English dropdown-ico

Manual Toro 2011

16 pages 0.53 mb
Download

Go to site of 16

Summary
  • Toro 2011 - page 1

    Introduction The Field Interface Unit (FIU) provides the communications hardware link between the SitePro TM central computer , the SitePro compatible field satellite controllers and the SitePro Central Decoder System components. The FIU is available in four configu- rations to provide various combinations of wireline and radio communication paths. ...

  • Toro 2011 - page 2

    6 5 5 7 15 8 9 10 11 13 16 14 17 18 20 12 19 22 21 23 24 1 2 3 4 Figure 2 - Model 2020 (two wireline ports) 1 - Central Computer 2 - Field Interface Unit 3 - COM Port 1 4 - COM Port 2 5 - DB-9/DB-9 Serial Cable 6 - Power Adapter 7 - Auxiliary Port (optional for sensors) 8 - Channel 2 (in) 9 - Channel 1 (in) 10 - 12 V d.c. Power Jack 1 1 - 1.5A Fuse ...

  • Toro 2011 - page 3

    3 6 7 13 8 9 10 11 14 15 16 18 17 19 1 2 12 20 3 5 5 4 21 24 23 25 26 22 1 - Central Computer 2 - Field Interface Unit 3 - COM Port 1 4 - COM Port 2 5 - DB-9/DB-9 Serial Cable 6 - Power Adapter 7 - Auxiliary Port (optional for sensors) 8 - Channel 3 (in) 9 - Channel 1 (in) 10 - 12 V d.c. Power Jack 1 1 - 1.5A Fuse 12 - COM Line 1 13 - RJ1 1 Modular ...

  • Toro 2011 - page 4

    7 8 19 17 9 10 12 11 13 20 21 22 24 23 25 27 26 28 1 2 6 6 6 18 14 16 3 4 5 15 31 30 32 33 29 1 - Central Computer 2 - Field Interface Unit 3 - COM Port 1 4 - COM Port 2 5 - COM Port 3 6 - DB-9/DB-9 Serial Cable 7 - Power Adapter 8 - Auxiliary Port (optional for sensors) 9 - Channel 3 (in) 10 - Channel 2 (in) 1 1 - Channel 1 (in) 12 - 12 V d.c. 13 ...

  • Toro 2011 - page 5

    Installing the Field Interface Unit, W all Plate Assembly and Sur ge Protection Unit 1. Position the Field Interface Unit within 6' (1.8 m) of the PC. Note: Maximum distance is 50' (15.2 m). 2. Using the serial cable(s) supplied, connect the PC to the FIU as illustrated in the appropriate configuration diagram Figure 1–5 . 3. Note: The ...

  • Toro 2011 - page 6

    7. A 25' (7.6 m) length interface cable is supplied for the connection of the modular wall plate to the SPU. Select an installa- tion site for the SPU on an outside wall, within the cable reach, and 3' to 5' (0.9 m to 1.5 m) above ground level for straight and easy access to an earth ground. Attach the SPU securely to the wall using ...

  • Toro 2011 - page 7

    Procedure 1. Drive a 5/8" (16 mm) by 8' (2.5 cm) copper-clad steel ground rod into well-moistened soil not more than 8' (2.5 cm) from the SPU. The top of the ground rod should be 12" (30.5 cm) below grade level. 2. Install 3/4" (19 mm) conduit from the bottom of the SPU enclosure to approximately 12" (30.5 cm) below gr ...

  • Toro 2011 - page 8

    Communication Cab le T est Correct installation of the communication cable is essential for proper operation of the wireline control system. The communi- cation cable must be tested for the presence of significant voltage, circuit continuity and excessive resistance. A digital mult i- meter and a 620 ohm resistor are required to perform the followi ...

  • Toro 2011 - page 9

    Processor Read y: Indicator light will illuminate when the microprocessor in the FIU has received configuration instructions from PC and is ready to communicate with satellites or DIUs. Field T ransmit: Indicator light will illuminate or flash during transmission of data to field satellites or DIU(s). Field Receive/Busy: Indicator light will illumi ...

  • Toro 2011 - page 10

    Note: The Motorola radio service software screens shown in Figure 12 , 13 , and 14 are for example only . Later service software versions may not be formatted as shown, however , the items within boxes must be set as indicated to enable system operation. Radio Components Connection 1. Using the cables provided in the kit, connect the radio, power s ...

  • Toro 2011 - page 11

    Radio-Link System Setup 1. Reconnect power to the FIU and switch on all components. The central computer should be booted up and the SitePro pro- gram operational. See Figure 3 and 4 respectively for hardware configuration of model FIU-201 1 and FIU-2021. 2. From the SitePro program menu bar , select: Setup> Hardware. 3 From the “ System ” t ...

  • Toro 2011 - page 12

    SitePro Central Decoder System Connection The SitePro Central Decoder System (CDS) program works in conjunction with the SitePro Field Interface Unit Model 2010 and the Decoder Interface Unit (DIU). Connect the FIU, central computer , SPU and the DIU(s) as shown in Figure 16 . All hardware is provided for connection except shielded, twisted-pair co ...

  • Toro 2011 - page 13

    4 5 6 6 5 4 2 7 Pin 2 Pin 2 Pin 1 Pin 1 2 3 3 1 Figure 16 - DIU Connection Overview Figure 17 RJ45 Cable to Wall Plate 13 Y ellow Y ellow Y ellow Gray Gray Gray 1 - Surge Protection Unit 2 - Communication Cable 3 - Duplex Conduit Box 4 - RJ45 Modular W all Plate Assembly 5 - RJ45 Modular Cable 6 - Decoder Interface Unit 7 - 620 Ohm Resistor ...

  • Toro 2011 - page 14

    14 Figure 18 - Illustrated Parts Listing, FIU Models 2010, 2020, 201 1 and 2021 See Detail B See Detail C Detail B Detail C Phone Jack View A-A (Bottom View of Item 9) A A ...

  • Toro 2011 - page 15

    15 Item No. P ar t No. Description Quantity P er Assy . Refer to Figure 18 for the f ollowing items: 1 - - - - - - - Housing, SNCX, FIU 1 2 - - - - - - - Bracket, FIU (See Service Item 102-0867) 1 3 - - - - - - - Front Plate, LED Display (See Service Item 102-0872) 1 4 360-0750 Holder , Fuse 1 5 360-0749 Fuse, 1.5 Amp, (10-pack) 1 6 - - - - - - - R ...

  • Toro 2011 - page 16

    T roubleshooting If a malfunction occurs, follow the suggested steps to identify and fix the problem. If the problem cannot be resolved there may be a problem with the FIU, the satellite or the DIU. If you have current NSN support, please call T oro NSN at 1-800-527- 4248. Otherwise, please call our T oro Help Line , 1-800-664-4740 Monday through F ...

Manufacturer Toro Category Network Router

Documents that we receive from a manufacturer of a Toro 2011 can be divided into several groups. They are, among others:
- Toro technical drawings
- 2011 manuals
- Toro product data sheets
- information booklets
- or energy labels Toro 2011
All of them are important, but the most important information from the point of view of use of the device are in the user manual Toro 2011.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Toro 2011, service manual, brief instructions and user manuals Toro 2011. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Toro 2011.

Similar manuals

A complete manual for the device Toro 2011, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Toro 2011 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Toro 2011.

A complete Toro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Toro 2011 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Toro 2011, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Toro 2011, that we can find in the current document
3. Tips how to use the basic functions of the device Toro 2011 - which should help us in our first steps of using Toro 2011
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Toro 2011
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Toro 2011 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Toro 2011?

Use the form below

If you did not solve your problem by using a manual Toro 2011, ask a question using the form below. If a user had a similar problem with Toro 2011 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)