English dropdown-ico

Manual Maxxsonics P1-600.2

13 pages 3.58 mb
Download

Go to site of 13

Summary
  • Maxxsonics P1-600.2 - page 1

    P1-600.2 / P1-1000.2 P1-600.4 / P1-1000.4 P1-2000.1 / P1-5000.5 ...

  • Maxxsonics P1-600.2 - page 2

    INDEX P AGE General Installation Procedure..........................................................................................................................................................................................1 Amplifier Feature Descriptions.......................................................................................... ...

  • Maxxsonics P1-600.2 - page 3

    GENERAL INST ALLA TION PROCEDURE 1 System Design The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link. Please remember that higher power systems are not necessarily useful purely for high sound p ...

  • Maxxsonics P1-600.2 - page 4

    AMPLIFIER FEA TURE DESCRIPTIONS POWER ONE AMPLIFIERS: ! ! ! ! ! ! ! Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridged operation except the mono amps All Crunch amplifiers feature a comprehensive diagnostic system, with speaker lead short circuit, and amplifier DC faults indicated by the red “ PROTECT” LED. which ...

  • Maxxsonics P1-600.2 - page 5

    3 P1-600.2 / P1-1000.2 2 CHANNEL AMPLIFIER APPLICA TIONS 4. MODE: This is the most basic application for the P1 Series 2 channel amplifiers. Should be in the STEREO position. 5. Line Level: 1. Interconnect cable checklist: Connect the LINE INPUTS to the Radio/CD with good quality RCA cables. Refer to the section “Setting up systems after installa ...

  • Maxxsonics P1-600.2 - page 6

    P1-600.4 / P1-1000.4 4-CHANNEL AMPLIFIER APPLICA TIONS 4 CHANNEL FULL RANGE SYSTEM 2 or 3 CHANNEL SYSTEM - HI P ASS: N/A Here we show how to use the 4 channel amplifiers as straight forward discrete 4 - LOW P ASS: N/A channel full range units. The MODE switch should be in 4CH. Channels 3/4: Interconnect cable checklist: - Connect the four inputs of ...

  • Maxxsonics P1-600.2 - page 7

    P1-600.4 / P1-1000.4 4-CHANNEL AMPLIFIER APPLICA TIONS Front/Rear high pass, using a 2 channel amplifier for mono sub bass Channels 1/2: The combination of a 2 and a 4 channel amplifier , utilizing their built in - HI P ASS: 100 Hz crossovers, makes it a snap to put together a full system with front and rear highs, with mono sub bass. LOW P ASS: N/ ...

  • Maxxsonics P1-600.2 - page 8

    POWER INPUT GND REM BA TT+12V SPEAKER OUTPUT + + - - FUSE 6 Basic application Crossover frequency control checklist: These sub bass amplifiers can be used in any of the bi-amplification systems described in LOW PASS: 40Hz to 150Hz this manual, replacing the 2 channel amplifiers as per the illustrations. SUBSONIC:15 Hz to 55 Hz BASS EQ: 0 to +12dB I ...

  • Maxxsonics P1-600.2 - page 9

    7 Basic application P1-5000.5 5-CHANNEL AMPLIFIER APPLICA TION Channels 3/4: Here we show how to use the channel amplifier as straightforward discrete 5 - HI P ASS: N/A channel full range units. - LOW P ASS: N/A Interconnect cable checklist: - Connect the four inputs of the amplifier to a Radio/CD with quality RCA cables. Level control checklist: - ...

  • Maxxsonics P1-600.2 - page 10

    8 ...

  • Maxxsonics P1-600.2 - page 11

    9 SETTING UP SYSTEMS AFTER INST ALLA TION FOR BEST PERFORMANCE P1-2000.1 General: At this point you are ready to get more specific on the settings for your amplifier . Subsonic: This setting acts as a low frequency cut off for your system bass reproduction. The point that you set it at cuts of f any frequencies from reproduction beyond this point. ...

  • Maxxsonics P1-600.2 - page 12

    TROUBLESHOOTING A SYSTEM 10 The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the PROTECT system built into all Crunch amplifiers The diagnostic system will shut down the amplifier , until reset by turning the head unit off, and back on. This ...

  • Maxxsonics P1-600.2 - page 13

    1 1 As the manufacturer of Maxxsonics, MB Quart, Autotek, Crunch and Hifonics car audio products, Maxxsonics USA Inc. W arrants to the origina l consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Y ear from date of purchase. All other parts and accessories of the system are warrantied to be free from de ...

Manufacturer Maxxsonics Category Car Amplifier

Documents that we receive from a manufacturer of a Maxxsonics P1-600.2 can be divided into several groups. They are, among others:
- Maxxsonics technical drawings
- P1-600.2 manuals
- Maxxsonics product data sheets
- information booklets
- or energy labels Maxxsonics P1-600.2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Maxxsonics P1-600.2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Maxxsonics P1-600.2, service manual, brief instructions and user manuals Maxxsonics P1-600.2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Maxxsonics P1-600.2.

Similar manuals

A complete manual for the device Maxxsonics P1-600.2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Maxxsonics P1-600.2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Maxxsonics P1-600.2.

A complete Maxxsonics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Maxxsonics P1-600.2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Maxxsonics P1-600.2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Maxxsonics P1-600.2, that we can find in the current document
3. Tips how to use the basic functions of the device Maxxsonics P1-600.2 - which should help us in our first steps of using Maxxsonics P1-600.2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Maxxsonics P1-600.2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Maxxsonics P1-600.2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Maxxsonics P1-600.2?

Use the form below

If you did not solve your problem by using a manual Maxxsonics P1-600.2, ask a question using the form below. If a user had a similar problem with Maxxsonics P1-600.2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)