English dropdown-ico

Manual JBL SCS180.6

12 pages 0.34 mb
Download

Go to site of 12

Summary
  • JBL SCS180.6 - page 1

    SCS1 8 0.6 SURROUND CINEMA SPEAKERS OWNER’S GUIDE ® SCS180.6 OM 7/21/04 12:38 PM Page 1 ...

  • JBL SCS180.6 - page 2

    2 READ FIRST! Important Safety Precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions. 8. Do not install nea ...

  • JBL SCS180.6 - page 3

    3 INCLUDED THANK Y OU FOR CHOOSING JBL For more than 50 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. W e’re confident that the JBL system you have chosen will provide every note of enjoy- ment that you expected – and that ...

  • JBL SCS180.6 - page 4

    4 SPEAKER PLACEMENT SUBWOOFER SURROUND SPEAKERS 5 – 6 ft FRONT SPEAKERS 0-2 ft The front speakers should be placed the same distance from each other as they are from the listening position. They should be placed at about the same height from the floor as the listeners’ ears will be, or they may be angled toward the listeners. The center channel ...

  • JBL SCS180.6 - page 5

    5 MOUNTING OPTIONS On shelves. W ALL-MOUNTING On the wall. W all brackets are included. Slide speaker onto support. On optional stands ( FS1000 ). Attach plate to wall. The brackets should be placed, if possible, so that the screws will fasten into a wooden wall stud. If that is not possible, use properly selected wall anchors. The customer is resp ...

  • JBL SCS180.6 - page 6

    6 CONNECTION TIPS SPEAKER CONNECTIONS Separate and strip the ends of the speaker wire as shown. The wires sup- plied with the system may already be stripped and tinned for easy insertion into the speaker terminals. Speakers and electronics terminals have correspon- ding (+) and (–) terminals. Most manufacturers of speakers and electronics, includ ...

  • JBL SCS180.6 - page 7

    7 Use this installation method for Dolby Digital, DTS or other digital surround processors: Use the line-level input jack marked “LFE” for the Low- Frequency Effects channel. Connect this jack to the LFE output or subwoofer output on your receiver or amplifier . Connect each speaker to the corresponding speaker terminals on your receiver or amp ...

  • JBL SCS180.6 - page 8

    8 DOLBY PRO LOGIC (NON-DIGIT AL) – SPEAKER LEVEL Use this installation method for Dolby Pro Logic applica- tions (not Dolby Digital, DTS or other digital processing), where the receiver/processor does not have a subwoofer output, or a volume-controlled preamp (line-) level output: Connect your receiver or amplifier’ s front left and right speak ...

  • JBL SCS180.6 - page 9

    9 OPERA TION MIN MAX Subwoofer Level MIN MAX Subwoofer Level Move the Master Power switch (marked “Power” ¡ ) to the “•” (On) position to use the subwoofer . The SUB180 subwoofer will auto- matic ally turn on or go into standby (sleep) mode when left in the auto mode (“Auto/ On” switch ™ in the “Auto” position). When your recei ...

  • JBL SCS180.6 - page 10

    10 If there is no sound from any of the speakers: • Check that receiver/ampli- fier is on and a source is playing. • Check that the powered subwoofer is plugged in, and its Power switch ¡ is switched on (“ • ” position). • Check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are con- nected. M ...

  • JBL SCS180.6 - page 11

    11 If there is no sound from the surround speakers: • Check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are con- nected. Make sure none of the speaker wires are frayed, cut or punctured, or touching each other . • Review proper operation of your receiver/amplifier and its surround sound features. ? ...

  • JBL SCS180.6 - page 12

    12 SCS1 80.6 System Frequency Response 30Hz – 20kHz (–6dB) Satellites Recommended Power 10 – 100 W atts Impedance 8 Ohms nominal Sensitivity 88dB @ 1 W att/1 meter T weeter One 1/2" (13mm) titanium-laminate dome, video-shielded Midrange Dual 3" (75mm) drivers, video-shielded Dimensions (H x W x D) 8-1/8" x 3-1/2" x 3-7/8&q ...

Manufacturer JBL Category Portable Speaker

Documents that we receive from a manufacturer of a JBL SCS180.6 can be divided into several groups. They are, among others:
- JBL technical drawings
- SCS180.6 manuals
- JBL product data sheets
- information booklets
- or energy labels JBL SCS180.6
All of them are important, but the most important information from the point of view of use of the device are in the user manual JBL SCS180.6.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals JBL SCS180.6, service manual, brief instructions and user manuals JBL SCS180.6. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product JBL SCS180.6.

Similar manuals

A complete manual for the device JBL SCS180.6, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use JBL SCS180.6 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of JBL SCS180.6.

A complete JBL manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual JBL SCS180.6 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the JBL SCS180.6, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the JBL SCS180.6, that we can find in the current document
3. Tips how to use the basic functions of the device JBL SCS180.6 - which should help us in our first steps of using JBL SCS180.6
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with JBL SCS180.6
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of JBL SCS180.6 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning JBL SCS180.6?

Use the form below

If you did not solve your problem by using a manual JBL SCS180.6, ask a question using the form below. If a user had a similar problem with JBL SCS180.6 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)