English dropdown-ico

Manual Clover Electronics CDR0850

162 pages 7.84 mb
Download

Go to site of 162

Summary
  • Clover Electronics CDR0850 - page 1

    Contents 1 INSTRUCTION MANUAL S t and-Alone 8 Channel DIGIT AL VIDEO RECORDER MODEL CDR0850 Copyright © 2007 Clover Electronics U.S.A. All Rights Reserved. ...

  • Clover Electronics CDR0850 - page 2

    2 ...

  • Clover Electronics CDR0850 - page 3

    Contents CONTENTS ABOUT THIS MANUAL ............................................................... ........................................................... 9 UNPACK ING ............................................................... ............................................................... ........... 11 S TA N D - ALONE DVR (D IGIT AL V ...

  • Clover Electronics CDR0850 - page 4

    Stand-alone DVR In struction Manual 6-6.2. SPLIT SCREENS ........................................................................................................................ 40 6-7. LIVE ............................................................................................................................... ..... 41 6-7.1. FULL SCREEN ... ...

  • Clover Electronics CDR0850 - page 5

    Contents 7-2.1. TIME / DA TE ............................................................................................................................... 76 7-2.2. SYSTEM CONFIG ...................................................................................................................... 78 7-2.2.1. F ACTORY DEF AUL T ................... ...

  • Clover Electronics CDR0850 - page 6

    Stand-alone DVR In struction Manual 7-6.8.2. Manual Event Recording .................................................................................................... 105 7-6.8.3. T imer Recordin g (Schedule Recording) ............................................................................. 105 7-6.8.4. T imer Event Recording ............... ...

  • Clover Electronics CDR0850 - page 7

    Contents 9-2. I NST ALLA TION OF AN ADDITIONAL HDD .................................................................................. 151 APPENDIX ............................................................... ............................................................... ............. 153 R ECORDING TIME T ABLE .................................. ...

  • Clover Electronics CDR0850 - page 8

    Stand-alone DVR In struction Manual 8 ...

  • Clover Electronics CDR0850 - page 9

    About this manual This is the Instruction Manual for S tand -alone type DVR model CDR0850 . This Manual describe s how to install and operate the S tand-A lone DVR and provid es specifications and features. Please read this m anual thoroughly and follow the inst allation process before u sing S tand- alone DVR (Note: Be sure to correctly follow ste ...

  • Clover Electronics CDR0850 - page 10

    Stand-alone DVR In struction Manual 10 ...

  • Clover Electronics CDR0850 - page 11

    1 Unpacking Care should be t aken when unpacking to avoid dama ging the unit. Please check that the following items are included: ▶ S tand-alone DVR unit ▶ All Accessories : Bracket, Power Cable, Screws ▶ Remote Controller & Battery ▶ PS2 Mouse ▶ DSUB 26p Connector (Sensor Input, Relay Output Selection) ▶ Instruction Manual ▶ Host ...

  • Clover Electronics CDR0850 - page 12

    Stand-alone DVR In struction Manual Stand-alone DVR (Digital Video Recorder) Unit CDR0850 is the most reliable and fun ctional embedd ed DVR system available today . The system displays 8 channels of live images in Re al T ime speed, compresses dat a digitally and records them to the Hard Disk Drive, which can be replayed and se arched easily any t ...

  • Clover Electronics CDR0850 - page 13

    Features ▶ Multi Functional Record -Powerful, multiple Record Modes availabl e: Man ual (Continuous), T imer , and Motion Detection Recording. ▶ User friendly GUI -A few simple buttons for Easy control. ▶ Automatic System Re cov ery -Automatic and Complete System recov ery within 10 secon ds. ▶ Easy PTZ control via RS port -No need to use P ...

  • Clover Electronics CDR0850 - page 14

    Stand-alone DVR In struction Manual 14 ...

  • Clover Electronics CDR0850 - page 15

    3 What to do at the time of Installation St and-alone DVR should be inst alled in the follo w ing order; 1. Make sure all the requi red hardware is available. - S tand-alone DVR unit (including HDD) - Up to 8 cameras (includi ng power source) - CCTV or VGA monitor (or TV set) - Network cable if connecting to a PC 2. Connect the cameras, the DVR uni ...

  • Clover Electronics CDR0850 - page 16

    Stand-alone DVR In struction Manual 16 ...

  • Clover Electronics CDR0850 - page 17

    4 Specifications IT E M Televisi on System NTSC PAL Refresh Rate 60 fields/sec 50 fields/sec Video Resolution 720x480 720x576 Video Inputs Video Input Signal Video Outputs Video Output Signal Live 240 Frames/sec display 200 Frames/sec display Zoom Sequence Displa y Format Video enhance VGA enhance AUD IO FEATU RES G.723 Recording Speed 240 Frames/s ...

  • Clover Electronics CDR0850 - page 18

    Stand-alone DVR In struction Manual 18 ...

  • Clover Electronics CDR0850 - page 19

    5 Installation CONTENTS 5-1. C ONTROLS AND C ONNECTORS (F OR 8C H & 16C H DVR) .........................................................20 5-2. N OTE FOR I NST ALLA TION ........................................................................................................22 5-3. S YSTE M C ONNECTION ........................................... ...

  • Clover Electronics CDR0850 - page 20

    Stand-alone DVR In struction Manual 5-1. Controls and Connectors (For 8Ch & 16Ch DVR) z Front [Fig 5-1. Front View] JOG SHUTTLE HDD LED LINK LED DATA LED IR Reciver DVD R/W USB POWER B A - A a. 1 Channel(FULL Screen) b. 2 Channel(FULL Screen), UP Key c. 3 Channel(FULL Screen) d. 4 Channel(FULL Screen) e. 5 Channel(FULL Screen), LEFT Key f. 6 Ch ...

  • Clover Electronics CDR0850 - page 21

    5. Installa tion - B a. Display (Full / S plit) b. Emergency Record c. Zoom d. Quick Replay e. OSD On/Off f. Audio g. S top (ESC) h. PTZ z Rear MOUSE RS - 422C PORT USB PORT ETHERNET VGA SPEAKER AUDIO INPUT S - VHS SENSOR VOLTAGE POWER INLET MAIN VIDEO AUX VIDEO L OOP OUT CAMERA [Fig 5-2. R ear View] 21 ...

  • Clover Electronics CDR0850 - page 22

    Stand-alone DVR In struction Manual 5-2. Note for Installation  Install the sy stem according to the instructions describ ed in this manual.  This product i s designed for indoor use a nd should not be used out doors.  A void any area with high humidity or dust which can shorten lifetime of the unit.  Choose a well ventilated area and k ...

  • Clover Electronics CDR0850 - page 23

    5. Installa tion 5-3. System Connection [Fig 5-3. System Connection] 23 ...

  • Clover Electronics CDR0850 - page 24

    Stand-alone DVR In struction Manual 5-4. Installation 5-4.1. Camera Connection ▫ Connection of Normal Camer as Connect the cameras to the V ideo Input (BNC co nnector) on the back of the unit as shown above [Fig. 5-3 System Connection]. ▫ Connection of Loop Outpu t The Camera or video output is available from the V ideo Output (Loop Output) on ...

  • Clover Electronics CDR0850 - page 25

    5. Installa tion ▫ VGA Monitor Connection Connect the VGA Monitor ’ s connector to the “DSUB 15 Pin Connector” on the rear of the unit. Output for VGA Monitor is the same a s that of the main screen, however it output s a better quality signal. Pin configuration of VGA Connector. [Fig 5-5. VGA Connector PIN] - Number Description Numb er Des ...

  • Clover Electronics CDR0850 - page 26

    Stand-alone DVR In struction Manual - 5-4.3. Sensor Connection and RELA Y IN &OUT ▫ SENSOR Connection (S ENSOR IN) Connect the sensor to ALM (SENSOR) IN. The Sensor should be a cont actor type and support NO (Normal Open). Refer to [Fig. 5-6 SENSOR IN/OUT PIN] for connection. [Fig 5-6. SENSOR IN/OUT PIN] ▫ RELAY OUT Connection When necessar ...

  • Clover Electronics CDR0850 - page 27

    5. Installa tion 5-4.4. RS232C Connection ▫ Connect the cable to the “RS232C PORT” o n the rear of the unit. Specification of the RS232C conne ctor is standard for “DSUB9” The Maximum Length of cable is 45 ft. When you want to use a longer distance, use “RS323 to RS422” converter Refer to [Fig 5-8], [Fig 5-9], [Fig 5-10] for connectio ...

  • Clover Electronics CDR0850 - page 28

    Stand-alone DVR In struction Manual 5-4.5 Connection to an Ethernet (Optional) Net w ork ▫ Connecting the cable to Ethernet. Our Ethernet connector is a RJ45 type. The maximum cable lengt h is 300 ft. When you want to use a longer cable, we sug gest using repeater . Refer to [Fig. 5-1 1] for connector pin configuration. [Fig 5-11] 28 ...

  • Clover Electronics CDR0850 - page 29

    5. Installa tion 5-4.6. POWER CONNECTION Select proper voltage (see fig 5-12) and con nect to a reliable power source. It should not be shared with other ele ctrical equipment on the same line. Poor performance can occur if the co nnected voltage is more than 10% plu s or minus the required voltage. Frequent power cut s can cause crucial failures, ...

  • Clover Electronics CDR0850 - page 30

    Stand-alone DVR In struction Manual 30 ...

  • Clover Electronics CDR0850 - page 31

    6 How to operate CONTENTS 6-1. G ENERAL I NFORMA TION .........................................................................................................33 6-2. O PERA TING I NTERF ACE ..........................................................................................................34 6-3. IR R EMOTE C ONTROLLER ...................... ...

  • Clover Electronics CDR0850 - page 32

    Stand-alone DVR In struction Manual 32 CONTENTS 6-7. LIVE ............................................................................................................................... ......41 6-7.1. FULL SCREEN ........................................................................................................................... 41 6-7.2. SP ...

  • Clover Electronics CDR0850 - page 33

    6. How to Oper ate 6-1. General Information ▫ Y ou can operate all functions of the system by use of the 28 b uttons located on the front panel, remote controller a nd a mouse. Additionally , you can remotely control this unit via RS422C or the Ethernet port located on the back of th e unit. ▫ System status is indicate d by either LED lights on ...

  • Clover Electronics CDR0850 - page 34

    Stand-alone DVR In struction Manual 6-2. Operating Interface There are 3 ways to operate the system by pressing the buttons on the front p anel or buttons on the remote controller and clicki ng the mouse. A lot of users mostly prefer to use a mouse on these kinds of product s such as DVRs, co mputers and computer-aid ed devices. Therefore we like t ...

  • Clover Electronics CDR0850 - page 35

    6. How to Oper ate 6-3. IR Remote Controller 1. Record 2. Power On/Off 3. Display format (Split) 4 . S y s t e m s t a t u s 5. Pan / Tilt 6. Zoom / Focus 7. Search f or replaying 8. Up 9. Quit 10. Left 11. Enter 12. Right 13. Quick Replay 14. Down 15. Menu (Setup) 16. OSD On/Off 17. Zoom 18. Freeze / IR ID Config 19. No.1~8 Channel (Full Screen) / ...

  • Clover Electronics CDR0850 - page 36

    Stand-alone DVR In struction Manual 6-4. Power On/Off 6-4.1. POWER ON On the front p anel or the remote controller: Press the POWER button on the front panel for ap prox . 3 seconds until the LED light s are turned on or just press the POWER button on the re mote controller . 6-4.2. POWER OFF On the front p anel or the remote controller: Press the ...

  • Clover Electronics CDR0850 - page 37

    6. How to Oper ate 6-4.3. APPEARANCE OR DISA PPEARANCE OF POWER BUTTON The Power On/Of f button and the Audio buttons (S ee 6-7.4) as sho wn in Fig.6-3-1 will always stay on the ME NU bar when the syst em is not co nnected through the SmView er (Client Host Program or Internet Explorer). But the Po wer On/Off button and th e Audio buttons on the ME ...

  • Clover Electronics CDR0850 - page 38

    Stand-alone DVR In struction Manual 6-5. Menu Bar On/Off Right-click on the screen in the LIVE or the RECORD mode an d the MENU bar will be appeared. Right-click agai n and it will be disappeared. CLICK CLICK [Fig.6-4 LIVE Screen] 38 ...

  • Clover Electronics CDR0850 - page 39

    6. How to Oper ate 6-6. Display Screen 6-6.1. FULL SCREEN [Fig.6-5 FULL screen] CAMERA AUDIO COPY CURRENT RECORD SEQUENCE 39 ...

  • Clover Electronics CDR0850 - page 40

    Stand-alone DVR In struction Manual 6-6.2. SPLIT SCREENS FULL SCREEN SEQUENCING SCREEN [4B] 2nd QUAD SCREEN [ 4A ] 1st QUAD SCREEN 8 SPLIT SCREEN 40 ...

  • Clover Electronics CDR0850 - page 41

    6. How to Oper ate 6-7. LIVE 6-7.1. FULL SCREEN ▫ Full SCREEN is available in the LIVE mode or the RECORD mode. ▫ Click on a certain camera’s screen in the LIVE mode or in the RECO RD mode, and a FULL SCREEN will be displayed. ▫ Click the FULL screen to re turn to the SPLIT SCREEN. 6-7.2. SPLIT SCREEN ▫ SPLIT SCREEN is available in the LI ...

  • Clover Electronics CDR0850 - page 42

    Stand-alone DVR In struction Manual 6-7.3. SEQUENCING SCREENS ▫ Displaying the cameras in SEQUENCE is available in the LIVE mode or the RECORD mode. Each of the channels will be displayed i n sequence and the dwell time can be adjusted in the camera set up menu (Refer to 7-4.7 ). ▫ This ICON is displayed on the upper l eft hand corner of the sc ...

  • Clover Electronics CDR0850 - page 43

    6. How to Oper ate 6-7.4. LIVE AUDIO ▫ If cameras (up to 4 cameras) have audio function, it will sound in t he live mode. ▫ Click the CHANNEL button you wish to lis ten on the MENU bar as sho wn below (See Fig.6-9). The CHANNE L can be changed by clicking the mouse repeatedly. ▫ Turn the AUDIO (speaker) ON by clicking the SPEAKER icon as show ...

  • Clover Electronics CDR0850 - page 44

    Stand-alone DVR In struction Manual 6-7.5. ZOOM The image on the screen will be zoomed up to 2 times when the ZOOM button is clicked in the LIVE mode (This function is available on the full screen mo de only). ▫ Click the ZOOM button on the MENU bar in the LIVE mode. ▫ Move the mouse on the ZOOMED screen, and the 8-directio nal arrow marks will ...

  • Clover Electronics CDR0850 - page 45

    6. How to Oper ate 6-7.6. OSD ON / OFF OSD ON /OFF is possible in the LIVE mode or RECORD mode. ▫ Click the OSD button on the MENU bar to turn the OSD (On Screen Display) ON o r OFF. When the OSD is in OFF position, all the texts on the screen w ill be disappeared. CAM 01 CAM 02 CAM 03 CAM 01 CAM 02 CAM 03 CAM 01 CAM 02 2007/05/25 19:30: 41 [Fig. ...

  • Clover Electronics CDR0850 - page 46

    Stand-alone DVR In struction Manual 6-7.7. PAN / TILT ▫ Click the PAN/TILT button on the MENU bar in the LIVE mode to access the PAN/TILT cameras. ▫ Click the (EXIT) button to return to the LIVE mode. [Fig.6-13 PAN/TILT button] [Fig.6-14 PAN/TILT window] 46 ...

  • Clover Electronics CDR0850 - page 47

    6. How to Oper ate PAN / TILT CHANNEL ZOOM / FOCUS [Fig.6-15 PAN/TILT CONTROL window] ▫ Channel Selection and Screen Conversion To change a channel, press the CHANNEL button on the front panel or click the CHANNEL button on the [Fig.6-15 PAN /TILT CONTROL window]. It will be converted a full screen. To return to the LIVE mode, press the SPLIT but ...

  • Clover Electronics CDR0850 - page 48

    Stand-alone DVR In struction Manual 6-7.8. SYSTEM STATUS ▫ Click the SYSTEM STATUS button on the ME NU bar to see the system status as shown below (Fig.6-16). ▫ Click the (EXIT) button to return to the LIVE mode or RECORD mode. [Fig.6-16 SYSTEM STATUS button] [Fig.6-17 SYSTEM STATUS window] 48 ...

  • Clover Electronics CDR0850 - page 49

    6. How to Oper ate 6-7.9. POWER LOSS LISTS The list indicates the time/date when the system p ower is turned OFF. ▫ Click the POWER LOSS LISTS button on the SYSTEM STATUS window to view the POWER LOSS LISTS. ▫ Each of the pages contains 10 list s. You c an search the pages by clicking the UP/DOWN button. ▫ Click the (EXIT) button to return to ...

  • Clover Electronics CDR0850 - page 50

    Stand-alone DVR In struction Manual ▫ CLEAR LISTS button Click the CLEAR LISTS button to clear the lis ts, you will be prompted to confirm chang es. When you click the OK button, the POWER LOSS LISTS will be deleted. T o cancel, click t he CANCEL button Fig.6-19 POWER LOSS LISTS Message 50 ...

  • Clover Electronics CDR0850 - page 51

    6. How to Oper ate 51 6-7.10. VIDEO LOSS LIST The list indicates the video loss chann el and the time/date when the video signal is disconnected. ▫ Click the VIDEO LOSS LISTS button on the SYSTEM STATUS window to view the VIDEO LOSS LISTS. ▫ Each of the pages contains 4 lists. You can search the pages by clicking the UP/ DOWN button. ▫ Click ...

  • Clover Electronics CDR0850 - page 52

    Stand-alone DVR In struction Manual ▫ CLEAR LISTS button Click the CLEAR LISTS button to clear the lis ts, you will be prompted to confirm chang es. When you click the OK button, t he VIDEO LOSS LISTS will be deleted. T o cancel, click t he CANCEL button [Fig.6-22 VIDEO LOSS LISTS Me ssage window] 52 ...

  • Clover Electronics CDR0850 - page 53

    6. How to Oper ate 6-8. Record This system provides W atchdog function. When power goes of f during record ing and the power turns on, the system will automatically start to record. 6-8.1. Manual (Continuou s) reco rding ▫ Click the SETUP icon on the MENU bar i n the LIVE mode. ▫ Click the RECORD b utton in the SETUP menu and the RECORD wind ow ...

  • Clover Electronics CDR0850 - page 54

    Stand-alone DVR In struction Manual The MOTION ( ) and SENS OR ( ) as shown in Fig.6-24 sho uld be turned ON in this recording mode. ▫ Press the RECORD button on the front panel o r click the RECORD icon on the MENU bar . [Fig.6-24 Manual Event Recording setup] 6-8.3. Timer Recording ▫ Click the SETUP icon on the MENU bar i n the LIVE mode. ▫ ...

  • Clover Electronics CDR0850 - page 55

    6. How to Oper ate 6-8.4. Timer Event Recording ▫ Click the SETUP icon on the MENU bar i n the LIVE mode. ▫ Click the RECORD b utton in the SETUP menu and the RECORD wind ow will be displayed. ▫ Select the TIMER RECORDING ( ) between the MANUAL RECORDING ( ) and the TIMER RECORDING ( ) as shown in Fig.6-26. All channel s can be set at the sam ...

  • Clover Electronics CDR0850 - page 56

    Stand-alone DVR In struction Manual 6-8.5. Recording Icons The Recordin g Icons depends on re cording modes ar e displayed on the upper lef t hand corner of the screen. ▫ To turn the Recording Icon OFF, click th e DISPLAY ON in the RECORD menu and then it will be turned OFF. You can select the value ON or OFF by repeatedly clicking the mouse. Man ...

  • Clover Electronics CDR0850 - page 57

    6. How to Oper ate 6-9. REPLAY 6-9.1. QUICK REPLAY It is available only by pressing the PLAY bu tton on the front panel or the QICK SEARCH button on the remote controller. ▫ Press the PLAY button, and the rec ent recorded list will be played . 6-9.2. REPLAY ▫ Click the REPLAY icon on the MENU bar, and the REPLAY window as shown in Fig.6-29 will ...

  • Clover Electronics CDR0850 - page 58

    Stand-alone DVR In struction Manual 6-9.2.1. Playback Devices In order to payback, plug the USB devices such as external USB HDD, USB memory to the USB port or insert a recorded media (CD-R/W or DV D-R/W) into the DVD-R/W drive. When the devices are ready to playback, the Ready on the corresponding devices will be displayed in shown in Fig.6-30. ? ...

  • Clover Electronics CDR0850 - page 59

    6. How to Oper ate ▫ Select the hour on the S tar t T ime Select Wi ndow (See Fig.6-32) by clicking the mouse on the Hour (0 – 23 hour) you wish to st art to play . The green active buttons indicate the HOUR t hat recorded dat a exists, and the red active buttons indicate the selected S tart HO UR. [Fig.6-32 St art Tim e Select window] By using ...

  • Clover Electronics CDR0850 - page 60

    Stand-alone DVR In struction Manual 6-9.2.3. Replaying Replaying st art time set-up can be possible within a recording time extent. ▫ Replay buttons (NORMA L / MOTION / SENSOR) NORMAL PLAY: Click the button to play all the record ed data. MOTION PLAY: Click the button to play the recorded data by MOTION only. SENSOR PLAY: Click the button to play ...

  • Clover Electronics CDR0850 - page 61

    6. How to Oper ate ▫ How to control while replaying ③ ④ ② ④ ③ ⑤ ⑥ ① [Fig.6-35 Replay screen] ① Search Slider It is possible to playback by clicking the slider on the bar and dragging it. ② PLA Y / P AUSE Click the button to pause. Click the button to replay when in the pause mode. ③ REW/FF During replaying, press the or butt ...

  • Clover Electronics CDR0850 - page 62

    Stand-alone DVR In struction Manual the button to view the next frame in still image. ⑤ S peaker ON / OFF Turn speaker ON or OFF. ⑥ S peaker V olume Adjust the Audio Volume by clicking the ▲ or the ▼ button when the AUDIO i s turned ON. 6-9.2.4. Disappearance of Replay control buttons During replaying, the replay control butt ons appear on ...

  • Clover Electronics CDR0850 - page 63

    6. How to Oper ate - Click the mouse on one out of channels during replaying to view a full screen. - Click the mouse on the full screen during replaying to return to the split screen. [Fig.6-36 SPLIT screen during replaying] [Fig.6-37 FULL screen during replaying] 63 ...

  • Clover Electronics CDR0850 - page 64

    Stand-alone DVR In struction Manual 6-10. COPY ▫ Click the COPY icon on the MENU b ar, and the COPY window as shown in Fig. 6-38 will be displayed. ▫ Click the (EXIT) button to return to the previous mode. [Fig.6-38 COPY window] 6-10.1. Copying devices In order to copy the recorded dat a, plug the USB devic es such as external USB HDD, USB memo ...

  • Clover Electronics CDR0850 - page 65

    6. How to Oper ate ▫ Connect the USB devices to the DVR ▫ Click the SETUP icon on the MENU b ar, and the SETUP menu will be displayed. ▫ Click the DISK MANAGER in the SETUP menu, and the DISK MENAGER will be displayed. ▫ Click the mouse on the USB button in t he DISK MANAGER, and you will be asked. ▫ Click the OK, and then the progre ssiv ...

  • Clover Electronics CDR0850 - page 66

    Stand-alone DVR In struction Manual [Fig.6-40 Copy St art time and Channel Selection window] ③ channel selection ② H OUR selection butt on ① All channel s HOUR selection ① All channels, HOUR selection button. Click the arrow button on the upper lef t corner as shown in Fig.6-40 to set the full extent of the recording and all the channels si ...

  • Clover Electronics CDR0850 - page 67

    6. How to Oper ate [Fig.6-41 Copy St art/End setup buttons] By using the S t art/End set-up bar: The starting ti me to copy can also be set by clicki ng the slider on the bar and dr agging it or just click the bar . [Fig.6-42 Copy St art/End setup bar] 6-10.3. Set the Copy End Time (Copying extent) Refer to the above expla nation (See sect ion 6.10 ...

  • Clover Electronics CDR0850 - page 68

    Stand-alone DVR In struction Manual 6-10.4. Copying the recorded data during replaying The system, CDR0850 allows users to copy the re corded data during replaying. ▫ Start replaying (See section 6-9). ▫ Right-click on the replaying screen, and t he COPY DATA screen wil l be displayed (See Fig.6-43). ▫ To set the starting time and date to cop ...

  • Clover Electronics CDR0850 - page 69

    6. How to Oper ate [Fig.6-44 End Copy Time Setup window] ▫ Choose one among NETWORK, USB, CD and DV D which are ready to copy (See se ction 6-10.1). Select COPY Mode Only when the devices and medias are ready to copy , the Read y o n the co rresponding devices and medias will be displayed. NETWORK COPY Save the recorded data in PC through the SmV ...

  • Clover Electronics CDR0850 - page 70

    Stand-alone DVR In struction Manual DVD-RW COPY Save the recorded data on DVD-R/W Medias. Click the DVD-R/W button to start copy. ▫ As soon as one of the above button is clicke d , copy ing will start along with displaying the icon shown in Fig.6-45. The following icon indicate s that copying is in process. [Fig.6-45 Copying Icon] 70 ...

  • Clover Electronics CDR0850 - page 71

    7 SETUP CONTENTS 7-1. SETUP ............................................................................................................................... ..74 7-2. SYSTEM ..............................................................................................................................7 5 7-2.1. TIME / DA TE ........................... ...

  • Clover Electronics CDR0850 - page 72

    Stand-alone DVR In struction Manual 72 CONTENTS 7-4. CAMERA .............................................................................................................................88 7-4.1. Camera ON/OFF ........................................................................................................................ 89 7-4.2. Camera Nam ...

  • Clover Electronics CDR0850 - page 73

    7. Setup 73 CONTENTS 7-7. NETWORK ........................................................................................................................ 1 17 7-7.1. IP Mode .....................................................................................................................................1 17 7-7.2. GA TEW A Y , SUBNET , IP ADDRE ...

  • Clover Electronics CDR0850 - page 74

    Stand-alone DVR In struction Manual 7-1. SETUP [Fig.7-1 Setu p Icon on MENU bar] It is possible to set up the menus in the LIVE mode and partly in the RECORD mode. ▫ Click the “SETUP” button on the MENU bar and the SETUP menu will be displ ayed. ▫ Click the “EXIT” button to return to the previous mode. [Fig.7-2 SETUP menu] 74 ...

  • Clover Electronics CDR0850 - page 75

    7. Setup 7-2. SYSTEM ▫ Click the “SYSTEM” button in the SETUP m enu, and the SYSTEM menu shown in Fig.7-3 will be displayed. ▫ Click the “EXIT” button to return to the SETUP menu. . [Fig.7-3 SYSTEM menu] 75 ...

  • Clover Electronics CDR0850 - page 76

    Stand-alone DVR In struction Manual 7-2.1. TIME / DATE ▫ Click the “TIME/DATE” button in the SYSTEM menu, and the TIME/DATE menu will be displayed (See Fig.7-4). ▫ Click the “EXIT” button to return to the SYSTEM menu. [Fig.7-4 TIME / DATE menu] ▫ TIME FORMAT Click the mouse on the TIME FORMAT button to change and the n select 24 HOUR ...

  • Clover Electronics CDR0850 - page 77

    7. Setup ▫ DATE FORMAT There are three formats to display the time and date as follow. • MM / DD / YYYY: For U.S.A. • YYYY / MM / DD: For As ian countries. • DD / MM / YYYY: For European countries. Click the mouse on the DATE FORMAT button to change, and the n select a DATE FORMAT among YYYY/MM/DD, DD/MM/YYYY and MM/DD/YYYY. [Fig. 7-7Date F ...

  • Clover Electronics CDR0850 - page 78

    Stand-alone DVR In struction Manual 7-2.2. SYSTEM CONFIG ▫ Click the “SYSTEM CONFIG” button in the SYSTEM menu, and the SYSTEM CONFIG menu will be displayed (See Fig.7-10). ▫ Click the “EXIT” button to return to the SYSTEM menu. [Fig.7-10 SYSTEM CONFIG] 7-2.2.1. FACTORY DEFAULT ▫ Click the “ FACTORY DEFAU LT ” button in the SYSTEM ...

  • Clover Electronics CDR0850 - page 79

    7. Setup [Fig.7-12 Confirmation window of Factory Default] 7-2.2.2. LOAD CONFIG / BACKUP CO NFIG You can save up to four different settings in the BACKUP CONFIG and load the files in the LOAD CONFIG to change the settings to the system. ▫ LOAD CONFIG This function is to load the changed setti ngs to the system. - Click the LOAD CONFIG button and ...

  • Clover Electronics CDR0850 - page 80

    Stand-alone DVR In struction Manual [Fig.7-14 LOAD CONFIG window] ▫ BACKUP CONFIG This function is to save the current settings to load the settings to the system. Save the current settings in the BACKUP CONFIG in orde r to load it to the system in the near future whenever you change the setting s. - Click the BACKUP CONFIG button and the BACKUP ...

  • Clover Electronics CDR0850 - page 81

    7. Setup [Fig.7-16 BACKUP CONFIG wind ow] 81 ...

  • Clover Electronics CDR0850 - page 82

    Stand-alone DVR In struction Manual 7-2.3. PASSWORD ▫ ON/OFF Select ON or OFF by clicking the mouse. If the ON is selected, the password has to be entered to get into the SETUP mode, RECORD mode, COPY mode, REPLAY mode, and when trying to connect the network through the SmViewer . ▫ PASSWORD CHANGE Click the password “********” button an d ...

  • Clover Electronics CDR0850 - page 83

    7. Setup 83 7-2.4. IR REMOTE ID Up to 16 DVR systems ca n be controlled by only one remote controller we provided, but IDs should be assigned on e ach of the systems. Y ou don’t have to assign any ID on the single unit and you can control the system with the pr ovided remote controller without IR REMOTE ID, which is in the OFF mode (Skip this sec ...

  • Clover Electronics CDR0850 - page 84

    Stand-alone DVR In struction Manual 7-2.5. FIRMWARE UPDATE There are two ways to update the firmware through USB memor y and the SmViewer (GUI). We recommend users to update the firmware only in the LIVE mode. ▫ By USB memory - Format the USB with your computer and save the firmware file on it (not including folder). - Plug it on the USB port on ...

  • Clover Electronics CDR0850 - page 85

    7. Setup 7-3. DISK MANAGER ▫ Click the “DISK MANAGER” button in t he SETUP menu and the DISK MANAGER window will be displayed (See Fig.7-22). ▫ Click the (EXIT) button to return to the SETUP menu. ▫ A DVD R/W and 3 Hard Disk Drives can be inst alled, and all inf ormation in regards to the drives will automatically disp lay on the DISK MAN ...

  • Clover Electronics CDR0850 - page 86

    Stand-alone DVR In struction Manual 7-3.1. HDD WRITE FAIL If HDD is in full and the OVERWRITE on the HDD is turned OFF in the recording mode, the system will activate the relay output (See se ction 5-4.3) for a si ren or other device. ▫ Click the HDD WRITE FAIL button in the DISK MANAGER wind ow and select one among RELAY 1 OUT, RELAY 2 OUT, RELA ...

  • Clover Electronics CDR0850 - page 87

    7. Setup [Fig.7-25 HDD FORMAT window] 87 ...

  • Clover Electronics CDR0850 - page 88

    Stand-alone DVR In struction Manual 7-4. CAMERA ▫ Click the “CAMERA” button in the SETUP menu and the CAMERA menu will be displayed (See Fig.7-26). To change the setting s in the CAMERA menu, stop recording by clicking the RECORD icon on the MENU BAR. It is possible only in the LIVE mode. ▫ Click the (EXIT) button to return to the SETUP men ...

  • Clover Electronics CDR0850 - page 89

    7. Setup 7-4.1. Camera ON/OFF ▫ Click on each of the channels to select the “ O ” or “ X ” in the CAMERA menu. If the “ O ” is selected, the correspondin g video channels (CAM 01 through CA M 08) will be displayed on the screen. If the “ X ” is selected, the corresponding video channels (CAM 01 throug h CAM 08) won’t be displaye ...

  • Clover Electronics CDR0850 - page 90

    Stand-alone DVR In struction Manual 7-4.3. Buzzer In order to alert users, the Buzzer will so und at that time video signal lost. ▫ Click on each of the channels you wi sh to turn the buzzer “ON” or “OFF”. If the “ O ” i s selected, the buzzer will sound when video sig nal lost and if the “ X ” is selected, the buzze r won’t sou ...

  • Clover Electronics CDR0850 - page 91

    7. Setup 7-4.5. Pan/Tilt Settings ▫ Click the PAN/TILT button on the correspondi ng channels in the CAMERA menu and the PAN/TILT window will be displayed as shown in Fig. 7-33. ▫ Click the (EXIT) button to return to the CAMERA menu. [Fig.7-32 PAN/TILT button] [Fig.7-33 PAN/TILT window] 91 ...

  • Clover Electronics CDR0850 - page 92

    Stand-alone DVR In struction Manual ▫ Pan/Tilt Vendor select Click the “PAN/TILT & REMOTE” button in t he PAN/TILT window and the vend or lists will show up. Select a vendor on the v endor lists by clicking the mou se. Fig.7-34 PAN/TILT & REMOTE [Fig.7-35 PAN/TILT Vendor lists] ▫ Model Click the “MODEL” button in the PAN/TILT wi ...

  • Clover Electronics CDR0850 - page 93

    7. Setup ▫ Baud rate Click the “BAUD RATE” button in the PAN/TILT win dow and choose a value among 1200bps, 2400bps, 4800 bps, 9600bps, 19200bp s, 38400bps, 57600bps a nd 115200bps on the Baud Rate pop-up window by cli cking the mouse. [Fig.7-38 BAUDRATE button] [Fig.7-39 Baud Rate pop-up window] ▫ Data Bits Click the “DATA BITS” button ...

  • Clover Electronics CDR0850 - page 94

    Stand-alone DVR In struction Manual ▫ Stop Bits Click the “STOP BITS” button in the PAN/TILT window and sele ct 1 or 2 on the Stop Bits pop-up window by clicking the mouse. [Fig.7-42 STOP BITS button] [Fig.7-43 Stop Bits pop-up window] ▫ Parity Bit Click the “PARITY BITS” button in the PAN/TILT window and ch oose a value among NONE, ODD ...

  • Clover Electronics CDR0850 - page 95

    7. Setup 7-4.6 Display ▫ Click the DISPLAY button in the CAMERA m enu and select the ON or OFF. If the “ON” is selected, the camera name (camera title) in the LIVE mode will be displayed on the screen. If the “OFF” is selected, the camera na me (camera title) in the LIVE mode won’t be displayed. [Fig.7-46 Display ON/OFF button] 7-4.7 Se ...

  • Clover Electronics CDR0850 - page 96

    Stand-alone DVR In struction Manual 7-5. AUDIO ▫ Click on the AUDIO button in the SETUP m enu and the AUDIO menu will b e displayed on the screen. ▫ Click the (EXIT) button to return to the SETUP menu. [Fig.7-49 AUDIO menu] 96 ...

  • Clover Electronics CDR0850 - page 97

    7. Setup 7-5.1. Camera Channel ▫ Click the Camera Channel button in the AUDIO menu and select up to 4 cameras among CAM 01 through CAM 08 which has au dio function by clicking the mouse on the camera channel pop-up window. [Fig.7-50 Camera Channel button] [Fig.7-51 Camera Channel pop-up window] 7-5.2. Audio Recording ON/OFF ▫ Click the REC (aud ...

  • Clover Electronics CDR0850 - page 98

    Stand-alone DVR In struction Manual 7-5.3. Microphone Volume ▫ Adjust audio volume by clicking the ▲ or ▼ button. [Fig.7-53 Microphone Volume control button] 98 ...

  • Clover Electronics CDR0850 - page 99

    7. Setup 7-6. RECORD ▫ Click the “RECORD” button in the SETUP menu and the RECORD menu will be displ ayed as shown in Fig.7-54. ▫ Click the (EXIT) button to return to the SETUP menu. [Fig.7-54 RECORD menu] 7-6.1. Record ICON Display ▫ The Recordi ng Icons depends o n recording mode s are displayed on the uppe r left corner of the screen. ...

  • Clover Electronics CDR0850 - page 100

    Stand-alone DVR In struction Manual 7-6.2. All Manual / Timer recording button ▫ Click the All Manual / Timer recording button in the RECORD menu and the All Manual / Timer recording button will be displayed as shown in Fig.7-57. ▫ Select the Manual Recording button o r Time r Recording button for all the channels by clicking the mouse in Fig.7 ...

  • Clover Electronics CDR0850 - page 101

    7. Setup 7-6.3. All Motion ON / OFF, Se nsitivity and Velocity Setting ▫ Click the button in the RECORD menu and the ALL MOTION setup pop -up window will be displayed as shown in Fig.7-59. ▫ By clicking the mouse, select the on the pop-up windo w (See Fig.7-59) to enable the system to start reco rding by motion dete ction for all the channels. ...

  • Clover Electronics CDR0850 - page 102

    Stand-alone DVR In struction Manual 7-6.4. All Sensors ON / OFF ▫ Click the button in the RECORD menu and the ALL SENSOR setup pop -up window will be displayed as shown in Fig.7-62. ▫ By clicking the mouse, select the on the pop-up windo w (See Fig.7- 62) to enable the system to start reco rding by Sensor (Passive Infr ared sensor) for all the ...

  • Clover Electronics CDR0850 - page 103

    7. Setup 7-6.6. Recording Speed ▫ Click the F/S (Frames Per Secon ds: Record ing Speed) button on each of the channels in the RECORD menu and the Recording Speed pop-u p window will be displayed as shown in Fig.7-66. ▫ Select one of the Recording Speed among AUTO , 30, 15, 10, 7, 5, 3, 2, 1 and OFF on the pop-up window by clicking the mouse. ? ...

  • Clover Electronics CDR0850 - page 104

    Stand-alone DVR In struction Manual 30 25 15 12 10 8 7 6 5 5 3 3 2 2 1 1 NTSC OFF PA L OFF [Fig.7-67 Recording Speed for eac h channel] 7-6.7. Recording Quality ▫ Click the QUALITY button on each of t he cha nnels in the RECORD menu and the QUALITY pop-up window will be disp layed as shown in Fig.7-69. ▫ Select one of the Recording Quality am o ...

  • Clover Electronics CDR0850 - page 105

    7. Setup 7-6.8. Recording Mode The factory default setting for Recordin g is the Manual Recording (or called Con tinuous Recording), which keeps recordin g continuously if the OVERWRITE is set ON in the DISK MANAGE menu. This Manual Reco rding mode is not only one of the most popular Recording modes for users, but also one of the most convenient Re ...

  • Clover Electronics CDR0850 - page 106

    Stand-alone DVR In struction Manual 7-6.9. Recording by Motion Detec tion When the menu of motion properly s etup (S ee se ction 7-6.3 on page 101 for all the channels and this section for eac h of the channels) and detec ts motion of objects, the system begins to record automa ticall y. The recording icon on the MENU bar should be selected in this ...

  • Clover Electronics CDR0850 - page 107

    7. Setup ▫ Pre-Alarm Time Setup Allows you to record a section of video just pr ior to Motion or Sen sor activation. Click the mouse on the PRE in the MOTION menu and cho ose one of the values among 0, 1, 2, 3, 4 and 5 seconds with the mouse’s wheel, and then click it to save. [Fig.7-72 Pre-Record Ti m e setup button] [Fig.7-73 Pre-Alarm Time S ...

  • Clover Electronics CDR0850 - page 108

    Stand-alone DVR In struction Manual ▫ Spot Setup If the “ON” is selected by clicki ng the mous e on the SPOT button in the MOTION menu, a full screen will display when a motion is detecte d. If the “OFF” is selected, the full screen won’t be displayed even though motion of object s is detected. [Fig.7-75 Spot Setup button] ▫ Region Th ...

  • Clover Electronics CDR0850 - page 109

    7. Setup - All Clear Click the ALL CLEAR button in the MOTION menu in order to cle ar the Motion Detection Area, and the window turn s to white color as shown in Fig.7-79. Right-click on the current window to return to the MOTION me nu. [Fig.7-78 ALL CLEAR button] CURSOR [Fig.7-79 All Cleared screen] 109 ...

  • Clover Electronics CDR0850 - page 110

    Stand-alone DVR In struction Manual By Window Set Click the WINDOW SET button in the MOTION menu on each of the cameras and click one of cells (330 cells in total) for the starti ng point of the area which you woul d like to designate, and then click th e other one of cells for the ending point of area until the motion detection area is the size yo ...

  • Clover Electronics CDR0850 - page 111

    7. Setup - Window Clear Click the WINDOW CLEAR button in the MOTION m enu in order to clear the Motion Detection Area, and the window you already created the motion detection area will be displayed. Click the starting point and th e ending point as much as you wish to clear or it can be cleared by ALL CLEAR as de scribed above (See ALL CLEAR). Righ ...

  • Clover Electronics CDR0850 - page 112

    Stand-alone DVR In struction Manual By Each Cell Click the EACH CELL button in the MOTION me n u on each of the cameras and click the mouse on each of the cells as much as y ou would like to designat e the Motion Detection Area. To clear, click the designated cell s. Right-click on the current window to return to the MOTION me nu. [Fig.7-84 EACH CE ...

  • Clover Electronics CDR0850 - page 113

    7. Setup ▫ Map View Click the MAP VIEW button in the MOTION menu to view the current settings for Motion detection area. Right-click on the current window to return to the MOTION me nu. [Fig.7-86 MAP VIEW button] Note : Please pay attention to the following directions in order to use the Motion Detection function properly: • Adjust the sensitiv ...

  • Clover Electronics CDR0850 - page 114

    Stand-alone DVR In struction Manual 7-6.10. Recording by Sensor (PIR Sensor) ▫ Click the mouse on the button for each of the channels in the RECORD menu and the SENSOR menu will be displayed on the screen as sho wn in Fig.7-88. ▫ Click the (EXIT) button to return to the RECORD menu. [Fig.7-88 SENSOR window] ▫ ON/OFF The system will start to r ...

  • Clover Electronics CDR0850 - page 115

    7. Setup ▫ Pre-Alarm Time Setup Allows you to record a section of video just prior to Sensor activation. Click the mouse on the PRE in the SENSOR menu and choose one of the value s among 0, 1, 2, 3, 4 and 5 seconds with the mouse’s whe el, and then click it to save. [Fig.7-90 Pre-Alarm Time Setup button] [Fig.7-91 Pre-Alarm Time Setup pop-up wi ...

  • Clover Electronics CDR0850 - page 116

    Stand-alone DVR In struction Manual ▫ Alarm Hold Time Setup The system continues reco rding for the Alarm HOLD TIME and finishes the reco rding. Click the mouse on the HOLD in the SENSOR menu and choose one of the values am ong 1 through 30 seconds with the mouse’s wheel, and then click it to save. [Fig.7-92 Alarm Hold Time Setup button] ▫ Sp ...

  • Clover Electronics CDR0850 - page 117

    7. Setup 7-7. NETWORK ▫ Click the “NETWORK” button in the SE TUP menu and the NETWORK men u will be displayed on the screen as shown in Fig .7-94. ▫ Click the (EXIT) button to return to the SETUP menu. [Fig.7-94 NETWORK menu] 7-7.1. IP Mode ▫ There are two kinds of IP MODE, “DYNAMIC IP” and “STATIC-IP” in the NETWO RK menu. DYNAMI ...

  • Clover Electronics CDR0850 - page 118

    Stand-alone DVR In struction Manual [Fig.7-95 IP Mode button] [Fig.7-96 IP Mode pop-up window] 7-7.2. GATEWAY, SUBNET, IP ADDRESS ▫ Click the GATEWAY / SUBNET / IP ADDRESS button in the STATIC IP MODE and the On Screen Keyboard will appear. ▫ Delete the current values with the button and enter the address numbers by using On Screen Keyboard, an ...

  • Clover Electronics CDR0850 - page 119

    7. Setup 7-7.3. Port ▫ PORT is the TCP address of the program, whic h is used to con nect to the network viewer. It can be set from 1 to 65535 values. ▫ Click the PORT button a nd the On Screen Keyboard will show up. ▫ Delete the curre nt port number with the button and enter the new port number by using On Screen Keyboard, and then click “ ...

  • Clover Electronics CDR0850 - page 120

    Stand-alone DVR In struction Manual 7-7.4. MAC ID ▫ MAC ID is connecting address for Ethern et, every unit has 12 digit address (HEX 6 byte). MAC ID was already assigned with the f actor y default value. User can not change it. 7-7.5. MNS (MAC NAME SERVER) As a sort of DDNS, two servers in our co mpany (CLOVER) are being operated so that our clie ...

  • Clover Electronics CDR0850 - page 121

    7. Setup ▫ IP ADDRESS / PORT DO NOT CHANGE THE IP ADDRESS AND PO RT NUMBER IN THE MNS MENU IF YOU DON’T HAVE ANY SPECIAL SERVER TO AC CESS YOUR DVR WITH A DYNAMIC IP ADDRESS. IF YOU CHANGE THEM, YOU CAN’T NOT ONLY USE OUR MNS (MAC NAME SERVER), BUT ALSO YOUR N E TWO RKING WILL BE DISCO NNE CTED. ▫ SITE NAME The SITE NAME is one of the impor ...

  • Clover Electronics CDR0850 - page 122

    Stand-alone DVR In struction Manual 7-7.6. DDNS (DYNAMIC DOMAI N NAME SYSTEM) ▫ Select the DDNS button in the NETWORK menu by clicking the mouse, pressing the buttons on the front panel or remote controlle r. The DDNS menu will show up as shown in Fig.7-105. ▫ To return to the NETWORK menu, Click the (EXIT) button. ▫ If you were in the middle ...

  • Clover Electronics CDR0850 - page 123

    7. Setup - alues, click on the OK button. ▫ USER ID USER ID in the DDNS menu and enter the USER ID that is registered to the - ▫ PASSWORD SSWORD in the DDNS menu and enter the PASSWORD that is registered - -7.7. HOW TO SETUP AND USE THE DDNS t as a virtual server (or port fo rwarding) in order to utilize the DDNS. There are After changing the v ...

  • Clover Electronics CDR0850 - page 124

    Stand-alone DVR In struction Manual 7-7.7.2. Registration to the DDNS serv er Vis it at www .dyndns.org to register . Registration to DYNDNS.ORG 1. Visit at www .dyndns.com . 2. Sign up for a new user name and a p assword: Click the Create Account on the 3. eck your e- mail and confirm an e-mail from dyndns.com. upper right hand corner . After sign ...

  • Clover Electronics CDR0850 - page 125

    7. Setup 7-8. VIDEO ENHANCE ▫ Click the VIDEO ENHANCE button in the SETUP menu to enhance the pi cture quality on each of channels and VGA OUTPUT such as Brightness, Contrast and Saturation. T he VIDEO ENHANCE menu will show up (See Fig.7-1 10). ▫ To return to the SETUP menu, click the (EXIT) button. [Fig.7-110 VIDEO ENHANCE] 125 ...

  • Clover Electronics CDR0850 - page 126

    Stand-alone DVR In struction Manual 7-8.1. VIDEO ENHANCEMENT ON E A CH CAMERA ▫ Click on an INPUT button in the VIDEO ENHANCE menu. ▫ The CONTRAST an d BRIGHTNESS sliders will be displayed along with camera picture as shown in Fig.7-111. ▫ Adjust Contrast and Brightness with the slide rs by clicking the mouse. ▫ To return to the VIDE O ENHA ...

  • Clover Electronics CDR0850 - page 127

    7. Setup 7 -8.2. VIDEO ENHANCEM ENT ON VGA OUTPUT ▫ Click on the VGA OUTPUT in the VIDEO ENHANCE menu. ▫ The CONTRAST, BRIGHTNESS and SATURATION sliders will be displayed along with camera picture. ▫ Adjust Contrast, Brightness and saturatio n with the sliders by clicking the mouse. ▫ To return to the VIDEO ENHANCE menu, Click the (EXIT) bu ...

  • Clover Electronics CDR0850 - page 128

    Stand-alone DVR In struction Manual 128 ...

  • Clover Electronics CDR0850 - page 129

    129 8 Remote Host Program CONTENTS 8-1. R EMOTE P ROGRAM O VER VIEW .............................................................................................130 8-2. I NST ALLING THE P ROGRAM TO PC ........................................................................................131 8-3. I NTERNET E XPLORER ............................... ...

  • Clover Electronics CDR0850 - page 130

    Stand-alone DVR In struction Manual 8-1. Remote Program Overview The Remote Host Program allows you to view live video, search a rchived video, control PTZ cameras and to set up the exact same menus as the DVR does. The DVR system can have up to 10 simult aneous Remote Con nections. Each user can performs on the DVR system and will not affect t he ...

  • Clover Electronics CDR0850 - page 131

    8. Remote H ost Pr ogram 8-2. Installing the Program to PC Install the program into PC by using program CD (supplied) as follows. How to install the program 1. Start the operating system (Windows 2000/XP). 2. Insert the program CD into CD-ROM drive. 3. Open My Com puter , and then select CD-ROM d rive. 4. Double click Setup.EXE . The software insta ...

  • Clover Electronics CDR0850 - page 132

    Stand-alone DVR In struction Manual 8-3. Internet Explorer When you are trying to use this function, it is highly recommended that the p assword should be turned ON in the SYSTEM menu not to enable unaut horized personnel to access your DVR system (See section 7-2.3 ). Up to 10 users can remotely access your DVR with the HOST NAME. How to setup the ...

  • Clover Electronics CDR0850 - page 133

    8. Remote H ost Pr ogram • Click on the click here on the following message. This site wants to install the following add-on: ‘SmV iewer ’ from ‘Clover Electronics USA ’. If you trust the website and the add-on and want to inst all it, click here …. • Click on the click install ActiveX Control …. on the pop-up screen and the followi ...

  • Clover Electronics CDR0850 - page 134

    Stand-alone DVR In struction Manual 8-4. Remote Host ④ ⑥ ⑤ ③ ② ① [Fig.8-5 SmViewer] 134 Buttons of Remote Host Program ① Player button ② Connectio n button ③ Setup (Config) button ④ ⑤ Full Screen button Speaker / Microphone volume control ⑥ EXIT button ...

  • Clover Electronics CDR0850 - page 135

    8. Remote H ost Pr ogram 8-4.1. Setup ① ② ③ ④ [Fig.8-6 HOST CONFIG window] ① Version nu mber It represents the current version num ber of the Firmware. ② Copy Refer to Section 8-4.5 in regards to co pyi ng methods after selecting one betwee n the Quick Copy and the Live + Copy. ▫ Quick Copy Click on the Quick Copy for fa ster copying ...

  • Clover Electronics CDR0850 - page 136

    Stand-alone DVR In struction Manual ③ Network Image ▫ Size Choose a Size (Re solution) among D1, Half D1 and CIF you wish to display on the SmViewer by clicking the mouse. This setting does not affect the DVR. ▫ Quality Choose one among LOW, NORMAL, HIGH and BEST you wish to display on the SmViewer by clicking the mouse. This setting does not ...

  • Clover Electronics CDR0850 - page 137

    8. Remote H ost Pr ogram 8-4.2. Connection There are two ways to access the DVR through the SmViewer as follows. ▫ With Set Direct setting - Click the “CONNECT” button on the SmV iewer and the SmV iewer will be displayed. - Click the mouse on the “Set Direct” in the Co nne ct Dialog menu and click the “EDIT” button and enter the IP ad ...

  • Clover Electronics CDR0850 - page 138

    Stand-alone DVR In struction Manual 8-4.3. Switch the Normal Screen to Full Screen ▫ Click the “FULL SCREEN” button on the SmVi ewe r and the current screen size will b e enlarged to fit the monitor’s screen size , but the resolution will be lowered. ▫ Click the “FUL L SCREEN” button again to go back to the NORMAL SCREEN. [Fig.8-9 Swi ...

  • Clover Electronics CDR0850 - page 139

    8. Remote H ost Pr ogram 8-4.4. Speaker / Microphone ⑤ ④ ① ② ③ [Fig.8-10 Speaker / Microphone ] Buttons of Remote Host Program ① Audio Input channel selection: Select the same audio cha nnel as the DVR has. ② PC Speaker ON/OFF: Turn the Speaker ON or OFF by clicking th e mouse. ③ PC Microphone ON/OFF: Turn the Micropho ne ON o r OFF ...

  • Clover Electronics CDR0850 - page 140

    Stand-alone DVR In struction Manual 8-4.5. Copy There are four icons such as NETWOR K, USB, CD and DVD in the COPY menu of the SmViewer. The recorded data will be saved in the Backup File s (Open Windows Explorer – click My Computer - click the Program F iles – click StandAlone MPEG4 DVR – click Backup Files) through the NETWORK, but the othe ...

  • Clover Electronics CDR0850 - page 141

    8. Remote H ost Pr ogram [Fig.8-12 C opying on the SmV iwer] [Fig.8-13 Copy Completion] 141 ...

  • Clover Electronics CDR0850 - page 142

    Stand-alone DVR In struction Manual 8-5. PLAYER [Fig.8-14 Player] ⑦ ⑧ ⑩ ⑪ ⑫ ③ ④ ⑤ ⑥ ② ① ⑨ Chart. Button of Play er Program ① Status window (Play mode, Date, Time) ② Calendar ③ Convert to AVI File ④ Search button for replaying ⑤ Capture button ⑥ Print button ⑦ Division button ⑧ Playback (Replay) speed Control ...

  • Clover Electronics CDR0850 - page 143

    8. Remote H ost Pr ogram ① Status windo w (Play mode, Date, Time) It indicates the play mode, date and time. [Fig.8-15 Status window] ② Calendar It shows the date cu rrently being replayed. [Fig.8-16 Calendar] ③ Convert AVI File Convert the recorded files to AVI files. - Click the Convert AVI button on the Player and the Convert AVI window wi ...

  • Clover Electronics CDR0850 - page 144

    Stand-alone DVR In struction Manual [Fig.8-17 Convert AVI window] [Fig.8-18 Backup Files by Networking] [Fig.8-19 DvrRecData by USB] 144 ...

  • Clover Electronics CDR0850 - page 145

    8. Remote H ost Pr ogram [Fig.8-20 Select one of the Channels] [Fig.8-21 Start Convert Button] How to play the A VI files By using Windows media player: - Click the OPEN button on the Convert AVI window and double click one of the AVI files to play. The AVI files will save in the AVI Files folder (Open Windows Explorer – click My Computer - click ...

  • Clover Electronics CDR0850 - page 146

    Stand-alone DVR In struction Manual ④ Search button for Replaying - Click the Search button on the Player and the Browse for Folder will be displ ayed. - Select the folder that contains the record ed data and click the OK button on the Browser for Folder. One channel or all the ch annels can be replayed dep ends on the selection. ⑤ Capture butt ...

  • Clover Electronics CDR0850 - page 147

    8. Remote H ost Pr ogram 147 [Fig.8-22 Print command window] [Fig.8-23 Print image] ⑦ Division button Select one of the following divisions while replaying. Full Screen 4 Division Screen 9 Division Screen 16 Division Screen [Fig.8-24 Division button] ⑧ Playback (Replay) Speed Control Move the slider with the mouse to control the replaying speed ...

  • Clover Electronics CDR0850 - page 148

    Stand-alone DVR In struction Manual ⑨ Search slider for replaying The slider can be moved left and rig ht by clicking the slider on the bar and d ragging it or just click the bar to search the recorded data. [Fig.8-26 Replay Search Slider] ⑩ Replay Control Refer to section 6-9.2.3. FF STOP NEXT REW PREV PLAY [Fig.8-27 Replay Control buttons] ? ...

  • Clover Electronics CDR0850 - page 149

    9 Installation of additional HDDs CONTENTS 9-1. HDD (H ARD D ISK D RIVE ) INST ALLA TION ...........................................................................150 9-2. I NST ALLA TION OF AN ADDITIONAL HDD ..................................................................................151 149 ...

  • Clover Electronics CDR0850 - page 150

    Stand-alone DVR In struction Manual 9-1. HDD (Hard Disk Drive) INSTALLATION ▶ Three of internal Hard Disk Drives (HDD) and a CD R/W or DVD R/ W can be installed in the system. DVR manufacturer alre ady installed a 320GB of Hard Disk Drive (IDE) and a DVD R/W. To install additional hard disk drives, refer to the followin g pages. Note : Jumper set ...

  • Clover Electronics CDR0850 - page 151

    9. Installa tion of ad ditional HDDs 9-2. Installation of an additional HDD ▶ Set the jumper setting to “Cable Select” position on the additional HDD. Note : Be sure that the jumper setting is correct. If not, the system will not recognize the additional HDD. ▶ Turn off the power. Unscrew and remove the cover. ▶ Install the additional HDD ...

  • Clover Electronics CDR0850 - page 152

    Stand-alone DVR In struction Manual 152 ...

  • Clover Electronics CDR0850 - page 153

    APPENDIX CONTENTS R ECORDING TIME T ABLE ............................................................................................................. 154 F ACTORY DEFAUL T SETTINGS ...................................................................................................... 155 153 ...

  • Clover Electronics CDR0850 - page 154

    Stand-alone DVR In struction Manual Recording time table HDD: 300GB Recording Resolution: Half D 1 (720 x 240) B a s e d o n 8 c a m e r a s H O U R S Each (Total) 15 fps (120fps) 10 fps (80fps) 7 fps (56fps) 5 fps (40fps) 3 fps (24fps) 2 fps (16fps) 1 fps (8fps) BEST 69.00 104.00 149.00 208.00 347.00 521.00 1041.00 HIGH 232.00 348.00 497.00 696.00 ...

  • Clover Electronics CDR0850 - page 155

    Factory default settings (1) LIVE SCREEN 8 SPLIT OSD ON (2) TIME / DATE DISPLA Y : ON TIME FORMA T : 24 HOUR DA TE FORMA T : YYYY/MM/DD (3) LOAD / BACKUP CONFIG NONE LISTS (4) USER ACCOUNT PASSWORD : SET YOUR PASSWORD ( THE PASSWORD IS NULL ) PASSWORD ON/OFF : OFF (5) IR REMOTE ID OFF (6) HDD OVERWRITE ON (7) CAMERA ACTIVE : ALL ON NAME : CAM XX BU ...

  • Clover Electronics CDR0850 - page 156

    Stand-alone DVR In struction Manual (8) AUDIO AUDIO 1 : RELA TED CAMERA CH 1, RECORD OFF , MIC 5 AUDIO 2 : RELA TED CAMERA CH 2, RECORD OFF , MIC 5 AUDIO 3 : RELA TED CAMERA CH 3, RECORD OFF , MIC 5 AUDIO 4 : RELA TED CAMERA CH 4, RECORD OFF , MIC 5 (9) RECORD RECORD ICON DISPLA Y : ON SIZE : ALL HALF D1 (704 X 240) FPS : ALL 15 fp s QUALITY : ALL ...

  • Clover Electronics CDR0850 - page 157

    (10) NETWORK TYPE : DYNAMIC PORT : 1 13 SERVER 1 MODE : DISABLE SERVER 1 IP ADDRESS : 65.60.84.25 SERVER 1 POR T : 300 SERVER 2 MODE : DISABLE SERVER 2 IP ADDRESS : 221.149.149.1 17 SERVER 2 POR T : 300 SERVER SITE NAME : SXXXXXX (MAC ADDRESS) (11) VIDEO - CAMERA INPUT BRIGHTNESS : 128 (Max. 255) CONTRAST : 128 (Max. 255) - V G A O U T P U T BRIGHT ...

  • Clover Electronics CDR0850 - page 158

    Stand-alone DVR In struction Manual 158 ...

  • Clover Electronics CDR0850 - page 159

    FAQ CONTENTS I CANNOT LOGIN ......................................................................................................................... 160 159 ...

  • Clover Electronics CDR0850 - page 160

    Stand-alone DVR In struction Manual I cannot login ▶ Please check if th e link LED of DVR and LAN port of PC a re lit. ▶ Please check if th e IP address on DVR and the PC is identical. Check SYSTEM STATUS by pressing STATUS button of DVR (Available on LIVE mode and RECORD mode.) MY IP : xxx.xxx.xxx.xxx Check Target IP Address by cli cking CONF ...

  • Clover Electronics CDR0850 - page 161

    Limited 2Year Warranty This warranty gives the original purchaser sp ecific legal rights and you may also have other rights, which may vary from state to state. If our prod ucts do not function because of any d efect in material or workmanship, we will repair it for free for 2 year on parts and labor from the date of original purchase. This warrant ...

  • Clover Electronics CDR0850 - page 162

    Stand-alone DVR In struction Manual How to obtain Factory Service z Original purchaser must fill out the warranty card and mail it to the factory with the model number, serial number and the date of purchase. z We will repair or replace, and return the syst em to the owne r under this limited warranty. z Please pack the system carefully and securel ...

Manufacturer Clover Electronics Category DVR

Documents that we receive from a manufacturer of a Clover Electronics CDR0850 can be divided into several groups. They are, among others:
- Clover Electronics technical drawings
- CDR0850 manuals
- Clover Electronics product data sheets
- information booklets
- or energy labels Clover Electronics CDR0850
All of them are important, but the most important information from the point of view of use of the device are in the user manual Clover Electronics CDR0850.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Clover Electronics CDR0850, service manual, brief instructions and user manuals Clover Electronics CDR0850. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Clover Electronics CDR0850.

Similar manuals

A complete manual for the device Clover Electronics CDR0850, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Clover Electronics CDR0850 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Clover Electronics CDR0850.

A complete Clover Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Clover Electronics CDR0850 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Clover Electronics CDR0850, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Clover Electronics CDR0850, that we can find in the current document
3. Tips how to use the basic functions of the device Clover Electronics CDR0850 - which should help us in our first steps of using Clover Electronics CDR0850
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Clover Electronics CDR0850
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Clover Electronics CDR0850 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Clover Electronics CDR0850?

Use the form below

If you did not solve your problem by using a manual Clover Electronics CDR0850, ask a question using the form below. If a user had a similar problem with Clover Electronics CDR0850 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)