Manual Moog Videolarm DDW10CR

20 pages Not applicable
Download

Go to site of 20

Summary
  • Moog Videolarm DDW10CR - page 1

    www .videolarm.com © 2009-2010, Moog Videolarm, Inc. All Rights Reserved D e p u t y D o m e Bullet-Resistant Standard / Pressurized Dome Installation and Operation Instructions for the following models: DDW10CR1 DeputyDome™ Series, 10-gauge Steel Bullet-Resistant Outdoor dome PTZ Camera System with 26x Day/Night Camera, onboard receiver /driver ...

  • Moog Videolarm DDW10CR - page 2

    IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS UNPACKING SERVICE 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8 Cable Runs- ...

  • Moog Videolarm DDW10CR - page 3

    LIMITED W ARRANT Y FOR VIDEOLARM INC. PRODUC TS VIDEOLARM INC. warrants this Product to be free from defects in material or work manship, as follows: PRODUCTCA TEGORY P ARTS LABOR All Enclosures and Electronics Five (5) Y ears Five (5) Y ears Pan/T ilts Three (3) Y ears **6 months if used in autoscan Three (3) Y ears **6 months if used in autoscan ...

  • Moog Videolarm DDW10CR - page 4

    DDW10CR PDDW10CR DDW10CR1 (N) 115 VAC, 90 vA, 0.8 Amps DDW10CR2 (N) 24 VAC, (Class 2), 90 vA, 3.75Amps (N) Network model CAMERA SPECIFICATIONS Resolution - 470 TVL - NTSC, 460TVL - PAL Minimum Illumination - 1.0 1.0 Lux Zoom Ratio - 26x, 3.5 -91mm optical, 321x digital Format - ¼” White Balance - Auto Electronic Shutter - 22 steps Electrical Spe ...

  • Moog Videolarm DDW10CR - page 5

    Remove (2) tamper resistant with the security tool provided in the packet. • Quite (2) a pisón resistente con la herramienta de la seguridad proporcionada en el paquete. • Enlevez (2) le bourreur résistant avec l'outil de sécurité fourni dans le paquet. • Entfernen Sie (2) den Besetzer, der mit dem Sicherheit Werkzeug beständig ist, ...

  • Moog Videolarm DDW10CR - page 6

    Wiring for DDW10CR • Cableado para DDW10CR • Câblage pour DDW10CR • Verdrahtung für DDW10CR • Fiação para DDW10CR • Collegamenti per DDW10CR 2 1 4 3 1 2 3 2 1 6 5 4 A B C D E 1 2 3 Wiring Chart Non-Pressurized Receiver V ersion A. Heater 24VAC 115VAC 1) Red - Heater 1 2) N/C 2.4A .5A 3) Red - Heater B. Camera Pow er (58W) (58W) 1) Bla ...

  • Moog Videolarm DDW10CR - page 7

    To remove Pan/Tilt assembly rmove the dome and liner • Para eliminar Pan / Inclinación rmove montaje de la cúpula y de línea • Pour supprimer Pan / Tilt rmove montage du dôme et doublure • So entfernen Sie Pan / Tilt rmove Montage der Kuppel und Linienkonfer - enzen • Para remover Pan / Tilt rmove montagem da cúpula e forro • Per rim ...

  • Moog Videolarm DDW10CR - page 8

    To attach dome inserts most align properly with housing • Para adjuntar cúpula alinear correctamente la mayoría de las inserciones de la vivienda • Pour joindre la plupart des inserts dôme aligner correctement avec le logement • So hängen die meisten Einsätze Kuppel Angleichung richtig mit Gehäuse • Para anexar cúpula insere mais ali ...

  • Moog Videolarm DDW10CR - page 9

    When pressurizing unit be sure to set the guage or regulator from 10-20psi (.7-1.4bar). • Al presurizar la unidad sea seguro fijar la medida o el regulador de 10-20psi (7-1.4bar). • En pressurisant l'unité soyez sûr de placer la jauge ou le régulateur de 10-20psi (7-1.4bar). • Wenn Sie Maßeinheit unter Druck setzen, seien Sie sicher, ...

  • Moog Videolarm DDW10CR - page 10

    Address SW1 SW2 SW3 SW4 SW5 SW6 Address SW1 SW2 SW3 SW4 SW5 SW6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 O On On On On On On O On On On On O O  On On On On On On O On On On O On O  On On On On O O  On On On O O  O On On On On On On O On On O On On O On On On O On O  On On O O  On O On ...

  • Moog Videolarm DDW10CR - page 11

    CHART 2 - P AR AMETER DIP SWITCH SETTINGS Switch Settings SW6 Address data - On ( Closed) SW5 A4 SW4 A3 SW3 A2 SW2 A1 SW1 A0 C ONTROL FUNCTIONS UNIT P AR AMETERS Alarm sense, camera on-screen display and baud rate can all be controlled by the dipswitches. The alarm sense can be set to accept either con tact closures (NO) or contact openings (NC) as ...

  • Moog Videolarm DDW10CR - page 12

    22 21 20 19 18 17 16 15 13 12 11 10 9 8 7 6 5 4 3 2 1 31 30 29 28 27 26 25 Part Number Description Qty. 1 91-NTFL01 3/8-16 Flange Nut 4 2 90-BTSEC06 1/4-20X 1/2" Secur ity screw SS 2 3 50-VL1428 DDWC10 housing body 1 4 30-VL1405 DDWC10 accs mounting bracket 1 5 92-WSFL01 1/4 Flat W asher SS 4 6 92-WSSL01 1/4 Split Lockwasher SS 4 7 90-BTHH32 1 ...

  • Moog Videolarm DDW10CR - page 13

    40 39 38 37 36 35 57 56 55 54 53 67 66 65 64 63 62 61 60 59 58 70 69 68 79 78 77 76 75 52 51 50 49 48 47 46 45 44 43 42 41 ...

  • Moog Videolarm DDW10CR - page 14

    VL-422 C ommunication Protoc ol (DeputyDome) 1 Message Forma t Data is transmitted at 9600 baud, 1 star t bit, 1 stop bit, 8 data bits (lsb rst), no parity. The general format for messages sent to the DeputyDome and for inquiry response messages sent by the DeputyDome is shown below: BYTE DA T A DESCRIPTION 1 F8H Sync character 2 Address in hex ...

  • Moog Videolarm DDW10CR - page 15

    3.2 Pr eset Command Messages These commands contr ol the position presets and some of the operational parameters of the pan/tilt platf orm. Byte number 1 is the start of message “F8” , byte number 2 is the device address (default = 01), and byte number ve is the message t erminator byte. Not e that preset 63 is reserved for another function; ...

  • Moog Videolarm DDW10CR - page 16

    7 E2 (MS nibble) 30H - 3FH Position data is 30H or ed with data nibble E11, E10, E09, E08 of elevation data. 8 E1 30H - 3FH Position data is 30H or ed with data nibble E07, E06, E05, E04 of elevation data. 9 E0 (LS nibble) 30H - 3FH Position data is 30H or ed with data nibble E03, E02, E01, E00 of elevation data. 10 T erminator and Checksum 80H - 8 ...

  • Moog Videolarm DDW10CR - page 17

    BYTE DA T A DESCRIPTION 1 F8H Sync character 2 Address in hex C amera address (01H - DFH) 3 “v ” Lower case “v” 4 Z2 (MS nibble) 30H - 3FH Position data is 30H or ed with data nibble Z11, Z10, Z09, Z08 of zoom lens position data. 5 Z1 30H - 3FH Position data is 30H or ed with data nibble Z07, Z06, Z05, Z04 of zoom lens position data. 6 Z0 ( ...

  • Moog Videolarm DDW10CR - page 18

    6 Z0 (LS nibble) 30H - 3FH Position data is 30H or ed with data nibble Z03, Z02, Z01, Z00 of zoom lens position data. 7 F2 (MS nibble) 30H - 3FH Position data is 30H or ed with data nibble F11, F10, F09, F08 of focus data. 8 F1 30H - 3FH Position data is 30H or ed with data nibble F07, F06, F05, F04 of focus data. 9 F0 (LS nibble) 30H - 3FH Positio ...

  • Moog Videolarm DDW10CR - page 19

    4 30H - 38H bit0 (lsb) Auto Iris; 0 = auto , 1 = manual bit1 Camera power; 0 = o , 1 = on bit2 Lens speed; 0 = slow; 1 = fast bit3 Comm. error; 0 = no , 1 = yes bit4 - bit7 = 0011. 5 “ A” Upper case “ A ” 6 30H - 31H bit0 (lsb) aux output; 0 = o , 1 = on 7 T erminator and Checksum 80H - 8FH Most signicant nibble is always 8. L east ...

  • Moog Videolarm DDW10CR - page 20

    P r oduc t Registra tion/W arran t y Thank you f or choosing Videolarm. We value y our patronage and ar e solely committed to providing y ou with only the highest quality products available with unmatched customer service levels that ar e second-to-none in the security industr y. Should a problem arise, r est assure that V ideolarm stands behind it ...

Manufacturer Moog Videolarm Category Security camera

Documents that we receive from a manufacturer of a Moog Videolarm DDW10CR can be divided into several groups. They are, among others:
- Moog Videolarm technical drawings
- DDW10CR manuals
- Moog Videolarm product data sheets
- information booklets
- or energy labels Moog Videolarm DDW10CR
All of them are important, but the most important information from the point of view of use of the device are in the user manual Moog Videolarm DDW10CR.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Moog Videolarm DDW10CR, service manual, brief instructions and user manuals Moog Videolarm DDW10CR. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Moog Videolarm DDW10CR.

A complete manual for the device Moog Videolarm DDW10CR, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Moog Videolarm DDW10CR by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Moog Videolarm DDW10CR.

A complete Moog Videolarm manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Moog Videolarm DDW10CR - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Moog Videolarm DDW10CR, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Moog Videolarm DDW10CR, that we can find in the current document
3. Tips how to use the basic functions of the device Moog Videolarm DDW10CR - which should help us in our first steps of using Moog Videolarm DDW10CR
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Moog Videolarm DDW10CR
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Moog Videolarm DDW10CR in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Moog Videolarm DDW10CR?

Use the form below

If you did not solve your problem by using a manual Moog Videolarm DDW10CR, ask a question using the form below. If a user had a similar problem with Moog Videolarm DDW10CR it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)