English dropdown-ico

Manual IDEAL INDUSTRIES IDEAL 5009-2

16 pages 1.34 mb
Download

Go to site of 16

Summary
  • IDEAL INDUSTRIES IDEAL 5009-2 - page 1

    1 Operating Instructions Modular conveyor belt system IDEAL 5009-1 IDEAL 5009-2 ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 2

    2 IDEAL 5009-1 • IDEAL 5009-2 ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 3

    3 T able of content s 1. General ....................................................... 4 1.1 Safety Instructions ...................................... 4 1.2 Application ................................................... 4 2. Installation ................................................... 5 2.1 T ransport ....................................... ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 4

    4 IDEAL 5009-1 • IDEAL 5009-2 25 1. General This instruction manual is meant to help you to operate the machine easily and safely . Please read these operating instructions before putting the machine into operation and observe the safety regulations. 1.1 Safety Instructions  Danger! Non-compliance with the instructions may endanger persons. ? ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 5

    5 780 mm 660 mm 32 “ 27 “ 15-01 23 1 2 2. Inst allation The machine is mobile on castors. The machine must be installed on a sturdy , dry and level floor . Danger! - The machine must not be used out side. - Do not use in the vicinity of flammable liquids or gases. - Do not use in wet environments. - Protect the power cable from extreme heat, oi ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 6

    6 IDEAL 5009-1 • IDEAL 5009-2 26-01 23-01 1 23-02 2 2.2 Preparing for inst allation - Open the door . - Remove the transport safety device (1) and keep for later use. - Mount the supporting screws (3). - Screw down the supporting screws until the rear castors are balanced. W aste cart - Put the plastic bag into the waste cart as described under ? ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 7

    7 33-01 27 31-01 30-01 4 5 - Remove the springs from the ball-ends (4) on both sides. - Dismount the tie-bar (5). - Push the slide to the back - Push back the conveyor belt into the machine. - T urn both handles to lock. ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 8

    8 IDEAL 5009-1 • IDEAL 5009-2 06-01 2.3 Power supply The rating plate is located at the rear of the machine. - Data stated on the rating plate - V o lt age “V“, - Frequency “Hz“, - Power consumption “A“ must correspond to the values of the power supply unit. - Earth wire must be available. - Connect the machine to the mains. 2.4 Check ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 9

    9 25 05-01 1 2 3 4 5 6 7 8 06-04 15 15 11 1 1 8 32-01 15 15 3. Operation Danger! - When the main switch is switched on do not use steps or anything similar when operating or repairing the machine. - The machine may only be operated by persons who have read and understood the operating instructions. - Do not reach into the running shredding mechanis ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 10

    10 IDEAL 5009-1 • IDEAL 5009-2 05-02 2 7 8 7 05-04 05-05 9 2 4 6 When large amounts of paper are inserted the machine automatically adjust s to a more powerful, slower capacity . If this capacity is still not powerful enough the machine will reverse shortly and then return to the forwards mode. This is repeated until all material is completely de ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 11

    11 26-01 10 10 12 12 26-03 06-06 13 13 14 14 3.4 Replacing the plastic bag Replace bag when “bag full“ indicator illuminates. - Open the door (10). - Pull out the waste cart. - Remove the round belt (12) from the waste bag frame. - Pull the bag onto a pallet. - T ie the bag (for sealing parts and binding wires see accessories). - Place a new ba ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 12

    12 IDEAL 5009-1 • IDEAL 5009-2 05-03 5 7 9 2 4. T rouble shooting Danger! Disconnect from the mains before starting any service work or before removing the cover . Malfunction: S tandby (5) is not lighting up. Cause: - Main switch is OFF - Emergency button is pressed. - Key switch is vertical. - Machine is not plugged in. - On-site fuse. - Motor ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 13

    13 05-03 5 7 9 2 Malfunction: Machine switches of f during normal operation. Cause: Indicator for “bag full“ or “shred bag full“ illuminates. Remedy: Renew plastic bag. Cause: Y ellow pilot light (7) illuminates, machine is overheated. Remedy: W ait approx. 10 to 20 minutes for the machine to cool down. S t art afresh. Cause: Y ellow pilot ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 14

    14 IDEAL 5009-1 • IDEAL 5009-2 9000 595 9000 593 9000 591 9000 597 WWW Service @krug-priester .com 5. Accessories Plastic bags 350l (50 pieces) ................ 9000 414 Environmentally friendly oil 10 x 0,2 l .... 9000 610 Module conveyor belt system (conveyor belt) ...................................... 9000 595 Pusher ......................... ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 15

    15 EG-KONFORMITÄTSERKLÄRUNG EC-declaration of conformity Déclaration de conformité CE Declaración CE de conformidad Dichiarazione CE di conformità EG-verklaring van overeenstemming Declaraçao CE de conformidade EF-overensstemmelseserklæring - Hiermit erklären wir , daß die Bauart von - Herewith we declare that - Par la présente, nous dé ...

  • IDEAL INDUSTRIES IDEAL 5009-2 - page 16

    16 IDEAL 5009-1 • IDEAL 5009-2 B5009_3e.pmd 03/2003 IDEAL Krug & P riester 72336 Ba lingen Germany w ww .ideal.de ...

Manufacturer IDEAL INDUSTRIES Category Paper Shredder

Documents that we receive from a manufacturer of a IDEAL INDUSTRIES IDEAL 5009-2 can be divided into several groups. They are, among others:
- IDEAL INDUSTRIES technical drawings
- IDEAL 5009-2 manuals
- IDEAL INDUSTRIES product data sheets
- information booklets
- or energy labels IDEAL INDUSTRIES IDEAL 5009-2
All of them are important, but the most important information from the point of view of use of the device are in the user manual IDEAL INDUSTRIES IDEAL 5009-2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals IDEAL INDUSTRIES IDEAL 5009-2, service manual, brief instructions and user manuals IDEAL INDUSTRIES IDEAL 5009-2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product IDEAL INDUSTRIES IDEAL 5009-2.

Similar manuals

A complete manual for the device IDEAL INDUSTRIES IDEAL 5009-2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use IDEAL INDUSTRIES IDEAL 5009-2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of IDEAL INDUSTRIES IDEAL 5009-2.

A complete IDEAL INDUSTRIES manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual IDEAL INDUSTRIES IDEAL 5009-2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the IDEAL INDUSTRIES IDEAL 5009-2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the IDEAL INDUSTRIES IDEAL 5009-2, that we can find in the current document
3. Tips how to use the basic functions of the device IDEAL INDUSTRIES IDEAL 5009-2 - which should help us in our first steps of using IDEAL INDUSTRIES IDEAL 5009-2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with IDEAL INDUSTRIES IDEAL 5009-2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of IDEAL INDUSTRIES IDEAL 5009-2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning IDEAL INDUSTRIES IDEAL 5009-2?

Use the form below

If you did not solve your problem by using a manual IDEAL INDUSTRIES IDEAL 5009-2, ask a question using the form below. If a user had a similar problem with IDEAL INDUSTRIES IDEAL 5009-2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)