English dropdown-ico

Manual Star Micronics SPC-8K

27 pages 0.11 mb
Download

Go to site of 27

Summary
  • Star Micronics SPC-8K - page 1

    RS 232C SERIAL TO PARALLEL CONVERTER RS 232C SERIELL-PARALLEL-KONVERTER RS 232C CONVERTISSEUR SÉRIE PARALLÈLE RS 232C CONVERTITORE SERIALE- PARALLELO SPC-8K USERS MANUAL BEDIENUNGSHANDBUCH GUIDE D’UTILISATION MANUALE OPERATIVO 80821621 ...

  • Star Micronics SPC-8K - page 2

    Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, u ...

  • Star Micronics SPC-8K - page 3

    1 English INTRODUCTION The Serial to Parallel Converter is an EIA compatible serial device that can interface, STAR Printers with nearly every Micro-Processor which requires standard EIA (serial) interfacing. Please read this manual completely before proceeding to “power-up”! This will ensure successful operation of your Serial to Parallel Conv ...

  • Star Micronics SPC-8K - page 4

    2 Connecting the serial-to-parallel converter • Unplug the printer from its AC power outlet. • Plug the interface converter’s Centronics connector into the socket on the side of the printer and secure it in place with the clips. • Plug one end of a serial cable into the serial connector. • Plug the other end of the serial cable into your ...

  • Star Micronics SPC-8K - page 5

    3 The tables below show all of the settings you can make with the serial-to- parallel’s DIP switches to control certain parameters. The tables also include the matching settings you have to make in your MS-DOS AUTOEXEC.BAT file or with the Ports option of the Windows Control Panel. The highlighted cells in the tables indicate default settings for ...

  • Star Micronics SPC-8K - page 6

    4 Some programmers call the XON and XOFF control codes “kiss on and kiss off”; others call the same protocol DC1 and DC3 (for device control). Either way, these codes are used to let your printer control the flow of data, telling the computer when to start and stop sending data. Your printer asks to have data held back when its memory is nearly ...

  • Star Micronics SPC-8K - page 7

    5 • Double-click on the Control Panel icon. • Double-click on the Printers icon in the Control Panel window. • Highlight the STAR printer on LPT1 in the Installed Printers window, and then click on Connect . • Click on the serial port (COMn) to which the serial-to-parallel converter is connected. • Click OK to return to the Printers windo ...

  • Star Micronics SPC-8K - page 8

    6 TECHNICAL SPECIFICATIONS (INPUT SIDE) General Specifications Item Specifications Interface RS-232C-level Synchronization System Asynchronous Baud rate 150, 300, 600, 1200, 2400, 4800, 9600, 19200 BPS (selectable) Word length Start bit: 1 bit Data bits: 7 or 8 bits (selectable) Parity bit: Odd, Even or None (selectable) Stop bits: More than 1 bit ...

  • Star Micronics SPC-8K - page 9

    7 Deutsch EINFÜHRUNG Der Seriell-Parallel-Konverter ist eine EIA-kompatible serielle Schnittstelle, die STAR-Drucker mit nahezu jedem Mikroprozessor verbinden kann, der eine standardisierte (serielle) EIA-Schnittstellenverbindung benötigt. Bitte lesen Sie dieses Handbuch vollständig durch, bevor Sie die Initialisierung durchführen. Dies gewähr ...

  • Star Micronics SPC-8K - page 10

    8 • Ein Ende des seriellen Kabels in den seriellen Anschluß des Konverters einstecken. • Das andere Ende des seriellen Kabels in den seriellen Ausgang/An- schluß Ihres Computers einstecken. Serielle Ausgänge sind üblicher- weise durch COM1, COM2 etc. gekennzeichnet. Wenn Ihr Computer nur einen seriellen Ausgang hat, so ist dieser mit COM1 g ...

  • Star Micronics SPC-8K - page 11

    9 Parameter vornehmen können. Die Tabellen enthalten auch die erforderli- chen Einstellungen, die Sie in Ihrer MS-DOS AUTOEXEC.BAT-Datei oder bei den Anschlußoptionen der Windows-Systemsteuerung vornehmen müs- sen. Die markierten Kästchen in der Tabelle geben die Standardein- stellungen des Seriellen Interface-Konverters an. Datenlänge Die Dat ...

  • Star Micronics SPC-8K - page 12

    10 Einige der Programme nennen die Steuerbefehle XON und XOFF “kiss on und kiss off” (mit Kuß einleiten und mit Kuß abschließen”); andere nennen das gleiche Protokoll DC1 und DC3 (zur Gerätesteuerung). Wie auch immer, diese Steuerbefehle ermöglichen Ihrem Drucker, den Datenfluß zu steuern, dem Computer mitzuteilen, wann er mit dem Sende ...

  • Star Micronics SPC-8K - page 13

    11 • Öffnen Sie im Windows Programm-Manager die Hauptgruppe durch Klicken auf das dazugehörige Symbol. • Doppelklick auf das Symbol Systemsteuerung. • Doppelklick auf das Symbol Drucker im Fenster Systemsteuerungen . • Den STAR-Drucker unter LPT1 im Fenster Installierte Drucker markie- ren und auf Anschließen klicken. • Klick auf den s ...

  • Star Micronics SPC-8K - page 14

    12 Gehäuseerdung Datenleitung vom Drucker Datenleitung zum Drucker Immer Abstand Der Drucker prüft diesen Pin nicht. Unbenutzt Signalerdung Unbenutzt Diese Zeile überträgt das gleiche Si- gnal wie Pin 20. Unbenutzt. Der Drucker stellt diesen Pin auf Ab- stand, wenn er zum Empfang von Daten bereit ist. Unbenutzt. TECHNISCHE DATEN (EINGABESEITE) ...

  • Star Micronics SPC-8K - page 15

    13 Français INTRODUCTION Le convertisseur série/parallèle est une unité série compatible EIA permettant d’interfacer les imprimantes STAR avec pratiquement tout microprocesseur nécessitant une interface EIA (série) standard. Veuillez lire ce manuel de bout en bout avant de procéder à la «mise sous tension» afin de garantir le bon fonct ...

  • Star Micronics SPC-8K - page 16

    14 Connexion du convertisseur série/parallèle • Débranchez l’imprimante de la prise secteur. • Branchez le connecteur Centronics du convertisseur d’interface sur la fiche située sur le côté de l’imprimante et fixez-la en position au moyen des pinces prévues à cet effet. • Branchez une extrémité du câble série au connecteur s ...

  • Star Micronics SPC-8K - page 17

    15 Les tableaux ci-dessous illustrent tous les réglages que vous pouvez effectuer au moyen des interrupteurs DIP du convertisseur série/parallèle pour contrôler certains paramètres. Ces tableaux indiquent également les valeurs correspon- dantes que vous devez sélectionner dans votre fichier AUTOEXEC.BAT sous MS-DOS ou au moyen de l’option ...

  • Star Micronics SPC-8K - page 18

    16 «handshaking» ou «prise de contact») signifie en fait «qui dit quoi et quand». Il permet à l’imprimante d’indiquer à l’ordinateur qu’elle est prête à recevoir des données. L’ordinateur et l’imprimante communiquent entre eux en en- voyant des codes de protocole (qui sont situés au début de la table ASCII). Certains progra ...

  • Star Micronics SPC-8K - page 19

    17 Configuration d’une connexion série sur ordinateur exécutant Windows N’oubliez pas que les valeurs configurées sur l’ordinateur doivent correspon- dre à celles définies au moyen des interrupteurs DIP du convertisseur. • Dans le Panneau de configuration de Windows, sélectionnez le Groupe principal en cliquant sur l’icône associé ...

  • Star Micronics SPC-8K - page 20

    18 Terre de châssis d’imprimante. Cette broche achemine les données depuis l’imprimante. Cette broche achemine les données vers l’imprimante. Toujours forcée à 0. L’imprimante ne vérifie pas cette broche. Inutilisée. Terre signal. Inutilisée. Cette ligne achemine le même signal que la broche 20. Inutilisée. L’imprimante force ce ...

  • Star Micronics SPC-8K - page 21

    19 Italiano INTRODUZIONE Questo convertitore seriale-parallelo è un dispositivo seriale compatibile EIA (Electronic Industries Association) in grado di interfacciare le stampanti STAR con quasi tutti i microprocessori che richiedono un interfacciamento EIA (seriale) standard. Per garantire il buon funzionamento del convertitore d’interfaccia, vi ...

  • Star Micronics SPC-8K - page 22

    20 Collegamento del convertitore d’interfaccia seriale-parallelo • Scollegate la stampante dalla presa elettrica. • Collegate il connettore Centronics del convertitore d’interfaccia alla presa posta sul lato della stampante e bloccatelo con gli appositi fermagli. • Collegate un’estremità del cavo seriale al connettore seriale. • Coll ...

  • Star Micronics SPC-8K - page 23

    21 Le tabelle sotto illustrano tutte le combinazioni di interruttori DIP che è possibile eseguire per configurare determinati parametri. In tali tabelle sono indicati anche i corrispondenti valori che dovrà contenere il file MS-DOS AUTOEXEC.BAT o che bisognerà specificare nell’opzione Porte del Pannel- lo di Controllo di Windows. Le caselle de ...

  • Star Micronics SPC-8K - page 24

    22 con cui la stampante comunica al computer che è pronta a ricevere dati. Il computer e la stampante comunicano tra loro inviandosi caratteri di controllo relativi al protocollo (situati all’inizio della tabella ASCII). Alcuni programmatori chiamano i codici di controllo XON e XOFF “kiss on e kiss off”; altri chiamano lo stesso protocollo D ...

  • Star Micronics SPC-8K - page 25

    23 Configurazione di una porta seriale in ambiente Windows Ricordate che le impostazioni che eseguirete sul computer dovranno corri- spondere a quelle degli interruttori DIP. • Dal Program Manager di Windows, aprite il gruppo Principale facendo clic sulla sua icona. • Fate doppio clic sull’icona del Pannello di Controllo. • Fate doppio clic ...

  • Star Micronics SPC-8K - page 26

    24 Massa del telaio della stampante. Su questo pin la stampante trasmette dati. Su questo pin la stampante riceve dati. Livello del segnale sempre su Space. La stampante non effettua nessun con- trollo su questo pin. Non utilizzato. Massa del segnale. Non utilizzati. Trasporta lo stesso segnale del pin 20. Non utilizzati. La stampante imposta quest ...

  • Star Micronics SPC-8K - page 27

    Customer response Worldwide Headquarters STAR MICRONICS CO., LTD. 536 Nanatsushinya, Shimizu, Shizuoka, 424, Japan North and South America Markets STAR MICRONICS AMERICA, INC. 70- D Ethel Road West Piscataway, NJ 08854 European Market STAR MICRONICS DEUTSCHLAND GMBH Westerbachstraße 59 D-60489 Frankfurt F.R. of Germany U.K. Market STAR MICRONICS U ...

Manufacturer Star Micronics Category TV Converter Box

Documents that we receive from a manufacturer of a Star Micronics SPC-8K can be divided into several groups. They are, among others:
- Star Micronics technical drawings
- SPC-8K manuals
- Star Micronics product data sheets
- information booklets
- or energy labels Star Micronics SPC-8K
All of them are important, but the most important information from the point of view of use of the device are in the user manual Star Micronics SPC-8K.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Star Micronics SPC-8K, service manual, brief instructions and user manuals Star Micronics SPC-8K. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Star Micronics SPC-8K.

Similar manuals

A complete manual for the device Star Micronics SPC-8K, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Star Micronics SPC-8K by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Star Micronics SPC-8K.

A complete Star Micronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Star Micronics SPC-8K - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Star Micronics SPC-8K, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Star Micronics SPC-8K, that we can find in the current document
3. Tips how to use the basic functions of the device Star Micronics SPC-8K - which should help us in our first steps of using Star Micronics SPC-8K
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Star Micronics SPC-8K
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Star Micronics SPC-8K in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Star Micronics SPC-8K?

Use the form below

If you did not solve your problem by using a manual Star Micronics SPC-8K, ask a question using the form below. If a user had a similar problem with Star Micronics SPC-8K it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)