English dropdown-ico

Manual Zebra Technologies Z6M

112 pages 3.25 mb
Download

Go to site of 112

Summary
  • Zebra Technologies Z6M - page 1

    Custo mer order # 1 135 6L Manu f actur er par t # 11356LB Re v. 1 ...

  • Zebra Technologies Z6M - page 2

    ii Zebra Z 4M/ Z 6M Printers User’s Guide 3URSULHWDU6WD WHPHQW This manual cont ains propr ietar y inf ormati on of Zeb ra T echno logie s Co rpor ation. It is inte nded solel y for the informati on a nd use of par ties operating and maintaini ng t he equi pm e nt desc rib ed herein. Such propriet ary informati on may not be used , reproduce ...

  • Zebra Technologies Z6M - page 3

    Zebra Z 4M/ Z 6M Printers User’s Guide iii ...

  • Zebra Technologies Z6M - page 4

    iv Zebra Z 4M/ Z 6M Printers User’s Guide ...

  • Zebra Technologies Z6M - page 5

    Zebra Z 4M/ Z 6M Printers User’s Guide v 2AOlÍyÍÏlÏÆ :lYl ³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³ ³³³³³³³³³³³³³³³³ ¦ Hello! ............ .................. ........................... .................. ........................... ... ...

  • Zebra Technologies Z6M - page 6

    vi Ze bra Z 4M/ Z 6M Printers User’s Guide ÆÏAOÆÍØYAÏ ³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³ ¦Ê System Consi derations . .................. ........................... .................. .................. ........ 17 Interfaces .......................... ............ ...

  • Zebra Technologies Z6M - page 7

    Zebra Z 4M/ Z 6M Printers User’s Guide vii Lubricati on ...................... ........................... .................. ........................... ............... 65 Printhe ad Pressure Adjus tment ................. ........................... .................. ............... 65 Rewind Media Alignment ................. ......... ........ ...

  • Zebra Technologies Z6M - page 8

    viii Zeb ra Z 4M/ Z 6M Printers User’s Guide ...

  • Zebra Technologies Z6M - page 9

    Zebra Z 4M/ Z 6M Printers User’s Guide 1 :l  Y   l +HOOR • This use r ’ s guide prov ides all the in formation you need to operat e the Z 4M™ or Z 6M™ prin ter . •T h e ZPL II ® Pr ogramming Guide V olume I an d V olume II (pa rt # 45540L) detail s how to cre ate th e perfec t label f ormat for your ap plication. The guid e ...

  • Zebra Technologies Z6M - page 10

    2Z e b r a Z 4M/ Z 6M Printers User’s Guide 5HSR UWLQ J' DPDJH If you di scover sh ipping damag e: • Immediate ly not ify the s hippin g company and f ile a damag e report. Zebra T echnologies Co rporation is not r esponsibl e for any d amage inc urr ed during the shipment of the equ ipment and will not r epair this damage under war ran ...

  • Zebra Technologies Z6M - page 11

    Zebra Z 4M/ Z 6M Printers User’s Guide 3 3 ULQWHU3 RZHU The power s upply i n the pri nter a utomatica lly de tects th e appli ed line v oltag e and works in t he 90 to 26 5 V AC range. :$51,1*  )RUS HUVRQQHOD QGHTX LSPHQWVDI HWDOZD VXVHD  WKUHHSURQ JSOXJ ZLWKDQ HDUWKJURX QGFRQ QHFWLRQ ...

  • Zebra Technologies Z6M - page 12

    4Z e b r a Z 4M/ Z 6M Printers User’s Guide 3 ULQWHU2YHUYLHZ Figure 2 shows the b asic c omponents of you r prin te r . Dependin g on insta lled o ptions , your pri nter may look s lightly dif feren t. Figur e 2 Media Supply Guide Media Guide Ribbon Sensor Media Supply Hanger Media Alignment Spindle Printhead Open Lever T ake -up Spindle Rewin ...

  • Zebra Technologies Z6M - page 13

    Zebra Z 4M/ Z 6M Printers User’s Guide 5 AOÃAÏÍÏlÍ-ÃÏlà This chap ter of the user’ s guide is so impo rtant th at we’ve pr inte d it on a di f ferent colo r paper ! That way , it will be easy fo r you to f ind when you must ca libr ate (s et u p) the pri nter f or your pa rtic ular appl ication . 3 XUSRVH ? ...

  • Zebra Technologies Z6M - page 14

    6Z e b r a Z 4M/ Z 6M Printers User’s Guide 7 SHVRI0HGL D 1RQ&RQWLQXRXV :HE0HGL D Non-conti nuous we b media (re fer to Figur e 3) refe rs to individua l labels that are separat ed by a gap, notch, o r hole. When y ou look at the media, yo u can t ell where one labe l ends and the next one begin s. Figur e 3 Non-continuous med ...

  • Zebra Technologies Z6M - page 15

    Zebra Z 4M/ Z 6M Printers User’s Guide 7 1RQ&RQWLQXRXV %OD FN0D UN0HGL D Non-conti nuous b lack mark media h as bla ck marks pri nted on t he back of t he liner mate rial th at ind icate the st art and e nd of e ach la bel (r efer to Figu re 4). &RQWLQXRXV 0HGLD Continuou s media (re fer to Fi gure 5) i s one unint errup ...

  • Zebra Technologies Z6M - page 16

    8Z e b r a Z 4M/ Z 6M Printers User’s Guide &KRRVLQJWKH3ULQW0RGH •I n tear -off mode, eac h label ( or a st rip of l abels) ca n be torn o f f after it is pr inted . •I n peel -off mode, liner mat erial is peeled away from the label as it is pri nted. Afte r this la bel is remov ed fro m the pr inter, the ne x t one i s prin ted. ...

  • Zebra Technologies Z6M - page 17

    Zebra Z 4M/ Z 6M Printers User’s Guide 9 3 RVLWLR QLQJWKH0HGLD6 HQVRU The corre ct posit ion ing of the medi a se nsor i s i mp ort ant — it can ma ke t he d if f er enc e between a perfect label and a call to T echnical S upport ! There ar e two medi a sensors in this print er: “ref lective ” and “tr ansmiss ive.” 5HIOHFWL YH? ...

  • Zebra Technologies Z6M - page 18

    10 Zeb ra Z 4M/ Z 6M Printers User’s Guide $GMXVWLQJ WKH5 HIOHFWLYH6 HQVRU Refer t o Figure 7. 1. Ope n the pri nthead ass embly by p ressing t he print head open l ever . 2. Lo cate the r eflect ive sensor positio ning l ever . 3. Move the r efle ctive senso r posi tioni ng le ver a cross the width of t he media un til the refle ctive s ...

  • Zebra Technologies Z6M - page 19

    Zebra Z 4M/ Z 6M Printers User’s Guide 11 /RDG LQ JW KH 5LE ERQ Refer t o Figure 8. For more de tailed i nformati on, refer to the ins tructions that b egin on page 34. Figur e 8 Ribbon Supply Spindle Ribbon T ake -up Spindle Printhead Open L ever Ribbon Guide Plate Printhead Assembly ...

  • Zebra Technologies Z6M - page 20

    12 Zeb ra Z 4M/ Z 6M Printers User’s Guide $XWR&DOLEUDWLRQ During au to calibr atio n, the pri nter dete rmines the label length a nd media/ri bbon sensor s ettings . Auto calib ratio n occu rs whe n the p rinte r is tur ned o n and e ach ti m e the printe r recover s from an er ror c ondition. (T o clear an er ror , open and cl ose the pr ...

  • Zebra Technologies Z6M - page 21

    Zebra Z 4M/ Z 6M Printers User’s Guide 13 2SHUDWRU&RQWUROV 32:(5 6Z LWFK The POWER swit ch is lo cated at t he back of the print er above t he power co rd. T urn on th e printer . )URQW3 DQHO For a mo re detai led expla nation of the fr ont panel keys an d lights (shown in Figure 9 ), refer to the ins tructi ons that b egin on page 1 ...

  • Zebra Technologies Z6M - page 22

    14 Zeb ra Z 4M/ Z 6M Printers User’s Guide &RQILJXULQJWKH3ULQWHU The confi gurat ion proce dure in T able 1 contai ns the i nformatio n you ne ed to get your printe r up and runnin g, but it i s not compr ehensive . Re fer to p age 37 for mo r e infor mati on. 1. Pr ess the SET UP/EXIT key at the “PRI NTER READY” display to enter th ...

  • Zebra Technologies Z6M - page 23

    Zebra Z 4M/ Z 6M Printers User’s Guide 15 &RQILJXULQJWKH6RIWZDUHRU3ULQWHU'ULYHU Many print er sett ings may also be con trolled by your printer’ s driver or lab el prepa ratio n soft ware . Refer to the drive r or so ftwar e doc umen t atio n for mo r e infor mati on. 3 ULQWLQJD7 H VW/DEHO T o print a test ...

  • Zebra Technologies Z6M - page 24

    16 Zeb ra Z 4M/ Z 6M Printers User’s Guide ...

  • Zebra Technologies Z6M - page 25

    Zebra Z 4M/ Z 6M Printers User’s Guide 17 ÆÏAOÆÍØYAÏ 6VWHP&RQVLGHUD WLRQV ,QWHUIDF HV The method o f interf acing this pri nter to a data sour ce depe nds on the communic ation opt ions i nstalle d in the pr inter . The stan dard inte rfaces a re an RS-232/RS- 422/RS-485 se rial dat ...

  • Zebra Technologies Z6M - page 26

    18 Zeb ra Z 4M/ Z 6M Printers User’s Guide When communica ting via t he paral lel port (r efer to Figure 12), the pr eviously mentioned parameter s are not conside red. For seri al an d paralle l pinout and technic al in format ion, re fer to “Append ix” begin ning on page 87. &DEOLQJ 5HT XLUHPHQWV  Data cable s mus t b e full y ...

  • Zebra Technologies Z6M - page 27

    Zebra Z 4M/ Z 6M Printers User’s Guide 19 -ÃÏlÃÍ AÆYÆ ) URQW3 DQH O This sec tion d iscusses the funct ions of t he cont rols and i ndicator s on the pr inter . Beco me fam iliar with e ac h of th ese fu ncti ons be fore o p erati ng the print er . )URQ W3D QH O'LVS OD The front panel di splay (sh own in Fi gure 1 ...

  • Zebra Technologies Z6M - page 28

    20 Zeb ra Z 4M/ Z 6M Printers User’s Guide )URQ W3D QH O.H V Key Function FEED Forces the printer to feed one blank label each time the key is pressed. • Printer not pr inting: one blank label imm ediately feeds. • Printing: one blank label feeds after the cu rrent batch of labels is complete. PA U S E St arts and stops the printing pr ...

  • Zebra Technologies Z6M - page 29

    Zebra Z 4M/ Z 6M Printers User’s Guide 21 )URQ W3D QH O/LJK WV Light St atus Indication POWER Off The printer is off or no power is applied. On The printer is on. PA U S E Off Normal printer operation. On The printer has stopped all printing operations. Flashing In peel-off mode, t he P AUSE light flashes when the label is available for rem ...

  • Zebra Technologies Z6M - page 30

    22 Zeb ra Z 4M/ Z 6M Printers User’s Guide 5ROO0HGLD /RDGLQJ 7HDURII0 RGH Refer t o Figure 14. 1. Pr ess the p rinthead open le ver . The pr inthead as sembly s prings up. 2. Fl ip down the media su pply guide. 3. Sl ide out t he media guide as f ar from th e prin ter fra me as possib le. 4. Pl ace the r oll of medi a on the med ia su ...

  • Zebra Technologies Z6M - page 31

    Zebra Z 4M/ Z 6M Printers User’s Guide 23 &XWWHU0 RGH (Cutter option r equire d) Refer t o Figure 15. 1. Pr ess the p rinthead open le ver . The pr inthead as sembly s prings up. 2. Fl ip down the media su pply guide. 3. Sl ide out t he media guide as f ar from th e prin ter fra me as possib le. 4. Pl ace the r oll of medi a on the med ia ...

  • Zebra Technologies Z6M - page 32

    24 Zeb ra Z 4M/ Z 6M Printers User’s Guide 9DOXH3HHO RII0 RGH (V alue peel-o ff o ption req uired) Refer t o Figure 16. 1. Pr ess the p rinthead open le ver . The pr inthead as sembly s prings up. 2. Fl ip down the media su pply guide. 3. Sl ide out t he media guide as f ar from th e prin ter fra me as possib le. 4. Pl ace the r oll of m ...

  • Zebra Technologies Z6M - page 33

    Zebra Z 4M/ Z 6M Printers User’s Guide 25 Figur e 16 Media Guide Dancer Ribbon Sensor Lab el V alue Pe e l Lever Printhead Open L ever Printhead Assembly Media Supply Guide Media Supply Hanger T ransmissive Sensor T ear-off/ P eel- off Bar V alue Peel Assembly ...

  • Zebra Technologies Z6M - page 34

    26 Zeb ra Z 4M/ Z 6M Printers User’s Guide /LQHU7 DNHXS0RG H (Lin er take- up option r equir ed) NOTE: This option is avail able on t he Z4M p rinte r only . Refer t o Figure 17. 1. Pr ess the p rinthead open le ver . The pr inthead as sembly s prings up. 2. Fl ip down the media su pply guide. 3. Sl ide out t he media guide as f ar from ...

  • Zebra Technologies Z6M - page 35

    Zebra Z 4M/ Z 6M Printers User’s Guide 27 17. If the print er is paus ed (the P AUSE light is on), pr ess the P AUSE key to enable printi ng. Peeling starts automatica lly . Press the F EED key to t est. Liner Removal 1. Pu ll th e line r s li de toward y ou ( see inset ) unt il it stops ( about a third of the way down the li ner take-up spindle) ...

  • Zebra Technologies Z6M - page 36

    28 Zeb ra Z 4M/ Z 6M Printers User’s Guide 3RZHU 3HHO5 HZLQG3HHO 0RGH (Power pe el/rew ind optio n requi red) Refer t o Figure 18. 1. Pr ess the p rinthead open le ver . The pr inthead as sembly s prings up. 2. Fl ip down the media su pply guide. 3. Sl ide out t he media guide as f ar from th e prin ter fra me as possib le. 4. P ...

  • Zebra Technologies Z6M - page 37

    Zebra Z 4M/ Z 6M Printers User’s Guide 29 16. Close the pr inthead a ssembly . 17. Close the va lue peel a ssembly usi ng the val ue peel lever . 18. If the print er is paus ed (the P AUSE light is on), pr ess the P AUSE key to enable printi ng. Peeling starts automatica lly . Press the F EED key to t est. Liner Removal 1. Cut the lin er mate ria ...

  • Zebra Technologies Z6M - page 38

    30 Zeb ra Z 4M/ Z 6M Printers User’s Guide 3RZHU3 HHO5HZ LQG5HZ LQG0RGH (Power re wind opt ion requi red) Refer t o Figure 19. 1. Pr ess the p rinthead open le ver . The pr inthead as sembly s prings up. 2. Fl ip down the media su pply guide. 3. Sl ide out t he media guide as f ar from th e prin ter fra me as possib le. 4. Pl ac ...

  • Zebra Technologies Z6M - page 39

    Zebra Z 4M/ Z 6M Printers User’s Guide 31 14. Slide the rewi nd media gui de against the media, and ti ghten the thumbscrew t o lock it into position. 15. Close the pr inthead a ssembly . 16. If the print er is paus ed (the P AUSE light is on), pr ess the P AUSE key to enable printi ng. Media Removal 1. Cut the media between the media a lignment ...

  • Zebra Technologies Z6M - page 40

    32 Zeb ra Z 4M/ Z 6M Printers User’s Guide ) DQIRO G0HGLD /RDGLQJ Fanfold media fe eds th rough eit her the bot tom or r ear acce ss slo t. Refer t o Figure 20. 1. Pr ess the p rinthead open le ver . The pr inthead as sembly s prings up. 2. Fl ip down the media su pply guide. 3. Sl ide out t he media guide as f ar from th e prin ter fra me ...

  • Zebra Technologies Z6M - page 41

    Zebra Z 4M/ Z 6M Printers User’s Guide 33 Figur e 20 Printhead Assembly Media Supply Guide Media Supply Hanger Printhead Open L ever T ransmissive Sensor Media Guide Dancer Ribbon Sensor Printhead Open L ever Printhead Assembly T ransmissive Sensor Media Supply Guide Media Guide Dancer Ribbon Sensor Media Supply Hanger Bottom Feed Rear Feed ...

  • Zebra Technologies Z6M - page 42

    34 Zeb ra Z 4M/ Z 6M Printers User’s Guide 5LEERQ/RDGLQJ NOTE: The rib bon suppl y spindle in your pr inter i s a “dua l tensio n” variet y . Most appl ic ati ons r equi re t he s pi ndle t o b e i n t he “normal” po siti on. The “l ow tension ” posi tion i s rec ommended onl y when a wide ri bbo n is us ed and n ormal tension hamp ...

  • Zebra Technologies Z6M - page 43

    Zebra Z 4M/ Z 6M Printers User’s Guide 35 Figur e 22 Ribbon Supply Spindle Printhead Open L ever Ribbon Guide Plate Printhead Assembly Ribbon Sensor Ribbon Supply Spindle Ribbon T ake -up Spindle Printhead Open L ever Ribbon Guide Plate Printhead Assembly Ribbon Sensor (Ribbon Loaded) Release Knob T ension Blades Ribbon T ake -up Spindle Ribbon T ...

  • Zebra Technologies Z6M - page 44

    36 Zeb ra Z 4M/ Z 6M Printers User’s Guide 5LEERQ5HPRYDO T o remove the ri bbon: 1. I f the ribb on has not run out, break it between the ribbon guid e plate and the ribbon take-up spindle. 2. Whi le turni ng the rib bon take-u p spind le relea se knob countercl ockwise , squeeze the ri bbon agains t the r ibbon tak e-up sp indle te nsion blad ...

  • Zebra Technologies Z6M - page 45

    Zebra Z 4M/ Z 6M Printers User’s Guide 37 yØÃAÏ After yo u have inst alled t he media and ribbon and the Power -On Self T est (POST) is comple te, the f ront panel display shows “PRINTER READY .” (I f the pri nter fa ils its POST , refer t o page 75.) Use the front panel di splay and the four keys directly below it ...

  • Zebra Technologies Z6M - page 46

    38 Zeb ra Z 4M/ Z 6M Printers User’s Guide &KDQJLQJ3 DVVZRUG3 URWHFWHG3 DUDPHWHUV Certain parameter s are pas sword prote cted b y factory default. NOTE: Y ou have the option of making al l paramete rs passwor d protect ed. See “P ASSWORD LEVEL” on page 52 for details. CAUTION: Do not change password-pr otected pa rameter s unles ...

  • Zebra Technologies Z6M - page 47

    Zebra Z 4M/ Z 6M Printers User’s Guide 39 /HDYLQJWKH6HWXS0RGH  Y ou can leave the progr am mode at any time by p ressing t he SETUP/EXIT ke y . The “SA VE CHANGES” displ ay appears . There are five choi ces, which are des cribed below . Pressing the INCREMENT (+) o r DECREMENT (–) ke y display s other choices and pre ssing the S ...

  • Zebra Technologies Z6M - page 48

    40 Zeb ra Z 4M/ Z 6M Printers User’s Guide &RQILJXUDWLRQDQG&DO LEUDWLRQ6H TXHQFH Display Sh ows Action/Explanation PRINTER READ Y Normal printer operation. Setting Print Parameters DARKNESS Adjusting P rint Darkness: Press the INCREMENT (+) key t o increase darknes s. Press the D ECREMENT (–) key to dec rease darkness. Defau ...

  • Zebra Technologies Z6M - page 49

    Zebra Z 4M/ Z 6M Printers User’s Guide 41 Display Sh ows Action/Explanation PRINT MODE Selectin g Print Mode: Pres s the INCR EMENT (+) or D ECREMEN T (–) k ey to display other choices. Default: T ear-off Sele ctio ns: T ear-off, cutter , peel-off, liner take-up, rewind Print mode se ttings tell the printer the method of media de livery that yo ...

  • Zebra Technologies Z6M - page 50

    42 Zeb ra Z 4M/ Z 6M Printers User’s Guide Display Sh ows Action/Explanation PRINT M ETHOD Select i ng Pri nt Method : Press the INCREMENT (+) key for the next value; press the DECREMENT (–) key for the previous value. Default: Thermal transfer Sele ctio ns: Thermal transfer , direct thermal The print meth od parameter tells the printer the met ...

  • Zebra Technologies Z6M - page 51

    Zebra Z 4M/ Z 6M Printers User’s Guide 43 Listing P rinter Information Display Sh ows Action/Explanation LIST FONT S List Font s: Press the I NCREMENT (+) key to print a label list ing all of the available fonts. This selection is used to print a label that lists all of the fonts currently av ailable in the printer , including standard printer fo ...

  • Zebra Technologies Z6M - page 52

    44 Zeb ra Z 4M/ Z 6M Printers User’s Guide Display Sh ows Action/Explanation INITIALIZ E CARD Initiali ze Memory Card CAUTION: Perform this operation o nly when it is necessary to erase all previously stored informati on from the optional m emory card. P ress the SETUP/ EXIT key to bypass this funct ion. 1. Press th e INCREMENT (+) key to selec t ...

  • Zebra Technologies Z6M - page 53

    Zebra Z 4M/ Z 6M Printers User’s Guide 45 Media and Ribbon S ensor Ca libration Performing the manual calibration procedure resets the sensitivity of the sensors to detect the media and ribbon you are using more accurately . W ith the sensor s at their new sensitivity , the printer then performs the manual calibration. Changing the type of ribbon ...

  • Zebra Technologies Z6M - page 54

    46 Zeb ra Z 4M/ Z 6M Printers User’s Guide Setting Communication Parameters Communica tion parameters must be set correctly for the printer to c ommunicate with t he host computer . These parameters make sure that the printer and host computer are “speaking the same language.” All communicat ion parameters are password protected. Display Sh o ...

  • Zebra Technologies Z6M - page 55

    Zebra Z 4M/ Z 6M Printers User’s Guide 47 Display Sh ows Action/Explanation PA R I T Y Setting Parity: P ress the INCREMENT (+) or DECREMENT (–) key to display other choices. Default: Even Sele ctio ns: Even, odd, none The parity of the printer must match the p arity of the host computer for accurate communication s to take place. Select the pa ...

  • Zebra Technologies Z6M - page 56

    48 Zeb ra Z 4M/ Z 6M Printers User’s Guide Display Sh ows Action/Explanation NETWORK ID Setting Netwo rk ID: Press the DECREM ENT (–) key to mov e to the next digit position, press the INCREMENT (+) key to increase the value of the digit. Default: 000 Ran ge: 000 - 999 Network ID is used to assign a unique number to a printer used in an RS-422/ ...

  • Zebra Technologies Z6M - page 57

    Zebra Z 4M/ Z 6M Printers User’s Guide 49 Selecting Prefix and Delimiter Characters Prefix and delimiter c haracters are 2-digit hex values used within the ZPL/ZPL II formats sent to the printer . The printer uses the last prefix and delimiter characters sent to it, whether from a ZPL II instruction or from t he front panel. NOT E: DO NOT use the ...

  • Zebra Technologies Z6M - page 58

    50 Zeb ra Z 4M/ Z 6M Printers User’s Guide Selecti ng ZPL Mode Display Sh ows Action/Explanation ZPL MODE Selecti ng ZPL Mode: Press the INCREMENT ( +) or DECREMENT (–) k ey to display other choices. Default: ZPL II Sele ctio ns: ZPL II , ZPL The printer remains in the selected mode until i t is changed by this front p anel instruction or b y u ...

  • Zebra Technologies Z6M - page 59

    Zebra Z 4M/ Z 6M Printers User’s Guide 51 Label P ositi oning Paramet ers Display Sh ows Action/Explanation BACKF EED Backfeed S equence: Press the INCREMENT (+) or DECREMENT (–) key to display other choices. Default: Default (90%) Sele ctio ns: Default, aft er , before, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, off This parameter establishes whe ...

  • Zebra Technologies Z6M - page 60

    52 Zeb ra Z 4M/ Z 6M Printers User’s Guide Display Sh ows Action/Explanation WEB S. MEDI A S. RIBBON S. T A KE LABE L S. MEDI A LE D RIBBON LED These parameters are automatically set during the calibration procedure. They should only be changed by a qualified service technician. Refer to the maintenance m anual for more informat ion on these para ...

  • Zebra Technologies Z6M - page 61

    Zebra Z 4M/ Z 6M Printers User’s Guide 53 * ZebraNet ® PrintServ er II option required Display Sh ows Action/Explanation IP RESOLUTI ON* IP Resol ution: Press the INCREMENT (+) or DECREMENT (–) key to display other choices. Default: Dynam ic Sele ctio ns: Dyna mic, permanent Depending on the selection, allows ei ther the user (”permanent”) ...

  • Zebra Technologies Z6M - page 62

    54 Zeb ra Z 4M/ Z 6M Printers User’s Guide Display Sh ows Action/Explanation LANGUAGE Selecti ng the Display La ng uage: Press the INCREMENT (+) or DECREMENT (–) key to display other choice s. Default: English Sele ctio ns: English, S panish, F rench, German, Italian, Norwegian, Portuguese, Swedish, Danish, S panish 2, Dutch, Finnish, Japanese ...

  • Zebra Technologies Z6M - page 63

    Zebra Z 4M/ Z 6M Printers User’s Guide 55 /ØÏlÍAÃlÍAcÍc ØÆÏlÏÆ &OHDQLQJ T able 2 provid es a recommend ed cle aning s chedul e. Speci fic cle aning p rocedur es ar e provide d on the fol lowing pages. CAUTION: Use onl y the cle aning agen ts ind icated. Ze bra T echnologie s Corporat ion will n ot be res ...

  • Zebra Technologies Z6M - page 64

    56 Zeb ra Z 4M/ Z 6M Printers User’s Guide &OHDQLQJ WKH( [WHULRU The exter ior s urfaces of the pri nter ma y be clean ed with a l int-fre e cloth. Do not use harsh or abrasive cleanin g agents or solvents . If neces sary , a mild dete r gent or desktop cleaner may be used sparingl y . &OHDQLQJ WKH, QWHULRU Rem ov e any accu m ...

  • Zebra Technologies Z6M - page 65

    Zebra Z 4M/ Z 6M Printers User’s Guide 57 &OHDQLQJ WKH6 HQVRUV Brush or vacuum any a ccumula ted pa per lint and dust away from t he print er sensor s. Refer t o Figure 24. The refle ctive se nsor , transmissiv e sensor , and ribbo n sensor should be cleaned o n a regu lar basi s to en sure prope r operat ion of the printer . For printe ...

  • Zebra Technologies Z6M - page 66

    58 Zeb ra Z 4M/ Z 6M Printers User’s Guide ( [ W H Q G W K H / L I H R I < R X U  3 U L Q W K H D G : L W K     6DYH  $ 3U LQWKHDG &OHDQLQJ)LO P &KDOOHQJH The print head is t he most critica l compon ...

  • Zebra Technologies Z6M - page 67

    Zebra Z 4M/ Z 6M Printers User’s Guide 59 Next, press the swab tip agains t the printhea d and swipe the print ele m ent s from end to end. Then, t urn the pl aten rol lers while wi ping them f rom side to si de. Repeat this step unt il the s wab no lo nger shows di rt. $YRLGWKH&RQWULEXWLQJ)DFWRUVWR3UHPDWXUH3 ULQWKHDG)DLO ...

  • Zebra Technologies Z6M - page 68

    60 Zeb ra Z 4M/ Z 6M Printers User’s Guide Save-a-Pr inthead Cle aning Film What is Save-a-P rinthead cleaning f ilm ? A sp ecia lly co ated fi lm th at remo ves contamina tion buil dup without damagi ng the pri nthead. What ar e the bene fits of Save-a-Pr inthead cl eanin g film ? • Extends t he li fe of your printhea d. • Reduces mai ntenan ...

  • Zebra Technologies Z6M - page 69

    Zebra Z 4M/ Z 6M Printers User’s Guide 61 NOTE: If a r eplacement printhea d is neede d, Zebra st rongly rec ommends using a p roduct from th e Original Equipmen t Manufa cturer ( OEM) to ensure that you r prin ter and pa rt warra nties re main int act, and t hat the p roduct perfor ms optimall y . How to Order Sav e-a-Print head Cleaning Film Ki ...

  • Zebra Technologies Z6M - page 70

    62 Zeb ra Z 4M/ Z 6M Printers User’s Guide &OHDQLQJ WKH3R ZHU3HHO 5HZLQG0 RGXOH (Power pe el/rew ind optio n requi red) Perform t he follo wing pro cedure if adhesive buildu p begins t o aff ect peel perfor mance. Refer t o Figure 25. 1. Ope n the pri nthead ass embly . 2. Cl ose t he val ue p eel a ssembly (if open ) to preven ...

  • Zebra Technologies Z6M - page 71

    Zebra Z 4M/ Z 6M Printers User’s Guide 63 &OHDQLQJ WKH9 DOXH3HHORII 0RGXOH (V alue peel-o ff o ption req uired) Perform t he follo wing pro cedure if adhesive buildu p begins t o aff ect peel -of f perfor mance. Refer t o Figure 26. 1. Ope n the pri nthead ass embly . 2. Cl ose t he val ue p eel a ssembly (if open ) to preve ...

  • Zebra Technologies Z6M - page 72

    64 Zeb ra Z 4M/ Z 6M Printers User’s Guide &OHDQLQJ WKH& XWWHU0 RGXOH (Cutter option r equire d) :$51,1*  )RUSHUVRQ QHOVD IHW$/: $<6WXUQR IIDQGX QSOXJ WKHSULQWH UEHIRUHS HUIRUPLQJWK LVSURFHGXUH Refer t o Figure 27. T o clean adhesi ve of f of the upper a nd lower cutter bl ...

  • Zebra Technologies Z6M - page 73

    Zebra Z 4M/ Z 6M Printers User’s Guide 65 /XEULFDWLRQ CAUTION: No lubr icatin g agents of any kind s hould be use d on this printe r! Some c ommercia lly av ailable lubrican ts wil l damage the fini sh and the mec hanic al parts if used . 3 ULQWKHDG3 UHVVXUH$GMXVWPHQW This adj ustmen t may be n ecessary if p rinting is too light on on ...

  • Zebra Technologies Z6M - page 74

    66 Zeb ra Z 4M/ Z 6M Printers User’s Guide The pres sure adju stment dials ea ch have f our possi ble sett ings desi gnated by blocks of increa sing size embossed on the pri nt mechani sm. The smalle st block ( fully counter clockwi se) i s cons id ered “ posit ion 1” and t he lar gest block ( full y cloc kwise) is conside red “posit ion 4. ...

  • Zebra Technologies Z6M - page 75

    Zebra Z 4M/ Z 6M Printers User’s Guide 67 5HZLQG0HGLD$ OLJQPHQW (Rewin d option r equired) NOTE: The me dia /back ing sho uld be install ed flush against t he bac kplate of the tak e-up sp indle to p revent t he media/ba cking fro m winding too l oosely . Perform t he follo wing adjust ment if t he media does not trac k properl y onto the t ...

  • Zebra Technologies Z6M - page 76

    68 Zeb ra Z 4M/ Z 6M Printers User’s Guide )XVH5HSODFHPHQ W A user -r eplaceabl e AC power fus e is loca ted just below the AC po wer swit ch at the rear of the prin ter . The replacement fuse is a 3AG fast bl ow style r ated at 5 Amp/250 V AC. NOTE: Before r eplacin g the f use, turn o f f the AC power switch an d unplug the A C powe r cord . ...

  • Zebra Technologies Z6M - page 77

    Zebra Z 4M/ Z 6M Printers User’s Guide 69 2 ÃØOlÆÏ /&'(UURU&RQGLWLRQVD QG: DUQLQJV (UURUFRQGLWLRQ³5,%%21287 (UURUFRQGLWLRQ³3$3(5287 Problem Solution In thermal t ransfer mode, the r ibbon is not loaded or loaded incorrectly . Load the r ibbon correctly . See “ Ribbon ...

  • Zebra Technologies Z6M - page 78

    70 Zeb ra Z 4M/ Z 6M Printers User’s Guide (UURUFRQGLWLRQ³+($'23(1 (UURUFRQGLWLRQ³5,%%21,1 :DUQLQJ³+($' 29(5 7(03 :DUQLQJ³+($'81'(5 7(03 Problem Solut ion The printhead is not fully closed. Close the printhead. The ribbon is loaded incorrectly; it is covering the head open se ...

  • Zebra Technologies Z6M - page 79

    Zebra Z 4M/ Z 6M Printers User’s Guide 71 :DUQLQJ³&877(5 -$0 2872) 0(025< 3 ULQW4XDOLW3 UREOHPV *HQHUDOSULQWTXDOLWLVVXHV Problem Soluti on Cutter blade is in the media p ath. Turn of f the printer power and unplug the printer . Inspect the cutter module for debris and clean as needed following the cleani ...

  • Zebra Technologies Z6M - page 80

    72 Zeb ra Z 4M/ Z 6M Printers User’s Guide *UDOLQHVRQEODQNODEHOVZ LWKQRFRQVLVWH QWSDWWHUQ /LJKWFRQVLVWHQWY HUWLFDOOLQHVUXQQLQJWKURXJKDOORIWKHODEHOV ,QWHUPLWWHQWFUHDVHVRQ WKHOHIWDQGULJKWHGJHVRIWK HODEHO :ULQNOHGULEERQ Problem Solution The printhead is dirty . C ...

  • Zebra Technologies Z6M - page 81

    Zebra Z 4M/ Z 6M Printers User’s Guide 73 &DOLEUDWLRQ &RPPXQLFDWLRQ3UREOHPV $ ODEHO IRUPDW ZD V VHQW WR WKH SULQWHU EXW QRW UHFRJQ L]HG  7KH '$7$ O LJKW GRHVQRWIODVK Problem Solution Loss of printing registration on labels. Excessive vertical drift in top-of-form registratio ...

  • Zebra Technologies Z6M - page 82

    74 Zeb ra Z 4M/ Z 6M Printers User’s Guide $ODEHOIRUPDWZDVVHQWWRWKH SULQWHU6HYHUDOODEHOVSULQWWKHQWKH SULQWHUVNLSVPLVSODFHVPLVVHVRU GLVWRUWVWKHLPDJHRQWKHODEHO $ ODEHO IRUPDW ZD V VHQW WR WKH SULQWHU EXW QRW UHFRJQ L]HG  ...

  • Zebra Technologies Z6M - page 83

    Zebra Z 4M/ Z 6M Printers User’s Guide 75 3 ULQWHU'LDJQRVWLFV 3RZHU2Q 6HOI7HVW A Power -On Sel f T est (POST) is per formed aut omatica lly each time the pr inter is turned on. During this te st sequ enc e, th e fr ont pane l li ght s an d li qui d cr ystal dis play (LCD) mon itor th e prog ress of the P O ST . If th e prin ter f ...

  • Zebra Technologies Z6M - page 84

    76 Zeb ra Z 4M/ Z 6M Printers User’s Guide &$1&(/ .H6HOI 7HVW This self te st pr in ts a lis tin g of the c onfigurat ion parame ters cur rently s tored in the p rinter ’ s me mory . See Figure 3 0. (Dependin g on the opti ons order ed, your label may look di ff erent. ) 1. T urn off the print er . 2. Pr ess and hol d the CANC ...

  • Zebra Technologies Z6M - page 85

    Zebra Z 4M/ Z 6M Printers User’s Guide 77 3$86( .H6 HOI7HVW This sel f test c an be used to pr ovide the test l abels re quired when making adju stments to the pr inter’ s mechanical assemb lies. See the sa mple print out in Figure 3 1. 1. T urn off the print er . 2. Pr ess and hol d the P AUSE key while turni ng on the po w er . 3 ...

  • Zebra Technologies Z6M - page 86

    78 Zeb ra Z 4M/ Z 6M Printers User’s Guide )((' .H6 HOI7HVW See Figur e 32. 1. T urn off the print er . 2. Pr ess and hol d the FEED key while tu rning on t he power . 3. Re lease the FEED key af ter the DA T A light tu rns of f (approxi mately fi ve seconds ). The FEED Key Sel f T est prints out at vari ous darkne ss setti ngs ...

  • Zebra Technologies Z6M - page 87

    Zebra Z 4M/ Z 6M Printers User’s Guide 79 &RPPX QLFDW LRQV'LD JQRVWLFV 7HVW This tes t is cont roll ed from the front pan el displ ay . Refer to page 48. A typi cal print out fr om th is test is sho wn in F igure 33. Turn off the p owe r to ex it this self te st. NOTE: This la bel is inverted when print ed. /RDGLQJ)DFWRU&apo ...

  • Zebra Technologies Z6M - page 88

    80 Zeb ra Z 4M/ Z 6M Printers User’s Guide ...

  • Zebra Technologies Z6M - page 89

    Zebra Z 4M/ Z 6M Printers User’s Guide 81 0®lYyYA ÏÆ NOTE: Printe r spec ificat ions are s ubject to change without no tice. *HQHUDO6SHFL ILFDWLRQV G e n e r a l Specifications Z 4M Z 6M Height 13.3" 338 mm 13.3" 338 mm Width 10.9" 277 mm 13.4" 341 mm Depth 18.7" 475 mm 18.7" 475 mm Weight (wit h ...

  • Zebra Technologies Z6M - page 90

    82 Zeb ra Z 4M/ Z 6M Printers User’s Guide 3 ULQWLQJ6SHFLILFDWLRQ V 5LEERQ6SHFLILFD WLRQV Printing S pecifications Z 4M Z 6M Print resol ution 203 dot s/inch 8 dots/mm 203 dots/i nch 8 dots /mm 300 dot s/inch 12 dot s/ mm 300 dot s/i nch 12 dots/mm Dot size (width x length) 203 dots / inch 0.00492" x 0.00492" 0. 125 mm x 0.12 5 mm ...

  • Zebra Technologies Z6M - page 91

    Zebra Z 4M/ Z 6M Printers User’s Guide 83 0HGLD6SHFL ILFDWLRQV 2SWLRQV Media Spec ifications Z 4M Z 6M Label l ength Minimum T ear-off 0.5" 13 mm 0.5" 13 mm Peel-of f 1" 25.4 mm 1" 25.4 mm Rewind 0.5" 13 mm 0.5" 13 mm Cutter 1" 25.4 mm 1.5" 38. 1 mm Maximum 39" 991 mm 39" 991 mm Label wi dth (m ...

  • Zebra Technologies Z6M - page 92

    84 Zeb ra Z 4M/ Z 6M Printers User’s Guide =HEUD3URJUDPPLQJ/DQJXDJH=3/, , %DUFRGHV Z 4M/ Z 6M ZPL II Features • Downloadable graph ics (with data compressi on) • Programma ble quantity with print pause • Bit image data transfer and printing, mixed text/graphics • Communicates in printable ASCII characters • Format i ...

  • Zebra Technologies Z6M - page 93

    Zebra Z 4M/ Z 6M Printers User’s Guide 85 $ &3 RZHU&RUG Since many areas of t he world ha ve specif ic power r equirements, a n AC power cord may not be include d with your printer . The power cord must meet your local e lectri cal requir ements. :$51,1*  )RUS HUVRQQHOD QGHTX LSPHQWVDI HWDOZD VXVHD ...

  • Zebra Technologies Z6M - page 94

    86 Zeb ra Z 4M/ Z 6M Printers User’s Guide ...

  • Zebra Technologies Z6M - page 95

    Zebra Z 4M/ Z 6M Printers User’s Guide 87 ®®l cà 3 ULQWHU,QWHUIDFH7 HFKQLFDO,QIRUPDWLRQ 6HUL DO'D WD&RPPX QL FDWLRQ V T able 6 illus trates the pin co nnecti ons on the DB-25 conne ctor at the re ar of the print er . Ta b l e 6 Pin No . Des cription 1 Chassis ground 2 TXD (transmit data) output from the printer ...

  • Zebra Technologies Z6M - page 96

    88 Zeb ra Z 4M/ Z 6M Printers User’s Guide 56 ,Q WHUI DFH This printe r is c o nfigu red a s Data T e rmin al Eq ui pme nt (DT E). T h e seri al d at a cabl e used to c onnect the prin ter to th e host comput er is one of two s tyles: • 9-pin to 25-pin cabl e – (null mo dem cable) must have a 9- pin “D” ty pe (DB-9S) connec ...

  • Zebra Technologies Z6M - page 97

    Zebra Z 4M/ Z 6M Printers User’s Guide 89 +DUGZDUH&RQWURO6LJQDO'HVFULSWLRQV For all RS-232 input and output signals , the Z 4M and Z 6M printe rs foll ow bo th the Electr onics Indu stries As sociati on (EIA) RS-2 32 and t he Consulta tive Commi ttee for Intern ational T elegraph and T elephone (CCITT) V .24 stand ard signal lev ...

  • Zebra Technologies Z6M - page 98

    90 Zeb ra Z 4M/ Z 6M Printers User’s Guide 56 ,Q WHUI DFH Figure 3 8 illu strates the pin c onnections on the DB-25 connect or at the rear of the printe r that ar e used for the RS- 485 communicat ion proto col. NOTE: XON/XOFF handsha king must be used for RS- 485 communica tions. Figur e 38 DB-25P Connector to Printer Data Input A ...

  • Zebra Technologies Z6M - page 99

    Zebra Z 4M/ Z 6M Printers User’s Guide 91 3DUDO OHO' DWD& RPPXQLF DWLRQV T able 7 illus trates the pi n connecti ons on the bi-di rectiona l parall el con nector at the rear of the prin ter . 3DUDOOHO,QWHUIDFH The 8-bit para llel dat a interf ace suppor ts IEE E 1284 bi-di rection al par allel communic ations i n “nibb le mode ...

  • Zebra Technologies Z6M - page 100

    92 Zeb ra Z 4M/ Z 6M Printers User’s Guide ...

  • Zebra Technologies Z6M - page 101

    Zebra Z 4M/ Z 6M Printers User’s Guide 93 A AC Power Cord Specifications , 85 Adjustments Printhead Pressure, 65 Reflect ive Sen sor, 10 Auto Cali bra tion, 12 B Bar Codes, 84 C Cabling Re quirements, 18 Calibratin g the Print er, 5 CANCEL Key Self Test, 76 Cleaning Cutter Mod ule, 64 Exteri or, 56 Interior, 56 Power Pee l/Rewind Module, 6 2 Prin ...

  • Zebra Technologies Z6M - page 102

    94 Zeb ra Z 4M/ Z 6M Printers User’s Guide L LCD Erro r Conditions a nd Wa rnings, 69 Liner R emoval, 27 , 29 Liner Take-u p Mode, 2 6 Lubric atio n, 65 M Media L oading Cutte r Mode, 23 Fanf ol d, 32 Liner Take-u p Mode, 2 6 Power Peel/Rewind (Peel M od e), 28 Power Peel/Rewind (Rewind Mo de), 30 Tear-off Mode, 22 Value Peel-off Mode, 24 Media R ...

  • Zebra Technologies Z6M - page 103

    Zebra Z 4M/ Z 6M Printers User’s Guide 95 Specificatio ns AC Power Cord, 85 Bar Codes, 84 Gener a l, 81 Media, 83 Optio ns, 83 Prin ting, 82 Zebra Programming Language (ZPL II), 84 Stor age, 2 System Consi de rations Data Spe cifications , 17 Interfaces, 17 T Tear-off Mode, 22 Test La bel Print ing, 15 Tran smissi ve Sen sor P osition ing, 10 Typ ...

  • Zebra Technologies Z6M - page 104

    96 Zeb ra Z 4M/ Z 6M Printers User’s Guide ...

  • Zebra Technologies Z6M - page 105

    Warran ty In fo rmat ion 1 =HEUD7 HFKQR ORJLHV&RUSRUDWLRQ W arran ty Informa tion (IIHFW LYH1RY HPEHU   $OO=HEUDSURGXFWVDUHVROG ZLWKZDUUDQWLHV5HIHUWRWKH8VHU·V*XLGHIRU ZDUUDQWLQIRUPDWLRQVSHFLILFWRHDFKSURGXFW+HUHLVVRPHJHQ HUDO LQIRU ...

  • Zebra Technologies Z6M - page 106

    2 War ran ty Informa tion 7R TXDO LI IRU WKLVZ DUUDQW  WKH SUL QWKHDG PXVW EH UHWXU QHG WR WKH IDFWRU RU WR DQDXWKRUL]HGVHUYLFHFHQWHU&XVWRPHUV DUHQRWUHTXLUHGWRSXUFKDVH=HEUD VXSSOLHVPH GLDDQGRUULEERQVIRUZDUUD QWTXDOLILFDWLRQ? ...

  • Zebra Technologies Z6M - page 107

    Warran ty In fo rmat ion 3 :DUUDQW([F OXVLRQV &RQGL WLRQV6WDWHPHQW 7KHZDUUDQWLHV SURYLGHGDERYHDUHWKH RQOZDUUDQWLHVDSSOLFDEOH1RRWKHU ZDUU DQWLH V H[SUHVVHG  RU LPS OL HG DUH JLY HQ =HEUD GRHV QRW PDNH DQ ,03/ ,('  :$55$17<2)0(5&+ ...

  • Zebra Technologies Z6M - page 108

    4 War ran ty Informa tion ...

  • Zebra Technologies Z6M - page 109

    Printe r Soft ware and Fir mware Lic ense Agreem ent 1 ZebraLink License Agr eement Printer Software and Firmware License Agreement YOU SHOULD CAREFUL L Y READ THE FOLLOW ING TERMS AND CON D ITIONS OF THIS ZEBRA TECHNOLOGIES CORPO RA TION PR INT ER SOFTW ARE AND FIRMW ARE LICENSE AGREEMENT ("PSFLA") BEFORE USING THE PRINTER WH ICH IS ENCL ...

  • Zebra Technologies Z6M - page 110

    2 Printer Sof tware and F irmware Lic ense Agreemen t • Rental. Y ou may not rent or lease or le nd the SOFTW AR E or FIRMW ARE. • Support S ervices. ZEBRA may provide you with support services re lated to the SOFTW ARE and /o r FI RM W AR E ("SU PPOR T SER V IC ES"), in its disc retion. Use of SUPP O R T SER VICES, i f an y , is gove ...

  • Zebra Technologies Z6M - page 111

    Printe r Soft ware and Fir mware Lic ense Agreem ent 3 7. E X PO R T RESTRICTIO N S . Y ou agree t ha t you wi l l no t expo rt or re-e xpor t t h e SOFTW ARE and/or FIR MW A RE, any part the r eof , or any proc ess or se rv ice tha t is th e di r ect prod uc t of the SOFT W ARE and/ or FI RMW ARE (th e fore go in g co ll ect iv ely r ef er re d to ...

  • Zebra Technologies Z6M - page 112

    4 Printer Sof tware and F irmware Lic ense Agreemen t • If the emulation li brary is sold se parately b y an authoriz ed party ot her than ZEBRA ("RESEL LER" -- A pa rt y o ther than ZE BRA w hi c h is au thorized by ZEB RA to distr ibute the SOFT W ARE and/or FI RMW ARE with its a pplicatio n so long as the SO FTW ARE and/or FIRMW ARE ...

Manufacturer Zebra Technologies Category Printer

Documents that we receive from a manufacturer of a Zebra Technologies Z6M can be divided into several groups. They are, among others:
- Zebra Technologies technical drawings
- Z6M manuals
- Zebra Technologies product data sheets
- information booklets
- or energy labels Zebra Technologies Z6M
All of them are important, but the most important information from the point of view of use of the device are in the user manual Zebra Technologies Z6M.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Zebra Technologies Z6M, service manual, brief instructions and user manuals Zebra Technologies Z6M. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Zebra Technologies Z6M.

Similar manuals

A complete manual for the device Zebra Technologies Z6M, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Zebra Technologies Z6M by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Zebra Technologies Z6M.

A complete Zebra Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Zebra Technologies Z6M - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Zebra Technologies Z6M, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Zebra Technologies Z6M, that we can find in the current document
3. Tips how to use the basic functions of the device Zebra Technologies Z6M - which should help us in our first steps of using Zebra Technologies Z6M
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Zebra Technologies Z6M
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Zebra Technologies Z6M in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Zebra Technologies Z6M?

Use the form below

If you did not solve your problem by using a manual Zebra Technologies Z6M, ask a question using the form below. If a user had a similar problem with Zebra Technologies Z6M it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)