO S YNC Y C B /P B C R /P R GBR S - V I D E O R S - 2 3 2 C C O M P O NE N T V I D E O S Y N ...
-
JVC DLA-RS1X - page 17
17 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others z Set “COMP” in the setting menu to “SCART”. ( p P28 - Q ) z Set “COMP” in the setting menu to “RGB ”. ( p P28 - Q ) z For information on compatible input signals, see “Specifi cations”. ( p P49 ) Connecting via SCART-RCA Cable Connecting via ...
-
JVC DLA-RS1X - page 18
2 Prepara tion 18 Installing the Projector and Screen Install this unit and the screen. Place thi s unit and the screen perpendi cular to each other. Failing to do so may give rise to trapez oida l distortion of the projected image. A Install the projector and screen 80% 34% 34% 80% S-VIDEO MDMI2 MDMI 1 RS-232C COMPONENT VIDEO SYNC Y C B /P B C R / ...
-
JVC DLA-RS1X - page 19
19 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others B Adjust such that the projected im age is in the center of the screen z It may be necessary to set “Pixel Adjust” in the setting menu afte r adjusting the image position. ( p P27 - J ) Determine the distance from the lens to the scree n to achieve yo ur desi ...
-
JVC DLA-RS1X - page 20
20 3 Basic Operat ion Projecting Image ...................................................................... . Preparation z Remove the lens cap. A Insert the power plug to the power outlet B Turn on the power C Project the image a Select input mode b Play back the selected device D Adjust the position of the projection screen This section desc ri ...
-
JVC DLA-RS1X - page 21
21 Getting Started Preparation Basic Operation Settings Troubleshooting Others ENGLISH E Adjust the image size (zoom) F Adjust the focus G Turn off the power Hold and rotate the tab z The power cannot be turned off withi n approximately 90 seco nds after it has been turned on. Start oper ation only after 90 seconds time. z You can also press the [S ...
-
JVC DLA-RS1X - page 22
22 3 Basic Operat ion Convenient Features during Projection The projected image can be set to a most appropr iate screen size (aspect ratio). z The screen size ca n also be set fro m “Aspect” of the setting menu. ( p P29 - S ) z When high definition images are input, the screen size is fixed at “16:9”. Input Image and Projected Image by ...
-
JVC DLA-RS1X - page 23
23 Getting Started Preparation Basic Operation Settings Troubleshooting Others ENGLISH B Mask the image a Display the setting menu b Select “Setup” g “Mask” c Set a mask value C To end z Masking is available only wh en high definition images are input. MEMO Setup Image Source Install. Func. Info. Image Adjust Color Temp. Gamma Offset Pixel ...
-
JVC DLA-RS1X - page 24
24 4 Settings Setting Menu Example: When changing “Aspect” from “4:3” to “16:9” A Display the setting menu B Select “Source” g “Aspect” C Set to “16:9” D To end Projected image s can be adjusted to a desi red view by changing the defa ult settings. Procedures for Menu Operation PROJECT OR OPERA TE LIGHT TEST EXIT SHARP - SHA ...
-
JVC DLA-RS1X - page 25
25 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others Item values show n in are factory sett ings. z Items that can be configured differ according to the input signals. z “Contrast”, “Brightness” , “Color” an d “Sharpness” can also be configur ed from the remote control. ( p P12 ) z “Tint” can on ...
-
JVC DLA-RS1X - page 26
4 26 Setting Menu (Continued) Settings z “Normal” is suitable for normal circumstances but other se ttings can be selected ac cording to your preferences. z This setting can also be co nfig ured from the remote control. ( p P12 ) * “Gamma Adjust” A Select the reference gamma curve coefficient (1.8 f 2.6) in “Correction Val ue”. B Select ...
-
JVC DLA-RS1X - page 27
27 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others z The horizontal and verti cal directions are reversed when the im age is flip ped to the left or right, o r flipped up or down. z To adjust, use still images with distinct ou tlines. z As the adjustments are minor, the effect may be difficult to see for some ima ...
-
JVC DLA-RS1X - page 28
4 28 Setting Menu (Continued) Settings z The display position value varies with the input signal. z This adjustment is available onl y for analog input signals. z This setting is availabl e only when projecting the HDMI input. z Masking is available only when high definition images are input. z This setting is availabl e only when projecting the co ...
-
JVC DLA-RS1X - page 29
29 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others z When high definition images are input, the screen size is fixed at “16:9”. z This setting can also be configur ed from the remote control. ( p P12 , 22 ) z This setting is available only wh en projecting the vi deo or S-video input. z This settin g can only ...
-
JVC DLA-RS1X - page 30
4 30 Setting Menu (Continued) Settings Install. > Menu Display X Menu Display Sets the duration fo r displaying the menu. 15 sec Displays for 15 seconds. On Always display. Install. > Line D isplay a Line Disp lay Sets whether to display the input when switching input. 5 sec Displays for 5 seconds. Off Do not display. Install. > Flip H b F ...
-
JVC DLA-RS1X - page 31
31 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others z Changing the lamp power will not change the lamp time (lamp life). z The setting cannot be changed within approximatel y 90 seconds after this unit has been turne d on. z Settings cannot be c hanged within approxim ate ly 60 seconds after they are made. z This ...
-
JVC DLA-RS1X - page 32
32 4 Settings Customizing Projected Images “Contrast”, “Brightness”, “Color”, “Sharpn ess”, “DNR”, “C olor Temp.”, “Gamma” and “Offset” are registered in the image profile. A Select the image profile B Adjust image quality Example: To adjust “Contrast ” a Display the setting menu b Select “Image” g “Image A ...
-
JVC DLA-RS1X - page 33
33 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others A Select the image profile B Adjust image quality C Register the image profile a Display the setting menu b Select “Setup” g “Profile Memory” c Register the setting D To end Registering User-def ined Image Profiles z See “Changing the Default Image Prof ...
-
JVC DLA-RS1X - page 34
5 34 Troubleshooting Troubleshooting Before sending the unit to your authorized d ealer for re pair, check the follo wing points. The following situations ar e not malfunctions. You do not need to worry under the following situat ions if there is no abnormal ity on the screen. z Part of the top surfac e or front of the u nit is hot. z A creakin ...
-
JVC DLA-RS1X - page 35
35 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others Video image is fuzzy Is the focus correctly adjusted? Adjust accordingly using t he focus adjustment ring. p P21 Is the unit placed too near or too far away from the screen? Set the unit at a correct distance from the screen. p P18 , 19 Video images are missin g ...
-
JVC DLA-RS1X - page 36
5 36 Troubleshooting What to Do When These Messages Are Displayed Message Cause (Detail s) No device is connected to the input terminal. The input terminal is connecte d but there is no signal. g Input the video signals. A video signal that cannot be used in this unit has been input. g Input video signals that can be used. The message is displayed ...
-
JVC DLA-RS1X - page 37
37 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others About Warning Indicators The accumulated lamp time or warning mode of this unit is displayed by the indicators. For information on indicator dis play during normal operation, see “Controls and Features” ( p P10 ). When the unit enters in to warning mode (No. ...
-
JVC DLA-RS1X - page 38
38 5 Troubleshooting Replacing the Lamp A Remove the lamp cover B Loosen the screws on the lamp unit C Pull out the lamp unit The lamp is a cons umable item. If the image is dark or the lamp is turned off, replace the lamp unit. z When the lamp replacement time approach es, a message is disp layed on the screen and the condition is indicated by the ...
-
JVC DLA-RS1X - page 39
39 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others D Install the new lamp unit E Tighten the screws of the lamp unit F Attach the lamp cover z Fasten the screws with a + screwdriver. z Insert the top part (with 2 claws) of the lamp cover into the unit. z Fasten the screws with a + screwdriver. z Use only genuine ...
-
JVC DLA-RS1X - page 40
40 Replacing the Lamp (Continued) 5 Troubleshooting After installin g a new lamp unit, reset the lamp time. A Insert the power plug to the power outlet B Reset lamp time Resetting Lamp Time z The [LAMP] indicator and [STANDBY/ON] indicator blink alternately for 3 seconds. After that, the unit switches to standby mode. PROJECT OR OPERA TE LIGHT TEST ...
-
JVC DLA-RS1X - page 41
41 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others Cleaning and Replacing the Filter A Remove the inner filter B Clean the filter C Reinstall the inner filter Clean the filt er regularly or air intake eff iciency may deterio rate and malfunction may occur. z Wash the filter wi th water and dry it in a shaded area ...
-
JVC DLA-RS1X - page 42
6 42 Others RS-232C Interface Control of this unit via a computer is possible by connecting the computer to this unit with a RS-2 3 2C cross cable (D-Sub 9 pin). The command between this un it and the computer consists of “Header”, “Unit ID”, “Co mmand”, “Data” and “End”. z Header (1 byte), Unit ID (2 b ytes), Comman d (2 bytes) ...
-
JVC DLA-RS1X - page 43
43 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others Command and data Operating command and data (Binary code) Command Type Data description 0000 Connection check Checks whether communication is available between this unit and the PC during standby. 5057 Power supply During stan dby 31 : Turns on the power. Dur ...
-
JVC DLA-RS1X - page 44
44 RS-232C Interface (Continued) 6 Others Reference command and data (Binary co de) End This code indicates the end of communicat ion. The binary code is fixe d at “0A”. Command Type Data description 5057 Power supply During standby or power on 30 : Standby mode 31 : Power-on mode 32 : During Cool Down mode 34 : Warning mode 4950 Input Duri ...
-
JVC DLA-RS1X - page 45
45 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others Remote control code z Binary code is sent during communication . Remote control button name Binary code Remote control button name Binary code J 37 33 30 31 USER1 37 33 36 43 K 37 33 30 32 USER2 37 33 36 44 EXIT 37 33 30 33 USER3 37 33 36 45 OPERATE ON 37 33 ...
-
JVC DLA-RS1X - page 46
6 46 Others This section shows the communication examples of RS-232C. Operating command Reference command RS-232C Communication Examples Type Command Description Connection check PC T h i s u n i t :2 18 90 10 00 00 A This unit PC: 06 89 01 00 00 0A Checks connection Power (On) PC This unit: 21 8 9 01 50 57 3 1 0A This unit ...
-
JVC DLA-RS1X - page 47
47 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others Copyright and Caution z HDMI, HDMI logo and high definition mu ltimedia inte rface are trademarks or regist ered trademarks of HDMI Licensing LCC. z This product uses Ricoh Tr ueType fonts ma nufactured and sold by Ricoh Co., Ltd. ................................ ...
-
JVC DLA-RS1X - page 48
6 48 Others Measures to prevent t he unit from toppling or dro pping should be taken for safet y reasons and accident prevention during emergencies in cluding earthquakes. When mounting th is unit on a pedestal or ceiling, remove the 4 feet on the bottom surface and use all the 4 screw holes (M5 screws) to mount. ................................... ...
-
JVC DLA-RS1X - page 49
49 ENGLISH Getting Started Preparation Basic Operation Settings Troubleshooting Others Specifications * 1 D-ILA is the abbreviation for Di rect drive Image Light Amplifier. * 2 D-ILA devices are manufactured using extr emely high-precision te chnology. Pixel effect iveness is 99.99 %. Only 0.01 % or less of the pixels are either missing or woul d r ...
-
JVC DLA-RS1X - page 50
6 50 Others (Unit: mm) Dimensions 77 227.5 172.5 21.5 42 41 8 .5 12 455 8 1 3 00 2 3 0 6 8 .5 88 .5 14 9 .5 245.5 Center of Lens Front Left Side Top Surface Bottom Surface DLA-RS1X_EN.book Page 50 Wed nesday, December 19, 2007 1:09 PM ...
-
JVC DLA-RS1X - page 51
Printed in Japan 1207TTH-SW-VP D-ILA PROJECTOR PROJECTEUR D-ILA PROYECTOR D-ILA DLA-RS1X FOR SERVICING (Only in U.S.A.) © 2007 Victor Company of Japan, Limited DLA-RS1X_EN.book Page 52 Wed nesday, December 19, 2007 1:09 PM ...
Do you have a question concerning JVC DLA-RS1X?
Use the form below
If you did not solve your problem by using a manual JVC DLA-RS1X, ask a question using the form below. If a user had a similar problem with JVC DLA-RS1X it is likely that he will want to share the way to solve it.