-
National Instruments SCXI-1503 - page 1
SCXI TM SCXI-1503 User Manual Mar ch 2007 374271A-01 ...
-
National Instruments SCXI-1503 - page 2
Support Worldwide Technical Support and Product Info rmation ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Aust in, Texas 78759-3504 USA Tel: 512 683 0100 Worldwide Offices Australia 1800 300 800, Austria 43 662 457990-0, Belgium 32 (0) 2 757 0020, Brazil 55 11 3262 3599, Canada 800 433 3488, China 86 21 5050 9800, ...
-
National Instruments SCXI-1503 - page 3
Important Information Warranty The SCXI-1503 is warranted against defects in materials and wo rkma nship for a p eriod of one year from the date of shipment, as evidenced by receipts or other documentati on. National Instruments will, at its option, repair or replace equipment that proves to be defective during the warranty period. This warrant y i ...
-
National Instruments SCXI-1503 - page 4
Conventions The follo wing con ve ntions are used in this manual: < > Angle brackets that cont ain numbers s eparated by an ellipsis represent a range of v alues associated with a bit or signal name—for example, P0.<3..0>. » The » symbol leads you through nested menu items and dial og box options to a final action. The sequence File ...
-
National Instruments SCXI-1503 - page 5
© National Instruments Cor poration v SCXI-1503 User Manual Contents Chapter 1 About the SCXI-1503 What You Need to Get Started .............. .............. ........... .............. ............ .............. ....... 1-1 National Instruments D ocumentatio n ............... ........... ............ .............. ........... ........... .. 1-2 ...
-
National Instruments SCXI-1503 - page 6
Contents SCXI-1503 User Manual vi ni.com Chapter 4 Theory of Operation Rear Signal Connector, SCX Ibus Connector, an d SCXIbus Interface .................... ...... 4-3 Digital Control Circuitry .......... ........ ............ ........... .............. ........... ............... ........... ... 4-3 Analog Circuitry ................. ............ ...
-
National Instruments SCXI-1503 - page 7
Contents © National Instruments Corpor ation vii SCXI-1503 User Manual Appendix A Specifications Appendix B Removing the SCXI-1503 Appendix C Common Questions Glossary Index Figures Figure 2-1. 4-Wire Resistive Sensor Connected in a 4-Wire Confi guration ........... 2-3 Figure 2-2. 2-Wire Resistive Sensor Connected in a 2-Wire Confi guration ..... ...
-
National Instruments SCXI-1503 - page 8
Contents SCXI-1503 User Manual viii ni.com Tables Table 1-1. Supported SCXI-1503 Terminal Bloc ks ................ ......................... ...... 1-4 Table 2-1. Front Signal Pin Assignments ..... .............. ............ ........... .............. ...... 2-8 Table 2-2. Signal Descriptions ................... .............. ............ ....... ...
-
National Instruments SCXI-1503 - page 9
© National Instruments Corpor ation 1-1 SCXI-1503 User Manual 1 About the SCXI-1503 This manual describes the electrical and mechanical aspects of the SCXI-1503 module and contain s inform ation concerning its in stallation and operation. The SCXI-1503 module prov ides 16 differential input channels and 16 channels of 100 μ A current excitation a ...
-
National Instruments SCXI-1503 - page 10
Chapter 1 About the SCXI-1503 SCXI-1503 User Manual 1-2 ni.com – One of the following: • SCXI-1600 • E/M Series D A Q de vice – Computer – Cabling, cable adapter , and sensors as required for your application ❑ Software – NI-D A Q 8.1 or later – Application software, such as LabVIEW , LabW indo ws ™ /CVI ™ , Measurement Studio, ...
-
National Instruments SCXI-1503 - page 11
Chapter 1 About the SCXI-1503 © National Instruments Corpor ation 1-3 SCXI-1503 User Manual • SCXI or PXI/SCXI chassis manual—Read this manual for maintenance informatio n on the chassis and for installation instructions. • The DAQ Getting Started Guide —This document has inform ation on installing NI-DA Q and the E/M Series D A Q device. ...
-
National Instruments SCXI-1503 - page 12
Chapter 1 About the SCXI-1503 SCXI-1503 User Manual 1-4 ni.com Installing Application Software, NI-DAQ, and the E/M Series DAQ Device Refer to the DAQ Getting Started Guide packaged with the NI-DAQ software to install your application so ftware, NI-DAQ driver soft ware, and the DAQ device to w hich you will connect t he SCXI-1503. NI-DAQ 8.1 or lat ...
-
National Instruments SCXI-1503 - page 13
Chapter 1 About the SCXI-1503 © National Instruments Corpor ation 1-5 SCXI-1503 User Manual V erifying the SCXI-1503 Installation Refer to the SCXI Quick Start G uide , for details about testi ng the SCXI chassis and module installation in softw are. Refer to Chapter 3, Configuring and Testi ng , for details about setting up a task an d verifying ...
-
National Instruments SCXI-1503 - page 14
© National Instruments Corpor ation 2-1 SCXI-1503 User Manual 2 Connecting Signals This chapter describes the input and output signal connect ions to the SCXI-1503 module with the m odule front connector and rear signal connector. This chapter also include s connection in structions for the signals on the SCX I-1503 module when using the SCXI-1306 ...
-
National Instruments SCXI-1503 - page 15
Chapter 2 Connecti ng Signals SCXI-1503 User Manual 2-2 ni.com Note Exceeding the differential or common-mode input channe l ranges res ults in a distorted signal measurement, and can also in crease the settling time requirement of the connected E/M Series D A Q device. Ground-Referencing the Signals Do not ground signals that are alread y ground-r ...
-
National Instruments SCXI-1503 - page 16
Chapter 2 Connecting Signals © National Instruments Corpor ation 2-3 SCXI-1503 User Manual 4-Wire Configuration The 4-wire configuration, also referred to as a Kelvin connection, is shown in Figure 2-1. The 4-wire configuration us es one pair of wires to deliver th e excitation current to the resistive sensor and us es a separate pair of wires to ...
-
National Instruments SCXI-1503 - page 17
Chapter 2 Connecti ng Signals SCXI-1503 User Manual 2-4 ni.com 2-Wire Configuration The basic 2-wire configuration is shown in Figure 2-2. In th is configuration an error voltage ( V E ) is introduced into the measurement equal to the excitation current ( I EX ) times the su m of the two lead resistances, R L1 and R L2 . If we assume equal lead res ...
-
National Instruments SCXI-1503 - page 18
Chapter 2 Connecting Signals © National Instruments Corpor ation 2-5 SCXI-1503 User Manual 3-Wire Resistive Sensor Configuration If you are using a 3-wire resi stive se nsor, you can reduce the error voltage by one-half over the 2-wire measur ement by connecting the device as shown in Figure 2 -3. In this configuration , very little curr ent flows ...
-
National Instruments SCXI-1503 - page 19
Chapter 2 Connecti ng Signals SCXI-1503 User Manual 2-6 ni.com Lead-Resistance Compensation Using a 3-Wire Resistive Sensor and T wo Matched Current Sources You can compensate for the errors introduced by lead-resistance voltage drops by using a 3-wire resistive sens or and two matched current sources connected as shown in Figure 2-4. Figure 2-4. 3 ...
-
National Instruments SCXI-1503 - page 20
Chapter 2 Connecting Signals © National Instruments Corpor ation 2-7 SCXI-1503 User Manual In this configuration, the lead -resistance voltage drop a cross R L3 is con verted into a common-mode voltage th at is rejected b y the diff erential amplifier . Also, the po larity of th e lead-resistance voltage drops across R L1 and R L2 are series oppos ...
-
National Instruments SCXI-1503 - page 21
Chapter 2 Connecti ng Signals SCXI-1503 User Manual 2-8 ni.com Table 2-1. Front Signal Pin Assignments Front Connect or Diagram Pin Number Column A Column B Column C 32 GND AI0– AI0+ 31 GND AI1– AI1+ 30 GND AI2– AI2+ 29 GND AI3– AI3+ 28 RSVD AI4– AI4+ 27 RSVD AI5– AI5+ 26 RSVD AI6– AI6+ 25 RSVD AI7– AI7+ 24 NC IEX0– IEX0+ 23 NC IE ...
-
National Instruments SCXI-1503 - page 22
Chapter 2 Connecting Signals © National Instruments Corpor ation 2-9 SCXI-1503 User Manual Table 2-2. Signal Descriptions Pin Signal Na me Description A1 +5 V +5 VDC Source—Used to po wer circuitry on the terminal block. 0.1 mA of source not protected. A13 – A16, A29 – A32 GND Ground—T ied to the SCXI module ground. A1, A19, A20, A25 – A ...
-
National Instruments SCXI-1503 - page 23
Chapter 2 Connecti ng Signals SCXI-1503 User Manual 2-10 ni.com Rear Signal Connector Table 2-3 shows the SCXI-1503 module rear signal con nector pin assignments. Table 2-3. Rear Signal Pin Assignments Rear Connector Diagram Signal Name Pin Number Pin Numb er Signal Name AI GND 1 2 AI GND AI 0 + 3 4 AI 0 – NC 5 6 NC NC 7 8 NC NC 9 10 NC NC 11 12 ...
-
National Instruments SCXI-1503 - page 24
Chapter 2 Connecting Signals © National Instruments Corpor ation 2-11 SCXI-1503 User Manual Rear Signal Connector Descriptions The rear signal connector on the cabled module is the interface betw een the DAQ device and all modules in the SCXI chassis. AI 0 is used to differentially multipl ex all 16 channe ls, the CJ sensor, and analog signals fro ...
-
National Instruments SCXI-1503 - page 25
Chapter 2 Connecti ng Signals SCXI-1503 User Manual 2-12 ni.com 26 SER DA T OU T P0.4 Output Serial data out—thi s signal taps into the SCXIbus MISO line to accept serial output data from a module. 27 D A Q D*/A P0.1 Input Board data/address line—this signal taps into the SCXIbus D*/A line to indicate to the module whether the incoming serial s ...
-
National Instruments SCXI-1503 - page 26
© National Instruments Corpor ation 3-1 SCXI-1503 User Manual 3 Configuring and T esting This chapter discusses configuring th e SCXI-1503 in MAX using NI-DAQmx, creating and testing a virtu al channel, global channel, and/or task. Notes Y ou must have NI-D A Qmx 8.1 or later installed. Refer to the SCXI Quick Start G uide if you hav e not already ...
-
National Instruments SCXI-1503 - page 27
Chapter 3 Configur ing and T esting SCXI-1503 User Manual 3-2 ni.com Input Coupling The front end of the SCXI-1503 includ es a software configurable switch that allows you t o programmatical ly connect the input channels of the SCXI-1503 to either the front co nnector or internal groun d. When using autozero, the coupling mode is set automat ically ...
-
National Instruments SCXI-1503 - page 28
Chapter 3 Configurin g and T esting © National Instruments Corpor ation 3-3 SCXI-1503 User Manual NI-DAQmx Using NI-DAQmx, you can configure softwa re settings such as sensor typ e and gain/input signal range in the followin g ways: • T ask or global channel i n MAX • Functions in your application Note All software-configurable settings are no ...
-
National Instruments SCXI-1503 - page 29
Chapter 3 Configur ing and T esting SCXI-1503 User Manual 3-4 ni.com selecting channels. If you are creat ing a channel, you can only select one channel. Click Next . 7. Name the task or channel and click Finish . 8. Select the channel(s) you want to configure. Y ou can select a range of channels by holding do wn the <Shift> ke y while select ...
-
National Instruments SCXI-1503 - page 30
Chapter 3 Configurin g and T esting © National Instruments Corpor ation 3-5 SCXI-1503 User Manual 6. Click the Test button. 7. Click the Start button. 8. After you hav e completed verifying the channels, click the Stop button. Y ou have no w verif ied the SCXI-1503 configuration and signal co nnection. Note For more information on how to further c ...
-
National Instruments SCXI-1503 - page 31
© National Instruments Corpor ation 4-1 SCXI-1503 User Manual 4 Theor y of Operation This chapter provides a brief overview and a detailed discu ssion of the circuit features of the SCXI-1503 module. Refer to Figure 4-1 while reading this section. ...
-
National Instruments SCXI-1503 - page 32
Chapter 4 Theory of Operation SCXI-1503 User Manual 4-2 ni.com Figure 4-1. Block Diagram of SCXI-1503 AI 15 + AI 15 – Calibration Source SCXIbus Interface CJSENSOR F ront Signal Connector Rear Signal Connector 32-to-1 Mux Input Protection and Lowpass Filter Switch Switch Switch Mux Inst. Amp + – AI 0 + AI 0 – AI 0 + AI 0 – Lowpass Filter Bu ...
-
National Instruments SCXI-1503 - page 33
Chapter 4 Theory of Ope ration © National Instruments Corpor ation 4-3 SCXI-1503 User Manual The major components of the SCXI-1503 modul es are as follo ws: • Rear signal connector • SCXIb us connector • SCXIbus interface • Digital control cir cuitry • Analog circuitry The SCXI-1503 modules co nsist of 16 multiplexe d input channels, eac ...
-
National Instruments SCXI-1503 - page 34
Chapter 4 Theory of Operation SCXI-1503 User Manual 4-4 ni.com The CJ SENSOR input channel is used to read the sensor temperature from the terminal block. The temperature sensor is for cold-junction compensation of thermocouple meas urements. The CJ SENSOR channel also passes through a 5 Hz lo wpass f ilter to reject unwanted noise on the SCXI-1503 ...
-
National Instruments SCXI-1503 - page 35
Chapter 4 Theory of Ope ration © National Instruments Corpor ation 4-5 SCXI-1503 User Manual The module includes first-in first-out (FIFO) memory fo r storing the channel scan list defined in your appli cation code. NI-D A Q dri vers load the FIFO based on the channel assig nments you make in your application. Y ou need not explicitly program th e ...
-
National Instruments SCXI-1503 - page 36
Chapter 4 Theory of Operation SCXI-1503 User Manual 4-6 ni.com changes in resistance, you must use special conf igurations that minimize measured errors caused by lead-wire resistance. R TD Measurement Errors Because the RTD is a resistive device, you must pass a cu rrent through the device and monitor the resultin g volta ge. However, any resistan ...
-
National Instruments SCXI-1503 - page 37
Chapter 4 Theory of Ope ration © National Instruments Corpor ation 4-7 SCXI-1503 User Manual defined as the change in RTD resistance from 0 to 100 ° C, divided by the resistance at 0 ° C, divided by 100 ° C: where R 100 is the resistance of the R TD at 100 ° C. R 0 is the resistance of the R TD at 0 ° C. For e xample, a 100 Ω platinum R TD w ...
-
National Instruments SCXI-1503 - page 38
Chapter 4 Theory of Operation SCXI-1503 User Manual 4-8 ni.com Although the resistance-temperature curv e is relativ ely linear , accurately con verting measured resistance to temperature requires curve fitting. The following Callendar-V an Dusen equation is commonly used to approximate the R TD curve: where R T is the resistance of the R TD at tem ...
-
National Instruments SCXI-1503 - page 39
Chapter 4 Theory of Ope ration © National Instruments Corpor ation 4-9 SCXI-1503 User Manual For temperatures abo v e 0 ° C, coef ficient C equals 0, reducing this equation to a quadratic. If you pass a known current, I EX , through the R TD and measure the output v oltage dev eloped across the R T D, V 0 , you can solve for T as follo ws: where ...
-
National Instruments SCXI-1503 - page 40
Chapter 4 Theory of Operation SCXI-1503 User Manual 4-10 ni.com Thermistors A thermistor is a piece of semiconductor made from metal oxides, pressed into a small bead, disk, wafer, or other shape, sintered at high temperatures, and finally coated with epoxy or glass. Th e resulting device exhibits an electrical resistance that varies with temperatu ...
-
National Instruments SCXI-1503 - page 41
Chapter 4 Theory of Ope ration © National Instruments Corpor ation 4-11 SCXI-1503 User Manual Figure 4-4. Resistanc e-T emperature Cur ve for a 2,252 Ω Thermistor The thermistor has been used primaril y for high-resolution measurem ents ov er limited temperature ranges. Howe ver , cont inuing improvements in thermistor stability , accuracy , and ...
-
National Instruments SCXI-1503 - page 42
Chapter 4 Theory of Operation SCXI-1503 User Manual 4-12 ni.com The maximum resistance of the therm ist or is determined from the current excitation v alue and the maximum voltage range of the input device. When using the SCXI-1503, the maximum measurable resistance is 100 k Ω . The lev el of the v oltage output signal depends directly on the ther ...
-
National Instruments SCXI-1503 - page 43
Chapter 4 Theory of Ope ration © National Instruments Corpor ation 4-13 SCXI-1503 User Manual where T (°K) is the temperature in de grees K elvin, equal to T (°C) + 273.15. R T is the resistance of the thermistor . a, b, and c are coef f icients obtained from the thermistor manufacturer or calculated from the resistance-v ersus-temperature curve ...
-
National Instruments SCXI-1503 - page 44
© National Instruments Corpor ation 5-1 SCXI-1503 User Manual 5 Using the SCXI-1503 This chapter makes suggestions for developing you r application and provides basic info rmation regarding cal ibration. Developing Y our Application in NI-DAQmx Note If you are not using an NI ADE, using an NI ADE prior to version 8.1, or are using an unlicensed co ...
-
National Instruments SCXI-1503 - page 45
Chapter 5 Using the SCXI-1503 SCXI-1503 User Manual 5-2 ni.com Figure 5-1. T ypical Program Flowchart for Voltage Measurement Channels Ye s Create Channel Adjust Timing Settings Create a T ask Programmatically Create T ask in D A Q Assistant or MAX No Hardware Timing/T rigger ing? Create T ask Using D A Q Assistant? No Ye s No Ye s Configure Channe ...
-
National Instruments SCXI-1503 - page 46
Chapter 5 Using the SCXI-1503 © National Instruments Corpor ation 5-3 SCXI-1503 User Manual General Discussion of T ypical Flowchart The following sections b riefly discuss some considerations for a few of the steps in Figure 5-1. These sections are meant to give an overview o f some of the options and featur es available when prog ramming with NI ...
-
National Instruments SCXI-1503 - page 47
Chapter 5 Using the SCXI-1503 SCXI-1503 User Manual 5-4 ni.com time. For continuous acquisition, you must use a while loop around the acquisition componen ts e ven if you configured the task for continuous acquisition using MAX or the DA Q Assistant. For continuous and buf fered acquisitions, you can set the acqui sition rate and the number of samp ...
-
National Instruments SCXI-1503 - page 48
Chapter 5 Using the SCXI-1503 © National Instruments Corpor ation 5-5 SCXI-1503 User Manual Analog Input»General Properties»Advanced» Gain and Offset»Ga in Value AI.Gain Specif ies a g ain factor to apply to the signal condition ing portion of the channel . The SCXI-1503 supports 1 o r 100. No Analog Input»General Properties»Advanced» High ...
-
National Instruments SCXI-1503 - page 49
Chapter 5 Using the SCXI-1503 SCXI-1503 User Manual 5-6 ni.com Analog Input»Temperature» RTD»Custom»A, B, C AI.R TD.A AI.R TD.B AI.R TD.C Specifies the A, B, or C constant of the Callendar-V an D usen equation when using a custom R TD type. Ye s Analog Input»General Properties»Si gnal Conditioning»Resistance Configuration AI.Resistance.Cfg S ...
-
National Instruments SCXI-1503 - page 50
Chapter 5 Using the SCXI-1503 © National Instruments Corpor ation 5-7 SCXI-1503 User Manual Note This is not a complete list of NI-DA Qmx properties and does not include ev ery property you may need to configure your application. It is a representativ e sample of important properti es to configure for volt age measurements. F or a complete list of ...
-
National Instruments SCXI-1503 - page 51
Chapter 5 Using the SCXI-1503 SCXI-1503 User Manual 5-8 ni.com charts, graphs, slide controls, and ga uge indicators. NI ADEs hav e tools that allow you to easily sa ve the data to f iles such as spread sheets for easy viewing, ASCII files for uni versality , or binary files for smaller file sizes. Completing th e Application After you have complet ...
-
National Instruments SCXI-1503 - page 52
Chapter 5 Using the SCXI-1503 © National Instruments Corpor ation 5-9 SCXI-1503 User Manual Create V irtual Channel(s) DAQMX Create Virtual Channel.vi located on the Functions»All Functions» NI Measurements»DAQmx - Data Acquisition subpalette—Use this VI to add virtual channels to the task. Select the type of vir tual channel base d on the me ...
-
National Instruments SCXI-1503 - page 53
Chapter 5 Using the SCXI-1503 SCXI-1503 User Manual 5-10 ni.com Using a NI-DAQmx Channel Property Node in LabVIEW You can use property no des in LabVIEW to manual ly configure the channels. To create a LabVIEW prope rty node, complete the following steps: 1. Launch LabVIEW . 2. Create the property node in a new VI or in an e xisting VI. 3. Open the ...
-
National Instruments SCXI-1503 - page 54
Chapter 5 Using the SCXI-1503 © National Instruments Corpor ation 5-11 SCXI-1503 User Manual Note Refer to the LabVIEW He lp for information about pr operty nodes and specific NI-D A Qmx proper ties. Specifying Channel St rings in NI-DAQmx Use the channel input of DAQmx Create Channel to specify the SCXI-1503 channels. The input control/constant h ...
-
National Instruments SCXI-1503 - page 55
Chapter 5 Using the SCXI-1503 SCXI-1503 User Manual 5-12 ni.com Note Refer to the NI LabWindows/CVI Help for more inform ation on creating NI-D A Qmx tasks in LabW indo ws/CVI and NI-D A Qmx prop erty information. Measurement Studio (Visual Basic 6, .NET , and C#) When creating an voltage measurement task in Visual Basic 6, .NET and C#, follow the ...
-
National Instruments SCXI-1503 - page 56
Chapter 5 Using the SCXI-1503 © National Instruments Corpor ation 5-13 SCXI-1503 User Manual Programmable NI-D AQmx Properties All of the different ADEs that configure the SCXI-1503 access an underlying set of NI-DAQmx prop erties. Tables 5-1 through 5-4 provide a list of s ome of the p roperties that configure the SCXI-1503. You can use this list ...
-
National Instruments SCXI-1503 - page 57
Chapter 5 Using the SCXI-1503 SCXI-1503 User Manual 5-14 ni.com The functions that are requ ired for externally calib rating the SCXI-1503 are av ailable in NI-D A Qmx 8.1 o r later . Refer to the NI-DAQmx Help for details about these functions. Most external calibration documents for SCXI modules are av ailable to download from ni.com/calibration ...
-
National Instruments SCXI-1503 - page 58
© National Instruments Corpor ation A-1 SCXI-1503 User Manual A Specifications This appendix lists the specifications for the SCXI-1503 modules. These specif ications are typical at 25 ° C unless otherwise noted. Analog Input Input Characteristics Number of channels ........ ..... ...... ............ 16 differential Input coupling ............... ...
-
National Instruments SCXI-1503 - page 59
Appendix A Specifications SCXI-1503 User Manual A-2 ni.com Gain = 100 Calibrated 1 .............. ............ ......±25 μ V max ±10 μ V typ With autozero enabled 2 ........ ....±10 μ V max ±5 μ V typ Gain error (relative to calibration refe rence) Gain = 1 or 100 Calibrated 1 .............. ............ ......0.074% of reading max 0.02% of ...
-
National Instruments SCXI-1503 - page 60
Appendix A Specifications © National Instruments Corpor ation A-3 SCXI-1503 User Manual CMRR characteristics (DC to 60 Hz) Gain 1 ....................... ........... ............ –75 dB min –90 dB typ Gain 100 ................... ........... ............ –106 dB min –110 dB typ Output range .................... .............. ......... ±1 ...
-
National Instruments SCXI-1503 - page 61
Appendix A Specifications SCXI-1503 User Manual A-4 ni.com Gain temperature coefficient (gain 1 or 100) ...................... .............. ....±15 ppm/ ° C max ±5 ppm/ ° C typ Excitation Channels ... ........... ............... .............. ......16 single-ended outputs Current output ....................... .............. ....100 μ A Acc ...
-
National Instruments SCXI-1503 - page 62
Appendix A Specifications © National Instruments Corpor ation A-5 SCXI-1503 User Manual Physical Figure A-1. SCXI-1503 Dimensions Weight .................... .............. ........... ....... 745 g (26.3 oz) Maximum W orking Voltage Maximum working voltage refers to the signal voltage plus the common-mode voltage. Signal + common mode .. ........ ...
-
National Instruments SCXI-1503 - page 63
Appendix A Specifications SCXI-1503 User Manual A-6 ni.com Safety This product is designed to meet the requirements of the following standards of safety for electrical e quipment for measurement, control, and laboratory use: • IEC 61010-1, EN-61010-1 • UL 61010-1, CSA 61010-1 Note For UL and other safety certifications, refer to the product lab ...
-
National Instruments SCXI-1503 - page 64
© National Instruments Corpor ation B-1 SCXI-1503 User Manual B Removing the SCXI-1503 This appendix explains ho w to remove the SCXI-1503 from MAX and an SCXI chassis or PXI/SC XI combination chassis. Removing the SCXI-1503 from MAX T o remov e a module from MAX, complete the follo wing steps after launching MAX: 1. Expand Devices and Interfaces ...
-
National Instruments SCXI-1503 - page 65
Appendix B Removing the SCXI-1503 SCXI-1503 User Manual B-2 ni.com 4. Rotate the thumbscre ws that secu re the SCXI-1503 to the chassis counterclockwise until they are loose, but do not completely remove the thumbscrews. Remov e the SCXI-1503 by pulling steadily on both thumbscrews until the module slides comp letely out. Figure B-1. Removing the S ...
-
National Instruments SCXI-1503 - page 66
© National Instruments Corpor ation C-1 SCXI-1503 User Manual C Common Questions This appendix lists com mon questions related to the u se of the SCXI-1503. Which version of NI-D AQ w orks with the SCXI-1503, and how do I get the most current v ersion of NI-D AQ? Y ou must hav e NI-D A Q 8.1 or later . V isit the NI W eb site at ni.com and select ...
-
National Instruments SCXI-1503 - page 67
Appendix C Comm on Questions SCXI-1503 User Manual C-2 ni.com Can I connect N current-output ch annels in parallel to cr eate a precision curr ent sour ce that pr ovides N × 100 μ A? Y es, you can connect the current output in parallel. When connecting the output in parallel, connect the appropriate IEX+ terminals togeth er and the corresponding ...
-
National Instruments SCXI-1503 - page 68
Appendix C Common Questions © National Instruments Corpor ation C-3 SCXI-1503 User Manual Does short-circuiting a curr ent-out put channel d o any damage to the SCXI-1503? No. The SCXI-1503 del i vers 100 μ A into any load from 0 Ω to 100 k Ω . Does open-circuiting a curr en t-outp ut channel damage the SCXI-1503? What is the open-circuit volta ...
-
National Instruments SCXI-1503 - page 69
© National Instruments Corpor ation G-1 SCXI-1503 User Manual Glossar y Symbol Pref ix V alue µ micro 10 –6 m milli 10 –3 k kilo 10 3 Mm e g a 1 0 6 Numbers/Symbols % percent + positi v e of, or pl us – negati v e of, or minus ± plus or minus < less than /p e r °d e g r e e Ω ohms +5 V (signal) +5 VDC source signal A A amperes ADE app ...
-
National Instruments SCXI-1503 - page 70
Glossary SCXI-1503 User Manual G-2 ni.com B bit one binary digit, either 0 or 1 C CE European emissions control standard C GND chassis ground signal channel pin or wire lead to which you apply , or from which you read, an analog or digital si gnal. Analog sign als can be single-ended or dif ferential. F or digital signals, channels (also known as l ...
-
National Instruments SCXI-1503 - page 71
Glossary © National Instruments Corpor ation G-3 SCXI-1503 User Manual D GND digital ground signal differential ampl ifier an amplifier with two input terminals, neither of which are ti ed to a ground reference, whose v oltage diff erence is amplif ied DIN Deutsche Industrie Norme (German Industrial Standard) DIO digital input/ou tput DoC Declarat ...
-
National Instruments SCXI-1503 - page 72
Glossary SCXI-1503 User Manual G-4 ni.com J jumper a small rectangular device used to connect two adjacent posts on a circuit board. Jumpers are used on so me SCXI modul es and terminal blocks to either select certain parameters or enabl e/disable circui t functionality . L lead resistance the small resistance of a lead wire. The resistance v a rie ...
-
National Instruments SCXI-1503 - page 73
Glossary © National Instruments Corpor ation G-5 SCXI-1503 User Manual O output voltage compliance the largest v oltage that can be gene rated across the output of a current source without the current goi ng out of specification OUT REF output reference signal P ppm parts per milli on PXI PCI eXtensions for Instrumentation— an open specification ...
-
National Instruments SCXI-1503 - page 74
Glossary SCXI-1503 User Manual G-6 ni.com sensor a type of transducer that con verts a phys ical phenomenon into an electrical signal SER CLK serial clock signal u sed to sync hronize digit al data transfers ov er the SER D A T IN and SER DA T OUT lines SER D A T IN serial data input signal SER D A T OUT serial data output signal signal conditionin ...
-
National Instruments SCXI-1503 - page 75
Glossary © National Instruments Corpor ation G-7 SCXI-1503 User Manual VI virtual instrument—(1) a combination of hardware and/or software elements, typically used with a PC, th at has the functionality of a classic stand-alone instrument; (2) a LabV IEW software module (VI), which consists of a front panel user interf ace and a block diagram pr ...
-
National Instruments SCXI-1503 - page 76
© National Instruments Corpor ation I-1 SCXI-1503 User Manual Index Numerics 2-wire configuration of resistive devices, 2-4 3-wire resistive sensor connected in 2-wire configuration, 2-5 lead-resistance compensation with two matched current sources, 2-6 4-wire configuration of resistive devices, 2-3 A adjusting tim ing and triggeri ng, 5-3 AI 0 si ...
-
National Instruments SCXI-1503 - page 77
Index SCXI-1503 User Manual I-2 ni.com conventions used in the manual, iv creating a task DAQ Assistant, 5-3 programmatically, 5-3 current output channels, questions about, C-1, C-3 current sources, operating, 4-4 custom cables, 2-1 D DAQ Assistant, cr eating a task, 5-3 DAQ device accessing unused analog input channels, C-2 DAQ devices unavailable ...
-
National Instruments SCXI-1503 - page 78
Index © National Instruments Corpor ation I-3 SCXI-1503 User Manual NI-DAQmx channel property node, 5-10 program flowchar t (figure), 5- 2 programmable properties, 5-13 specifying channel strings, 5-11 RTD measurement proper ties (table), 5-5 thermistor measurement properties (table), 5-6 thermocouple measur ement properties (table), 5-7 voltage m ...
-
National Instruments SCXI-1503 - page 79
Index SCXI-1503 User Manual I-4 ni.com signals verifying, 3-4 NI-DAQmx, 3-4 software, NI-DAQ v ersion required, C-1 specifications analog input, A-1 CE compliance, A-6 electromagnetic comp atibility, A-6 environment, A-4 excitation, A-4 filters, A-3 maximum working vo ltage, A-5 physical, A-5 power requirements from SCX I backplane, A-4 safety, A-6 ...
Do you have a question concerning National Instruments SCXI-1503?
Use the form below
If you did not solve your problem by using a manual National Instruments SCXI-1503, ask a question using the form below. If a user had a similar problem with National Instruments SCXI-1503 it is likely that he will want to share the way to solve it.