English dropdown-ico

Manual Sanus Systems CFAR47

13 pages 2.67 mb
Download

Go to site of 13

Summary
  • Sanus Systems CFAR47 - page 1

    Assembly Instructions for Model: CF AR47 Thank you for choosing the Component Furniture line from Sanus Systems! Use this manual to congure the CF AR47 as shown on the right. The CF AR47 is de - signed to hold a LCD, Plasma or DLP TV . Safety W arning: If you do not understand these directions, or have any doubts about the safety of the installa ...

  • Sanus Systems CFAR47 - page 2

    Parts: Not all parts shown at the same scale (1) Shelf Retainer - u (1) Shelf Bracket - v (4) Small Door Hinge - w (4) Foot - s (4) Door Knob - t ** (4) Hinge Plate - x** (4) Bi-fold Hinge - y (4) Hinge Car - z (2) Furniture Bracket - aa (2) W all Bracket - bb (3) Front Rail - cc (3) Back Rail - dd (2) Door - hh (2) Bi-fold Door - gg (2) Side Panel ...

  • Sanus Systems CFAR47 - page 3

    Step 1: Add Wood Shelf Pins and Feet to Side Panels Insert a W ood Shelf Pin (h) into the holes adjacent to the two lower sets of cams in each Side Panel (ee). See Detailed V iew A of Diagram 1 for assistance. Add a Foot (s) to each pillar of the Side Panel (ee). If you wish to install the Carpet Spikes (a), thread each Carpet Spike into the Foot. ...

  • Sanus Systems CFAR47 - page 4

    Step 2: Add Front and Back Rails Add Front Rails - Attach the Front Rail (cc) to the Side Panel Assembly (ee) by sliding the clamp down the groove in each Side Panel pillar as shown in the T op V iew of Diagram 2. Make sure the smooth side of the Front Rail is facing outward and the open channel faces down as seen in the Detailed V iew below on the ...

  • Sanus Systems CFAR47 - page 5

    Step 3: Prepare TV Shelf Insert two W ood Screws (i) through the Shelf Bracket (v) and into the underside of the W ood Shelf (kk). T ighten each W ood Screw with a phillips screw driver . See Diagram 3 for assistance. Diagram 3 k k i v Step 4: Add Wood Shelves Press t the W ood Shelves (kk) so they lock into the W ood Shelf Pins (h). Once each s ...

  • Sanus Systems CFAR47 - page 6

    Step 5: Secure upper Wood Shelf Secure the Shelf Retainer (u) to the upper W ood Shelf (kk) by inserting a W ood Screw (i) through the Shelf Retainer and thread it into the W ood Shelf. Secure the Shelf Bracket (v) to the upper Back Rail (dd) by threading a Phillips Pan Head Bolt (e) through the Shelf Bracket and into the Back Rail (dd). See Diagra ...

  • Sanus Systems CFAR47 - page 7

    Step 7: Add Front and Back Rail Add Front Rail - Attach the Front Rail (cc) to the Side Panel (ee) by sliding the clamp down the groove in each Side Panel pillar as shown in the T op V iew of Diagram 7. Make sure the smooth side of the Front Rail is facing outward and the open channel faces down. Once the T op of the Front Rail is level with the Si ...

  • Sanus Systems CFAR47 - page 8

    Step 8: Add Back Panels Add Back Panels (ff) to the assembly by inserting a Back Panel Bolt (d) through each hole in the Back Panels, a Spacer (c) and thread it into the inserts in the Back Rail (dd). Before tightening the Back Panel Bolts, insert the Furniture Bracket (aa) under the Back Rail. Once the Back Panels are secured, the Furniture Bracke ...

  • Sanus Systems CFAR47 - page 9

    Step 9: Add T op Insert a Dowel (f) into each hole in the bottom side of the T op (ii). Add T op so each Dowel is secured in the corner pillar in the Side As - sembly (ee). See Diagram 9 for assistance. Diagram 9 Detailed View ii f Step 10: Add Glass Shelf Add Glass Shelf Pins (g) to the desired locations into the Side Panel (ee) in the lower porti ...

  • Sanus Systems CFAR47 - page 10

    Step 1 1: Add Hinges and Knobs Add Hinges (w ,y) to the Doors (gg,hh) by inserting a Hinge Screw (l) through the Hinge and into the Door . T ighten each with a phillips screw driver . Attach the Door Knobs (t) by inserting a Knob Bolt (j) through the Door (gg,hh) and into the Door Knob. Tighten each with a phillips screw driver . Repeat process unt ...

  • Sanus Systems CFAR47 - page 11

    Step 12: Add Hinge Plates and Small Doors Add the Hinge Plates (x) by inserting a Hinge Plate Screw (k) through the Hinge Plate, and into the holes in the Side Panel (ee). T ighten each with a phillips screw driver . Repeat the process for all four Hinge Plates. See Diagram 12 for assistance. T o attach each Hinge (w) to its Hinge Plate (x), the bo ...

  • Sanus Systems CFAR47 - page 12

    Step 14: Secure W all Bracket to wall Locate two wood studs using a stud nder . It is a good idea to verify where the stud is with a awl or a thin nail. Mark the location of each stud. T o nd the height, measure 54 inches up from the oor . Mark the location on the stud. Drill a 2.5” deep hole with a 3/16” drill bit at each marked locat ...

  • Sanus Systems CFAR47 - page 13

    Step 16: Hinge Adjustment for small Door Each hinge Assembly is adjustable in multiple directions. See Diagram 16 for assistance. Diagram 16 Side Adjustment Depth Adjustment Height Adjustment Step 17: Hinge Adjustment for Bi-fold Door T o adjust the Bi-fold Hinges (y), loosen the screws labeled in the Diagrams below for the specied movement. Not ...

Manufacturer Sanus Systems Category Patio Furniture

Documents that we receive from a manufacturer of a Sanus Systems CFAR47 can be divided into several groups. They are, among others:
- Sanus Systems technical drawings
- CFAR47 manuals
- Sanus Systems product data sheets
- information booklets
- or energy labels Sanus Systems CFAR47
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sanus Systems CFAR47.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sanus Systems CFAR47, service manual, brief instructions and user manuals Sanus Systems CFAR47. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sanus Systems CFAR47.

Similar manuals

A complete manual for the device Sanus Systems CFAR47, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sanus Systems CFAR47 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sanus Systems CFAR47.

A complete Sanus Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sanus Systems CFAR47 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sanus Systems CFAR47, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sanus Systems CFAR47, that we can find in the current document
3. Tips how to use the basic functions of the device Sanus Systems CFAR47 - which should help us in our first steps of using Sanus Systems CFAR47
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sanus Systems CFAR47
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sanus Systems CFAR47 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sanus Systems CFAR47?

Use the form below

If you did not solve your problem by using a manual Sanus Systems CFAR47, ask a question using the form below. If a user had a similar problem with Sanus Systems CFAR47 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)