English dropdown-ico

Manual Intermate LX T-04

81 pages 0.2 mb
Download

Go to site of 81

Summary
  • Intermate LX T-04 - page 1

    LX T-04 Twinax Connection User's Guide Docum ent GM-001- 5 Fifth edition of the Intermate LX T-04 Twinax Connection User’s Guide Printed in Denmark No part of this guide ma y be photocopied or reproduced in any way , except where noted, without the written consent of LCI Interm ate A/S. © Copyrig ht LCI Interm ate A/S 1998 and 1999. All rig ...

  • Intermate LX T-04 - page 2

    N o t i c e s 2 U s e r ‘ s G u i d e Notice LCI Interm ate A/S m ake s no warranty of any kind w ith regard to the contents or use of this guide, and specifically disclaim s any express or im plied warranties on merchant ability or fitness fo r any particular purpose. LCI Interm ate A/S shall not be liable for errors contained herein or for inci ...

  • Intermate LX T-04 - page 3

    N o t i c e s I n t e r m a t e L X T - 0 4 3 Trademark Credits Intermate is a registered tradem ark of LCI Interm ate A/S. IBM, Epson, Hewlett Packard and LaserJet are registered tradem arks of the respective holders. Lexmark is a registered trademark of L exmark International, Inc. ...

  • Intermate LX T-04 - page 4

    N o t i c e s 4 U s e r ‘ s G u i d e ...

  • Intermate LX T-04 - page 5

    C o n t e n t s I n t e r m a t e L X T - 0 4 5 Contents About this guide ...................................... 9 1. I ntroduction ...................................... 1 1 T h e o r y o f O p e r a t i o n ...................................... 1 1 A S C I I P r i n t e r D r i v e r...................................... 1 1 I B M P r i n t e r ...

  • Intermate LX T-04 - page 6

    C o n t e n t s 6 U s e r ‘ s G u i d e B a r C od e s ............................................. . 3 8 D e f i n e B a r C o d e s .............................................. . 3 8 P r i n t B a r C o d e ................................................ . 3 9 5. S o l v i n g P r ob l e m s ................................. . 4 1 M i ss i ...

  • Intermate LX T-04 - page 7

    C o n t e n t s I n t e r m a t e L X T - 0 4 7 O p e r a ti n g E n v i r o n m e n t ......................................... . 7 3 G. R e l a t e d P ub li ca ti on s ................................... . 7 5 H. Custo m er Suppor t .................................... . 7 7 I nd e x ............................................ . 7 9 ...

  • Intermate LX T-04 - page 8

    C o n t e n t s 8 U s e r ‘ s G u i d e ...

  • Intermate LX T-04 - page 9

    A b o u t t h i s m a n u a l I n t e r m a t e L X T - 0 4 9 A bout this guide The g uide applies to the Inter m ate L X T-04 with so f tware release K 12-xxxx and to subsequent releases until otherwis e noti f ied. The g uide consists of f i v e sections: Introduction The Inter m ate L X T-04 and the concepts used in this guide. Installation Conn ...

  • Intermate LX T-04 - page 10

    A b o u t t h i s m a n u a l 10 U s e r ‘ s G u i d e ...

  • Intermate LX T-04 - page 11

    I n t r o d u c t i o n I n t e r m a t e L X T - 0 4 11 1. Introduction The Interm ate LX T-04 is a protocol conv erter, which m akes it possible to connect the Lexm ark 23xx Plus, Lexm ark 4227 and Lexm ark 4227 Plus printers to an IBM 5250 (Twinax) envi ronment. T heory of Op eration Print data from an IBM host is in a format that cannot be reco ...

  • Intermate LX T-04 - page 12

    I n t r o d u c t i o n 12 U s e r ‘ s G u i d e IBM Printer Emula tion The f ollowin g IBM printers can be e m ulated b y the Inter m ate L X T - 04 and the attached L ex m ar k m atrix printer: IBM 4214 (de f ault). IBM 4230. IBM 5256. IBM 5224. IBM 5225. See Appendix F f or technical speci f ications . ...

  • Intermate LX T-04 - page 13

    I n s t a l l a t i o n I n t e r m a t e L X T - 0 4 13 2. Installation Unp acking Unpack and check all the item s using the following check list. Contact y our dealer if anything is m issing or dam aged. All pack ing m aterials are recyclable. The Interm ate LX T-04 Hardwa re Pack (part no: 23564) contains: Interm ate LX T-04 Part no: 23564 Twina ...

  • Intermate LX T-04 - page 14

    I n s t a l l a t i o n 14 U s e r ‘ s G u i d e 3. Set the address switch to position '9' (test printout function). 4. Switch on the printer. The SYSTEM indicator flashes for a f ew seconds. The Interm ate LX T-04 produces a test printout on the printer, which show s the firmware rev ision and basic configuration. The default configura ...

  • Intermate LX T-04 - page 15

    I n s t a l l a t i o n I n t e r m a t e L X T - 0 4 15 Sy stem A ttach ment When your Interm ate L X T-04 is configured, and the configuration is verified by a test printout, it is tim e to connect it to the IBM host. The AS/400 configuration is easiest done using the Auto Configuration. The LX T-04 then configures as a *4214 printer dev ice. Mak ...

  • Intermate LX T-04 - page 16

    I n s t a l l a t i o n 16 U s e r ‘ s G u i d e 7. Make a test printout: CHGJOB PRTDEV(PRT08) PRTDEVADR CTLD(CTL01) If you do not receive a printout, check if there is a message waiting on the writer: WRKWTR PRT* Caution: Twinax cables are heavy. Please m ake sure that they are suff iciently m echanically supported in order to avoid dam ag e to ...

  • Intermate LX T-04 - page 17

    C o n f i g u r a t i o n I n t e r m a t e L X T - 0 4 17 3. Configuration Although the Interm ate LX T- 04 is prepared for operation at delivery, y ou m ay want to change the configuration. A test printout v erifies the current configuration, see Section 2 . The configuration can be done in two way s: Configuration from a Terminal This is the m e ...

  • Intermate LX T-04 - page 18

    C o n f i g u r a t i o n 18 U s e r ‘ s G u i d e term inal. The rest of this s ection is a guide to the Configuration Utility. If you want to restart the configuration, just switch the Intermate L X T-04 off and repeat f rom step 3. Key Definitions ============================================================== Intermate LX T-04 4214 version: K1 ...

  • Intermate LX T-04 - page 19

    C o n f i g u r a t i o n I n t e r m a t e L X T - 0 4 19 Basic Con figuratio n ============================================================== Intermate LX T-04 4214 version: K12-xxxx 960103 ============================================================== MAIN MENU _Basic Configuration View Configuration Print Parameter List Print EBCDIC to ASCII ta ...

  • Intermate LX T-04 - page 20

    C o n f i g u r a t i o n 20 U s e r ‘ s G u i d e Select Printer Driv er This subm enu is shown after you hav e selected 'Basic Configuration' in the Main Menu. ============================================================== BASIC CONFIGURATION ============================================================== PRINTER DRIVER _Generic printe ...

  • Intermate LX T-04 - page 21

    C o n f i g u r a t i o n I n t e r m a t e L X T - 0 4 21 Select IBM Prin ter Emulation This subm enu is shown after you hav e selected Printer Driver. ============================================================== BASIC CONFIGURATION ============================================================== IBM PRINTER EMULATION _ IBM 4214 model 2 IBM 5256 m ...

  • Intermate LX T-04 - page 22

    C o n f i g u r a t i o n 22 U s e r ‘ s G u i d e Select System Language This subm enu is shown after you hav e selected IBM Printer Em ulation. ============================================================== BASIC CONFIGURATION ============================================================== SYSTEM LANGUAGE 037 US English/Canadian 273 Austrian/Ger ...

  • Intermate LX T-04 - page 23

    C o n f i g u r a t i o n I n t e r m a t e L X T - 0 4 23 Save the Configura t ion Select 'Save' in the Main Menu . The following subm enu is shown: ============================================================== SAVE ============================================================== SAVE SETTINGS PERMANENTLY _Yes No Use <Up><Down> ...

  • Intermate LX T-04 - page 24

    C o n f i g u r a t i o n 24 U s e r ‘ s G u i d e Exit the Conf iguration Select 'Exit' in the M ain Menu . The following subm enu is shown: ============================================================== SAVE ============================================================== EDIT CONFIGURATION _Yes No Please remember to set the Device Addr ...

  • Intermate LX T-04 - page 25

    A d v a n c e d F u n c t i o n s I n t e r m a t e L X T - 0 4 25 4. A dv anced Functions The Interm ate LX T-04 supports a num ber of functions beyond standard IBM printer operation. During norm al m ode of operation, Intermate L X T-04, tog ether with y our printer, em ulates the IBM twinax printer selected in y our configuration. In addition, t ...

  • Intermate LX T-04 - page 26

    A d v a n c e d F u n c t i o n s 26 U s e r ‘ s G u i d e Main Menu A num ber of the advanced functions can be programm e d or edited using Configuration from a Term inal. The Main Menu is display ed when the configuration is started (See Configuration from a Terminal on page 16). ============================================================== In ...

  • Intermate LX T-04 - page 27

    A d v a n c e d F u n c t i o n s I n t e r m a t e L X T - 0 4 27 Configurat ion from t he Sy stem This function allows you to configure the Interm ate LX T-04 w ithout connecting it directly to a term inal as described in Section 3. By inserting configuration com m ands in your docum ent, y ou can tailor the Interm ate LX T-04 to m eet special re ...

  • Intermate LX T-04 - page 28

    A d v a n c e d F u n c t i o n s 28 U s e r ‘ s G u i d e Note: The com m ents (within brackets) should not be included in y our docum ent. T ransp arency IBM PC Support Virtual Printer is one way of sending data transparent to the printer. This m ethod is alway s active and is not described in this guide. This section describes the Interm ate L ...

  • Intermate LX T-04 - page 29

    A d v a n c e d F u n c t i o n s I n t e r m a t e L X T - 0 4 29 Document Example (Multi-by te Transparency): You want the text to have an underlined part in the m iddle. Assum ing that y ou have selected IBM Proprinter em ulation, 'start underline' and 'stop underline' are defined by the ASCII codes $1B,$2D,$31 and $1B,$2D,$3 ...

  • Intermate LX T-04 - page 30

    A d v a n c e d F u n c t i o n s 30 U s e r ‘ s G u i d e Define the Seque nces The param eters are defined when Extended Emulation Mode is entered. Example: Enter Extended Em ulation Mode and set the Transparency L ead-In Sequence to '%%', the Configuration L ead-In Sequence to ' %P' and the Trailer Sequence to '%' ...

  • Intermate LX T-04 - page 31

    A d v a n c e d F u n c t i o n s I n t e r m a t e L X T - 0 4 31 Example: Use the new sequences in the s ame exam ple as in Section 4 (Multi-by te Transparency in IBM Proprinter em ulation): This is !?<1B2D31>&underlined!?<1B2D30>& text Printout: This is underlined text This results is the sam e printout as in the previous sec ...

  • Intermate LX T-04 - page 32

    A d v a n c e d F u n c t i o n s 32 U s e r ‘ s G u i d e Character Translation SCS data stream EBCDIC language specific characters are first trans lated into EBCDIC International Set 5 characters. This is the internal character representation in the Interm ate LX T-04. The EBCDIC International Set 5 characters are then translated into ASCII cod ...

  • Intermate LX T-04 - page 33

    A d v a n c e d F u n c t i o n s I n t e r m a t e L X T - 0 4 33 %P (Configuration lead-in sequence) =54,5 (Select Editable Set) =203,$4A,$7B (Translate EBCDIC Int. 5 $4A to ASCII $7B) =206 (Initialize settings) =205 (Save settings permanently) % '54' Is the Param eter num ber. '5' selects the Editable Set (see Appendix A ). & ...

  • Intermate LX T-04 - page 34

    A d v a n c e d F u n c t i o n s 34 U s e r ‘ s G u i d e User De fine d Stri ngs There are ten param eters in the Param eter List that can be prog ram me d as User Definable String (Param eters #120-#129). A com m on application is to program and store various printer control com m ands, and send them to the printer using string references rath ...

  • Intermate LX T-04 - page 35

    A d v a n c e d F u n c t i o n s I n t e r m a t e L X T - 0 4 35 Using the S trings: To underline text in a docum ent using strings num ber ' 0' and ' 1': This is %Z0underlined text%Z1 text Printout: This is underlined text Note: To use the Strings, Extended Em ulation Mode m ust be entered. Stri ng Subs tit utions This functi ...

  • Intermate LX T-04 - page 36

    A d v a n c e d F u n c t i o n s 36 U s e r ‘ s G u i d e Example: Assum e that you hav e selected IBM Proprinter em ulation. The docum ent is prepared for an HP LaserJet and contains 'start underline' and 'stop underline' pass-throug h com m ands at several locations. To print the docum ent with an IBM Proprinter, the sequen ...

  • Intermate LX T-04 - page 37

    A d v a n c e d F u n c t i o n s I n t e r m a t e L X T - 0 4 37 ============================================================== EDIT PARAMETERS ============================================================== Free String Area: $1AA0 #150 Match String 1_____$1B,$26,$64,$44. #151 Subst. String 1_____$1B,$2D,$31. #152 Match String 2_____$1B,$26,$64,$4 ...

  • Intermate LX T-04 - page 38

    A d v a n c e d F u n c t i o n s 38 U s e r ‘ s G u i d e Note: String Substitutions are program m ed in Extended Em ulation Mode. Bar Codes This function gives you easy access to a range of standard bar code types. You can design every single bar code printout to m eet y our specific requirem ents, such as width and height. There are two functi ...

  • Intermate LX T-04 - page 39

    A d v a n c e d F u n c t i o n s I n t e r m a t e L X T - 0 4 39 value 1: Bar Code Type. Selectable v alues (in decim al): 1 = Code 39 3= U P C - A 8 = EAN8 9 = EAN13 12 = 2 of 5 Interleaved 13 = Codabar Matrix 17 = Code 128 value 2: Module Width as a multiple of 1/120 inch. The value m ay range from 1 to 32 (in decim al). value 3: Bar Code Heigh ...

  • Intermate LX T-04 - page 40

    A d v a n c e d F u n c t i o n s 40 U s e r ‘ s G u i d e Document Example: %P (Configuration lead-in sequence) =211,9,2,2,1,10 (Define Bar Code) =212,"123456789012" (Print Bar Code) % (Configuration trailer sequence) Printout Note: To Define and print bar code, Extended Emulation Mode m ust be entered. ...

  • Intermate LX T-04 - page 41

    S o l v i n g P r o b l e m s I n t e r m a t e L X T - 0 4 41 5. Solv ing Problems This section helps you to solve any problems that m ig ht arise when installing or using y our Intermate L X T-04 interface. There are three m ajor areas of diff iculty: Missing printouts. Incorrect printouts. Host com m unication problems. Use the following checkli ...

  • Intermate LX T-04 - page 42

    S o l v i n g P r o b l e m s 42 U s e r ‘ s G u i d e 3. System printouts: Is the SYSTEM indicator on? No: The Intermate L X T-04 is not correctly connected to the sy stem , or the power-up routine has been disturbed. Restart the interface (power-off/power-on). If this doesn't help, see Host Communication Problem . Flashing: The Interm ate ...

  • Intermate LX T-04 - page 43

    S o l v i n g P r o b l e m s I n t e r m a t e L X T - 0 4 43 Corrupted Pri ntouts This is generally caused by selecting a Printer Driver not m atching y our printer. The control com ma nds are then misinterpreted by the printer, causing corrupted printouts. If changing Printer Driver does not help, y ou can use the ASCII hexdum p function (see Pr ...

  • Intermate LX T-04 - page 44

    S o l v i n g P r o b l e m s 44 U s e r ‘ s G u i d e 4. Has the print job been released from the host? Check that Vary On has been m ade and that the print job has been released from the print queue. Ask y our Sy stem Manage r. 5. Is the twinax line terminated? The last unit on the twinax line must be term inated. Check that all units along the ...

  • Intermate LX T-04 - page 45

    S o l v i n g P r o b l e m s I n t e r m a t e L X T - 0 4 45 1. Make sure that y our printer is on-line. 2. Set the address switch to '9', and wait for approx. 3 seconds until the SYSTEM indicator starts to flash. You are now in the Test Mode. 3. Set the address switch to '8' to start the printout. 4. Set the address switch to ...

  • Intermate LX T-04 - page 46

    S o l v i n g P r o b l e m s 46 U s e r ‘ s G u i d e 3. Select position '4' for system hexdum p, or position '3' for ASCII hexdum p. 4. Repeat your print job. The data is now printed in hexadecim al form . 5. Set the address switch to '9' when the printout is completed. The SYSTEM indicator stops flashing. 6. Selec ...

  • Intermate LX T-04 - page 47

    S o l v i n g P r o b l e m s I n t e r m a t e L X T - 0 4 47 BE-BAR CODE ERROR Incorrect or insuff icient bar code definition. The bar code must be specified with five values. See Section 4 . E2-PERMANENT MEMORY CHECKSUM ERROR, FACTORY DEFAULTS SET This message indicates that the non- volatile m em ory has been corrupted. The Interm ate LX T-04 i ...

  • Intermate LX T-04 - page 48

    S o l v i n g P r o b l e m s 48 U s e r ‘ s G u i d e ...

  • Intermate LX T-04 - page 49

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 49 A ppendices A . Th e Parameter List The Param eter List shows the av ailable configuration of the Intermate L X T-04. Each param eter contains a value or string that is used to determ ine how the Interm ate LX T-04 should behav e towards the host and towards the printer. Printout Example This pri ...

  • Intermate LX T-04 - page 50

    A p p e n d i c e s 50 U s e r ‘ s G u i d e Printer Drivers A printer driver is a device driv er containing all the param eters required to drive a particular range of printers. The following printer drivers are av ailable in IBM 4214 em ulation: No Tit le No Title *30 Generic Pri nt er (def ault) 34 Epson LQ 31 IBM Graphics 35 Fujits u DL (DP L ...

  • Intermate LX T-04 - page 51

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 51 #15 ASCII Character Set Selects the ASCII Character S et to be used in the printer. Value Descripti on Value Description 0 US ASCII 7 Spani sh 1 Swedish/Finni sh 8 Japanes e 2 Danish/Norwegian 9 PC-8 3 Germ an/Aus trian 10 Roman-8 4 UK Engl i s h 11 PC-850 5 Ital i an 12 Xerox 3700 6 French/ B el ...

  • Intermate LX T-04 - page 52

    A p p e n d i c e s 52 U s e r ‘ s G u i d e #41 Transparency Lead-In Sequence Starts Multi-byte Transparency Mode. Value Descri ption Value Description <any seq> (max 8 charact er c odes) *<em pty> (default) #42 Configuration Lead-In Se quence Starts Configuration Mode. Value Descri ption Value Description <any seq> (max 8 char ...

  • Intermate LX T-04 - page 53

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 53 #46 Start of Job Sequence Sent before next host printout if timer Job Tim e-out has elapsed. Value Descriptio n Value Descri ption <any seq> (length and contents f ree of choice ) *<empty> (def ault) #53 Bar Code Driver Selects the graphics driver used for bar code printing. The defau ...

  • Intermate LX T-04 - page 54

    A p p e n d i c e s 54 U s e r ‘ s G u i d e #150-#189 String Substitutions Program m ing and use are described in section 4. Value Descri ption Value Description <any seq.> (any length and cont ents) *<empt y> (default ) ...

  • Intermate LX T-04 - page 55

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 55 B. EBCDIC Charac t er Table This table (EBCDIC International Set 5) shows the internal character representation in the Intermate L X T-04. Read each EBCDIC code as a column and row position. For exam ple EBCDIC International Set 5 code $81 represents the character 'a' . Note: If Euro Su ...

  • Intermate LX T-04 - page 56

    A p p e n d i c e s 56 U s e r ‘ s G u i d e ...

  • Intermate LX T-04 - page 57

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 57 C. Op erating th e LX T -04 The SYSTEM indicator This indicator (green) is lit when the Interm ate LX T-04 is connected to y our IBM system . It can also flash under the f ollowing conditions: Flash during a few seconds at power up. Flash in Test Mode. Described later in this chapter. Rapid flash ...

  • Intermate LX T-04 - page 58

    A p p e n d i c e s 58 U s e r ‘ s G u i d e Device ad dress Follow these steps to change the device address: 1. Switch the Interm ate LX T-04 off. 2. Select a new device address (positions 0- 6). 3. Switch the Interm ate LX T-04 on. A warning for change of device address is printed. 4. Step the address switch one position forward, and then back. ...

  • Intermate LX T-04 - page 59

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 59 Pos. Test Mode Function 0 Restart - same as p ow er off/p ow er o n. 1 Set Factor y Defa ults - abandon the current c onfigurat i on. See note. 2 Print Charac t er Trans lation Tabl e - see Appendix B . 3 ASCII Hex Dump Mode - trap the outgoi ng dat a stream and print c haracters and control c om ...

  • Intermate LX T-04 - page 60

    A p p e n d i c e s 60 U s e r ‘ s G u i d e 4. Press the printer's ON LINE/OFFLINE key twice to chang e em ulation. The new em ulation is confirmed by a printed me ssage. Repeat until the required em ulation mode is achiev ed. Refer to the list in Section 1. 5. Switch the Interm ate LX T-04 off to save the current em ulation. 6. Set the dev ...

  • Intermate LX T-04 - page 61

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 61 D. Updating t he Soft w are Software that can be Updated The Interm ate LX T-04 software held in Flash ROM . A specif ic cable is needed to upgrade the firmware. Checking if an update is available Contact your dealer to check if a new firmware release is av ailable. You should have the printer&ap ...

  • Intermate LX T-04 - page 62

    A p p e n d i c e s 62 U s e r ‘ s G u i d e 3. Disconnect the LX T-04 from the printer, ie disconnect the ribbon cable from the printer. 4. Make sure the PC has been powered Off. 5. Attach the download cable to the PC’s LPT1 port. Contact y our dealer for f urther information on the download cable. 6. Connect the LX T-04 to the download cable. ...

  • Intermate LX T-04 - page 63

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 63 18. Disconnect the interface f rom the download cable. 19. Connect the interface to the printer, ie connect the ribbon cable and the power cable. 20. Mount the interface on the back of the printer. 21. Set the switch on the side of the interf ace case to “ 9" (= test printout function). 22 ...

  • Intermate LX T-04 - page 64

    A p p e n d i c e s 64 U s e r ‘ s G u i d e ...

  • Intermate LX T-04 - page 65

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 65 E. Euro Support Support for the Euro sym bol can be achieved in tw o way s. Either by updating the LX T-04 firm ware and selecting the Euro character set or by m aking a perm anent character substitution in the interf ace. Both approaches require that the printer firmwa re supports the Euro sym b ...

  • Intermate LX T-04 - page 66

    A p p e n d i c e s 66 U s e r ‘ s G u i d e Euro Support via Terminal Conf igur ation The Euro sym bol is contained in the ASCII character set “PC-858". This is also the default character set f or the f irm ware release K12-8491 . Euro Support is disabled by selecting an ASCII character set other than “PC-858" for the current print ...

  • Intermate LX T-04 - page 67

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 67 2. Make sure the Interm ate LX T-04 is attached correctly to the printer. See separate sheet f or details about installing the interface. Note: If the LX T-04 was attached to the sy stem and operating, then the current address switch position represents the device address assigned to the L X T-04 ...

  • Intermate LX T-04 - page 68

    A p p e n d i c e s 68 U s e r ‘ s G u i d e 10. Select position “7" again. Within a f ew seconds, the Key Definitions m enu should appear on your term inal. ============================================================== Intermate LX T-04 4214 version: K12-8491 981130 ============================================================== KEY DEFIN ...

  • Intermate LX T-04 - page 69

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 69 13. Select the “Edit Parameters” m enu item . This brings up the following screen. ============================================================== EDIT PARAMETERS ============================================================== Free String Area: $1D99 Printer Driver: IBM Proprinter 001 Form Leng ...

  • Intermate LX T-04 - page 70

    A p p e n d i c e s 70 U s e r ‘ s G u i d e 20. Connect the LX T-04 to the netw ork and power the printer On. Euro Support via Command Se quenc es Note: This approach does NOT require that the LX T-04 has been updated with the firmware K12-8491 or g reater. This is because the s ubstitution of the international currency with the Euro sym bol tak ...

  • Intermate LX T-04 - page 71

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 7 1 F. T echnical S pecification s Supported Pri nters L ex m ar k 23xx Plus L ex m ar k 4227 L ex m ar k 4227 Plus Attachments IBM S y ste m /34. IBM S y ste m /36. IBM S y ste m /38. IBM S y ste m AS/400. IBM 5259 Mi g ration Data L in k . IBM 5294 Control Unit. IBM 5394 Control Unit. IBM 5251 Mod ...

  • Intermate LX T-04 - page 72

    A p p e n d i c e s 72 U s e r ‘ s G u i d e IBM Printer Emu lation IBM 4214 m odel 2(default). IBM 5256 m odel 1,2 and 3. IBM 5224 m odel 1 and 2. IBM 5225 m odel 1,2,3 and 4. IBM 4230 m odel 101. IBM Sy stem Featu res SCS and FFT Data stream . Page Presentation Media. Cut Sheet Feeder Comm and. PC/Support Virtual Printer. Multiple Bin Support. ...

  • Intermate LX T-04 - page 73

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 73 Intermate LX T-04 Additional Features Configuration from a Term inal or from the Sy stem . Editable Character Translation Table. 10 User Definable Strings. Program m able Transparency Function (data pass-throug h). Predefined P rinter Drivers fo r all m ajor ASCII printers , fully editable. Bar C ...

  • Intermate LX T-04 - page 74

    A p p e n d i c e s 74 U s e r ‘ s G u i d e ...

  • Intermate LX T-04 - page 75

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 7 5 G. Relate d Public ations Title Part Nu m ber IBM Sy s te m / 36 Fun c t i ons Referen c e Guide S A-21-9436-05 IBM AS/ 400 Gui de t o Progra mm ing for P rinting S C21-8194-0 IBM AS/ 400 P rinting GG24-3452-00 IBM AS/ 400 P rogra mm ing: Advan c ed P rinter Fun c ti on Gui de S C21-9668-0 IB M ...

  • Intermate LX T-04 - page 76

    A p p e n d i c e s 76 U s e r ‘ s G u i d e ...

  • Intermate LX T-04 - page 77

    A p p e n d i c e s I n t e r m a t e L X T - 0 4 7 7 H. Customer Support If y ou cannot f ind answers in this g uide about usin g the Inter m ate L X T - 04, please contact y our point of purchase, y our local L ex m ar k o ff ice, or call the L ex m ar k Technical Support line. North America: L ex m ar k International, Inc. 740 New Circle Road L ...

  • Intermate LX T-04 - page 78

    A p p e n d i c e s 78 U s e r ‘ s G u i d e ...

  • Intermate LX T-04 - page 79

    I n d e x I n t e r m a t e L X T - 0 4 79 Index A About this guide ............. 9 Additional IBM 4214 feature . . 72 A d d r e s s S w i t c h ............ 5 7 A d v a n c e d f u n c t i o n s ......... 2 5 A p p e n d i c e s ................ 4 9 A p p r o v a l s E M C ............ 7 3 A S C I I c h a r a c t e r s e t ......... 5 1 A S C I I ...

  • Intermate LX T-04 - page 80

    I n d e x 80 U s e r ‘ s G u i d e I IBM Printer Emulation ................. 12, 21, 51, 72 I B M s y s t e m f e a t u r e s ........ 7 2 I n c o r r e c t h o s t p r i n t o u t s ...... 4 2 I n s t a l l a t i o n ................ 1 3 Interm ate LX T-04 additional f e a t u r e s ................... 7 3 Introduction ............... 1 1 K K e ...

  • Intermate LX T-04 - page 81

    I n d e x I n t e r m a t e L X T - 0 4 81 SYSTEM indicator ........... 14, 16, 42, 45, 57, 67 S y s t e m L a n g u a g e ........ 22, 50 T T e c h n i c a l s p e c i f i c a t i o n s ...... 7 1 T e s t M o d e ............. 57, 58 t e s t p r i n t o u t ............... 1 4 T h e o r y o f o p e r a t i o n ......... 1 1 T r a d e m a r k c r e ...

Manufacturer Intermate Category Network Card

Documents that we receive from a manufacturer of a Intermate LX T-04 can be divided into several groups. They are, among others:
- Intermate technical drawings
- LX T-04 manuals
- Intermate product data sheets
- information booklets
- or energy labels Intermate LX T-04
All of them are important, but the most important information from the point of view of use of the device are in the user manual Intermate LX T-04.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Intermate LX T-04, service manual, brief instructions and user manuals Intermate LX T-04. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Intermate LX T-04.

Similar manuals

A complete manual for the device Intermate LX T-04, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Intermate LX T-04 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Intermate LX T-04.

A complete Intermate manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Intermate LX T-04 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Intermate LX T-04, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Intermate LX T-04, that we can find in the current document
3. Tips how to use the basic functions of the device Intermate LX T-04 - which should help us in our first steps of using Intermate LX T-04
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Intermate LX T-04
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Intermate LX T-04 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Intermate LX T-04?

Use the form below

If you did not solve your problem by using a manual Intermate LX T-04, ask a question using the form below. If a user had a similar problem with Intermate LX T-04 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)