English dropdown-ico

Manual Nortel CVX 600

168 pages 3.81 mb
Download

Go to site of 168

Summary
  • Nortel CVX 600 - page 1

    296- 1011 -202 Docume nt Revi sion 0 2.01 CVX Multi-Service Access Switch Releas e 5.0 August 200 1 CVX 600 Multi-Service Access Switch Hardware In st alla tion Guid e ...

  • Nortel CVX 600 - page 2

    *Nortel, Nortel Network s, the Nortel Network s corporate logo, t he Globemark design, and CVX are trademarks of Nortel Networks. All other trademarks are the property of their owners. © 2001 Nortel Networks. All rights reserved. Information i n this document is subject to change without notice. Nortel Networks assumes no responsibility for any er ...

  • Nortel CVX 600 - page 3

    296- 1011-202 R el. 5.0, Doc. Rev . 02.01 iii Regulatory and Safety Regu l at or y Infor m at ion U.S.A. Requirement s FCC Radio Frequency Notice for the C VX 600 Acc ess Switch This devic e complies with Part 15 of th e FCC Rules. Ope ration is subj ect to the follo wing two cond itions: • This dev i ce may not ca use harmf ul i nterfere nce. ? ...

  • Nortel CVX 600 - page 4

    Regulatory Information iv 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide If yo u experien ce trou ble wit h thi s equi pment, pleas e contact Nortel Ne tworks for r epai r and warr anty i nform ation. If there is a proble m with the ne twork, the telephon e company m ay reques t that yo u remove th e equipme nt fro ...

  • Nortel CVX 600 - page 5

    Regulatory Information 296-10 11-202 Rel. 5.0, Doc. R ev. 02.0 1 v Regulatory and Safet y Before insta lling this e quipment, ensure that it is p ermissible to con nect to the fa cilities of t he local teleco mmu nication s compan y . Y ou must install th is equipmen t using an acc eptab l e connect ion method . Repai rs to c e r tifie d equi pme n ...

  • Nortel CVX 600 - page 6

    Regulatory Information vi 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Jap an/Nippon Requireme nt s Only V olunt ary Control Council for I nterference (VCCI) S t atement V olunt ary Control Council for I nterference (VCCI) S t atement This eq uipment is in the 1s t category (informa tion equip ment to be used in ...

  • Nortel CVX 600 - page 7

    Safety Wa rnings 296-10 11-202 Rel. 5.0, Doc. Rev. 02.0 1 vii Regulatory and Safet y Safe ty W a rnin gs General W arnings The following safety warnings apply : • Mecha nical haz ards and elect rical sh ock hazard s are p ossible i f you remove on e or mo re of the modu les. The re are no ope ra tor-servi ce able mo dule s. Only qu al ifie d pers ...

  • Nortel CVX 600 - page 8

    Safe ty W arni ngs viii 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Lithium Battery C aution Caution: Danger of explosion if battery is incorrectly replaced . Replace o nly with the sa me or equiv alent typ e recommende d by t he man ufacturer . Discard us ed ba tterie s accordi ng to t he man ufacturer ’ s in ...

  • Nortel CVX 600 - page 9

    296-10 11-202 Rel. 5.0, Doc. R ev. 02.0 1 ix Contents Contents Regulatory and Safe ty Regulator y Inform ati on ................... ...... ....... ...... ....... ...... ....... ...... ...... ....... ...... ....... ............ i i i U.S.A. Requir em ents .. ...... ....... ............. ...... ....... ............. ...... ...... ............. ...... ...

  • Nortel CVX 600 - page 10

    x 296-10 11-202 Re l. 5.0, Doc. Rev . 02.01 Contents Chapter 1 Chassis Installation About This Chapte r ................... ....... ...... ....... ...... ............. ....... ...... ............. ...... ....... ...... ... 1-1 Introduc tion .......... ............. ............. ............. ............. ................... ............. ........ ...

  • Nortel CVX 600 - page 11

    296-10 11-202 Rel. 5.0, Doc. R ev. 02.0 1 xi Contents Installing t he CVX 600 Cha ssis ............ ............. ............. ............. ................... ............. . 1-1 8 Mounting Op tio ns . ....... ...... ....... ...... ....... ............. ...... ....... ............ ....... ...... ............. . 1 -18 Positio ning the Ch assis on ...

  • Nortel CVX 600 - page 12

    xii 296-10 11-202 Rel. 5.0 , Doc. Rev. 02 .01 Contents Connectin g Power t o the Chass is ........ ............. ............. ............. ................... ............. . 2-16 Before Y ou St art ... ............. ............. ............. ............. ................... ............. ............. . 2-16 Requirem ents .............. ..... ...

  • Nortel CVX 600 - page 13

    296-10 11-202 Rel. 5.0, Doc . Rev. 02.0 1 xiii Contents Checking th e LEDs .................. ............. ............. ............. ................... ............. ............. . 2-43 Introduc tion .......... ............. ............. ............. ............. ................... ............. ............. . 2-43 SCC-SM, SCC-RL TM (Ethe ...

  • Nortel CVX 600 - page 14

    xiv 296-10 11-202 Re l. 5.0, Doc. Rev . 02.01 Contents Replacin g a Power Module ............. ................... ............. ............. ............. ............. ....... 3 -40 Description ..... ............. ............. ............. ............. ............. ................... ............. ....... 3 -40 Removing the Power Module ... ...

  • Nortel CVX 600 - page 15

    296-10 11-202 Rel. 5.0, Doc. R ev. 02.0 1 xv Contents T ande m CVX to RA S CVX Crossove r Cable .................. ............. ............. ............. ...... A -14 Introduc tion .......... ............. ............. ............. ............. ................... ............. ............. A-1 4 T ool and Parts Neede d ............. ....... ...

  • Nortel CVX 600 - page 16

    ...

  • Nortel CVX 600 - page 17

    296-1 011-202 Rel . 5.0, Do c. Rev. 02.01 xv Preface About This Gui de Introduction This guide des cribes how t o insta ll the Nortel Networks CVX* 600 Multi- Servi ce Access Swi tch for T elco and Inte rnet ser vice provide r (ISP) cu stomers. Bec ause instal lation p rocedures vary betwe en T elco a nd I SP cus to mers, use th is manual a s a gui ...

  • Nortel CVX 600 - page 18

    Chapters and Appendixes in This Guide xvi 296-10 11-202 Re l. 5.0, Doc. Rev . 02.01 CVX 600 Ha rdware I nstallati on Gu ide Chapters and Appendixes in This Guid e This gui de contain s the fol lowing chap ters and appe ndixes: For Go to Chas sis I nstall ati on Chap ter 1 Chass is Connec tions Chapter 2 Repla cing CVX 600 Component s Chapte r 3 T e ...

  • Nortel CVX 600 - page 19

    Information About CVX P roducts 296-10 11-202 Rel. 5.0, Doc. R ev. 02.0 1 xvii Preface Information About CVX Product s About This Relea se This ver sion of th e CVX access s witch d ocumentation s upport s software deliver ed to customers u sing CVX Release 5 .0 soft ware. Accessing Rel ated Document ation For i nformatio n about gai ning acces s t ...

  • Nortel CVX 600 - page 20

    Customer Se rvices xviii 296-10 11-202 Re l. 5.0, Doc. Rev . 02.01 CVX 600 Ha rdware I nstallati on Gu ide Customer Services T echnical Support In the USA and Ca nada: If you are wit hin your wa rranty pe riod or ha ve purc hased a Per formance Pack su pport agr eement cover ing your CVX ne twork, dial 1- 800-758-48 27 to conta ct a T echnic al Sup ...

  • Nortel CVX 600 - page 21

    296-1 011-202 Rel . 5.0, Do c. Rev. 02.01 1- 1 Chapter 1 Chassis Installation Abo ut Thi s Ch apte r Introduction This chap ter de scribes how t o instal l the CVX 600 ch assis. T opics This chap ter c overs the following topic s: T opic Page CVX 600 Chassis Ov erv iew 1-2 Prepari ng the Site for the Instal lation 1-5 Mountin g the CV X 600 in a Ra ...

  • Nortel CVX 600 - page 22

    CVX 600 Cha ssis Over view 1-2 2 96-1 011- 20 2 Rel . 5. 0, D oc. Rev. 02. 01 CVX 600 Ha rdware I nstallati on Gu ide CVX 600 C hassis Over view Description The CVX 600 chassis h as 6 slots: 4 sl ot s are res erved for the modem ac cess card s (MACs) a nd digital access c ards (DACs), and 2 slot s are res erved for the syst em control cards (SCCs ) ...

  • Nortel CVX 600 - page 23

    CVX 600 Chassis Overview 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 1-3 Chas sis I ns tall ation Front View of CVX 600 Chassis The fo llowing f igure shows the front of the CVX 600 chassis. AC PM AC PM Fans 1 2 3 4 SEC PRI CVX-6oo BIP BIP PDU 2 PDU 1 ESD Jack O I O I Fans 1 2 3 4 CVX-6oo BIP BIP PDU 2 PDU 1 ESD Jack O I O I AC Chassis Option DC Chass ...

  • Nortel CVX 600 - page 24

    CVX 600 Cha ssis Over view 1-4 2 96-1 011- 20 2 Rel . 5. 0, D oc. Rev. 02. 01 CVX 600 Ha rdware I nstallati on Gu ide Rear View of CVX 600 Chassis The fo llowing f igure shows the rear of the CVX 600 c hassis. AC PM 1 AC PM 2 1 2 3 4 5 6 System Controller only 1 2 3 4 5 6 Main Chassis PDU 2 DC INPUT B DS3 E 1 x 12 DS1 x 12 Tx Rx 10/100 Enet HSSI Cl ...

  • Nortel CVX 600 - page 25

    Prepar ing the S ite for t he Insta llation 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 1-5 Chas sis I ns tall ation Prep ar ing the Site for the Inst allation Overview Before yo u instal l the CVX 6 00 chassis , you need to prepare y our site . Consider the method o f moun ting (rack or f lat s urfac e), t he ins tall ation of th e rack ( if used) , ...

  • Nortel CVX 600 - page 26

    Prepar ing the Site for the Inst allatio n 1-6 2 96-1 011- 20 2 Rel . 5. 0, D oc. Rev. 02. 01 CVX 600 Ha rdware I nstallati on Gu ide 7 ft T elco rack CVX-0220A AC PM AC PM Fans 1 2 3 4 5 6 CVX-6oo BIP BIP Filler S y stem Power G o o d Fail e d R ed u n Ethernet HSSI 1 3 2 1 Reset PCMCIA 1 2 System Power G o o d Fail e d Red u n Ethernet HSSI 1 3 2 ...

  • Nortel CVX 600 - page 27

    Mounting the CVX 600 in a Rack 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 1-7 Chas sis I ns tall ation Mounting the CVX 600 in a Rack Rack Cap acity Y ou can in stall up to seven AC- powered CVX 60 0s or up to ten DC-powere d CVX 600s i n a standa rd T elco or El ectroni c Industr ies Associ ation (E IA) rack. Rack Requirem ent s The ra ck must me et ...

  • Nortel CVX 600 - page 28

    Mounting the CVX 600 in a Rack 1-8 2 96-1 011- 20 2 Rel . 5. 0, D oc. Rev. 02. 01 CVX 600 Ha rdware I nstallati on Gu ide • Properl y ventila ted • W ell l ig hte d Ceiling Require ment s Consi der the fo llowing ce iling re quire ments befor e you inst all the rack: • The ce iling sho uld be cle ar of obst ructions su ch as be ams, heatin g ...

  • Nortel CVX 600 - page 29

    Mounting the CVX 600 in a Rack 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 1-9 Chas sis I ns tall ation Reference For P TE 2000 ra ck insta llation ins tructi ons, see th e PTE 2000 Inst allati on Guide (IM 07-08- 1543). Anchor Kit s Nortel Ne tworks of fers four t ypes of P TE 200 0 anchor ki ts; each kit conta ins two ancho rs. If you do not plan to ...

  • Nortel CVX 600 - page 30

    Mounting the CVX 600 in a Rack 1-10 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Sp ace Requirement s The fo llowing t able lists the P TE 2000 racks and dimensions. Flooring Requir ement s Y ou must anc hor the P TE 200 0 rack to t he equipment -room floor . The flo oring can be one of the fo llowin g types: • ...

  • Nortel CVX 600 - page 31

    Mounting the CVX 600 in a Rack 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 1-11 Chas sis I ns tall ation Access Consid erations The doo rways, corr idors, and eleva tors lea ding to the install ation si te must be able to accommoda te the ra ck. Consider the fol lowing when pl anning th e arriva l and unloa ding of th e P TE 2000 rack: • Includi ng ...

  • Nortel CVX 600 - page 32

    AC and DC Power 1-12 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide AC and DC Power Description The CVX 600 uses either an AC or DC power s ource. AC Power Option If you a re usi ng AC power f rom an out let, you sho uld be ins tall ing th e AC chas sis option. Th e AC chass is option con tains two independen t pow ...

  • Nortel CVX 600 - page 33

    AC and DC Power 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 1-13 Chas sis I ns tall ation DC Power Option If you ar e using an external AC powe r supply , you sh ould be ins talling th e DC chas sis optio n. The DC chass is option requires an exter nal -48 VDC power so urce. Note: Both vers ions conta in inter nal circui t breaker modules. Fans 1 2 3 ...

  • Nortel CVX 600 - page 34

    Prepar ing for t he CVX 600 I nstallation 1-14 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Prep ar ing for the CVX 600 Inst a llation Overview T o prepa re for the i nstalla tion of t he CVX 600 ch assis, make sure: • The sh ipment is comple te and unda maged. • Y ou have t he proper e quipment an d tools. ? ...

  • Nortel CVX 600 - page 35

    Pr epar ing f or t h e CVX 600 I nstal la tion 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 1-15 Chas sis I ns tall ation Checking the S hipment Careful ly inspec t the s hipment fo r comple teness, en suring th e items in the ship ping conta iner match those on t he packing list af fixed to t he shippin g contain er . In particul ar: • Confirm t hat ...

  • Nortel CVX 600 - page 36

    Prepar ing for t he CVX 600 I nstallation 1-16 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide T ools and Equipment Needed Before yo u instal l the CVX 600 chassis , ensure t hat you hav e all of the necess ary tools, c ables, con sole equi pment, and mount ing hardware. T ools Y ou must hav e the followi ng tools: ...

  • Nortel CVX 600 - page 37

    Pr epar ing f or t h e CVX 600 I nstal la tion 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 1-17 Chas sis I ns tall ation Mounting Hardware T o inst all t he CVX 600 chassis i n a rack , you need a Phill ips #2 s crewdri ver an d a computer rack t hat meets th e specif ication s listed in “ Rack Requir ements ” on page 1 -7 . If the rack does n ot ...

  • Nortel CVX 600 - page 38

    Installi ng the CVX 60 0 Chassis 1-18 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Inst alling the CVX 600 Chassi s Mounting Options Y ou can mount the CVX 600 in one of two way s: • Posit ion the ch assis on a flat, stur dy , horizonta l surfac e. • Mount the c hassis i n a rack. Positioning the C hassis on ...

  • Nortel CVX 600 - page 39

    Installin g the CV X 600 Chassi s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 1-19 Chas sis I ns tall ation Inst alling the Feet on the Bottom of the Chas sis T o in sta ll th e feet , fo ll ow thes e step s: St e p Action 1 Careful ly lay t he cha ssis on one side. 2 Using a Phillip s screwdrive r , attac h the feet to the f our holes in the bot tom ...

  • Nortel CVX 600 - page 40

    Installi ng the CVX 60 0 Chassis 1-20 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Mounting the Cha ssis in a Rack The mountin g flanges are prei nstalle d on the cha ssis. Caution : Nortel Network s recommends u sing a P TE 2000 r ack. Nortel Network s does not a uthorize the use of racks wit h front o r rear do ...

  • Nortel CVX 600 - page 41

    Installin g the CV X 600 Chassi s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 1-21 Chas sis I ns tall ation T elco and EIA Rack Hol e Sp acin g Y ou can use mounting f langes to install th e CVX 600 chassis i n a T elco or EIA rack . T elco and EIA r acks have 0.5-inch sp acing bet ween the dua l mounting hole s, and 0.625- inch spaci ng between the d ...

  • Nortel CVX 600 - page 42

    Installi ng the CVX 60 0 Chassis 1-22 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Hardware Need ed to Complete the Chassi s Inst allation T o complet e the cha ssis ins tallati on, you n eed the fo llowing ha rdware: • Four (fo r DC chassis option) or eight ( for AC chass is optio n) truss-he ad mounting s cre ...

  • Nortel CVX 600 - page 43

    Installin g the CV X 600 Chassi s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 1-23 Chas sis I ns tall ation Inst alling the Chassis T o in sta ll the cha ss is, fo llo w thes e st eps : St e p Action 1 Have someone help you lift the c hassis to the d esired in stall ation heig ht. 2 Move th e chass is up or d own to pr operly al ign the po sitions o n ...

  • Nortel CVX 600 - page 44

    Installi ng the CVX 60 0 Chassis 1-24 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide 3 Inser t t russ - he ad s cre ws t hrou gh ea ch flang e hol e a nd in to the c orre spo nding hole s on the f ront ve rtical su pports of the rack . 4 Use a Phi llips screwdriver to tighten th e screws. Caution: Y ou must tighte ...

  • Nortel CVX 600 - page 45

    296-1 011-202 Rel . 5.0, Do c. Rev. 02.01 2- 1 Chapter 2 Chassis Connections Abo ut Thi s Ch apte r Introduction This chap ter de scribes how to connec t network c abling an d optional console equipment to the CVX 600. T opics This chap ter c overs the following topic s: T opic Page Conne cting Alarm s 2-2 Conne cti ng Network Cab les 2-7 Conne cti ...

  • Nortel CVX 600 - page 46

    Connecting Alarms 2-2 2 96-1 011- 20 2 Rel . 5. 0, D oc. Rev. 02. 01 CVX 600 Ha rdware I nstallati on Gu ide Connecting Alarms Introduction The SCC-L TM and SCC-RL TM contain a termina l block that allows you to conne ct up t o thre e audib le al arms and three visua l alar ms. These alar ms al ert y ou to cri tica l, ma jor, and min o r co nditi o ...

  • Nortel CVX 600 - page 47

    Connecting Alarms 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 2-3 Chas sis Co nnectio ns Alarm T ypes The fo llowing t able lists specifi c alarm typ es, severi ty , and possi ble causes : Alarm T ype Severity Description T1 Ala rm Critic al An alarm conditio n has bee n detected on the specif ied T1 line, or th e signal on the T1 line ha s been lost. ...

  • Nortel CVX 600 - page 48

    Connecting Alarms 2-4 2 96-1 011- 20 2 Rel . 5. 0, D oc. Rev. 02. 01 CVX 600 Ha rdware I nstallati on Gu ide Sonet/SDH S T rac e Mis mat ch Minor The Secti on T race string i n the rece ived f rame does not matc h the con figured value i n the St raceS tringExpect att ribute. Sonet/SDH P T rac e Mis mat ch Minor The Pat h T rac e string in the rec ...

  • Nortel CVX 600 - page 49

    Connecting Alarms 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 2-5 Chas sis Co nnectio ns Reference For pi nout assi gnments, se e Appendix A, “ T echnical Spe cificatio ns. ” A TM PVPC PVCC Up Minor The PVPC/PVCC has been su ccessfully created. A TM PVPC PVCC Minor The PVPC/PVCC is down . A TM APS Switch over Min or A link fa ilure cau sed the PHY ...

  • Nortel CVX 600 - page 50

    Connecting Alarms 2-6 2 96-1 011- 20 2 Rel . 5. 0, D oc. Rev. 02. 01 CVX 600 Ha rdware I nstallati on Gu ide Procedure T o c onne ct al arm s to th e te rmin al bl ock , foll ow th ese st eps : St e p Action 1 Select th e termina ls you wan t to use fo r the audi ble or vis ual alarm. 2 Use a small flat-ti p screw driver to loo sen the tw o termina ...

  • Nortel CVX 600 - page 51

    Connecting Network Cables 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 2-7 Chas sis Co nnectio ns Connecting Network Ca bles Overview Y ou will n eed to att ach networ k cables t o the fol lowing CVX 6 00 interf aces: • 10/10 0BASE-T (on the SCC-L TM and SCC-RL TM) • DS1/T1 (RJ- 45/48C) • E1 (RJ-45/48C) • DS3 • HSSI • Optical (OC3/ STM1) Re ...

  • Nortel CVX 600 - page 52

    Connecting Network Cables 2-8 2 96-1 011- 20 2 Rel . 5. 0, D oc. Rev. 02. 01 CVX 600 Ha rdware I nstallati on Gu ide Connecting to 10 /100BASE-T Interfaces Each 1 0/100BASE-T int erface on t he SCC-RL TM supports one full-duple x conne ction. T o connec t an Ether net unshield ed twiste d pair (UTP) cable to a 10/ 100B ASE -T inte rfac e, foll ow t ...

  • Nortel CVX 600 - page 53

    Connecting Network Cables 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 2-9 Chas sis Co nnectio ns Connecting to DS 1/T1 Interfaces The DS1-DAC-L TM provides 12 or 24 cha nnelized T1 ports an d one port for connecti ng to an ex terna l clocking de vice. T o connec t T1 cables t o the T1 por ts, and to c onnect th e DS1-DAC-L TM to an ext er nal cloc kin ...

  • Nortel CVX 600 - page 54

    Connecting Network Cables 2-10 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Connecting to E1 Interfaces The E1-DAC-L TM provi des 12 or 2 4 E1 ports a nd one port for conne cting to a n exte rna l clo cki ng device. T o connect E1 cab le s t o t he E1 ports, a nd to conne ct th e E1-DAC-L TM to an ex ternal cloc ...

  • Nortel CVX 600 - page 55

    Connecting Network Cables 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-11 Chas sis Co nnectio ns Connecting to DS 3 Interfaces T o c onne ct to DS3 interf ace s, f ol low th is s tep : St e p Action 1 Plug the TX and RX coax ial cabl e connecto rs into t he appropr iate DS3 rec eptacles on t he SCC or DAC. Connect to the telephone network. CVX-0200A ...

  • Nortel CVX 600 - page 56

    Connecting Network Cables 2-12 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Connecting to the HSSI Interface The SCC-HSSI-RL TM cont ains on e HSSI 50- pin int erface r ecept acle. T o connect a HSS I ca b le, fo llo w this step : St e p Action 1 Plug t he cable connecto r into t he HSSI in terface rec eptac le. ...

  • Nortel CVX 600 - page 57

    Connecting Network Cables 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-13 Chas sis Co nnectio ns Connecting to the OC3/STM1 Interface The Optic al DAC-L TM contains t wo sets of optica l ports ( two primary and two redundan t, each wit h separat e Tx and Rx cha nnels), co nsisting of a total o f eight optic al c onne ctio ns. T he O pti cal SC C-II - ...

  • Nortel CVX 600 - page 58

    Connecting Network Cables 2-14 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Connecting an Optical Cabl e T o connec t an opti cal cable , follow t hese step s: St e p Action 1 Remov e the rubb er plugs f rom each pai r of por ts. STMx2 CVX-0139D Optical D A C-L TM A A A B A B B B Tx Rx Tx Rx Tx Rx Tx Rx 2 1 CLASS ...

  • Nortel CVX 600 - page 59

    Connecting Network Cables 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-15 Chas sis Co nnectio ns 2 Remov e the prot ective c overs from ea ch optic al conne ctor . 3 Orient th e the optic al cable conn ector so th at the ta b aligns wit h the slot in th e port, and push the cable co nnector in to the port. St e p Action CVX-0138B Remov e cov er . Rem ...

  • Nortel CVX 600 - page 60

    Connectin g Powe r to the Chas sis 2-16 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Connecting Power to the Chassis Before Y ou St art Make sure you ca n power the CVX 600 usi ng one of th e follo wing power s ourc es: • A customer -supplied DC power source wi th frame gr ounding (f or the DC chas sis optio n) ...

  • Nortel CVX 600 - page 61

    Connecting Power to the Chassi s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-17 Chas sis Co nnectio ns Grounding the Ch assis There ar e two ways to ground the CVX 600 chas sis: • Use th e NEBS-compliant dual-conne ctor post s. • Use th e compre ssion ter minal. Note: In additio n to th e grounding locatio n shown in the foll owing section s, th ...

  • Nortel CVX 600 - page 62

    Connectin g Powe r to the Chas sis 2-18 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Using the NEBS-Compliant Dual-Connect or Post s T o ground the CVX 600 chassi s us ing th e NEBS-complian t dual-co nnecto r po st s, fol lo w th e se st eps : Note: In additio n to th e grounding locatio n shown in the foll owin ...

  • Nortel CVX 600 - page 63

    Connecting Power to the Chassi s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-19 Chas sis Co nnectio ns Using the Compression T ermi nal T o ground the CVX 600 chassis u sing the c ompression terminal, follow the se step s: 5 Plac e the groun ding conn ectors over the post s, then s ecure the connect ors using a 1 1/32-inch nut driver to tighten the ...

  • Nortel CVX 600 - page 64

    Connectin g Powe r to the Chas sis 2-20 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide 3 Use a fla t-tip screwd river to lo osen the locking screw . 4 Use a wire strippe r to remov e approxima tely 1/2 i nch of in sulation from the groun d cable. 5 Inser t the strip ped end of the wire in to the compre ssion te rmi ...

  • Nortel CVX 600 - page 65

    Connecting Power to the Chassi s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-21 Chas sis Co nnectio ns Connecting to a Customer-Supplied DC Pow er Source The cu stomer -suppli ed DC power sou rce is onl y for the DC chassis o ption. Prerequisit es Before c onnecting the CVX 600 t o a DC power sourc e, see “ DC Power Supp ly W arn ings ” on page ...

  • Nortel CVX 600 - page 66

    Connectin g Powe r to the Chas sis 2-22 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Connecting t o a DC Power Sour ce T o c onne ct to the powe r so ur ce, fol lo w th e se s teps : St e p Action 1 Make s ure the po wer switches on the PDU s are of f. 2 Remov e the cl ear cover by removing the three s crews on t ...

  • Nortel CVX 600 - page 67

    Connecting Power to the Chassi s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-23 Chas sis Co nnectio ns 4 Place th e lugs of the wires o ver the post s. Mak e sure that the lugs for the black wires are on the po sts l abeled “ RETURN ” on the rai sed brac kets, and that t he lugs f or the red wire s are on t he post s label ed “ -48V ” on the ...

  • Nortel CVX 600 - page 68

    Connectin g Powe r to the Chas sis 2-24 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Next Step T o apply power , see “ Applying Power to the CVX 600 ” on page 2-4 2 . 7 Inst all the clear pl astic pro tective c over , secu ring the c over wit h three sc rews. T ighten the s crews to 6 in-lb. 8 Connect the -48 ...

  • Nortel CVX 600 - page 69

    Connecting Power to the Chassi s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-25 Chas sis Co nnectio ns Connecting Chas sis to an AC Power Sourc e The AC power s ource is o nly for t he AC chassis opt ion. Connecting t he Power Cords T o c onn e ct th e po wer c ord s to the c h assi s, f o llow th ese s te ps: St e p Action 1 Make s ure tha t the tw ...

  • Nortel CVX 600 - page 70

    Connectin g Powe r to the Chas sis 2-26 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Next S tep T o apply power , see “ Applying Power to the CVX 600 ” on page 2-4 2 . 2 Ins ert the p ower cords int o the r ece ptacl e s lab ele d “ AC PM2 ” and “ AC PM1. ” 3 Insert th e other ends of th e power cord ...

  • Nortel CVX 600 - page 71

    Routing the Cables 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-27 Chas sis Co nnectio ns Routing the Cable s Cable Mount s The CVX 600 chassis i ncludes pl astic c able mounts that you c an use to po sition the cabl es, using cable ti es (not su pplied), aro und the cha ssis. These mounts help to en sure that t he cables at the bac k of th e chassis ...

  • Nortel CVX 600 - page 72

    Routing the Cables 2-28 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Routing Fiber Op tic Cables Intr oduction The r out ing of fi ber o pti c c abl es requi re s d if ferent co nsi der ation s t han th e routin g of wi re ca ble s, due t o th e de lic ate mate rial of th e tr ansm issi o n lin e. Minimum Radius ...

  • Nortel CVX 600 - page 73

    Installing and Removi ng the F lash Memory Cards 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-29 Chas sis Co nnectio ns Inst alling an d Removing the Flash Memory Cards Description The S CC- SM conta ins dua l PCM CIA slo ts f or th e flas h mem or y ca rd . The fla sh memory card provid es storage f or the CVX 600 nonvolatil e file system (NVFS), op ...

  • Nortel CVX 600 - page 74

    Installing and Removing the Flash Memory Cards 2-30 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Inserting a Flas h Memory Card T o inse rt a fla sh memory card , follow th ese steps : St e p Action 1 Posi tion the c ard so tha t its label i s facing up. 2 Inse rt the card into slot 1 and gen tly pu sh the ca rd ...

  • Nortel CVX 600 - page 75

    Installing and Removi ng the F lash Memory Cards 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-31 Chas sis Co nnectio ns Removing a Fla sh Memory Card T o remove a flash memory ca rd, foll ow these st eps: St e p Action 1 Press the ejec t button ne xt to the s lot (label ed 1 or 2) f rom whi ch you wan t to remo ve a flas h memory ca rd. 2 Pull the fl ...

  • Nortel CVX 600 - page 76

    Connecting Equip ment to the Console Port 2-32 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Connecting Equipment to t he Console Port Introduction Y ou can con nect a te rminal, PC, modem, or termina l server to the CVX 600, u sing the cons ole port o n the SCC. The fo llowing pr ocedures p rovide st eps for c on ...

  • Nortel CVX 600 - page 77

    Connecting Equipment t o the Console Port 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-33 Chas sis Co nnectio ns Connecting a T erminal T o connec t a terminal to the CVX 1800 using the DB-9 to DB-9 ca ble, foll ow thes e steps: St e p Action 1 T urn on the termi nal, then config ure it usi ng the p arameters listed bel ow . Reference: For in structi ...

  • Nortel CVX 600 - page 78

    Connecting Equip ment to the Console Port 2-34 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide 3 Att ac h the 9-pin recept ac le end of the conso le ca ble to the conso le port . 4 Att ach the 9- pin plug e nd of t he console cable to t he DB- 9 port on th e bac k of t he t e rm in al. St e p Action AC PM 1 AC PM 2 ...

  • Nortel CVX 600 - page 79

    Connecting Equipment t o the Console Port 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-35 Chas sis Co nnectio ns Connecting a PC T o connec t a PC to the CVX 600 using t he DB-9 to DB-9 ca ble, foll ow these step s: St e p Action 1 Att ac h the 9-pin recept acle end of the console cable to the Cons ol e port. (continue d) AC PM 1 AC PM 2 1 2 3 4 5 6 ...

  • Nortel CVX 600 - page 80

    Connecting Equip ment to the Console Port 2-36 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide 2 Conne ct the 9-pin plug end of the console cable to the DB-9 p ort on t he back of th e PC. St e p Action CVX-0120B DB-9 to DB-9 console cable DB-9 port on PC ...

  • Nortel CVX 600 - page 81

    Connecting Equipment t o the Console Port 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-37 Chas sis Co nnectio ns Connecting a Mo dem If yo u nee d remo te d ial- in acc ess to the c omm a nd l in e in terf a ce (C L I), y ou c an connect a modem (A T or Hayes compat ible) t o the CVX 60 0 using the DB-9 to DB-25 modem cabl e. T o connec t a modem to ...

  • Nortel CVX 600 - page 82

    Connecting Equip ment to the Console Port 2-38 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide 4 Att ach the 9-pin rec ept acle end of the modem cabl e to the c onsol e port. 5 Att ach the 25 -pin plug end of the mode m cable t o the mod em ’ s DB-25 RS-232 d ata commun ications po rt. Note: If y ou nee d re m ote ...

  • Nortel CVX 600 - page 83

    Connecting Equipment t o the Console Port 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-39 Chas sis Co nnectio ns Connecting a T erminal Server A termin al server provides remote acce ss to multiple CVX switch es through se rial ports c onnected t o the conso le port of the SCC-RL TMs. A termina l server al so allows t he addres sing of both SCCs when ...

  • Nortel CVX 600 - page 84

    Connecting Equip ment to the Console Port 2-40 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Rear Connections for Sample Hardware Arr angement Recommendations T erminal server use is also reco mmended in the foll owing cases : • Where the C VX ch a ssis is in a re mote locat ion • When Eth ernet access is rest ...

  • Nortel CVX 600 - page 85

    Connecting Equipment to a Local Ethe r net Port 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-41 Chas sis Co nnectio ns Connecting Equipment to a Local Ethernet Por t Description The 10/100 Mb/s Ethe rnet port on the SCC-L TM and SCC-RL TM allows you t o connect a remote PC or similar device to the CVX 600 using an Ether net hub. Connec ting to a remo ...

  • Nortel CVX 600 - page 86

    Applying P ower t o the CVX 600 2-42 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Applying Power to the CVX 600 Procedure T o apply power to th e CVX 600, foll ow these st eps: St e p Action 1 Ensur e th at y ou hav e c on nec ted al l po w er c abl es to t he a pp ropri ate term in als . 2 Ensur e that yo u have ...

  • Nortel CVX 600 - page 87

    Checking the LED s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-43 Chas sis Co nnectio ns Checking the LED s Introduction The LEDs provi de importa nt infor ma ti on a bout th e ope rating st at us of the s ystem control and ac cess card s. These inc lude the f ollowing c ards: • SCC-SM, SCC-RL TM (Ethern et 10/100 Mb/s p orts) • SCC-HSSI-SM, SCC ...

  • Nortel CVX 600 - page 88

    Checking the LEDs 2-44 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide SCC-SM, SCC-RL TM (Ethern et 10/100 Mb/s ports) The foll owing figur e shows the LEDs on the SCC-SM a nd SCC-RL TM. Note: The number of Et hernet co nnectors a nd Ethernet LEDs may vary from wh at is sho wn, depe nding on the model of L TM you ha ...

  • Nortel CVX 600 - page 89

    Checking the LED s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-45 Chas sis Co nnectio ns LEDs on the SCC-SM The fo llowing t able describ es the LEDs on the SCC- SM: LEDs on the SCC-RL TM The fo llowing t able describ es the LEDs o n the SCC- RL TM: LED St a te Meaning Pwr Off On (green ) Power of f Power on Good On (green ) Off Flashin g green Succ ...

  • Nortel CVX 600 - page 90

    Checking the LEDs 2-46 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide SCC-HSSI-SM, S CC-HSSI-RL TM The fo llowing figur e shows the LEDs on the SCC- HSSI-SM and SCC-HSSI-RL TM: SCC-RL TM SCC-SM CVX-0210B HSSI 2 RX Link 10/100 Enet 1 RX Link 10/100 Enet 3 RX Link 10/100 Enet Visual Alarms Audible Crit Ret Maj Ret Mi ...

  • Nortel CVX 600 - page 91

    Checking the LED s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-47 Chas sis Co nnectio ns LEDs on the SCC-HSSI-SM The fo llowing t able descr ibes the LEDs on the SCC- HSSI-SM: LEDs on the SCC-HSSI-RL TM The fo llowing t able describ es the LEDs o n the SCC- HSSI-RL TM: LED St a te Meaning Pwr Off On (green ) Power of f Power on Good On (green ) Off ...

  • Nortel CVX 600 - page 92

    Checking the LEDs 2-48 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Optical SCC-II The fo llowing f igure shows the LEDs on t he Optical SCC-II-SM and the Opti cal SCC-II-L TM: Optical SCC-II-L TM CVX-0143D Optical SCC-II-SM Visual Alarms Audib le Crit Ret Maj Min Ret Ret Crit Ret Maj Min Ret Ret Link RX Link RX ...

  • Nortel CVX 600 - page 93

    Checking the LED s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-49 Chas sis Co nnectio ns LEDs on the Optical SCC-II-SM The f ollo wi ng tab le des cri bes th e LE D s on t he O p tica l SCC -II -SM : LED Sta t e Meanin g Power Off Power off On (green) Power on Good On (green) Succes s ful sy ste m boo t: no errors detected Of f No power: f ailure de ...

  • Nortel CVX 600 - page 94

    Checking the LEDs 2-50 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide LEDs on the Optical SCC-II-L TM The f ollo wi ng tab le des cri bes th e LE D s on t he O p tica l SCC -II -L TM: LED Sta t e Meanin g Link Of f No link present On (green) Link pres ent Rx Of f Not rece iving dat a Flashi ng green R ece iv ing da ...

  • Nortel CVX 600 - page 95

    Checking the LED s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-51 Chas sis Co nnectio ns Optical DAC The fo llowing figur e shows the LEDs on the Opt ical DAC-SM: LEDs on the Optical DAC-SM The fo llowing t able describ es the LEDs o n the Opt ical DAC-SM: LED Sta t e Meanin g Power Off Power off On (green) Power on Good On (green) Succes s ful sy s ...

  • Nortel CVX 600 - page 96

    Checking the LEDs 2-52 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide DAC-SM LEDs The foll owi ng f ig ure s hows the LEDs on the DS1- DAC-SMs, E1 -DAC-SMs, an d DS3-DAC-SMs: CVX-0247B DA C DS1x24 Pwr Good Fail Redun YEL RED YEL RED 3 1 10 11 24 2 12 22 23 21 19 20 18 16 17 15 13 14 9 7 8 6 4 5 DA C E1x24 Pwr Good ...

  • Nortel CVX 600 - page 97

    Checking the LED s 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 2-53 Chas sis Co nnectio ns LEDs on DAC-SM The foll owi ng t ab le descr ibe s t he LEDs on the DS1-DAC- SM, E1- D AC-SM, an d DS3-DAC-SM: LED St a te Meaning Pwr Off On (green ) Power of f Power on Good On (green ) Off Succ essful sys tem boot: no error s detected No powe r: failu re dete ...

  • Nortel CVX 600 - page 98

    Checking the LEDs 2-54 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide MAC-SM LEDs The fo llowing figur e shows the LEDs on the MAC-SM: LEDs on the MAC-SM The fo llowing t able descr ibes the LEDs on the MAC-SM : Reference For i nformatio n about cre ating and editing t he syste m configura tion at b oot time, see t ...

  • Nortel CVX 600 - page 99

    296-1 011-202 Rel . 5.0, Do c. Rev. 02.01 3- 1 Chapter 3 Replacing CVX 600 Components Abo ut Thi s Ch apte r Introduction This chap ter de scribes how t o replace and CVX 6 00 hardware components. T opics This chapter c overs the following topic s: T opic Page Att aching the An tistat ic W rist S trap 3-2 Repla cing Mod ules and Filler Panels 3-4 R ...

  • Nortel CVX 600 - page 100

    Attaching the Antist atic Wr ist Strap 3-2 2 96-1 011- 20 2 Rel . 5. 0, D oc. Rev. 02. 01 CVX 600 Ha rdware I nstallati on Gu ide Att aching the Antist atic W r ist S trap Location of Wrist S trap The a ntis tat ic wri st st rap is loca ted in th e acc essor y ki t. Purpose of Wrist S trap The an tistat ic wrist st rap dire cts th e dischar ge of s ...

  • Nortel CVX 600 - page 101

    Attaching the Antist atic Wr ist Strap 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 3-3 Replac ing CVX 600 Compon ents 3 Plac e the strap aro und yo ur wrist, then a djust it to ensu re that the metal buckle insi de the stra p touches your sk in. 4 Plug the jac k at the other en d of the cable into the fron t or rear of the chassi s, depe nding on wh i ...

  • Nortel CVX 600 - page 102

    Replacing Modules and Filler Panels 3-4 2 96-1 011- 20 2 Rel . 5. 0, D oc. Rev. 02. 01 CVX 600 Ha rdware I nstallati on Gu ide Replacing Modul es and Filler Panels Introduction This sect ion provide s instr ucti ons for r eplaci ng chass is compone nts and ha rdwa re module s. It descri bes how to: • Rem ove an d in sta ll fill er pa nel s • Re ...

  • Nortel CVX 600 - page 103

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 3-5 Replac ing CVX 600 Compon ents Removing a Rear Filler Panel T o remove a rear fi ller panel , foll ow these st eps: St e p Action 1 Use a 1/4-inch flat-tip sc rewdriv er to loose n the sc rews on t he left an d right sides of the p anel. 2 Remov e the fil ler p an el. ...

  • Nortel CVX 600 - page 104

    Replacing Modules and Filler Panels 3-6 2 96-1 011- 20 2 Rel . 5. 0, D oc. Rev. 02. 01 CVX 600 Ha rdware I nstallati on Gu ide Inst alling a Rear Filler Panel T o inst all a re ar fill er panel, follow these st eps: Note: SC C fi ll ers m ust b e us ed f o r slo t 5 or 6, adjacen t to a si ngle SCC- L TM. All o ther s lots u se a M AC/D AC fi ller ...

  • Nortel CVX 600 - page 105

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 3-7 Replac ing CVX 600 Compon ents Removing a Front Filler Panel T o re mov e a fr ont fi ller pan e l, fo l low these ste ps: St e p Action 1 Using a flat-tip screwdr iver , turn t he screw a t the upper left co rner of the filler p anel 1/4 tu rn counte rclockwis e. 2 Gr ...

  • Nortel CVX 600 - page 106

    Replacing Modules and Filler Panels 3-8 2 96-1 011- 20 2 Rel . 5. 0, D oc. Rev. 02. 01 CVX 600 Ha rdware I nstallati on Gu ide Inst alling a Front Filler Panel T o inst all a fr ont fill er panel , follow th ese steps : Note: Filler pan els fo r slots 1 to 4 are ma rked, “ Fille r , ” and f iller panels for s lots 5 and 6 are marke d, “ Syste ...

  • Nortel CVX 600 - page 107

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 3-9 Replac ing CVX 600 Compon ents 2 Ensur e that the e jectors a re extende d at an an gle, bu t not all of the way . Caution: Extending the ej ectors a ll of th e way may resu lt in ej ector breakage when attempt ing to cl ose them in step 4. (continue d) St e p Action C ...

  • Nortel CVX 600 - page 108

    Replacing Modules and Filler Panels 3-10 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide 3 Ensur e that th e latch p awl is in the c ard gui de cha nnel an d slid e the p anel into the cha ssis unt il it s conne ctor touc hes the c hassis mid-plane . 4 Gently push the eject or levers inward. The right le ver will c ...

  • Nortel CVX 600 - page 109

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-11 Replac ing CVX 600 Compon ents Replacing the S CC-SM In a red undant c onfigura tion, when you re place th e primary SCC- SM, the seco ndary SCC-SM aut omatically co pies the system soft ware and co nfigurat ion file s f rom i ts fl ash mem ory ca rd. B efo re rep lac ...

  • Nortel CVX 600 - page 110

    Replacing Modules and Filler Panels 3-12 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Removing the SCC- SM T o re mov e th e SCC -SM , fol low th ese ste ps: St e p Action 1 Remov e the fla sh memo ry card from th e PCMCIA s lot by pre ssing the ej ect butto n located next to th e slot. 2 Using a flat-tip screwdr ...

  • Nortel CVX 600 - page 111

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-13 Replac ing CVX 600 Compon ents 3 Grasp t he left and right eje ctor leve rs and pul l them ou tward to e ject the SCC-SM. Y ou will fe el the SCC -SM disco nnect from the chassi s mi d-plane and the SCC-L TM or SCC-RL TM. 4 Grasp t he ejecto r levers a nd car efully s ...

  • Nortel CVX 600 - page 112

    Replacing Modules and Filler Panels 3-14 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Inst alling an SCC-SM T o in sta ll an S CC- SM , foll ow th ese st eps : St e p Action 1 Make su re that the locki ng scr ew is in the unloc ked pos ition (slot is horizo ntal ). 2 Ensur e that the e jectors a re extende d at a ...

  • Nortel CVX 600 - page 113

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-15 Replac ing CVX 600 Compon ents 3 Ensur e that the l atch p awl is in the ca rd guide c hanne l and slide the mo dule into the chas sis until its c onnector touches t he cha ssis mid-p lane. 4 Push the le ve rs i nw ard to ful ly en gag e the loc ki ng me ch ani sm . T ...

  • Nortel CVX 600 - page 114

    Replacing Modules and Filler Panels 3-16 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Reference For i nformatio n about the SCC-SM LEDs, see the “ Check ing the LEDs ” on page 2 -43 . Replacing the S CC-L TM/RL TM If you ne ed to replac e the SCC-L TM or SCC-RL TM, note the c onfigurati on of instal led net w ...

  • Nortel CVX 600 - page 115

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-17 Replac ing CVX 600 Compon ents 3 Using a 1/16-in ch flat-tip screwd river , loosen the lock ing screw s. (continue d) St e p Action CVX-0154B 3 4 5 6 System Controller only 1 2 3 4 Main Chassis DS3 E 1 x 12 DS1 x 12 Clock Clock 12 11 10 9 8 7 12 11 10 9 6 5 4 8 7 6 5 ...

  • Nortel CVX 600 - page 116

    Replacing Modules and Filler Panels 3-18 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide 4 Grasp t he left and right eje ctor leve rs and pul l them ou tward to e ject the SCC-L TM/RL TM. Y ou will feel the mo dule discon nect from the SCC-SM. 5 Grasp t he ejecto r levers a nd car efully sl ide the m odule out of th ...

  • Nortel CVX 600 - page 117

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-19 Replac ing CVX 600 Compon ents Inst alling an SCC-L TM o r SCC-RL TM T o in stall an S CC- L T M or SC C -R L T M , foll o w the se st eps : St e p Action 1 Make s ure the po wer switches on the PDU s are both off. 2 Holdi ng the SC C-L TM/RL TM, use the guides t o al ...

  • Nortel CVX 600 - page 118

    Replacing Modules and Filler Panels 3-20 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Reference For i nformatio n about the SCC-L TM and SCC-RL TM LEDs, see “ Checking t he LEDs ” on page 2-43 . 5 Use a 1/16-inch flat-tip sc rewdriver to ti ghten the f our locki ng screws on the front of th e SCC-L TM/RL TM. ...

  • Nortel CVX 600 - page 119

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-21 Replac ing CVX 600 Compon ents Replacing Othe r Service Modules The MACs and DAC-SMs provide the processi ng capabil ities for the rear -installed L TM s. When you remove an online service mod ule, the CVX 600 redire cts proce ssing to a n adjacen t secondar y module ...

  • Nortel CVX 600 - page 120

    Replacing Modules and Filler Panels 3-22 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Removing a Service Module T o remove a MAC or DAC-SM, follow these steps: St e p Action 1 Using a 1/4-inch fl at-tip sc rewdriver , turn the loc king scr ew in the up per lef t corner of the fille r panel 1/4 turn c ountercloc k ...

  • Nortel CVX 600 - page 121

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-23 Replac ing CVX 600 Compon ents 3 Grasp t he ejecto r levers a nd car efully sl ide the m odule out of the chassis. St e p Action AC PM AC PM Fans 1 2 3 4 5 6 CVX-6oo BIP BIP System Power Good Failed Redun Ethernet HSSI 1 3 2 1 Reset PCMCIA 12 System Power Good Failed ...

  • Nortel CVX 600 - page 122

    Replacing Modules and Filler Panels 3-24 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Inst alling a Service Module T o instal l a MAC or DAC-SM, fol low these ste ps: St e p Action 1 Make s ure that th e lockin g screw is in the un locked pos ition (slo t horizont al). 2 Ensur e that the e jectors a re extende d ...

  • Nortel CVX 600 - page 123

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-25 Replac ing CVX 600 Compon ents Reference For i nformatio n about the LEDs, see “ Checking the LE Ds ” on pag e 2-43 . 3 Ensur e that the l atch p awl is in the ca rd guide c hanne l and slide the mo dule into the chas sis until its c onnector touches t he cha ssis ...

  • Nortel CVX 600 - page 124

    Replacing Modules and Filler Panels 3-26 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Replacing the D AC-L TM/-RL TM If you ne ed to replac e an L TM or RL TM, no te the con figuration of insta lled network c abling bef ore you di sconnect a ny cables . Y ou will need to r einstal l this cabling on the replacemen ...

  • Nortel CVX 600 - page 125

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-27 Replac ing CVX 600 Compon ents Removing a DAC-L TM or DAC-RL TM T o remove a DAC-L TM or DAC-RL TM, fo llow these st eps: St e p Action 1 Disc onnect an y cables at tached to the L TM or RL TM. 2 Use a fla t-tip screwd river to loos en the loc king screws . (continue ...

  • Nortel CVX 600 - page 126

    Replacing Modules and Filler Panels 3-28 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide 3 Grasp t he left and right eje ctor leve rs and pul l them ou tward to e ject the L TM or RL T M. 4 Grasp t he ejecto r levers a nd car efully sl ide the m odule out of the chassis. 5 Plac e the modu le in an antist atic bag o ...

  • Nortel CVX 600 - page 127

    Replacing Modules and Filler Panels 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-29 Replac ing CVX 600 Compon ents Inst alling a DAC-L TM or DAC-RL TM T o instal l a DAC-L TM or DAC-RL TM, follow these steps: St e p Action 1 Holdi ng the mo dule, u se the gu ides to al ign the s ides of th e module with the app ropr iat e s lot. 2 Grasp t he left and ...

  • Nortel CVX 600 - page 128

    Replacing Modules and Filler Panels 3-30 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Reference For mor e informat ion about the DS1, E1, and DS3 LEDs, see “ Checking the LEDs ” on page 2-43 . 4 Use a flat-tip s crewdriver t o tighten t he two lock ing scre ws on the fr ont of the LT M o r R LT M . 5 Reatt ac ...

  • Nortel CVX 600 - page 129

    Replacing the Fan Module 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-31 Replac ing CVX 600 Compon ents Replacing the Fan Module Description The CVX 600 fan module c ontains t wo fans and i s locate d on the le ft side of the cha ssis. Caution : A malfunctioni ng fan modul e can cause the en tire cha ssis to overheat . This condi tion can lead to sy ...

  • Nortel CVX 600 - page 130

    Replacing the Fan Module 3-32 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Removing the Fa n Module T o remove the fan module, follo w the se ste ps: St e p Action 1 Using a flat-tip screwdr iver , turn t he two lock ing scre ws 1/4 turn counterc lockwis e to unloc k. AC PM AC PM CVX-6oo BIP BIP AC PM 1 AC PM 2 P ...

  • Nortel CVX 600 - page 131

    Replacing the Fan Module 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-33 Replac ing CVX 600 Compon ents St e p Action 2 Grasp t he fan module b y the hand le and pu ll firmly until yo u feel the fan module disconn ect from t he chass is. W arning: Th e fans will spin for a sho rt time as you slid e the fan mod ule out of the cha ssis. Be c areful no ...

  • Nortel CVX 600 - page 132

    Replacing the Fan Module 3-34 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Inst alling a Fan Module T o inst all a fa n module, follo w these s teps: St e p Action 1 Make s ure tha t the l ockin g scr ews are in the unloc ked po sitio n (slo t is v ertical ). CVX-0168A Fans Fans Loc ked Unloc ked ...

  • Nortel CVX 600 - page 133

    Replacing the Fan Module 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-35 Replac ing CVX 600 Compon ents 2 Slide the replac ement fa n module into the c hassis until you feel the m odule touch th e fan con nector in the chass is. 3 Firml y push o n the f an module ’ s fron t pane l unt il yo u feel the modu le c on nec t to th e fan co nnector . The ...

  • Nortel CVX 600 - page 134

    Replacing a PDU Module 3-36 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Replacing a PDU Module Description The CVX 600 contains two PDU (circuit breaker) modules, whi ch are loc ated near th e top ce nter of t he front of the cha ssis. Removing the P DU Module T o remove the PDU module, fol low these ste ps: St ...

  • Nortel CVX 600 - page 135

    Replacing a PDU Module 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-37 Replac ing CVX 600 Compon ents 3 Grasp t he PDU module b y the hand le and pu ll firmly until yo u feel it disc onnect f rom the ch assi s. 4 Slide the PDU modu le out of the cha ssis. St e p Action AC PM AC PM Fans 1 2 3 4 5 6 CVX-6oo BIP Filler AC PM 1 AC PM 2 PDU 2 PDU 1 ESD Ja ...

  • Nortel CVX 600 - page 136

    Replacing a PDU Module 3-38 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Inst alling a PDU Module T o in sta ll a PD U mod ule , foll ow th ese st eps : St e p Action 1 Make su re that the locki ng scr ew is in the unloc ked pos ition (slot is horizo ntal ). 2 Slide the replac ement modu le int o the chas sis unt ...

  • Nortel CVX 600 - page 137

    Replacing a PDU Module 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-39 Replac ing CVX 600 Compon ents 4 Using a flat-tip screwdr iver , turn t he locki ng screw 1 /4 turn clo ckwise. 5 V erify th at the red L ED is on. 6 Switch the PDU on , and veri fy that the green L ED come s on. St e p Action AC PM AC PM Fans 1 2 3 4 5 6 CVX-6oo BIP AC PM 1 AC PM ...

  • Nortel CVX 600 - page 138

    Replacing a Power Module 3-40 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Replacing a Power M odule Description If equi pped with t he AC module, th e CVX 600 cont ains two rep laceable power module s, which are lo cated in t he top center of t he front o f the chas sis. Removing the P ower Module T o remove a p ...

  • Nortel CVX 600 - page 139

    Replacing a Power Modu le 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-41 Replac ing CVX 600 Compon ents 2 Grasp t he power module b y the han dle an d pull firm ly until you feel it disc onnect f rom the ch assi s. 3 Slide the power m odule out of the chassis . St e p Action AC PM Fans 1 2 3 4 5 6 CVX-6oo BIP BIP Power Good Failed Redun Ethernet HSS ...

  • Nortel CVX 600 - page 140

    Replacing a Power Module 3-42 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Inst alling a Power Modul e T o inst all a power modul e, follo w these steps: St e p Action 1 Make s ure that th e lockin g screws a re in the u nlocked position (slot s are vertical). 2 Slide the replac ement modu le int o the chas sis u ...

  • Nortel CVX 600 - page 141

    Replacing a Power Modu le 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 3-43 Replac ing CVX 600 Compon ents 4 Using a flat-tip screwdr iver , turn t he locking screws 1/4 turn c lockwise . 5 V erify th at the LED is on. St e p Action AC PM AC PM Fans 1 2 3 4 5 6 CVX-6oo BIP BIP Power Good Failed Redun Ethernet HSSI 1 3 2 1 Power Good Failed Redun Ethern ...

  • Nortel CVX 600 - page 142

    Ordering Replaceme nt Components 3-44 296-10 11-202 Rel. 5.0 , Doc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Ord ering R eplac ement Comp onent s How to Order If nece ssary , you c an order CVX 600 replace ment component s from Nort el Networks. S ee “ Customer Services ” on page xviii for informa tion about contact ing Nortel Net wor ...

  • Nortel CVX 600 - page 143

    296-1 011-202 Rel . 5.0, Do c. Rev. 02. 01 A-1 Appendix A T echnical Specifications About Thi s Ap pend ix Introduction This appe ndix provi des the t echnical specifi cations f or the CVX 600. T opics This appe ndix cover s the fol lowing topi cs: T opic Page Chassis Specific ations and C learances A-2 Envi ronment al Specific ations A-3 Cooli ng ...

  • Nortel CVX 600 - page 144

    Chassis S pecific ations a nd Clearan ces A-2 296-10 11-202 Rel. 5.0 , D oc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Chassis Specifica tions and Clearances Dimens ions, Weight, Slot Cap aci ty The fo llowing t able lists the dimensi ons, weight , and slot capacity of the CVX 6 00 c h assi s: Clearance The ch assis must have enough cleara ...

  • Nortel CVX 600 - page 145

    Environ mental S pecific ations 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 A-3 T echnica l Specific ations Envi ronmen t al Specifi cations Specifications The fo llowing t able lists the env ironmental specifi cations for the CVX 600: Attribute Meas urement Operati ng tem pera ture 23 ° to 10 4 ° F (-5 ° to 40 ° C) * stable * -5 ° C is for short ...

  • Nortel CVX 600 - page 146

    Cooling Requirements A-4 296-10 11-202 Rel. 5.0 , D oc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Cooling Requ irement s Need for V entila tion The CVX 600 is a high p erformance access s witch, that pr oduces a s ignifica nt amount of heat. Pr oviding su ffici ent cooli ng ventil ation is very impor tant when instal ling the equipmen t. M ...

  • Nortel CVX 600 - page 147

    Electromagnetic Emissions and Radio Freque ncy 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 A-5 T echnica l Specific ations Electr omagne tic Emissi ons and Radio Frequ ency CVX 600 Requi rement s The CVX 600 meets the f ollowing r equirements f or elect romagneti c emission s and radi o frequenc y: • FCC Part 15, Subpart B • EN 55022: 199 4/A1:19 ...

  • Nortel CVX 600 - page 148

    Cable Sp ecificatio ns A-6 296-10 11-202 Rel. 5.0 , D oc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide Cable Specifications Cables Supplie d by Nortel Networks The CVX 600 includes the foll owing cable s: • 15 ft DB-9 to DB-9 s erial cross over cabl e (null- modem cable) to connect the CVX 600 DB-9 RS- 232 co nsol e po rt to a DB-9 RS-2 32 ...

  • Nortel CVX 600 - page 149

    Cable S pecificat ions 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 A-7 T echnica l Specific ations Management Co nsole Cable Specification s The SCC-RL TM has a s ingle cons ole inte rface. The interfa ce uses a DB- 9 plug connecto r that pr ovides an RS-232 se rial connect ion. The CVX 600 c onsole por t allows you to co nnect to any VT100- compatib ...

  • Nortel CVX 600 - page 150

    Cable Sp ecificatio ns A-8 296-10 11-202 Rel. 5.0 , D oc. Rev. 02.01 CVX 600 Ha rdware I nstallati on Gu ide DB-9 to DB- 25 Pin and Signal Assignment s The fo llowing t able lists the pin an d signal a ssignments for the DB- 9 to DB-25 conso le inter face conne ctor: Pin on DB-9 Conn ector Signal Name Pin on DB-25 Connector 1 DCD (data carrier dete ...

  • Nortel CVX 600 - page 151

    Cable S pecificat ions 296-1011-2 02 Rel. 5.0, Doc. Rev . 02.01 A-9 T echnica l Specific ations HSSI Interface The fo llowing f igure shows the HSSI connect or: HSSI DTE to DCE Pin and Signal Assignment s The fo llowing ta ble lists t he pin and signal ass ignments f or the HSSI DTE t o DCE inter face cable : Nortel Networks T ermination Remote T e ...

  • Nortel CVX 600 - page 152

    Cable Sp ecificatio ns A-10 296-10 11-202 Rel. 5.0 , D oc. Rev. 02 .01 CVX 600 Ha rdware I nstallati on Gu ide Pin Signal Pin Signal 8 DTE Ava il abl e+ 8 DTE Ava il abl e+ 33 DTE Ava il abl e- 33 DTE Ava il abl e- 9 T erminal T Iming+ 9 T ermina l TIming+ 34 T e rmi nal TIm ing - 34 T ermi nal TIm ing - 35 Loop bac k CKT A- 3 5 Loop back CKT A- 1 ...

  • Nortel CVX 600 - page 153

    Cable S pecificat ions 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 A-11 T echnica l Specific ations Ethernet 10/10 0BASE-TX Interface Cable Specifications The Ether net 10/100 BASE-TX inte rfaces p rovide unshie lded twist ed pair ( UTP) support . The fo llowing f igure shows the Ethernet 10/100BASE-TX i nterface connector : Ethernet 10 /100BASE-TX Pi ...

  • Nortel CVX 600 - page 154

    Cable Sp ecificatio ns A-12 296-10 11-202 Rel. 5.0 , D oc. Rev. 02 .01 CVX 600 Ha rdware I nstallati on Gu ide E1 and T1 Inter face Line Specif ications The DS1-DAC-L TM, E1-DAC-L TM, and SCC-T1-RL TM interfa ces provide UTP support . The fol lowing fi gure shows t he RJ-45 in terface on these modu les: RJ-45 Pin and Signal Assignme nt s The fo llo ...

  • Nortel CVX 600 - page 155

    Cable S pecificat ions 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 A-13 T echnica l Specific ations E1 and T1 Shie lded Cable Specifications Shield e d ca bl ing is an EMI r eq uir ement f or CVX 600 E1 netwo rk conf ig urations , but i s optiona l for T1 ne twork confi guratio ns. DS3 Coaxial Ca ble Specifications The DS3 coaxi al cable must meet t h ...

  • Nortel CVX 600 - page 156

    Tandem CVX to RAS CVX Cr ossover Cable A-14 296-10 11-202 Rel. 5.0 , D oc. Rev. 02 .01 CVX 600 Ha rdware I nstallati on Gu ide T andem CVX to RAS CVX Crossover Cable Introduction If you need a cro ssover cable to send dat a from a tande m CVX 600 to a RAS CVX 600, yo u must build the cable using the infor mation in this sect ion. Nortel Networks d ...

  • Nortel CVX 600 - page 157

    Tandem CVX to RAS CVX Crossover Ca ble 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 A-15 T echnica l Specific ations RJ-45 Pin Numbering The fo llowing f igure shows the numbering o f the RJ-45 connector : Note: Pins 3, 6, 7, an d 8 are not use d. 1 8 CVX-0083A ...

  • Nortel CVX 600 - page 158

    Audible a nd Visu al Alarm Inter face Sp ecificatio ns A-16 296-10 11-202 Rel. 5.0 , D oc. Rev. 02 .01 CVX 600 Ha rdware I nstallati on Gu ide Aud ibl e and V isual Ala rm Inte rf ace Spe ci f ic at ions The fo llowing f igure shows the alarm interfa ce connector with bot h styles of labeli ng. Alarm Interface Connector Signals The fo llowing t abl ...

  • Nortel CVX 600 - page 159

    Power Spe cificati ons 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 A-17 T echnica l Specific ations Power Specifications Power Options The CVX 600 is powered b y an AC or DC p ower source. Use the infor mation in this s ecti on t o pl an for AC or DC p ow er . AC Power Requi rement s The i nsta lla tio n s ite mu st me et th e fo ll ow in g A C powe r ...

  • Nortel CVX 600 - page 160

    SCC-LTM/-RLTM Interfa ces A-18 296-10 11-202 Rel. 5.0 , D oc. Rev. 02 .01 CVX 600 Ha rdware I nstallati on Gu ide SCC-L TM/-RL TM Interfaces The fo llowing t able lists the inte rfaces on the SCC-L TM and SCC-RL TM: Interface Des cription Cons ole • One DB-9 RS-232 serial port HSSI (SCC-HSSI-RL TM) • One por t • 50-pin c onnector • S tatus ...

  • Nortel CVX 600 - page 161

    DAC-LTM/-RLTM External Clock Interface 296-1011-2 02 Rel. 5.0, Doc. R ev. 02.01 A-19 T echnica l Specific ations DAC-L TM/-RL TM External Clock Interface The fo llowing ap plies to all DAC L TMs and RL TMs with an ex ternal c lock port: • The exter nal clock cicui t ry con tains a standard T1/ E1 LIU device with re ceive TIP/RING te rminat ed at ...

  • Nortel CVX 600 - page 162

    ...

  • Nortel CVX 600 - page 163

    296-1 011-202 Rel . 5.0, Do c. Rev. 02.01 Index- 1 Index A AC and DC power 1-12 AC power m od ule 1-3 AC pow er requir emen ts A-17 airflow requi r emen ts A-4 alarm interface conn ecting 2-2 specificatio ns A-16 anch or kit s, fo r P TE 2000 rack 1-9 antistatic wrist strap, attach ing 3-2 B balun 2-10 C cable m ounts 2-27 cables connect i ng to a ...

  • Nortel CVX 600 - page 164

    Index-2 296- 1011-202 Re l. 5.0, Do c. Rev . 02.01 Index conn ecting the CVX 60 0 to 2-26 F fan modu le 1-3 fan modu le, rep l acing 3-3 1 filler panels, in stalling and removin g 3-4 flash m emory cards, in stalling an d removing 2-29 G grou nd in g loc a tio n 2-1 7 , 2-18 , 2-19 grou nding the ch assis f or DC power using t he co mpre ssi on ter ...

  • Nortel CVX 600 - page 165

    296-10 11-202 Rel. 5.0 , Doc. Rev . 02.01 Inde x-3 Index redundant lin e terminatio n modules (RL TMs), replacing 3-16 regulato ry compli anc e inform a tion iii replac ement har d ware, or de ring 3-44 S SCC-RL TM in terface specifica tions A-18 , A-19 system control card (SCC) LEDs 2-4 4 , 2-45 , 2-4 6 , 2-47 replac ing the SCC-RL TM 3-16 replac ...

  • Nortel CVX 600 - page 166

    ...

  • Nortel CVX 600 - page 167

    ...

  • Nortel CVX 600 - page 168

    CVX 600 Multi-Service A ccess Switch Hardware Installation Guid e *Nortel, Nortel Network s, the Nortel Networks corporate logo, the Globemark design, and CVX are trademarks of Nortel Networks. All other trademarks are the property of their owners. © 2001 Nortel Networks. All rights reserved. Inform ation in this do cument is subject to change wit ...

Manufacturer Nortel Category Switch

Documents that we receive from a manufacturer of a Nortel CVX 600 can be divided into several groups. They are, among others:
- Nortel technical drawings
- CVX 600 manuals
- Nortel product data sheets
- information booklets
- or energy labels Nortel CVX 600
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nortel CVX 600.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nortel CVX 600, service manual, brief instructions and user manuals Nortel CVX 600. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nortel CVX 600.

Similar manuals

A complete manual for the device Nortel CVX 600, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nortel CVX 600 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nortel CVX 600.

A complete Nortel manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nortel CVX 600 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nortel CVX 600, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nortel CVX 600, that we can find in the current document
3. Tips how to use the basic functions of the device Nortel CVX 600 - which should help us in our first steps of using Nortel CVX 600
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nortel CVX 600
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nortel CVX 600 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nortel CVX 600?

Use the form below

If you did not solve your problem by using a manual Nortel CVX 600, ask a question using the form below. If a user had a similar problem with Nortel CVX 600 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)