Manual Nortec MES-U

14 pages 0.71 mb
Download

Go to site of 14

Summary
  • Nortec MES-U - page 1

    MES-U Electrode Steam Humidifiers Installation, Operation, Maintenance, Spare Parts, and Exploded Views Guide IMPORTANT: Read and save this guide for future reference. This guide to be left with equipment owner. Form 03-111 Rev. 1 ...

  • Nortec MES-U - page 2

    Table of Contents INSTALLATION 1 – RECEIVING EQUIPMENT ..............................1 – PRINCIPAL OF OPERATION ............................1 – WATER SUPPLY AND PLUMBING ..........................2 – WATER CONNECTION .............................2 – START-UP AND OPERATION ............................2 – CAPACITY ADJUSTMENT ............. ...

  • Nortec MES-U - page 3

    INSTALLATION RECEIVING EQUIPMENT 1. Check packing slip to ensure ALL material has been received. 2. Inspect box for damage and note on shipping waybill accordingly. 3. After unpacking, inspect unit for damage and if damage is found, advise shipper as soon as possible. 4. Inspect unit (humidifier) to ensure it is the correct model, phase, and voltag ...

  • Nortec MES-U - page 4

    WATER SUPPLY AND PLUMBING 1. The orifice in the fill valve is sized for an extended water pressure range of 30 to 85 psi. 2. For water pressure between 15 and 30 psi, notify the factory and the next larger size fill valve will be supplied. 3. For cases below 15 psi, notify the factory and a fill valve with an oversized orifice will be supplied. 4. ...

  • Nortec MES-U - page 5

    out and the fill solenoid will again open until the cylinder is again full. This cycling of the red light and fill valve will continue until the unit’s full output capacity is reached after which the water level will automatically lower itself in the cylinder. (The increased concentration allows for lower electrode coverage while maintaining the ...

  • Nortec MES-U - page 6

    2. The old cylinder must be drained completely before removing. This is done by pushing the auto on/off/drain switch to the “ drain ” position. 3. When completely drained, push the auto on/off/drain switch to the “ off ” position. 4. Open the main disconnect during the entire cylinder change operation. 5. The power wires to the cylinder are ...

  • Nortec MES-U - page 7

    is normally caused by short cycling, a restricted drain, or back pressure. The foam, generated in these instances, is conductive and may lead to false full cylinder indication if the level of the foam approaches the top of the cylinder. BACK PRESSURE: The restriction of steam flow caused by long steam runs, improperly sloped steam lines, elbows cha ...

  • Nortec MES-U - page 8

    Red “Change Cylinder” light on - Water NOT at top of cylinder: Water foaming to top of cylinder causing false full cylinder indication. This also may be accompanied by arcing (flashing) inside cylinder. Refer to “ Terms Used ” regarding foaming. Water remains at high level and won’t concentrate: This is normal on cold start-up and can be ...

  • Nortec MES-U - page 9

    -7- MES -U/MES-P HUMIDIFIER PHYSICAL DA T A MESU DIM 10/19/98 WEIGHTS (DR Y) DIMENSIONS NOTES: 1. FOR H EIGHT OF 5 LB P VC USE HEIGHT OF 10 LB MODEL. 2. PVC = PRIMARY VOL T AGE CONNECTION. 3. MODEL SHOWN: 163-91X5 (CONFIGURA TION #5) WITH CP (CLOSED PLUMBING) COVER REMOVED. LEFT VIEW FRONT VIEW TO P VI E W condair AUTO/ON OFF DRAIN condair MES-U / ...

  • Nortec MES-U - page 10

    -8- MES-U INTERNAL AND FIELD WIRING WIRING DIAGRAM number 150-6240 REV . B (For PVC or L VC unit with remote or attached electrical) STEAM CYLINDER NOTE: SOLID LINES WIRING BY OTHERS HIGH VOL TA GE ELECTRODE LEADS (BY OTHERS OR INCLUDED WITH PVC UNIT) -2 LEADS FOR SINGLE PHASE -3 LEADS FOR THREE PHASE PRIMARY TERMINAL BL OCK (provided with PVC unit ...

  • Nortec MES-U - page 11

    ...

  • Nortec MES-U - page 12

    ...

  • Nortec MES-U - page 13

    LIMITED WARRANTY NORTEC INDUSTRIES INCORPORATED and/or NORTEC AIR CONDITIONING INDUSTRIES LIMITED (hereinafter collectively referred to as THE COMPANY), warrant for a period of two years from date of shipment, that THE COMPANY’s manufactured and assembled products, not otherwise expressly warranted (with the exception of the cylinder) are free fr ...

  • Nortec MES-U - page 14

    Model # :_________________________ Serial # :_________________________ Cylinder # :_______________________ Cylinder Last Replaced: _________________________ MTH/DAY/YR _________________________ MTH/DAY/YR _________________________ MTH/DAY/YR NORTEC INDUSTRIES INC. P.O. Box 698 826 Proctor Avenue Ogdensburg, NY 13669 NORTEC AIR CONDITIONING INDUSTRI ...

Manufacturer Nortec Category Humidifier

Documents that we receive from a manufacturer of a Nortec MES-U can be divided into several groups. They are, among others:
- Nortec technical drawings
- MES-U manuals
- Nortec product data sheets
- information booklets
- or energy labels Nortec MES-U
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nortec MES-U.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nortec MES-U, service manual, brief instructions and user manuals Nortec MES-U. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nortec MES-U.

Similar manuals

A complete manual for the device Nortec MES-U, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nortec MES-U by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nortec MES-U.

A complete Nortec manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nortec MES-U - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nortec MES-U, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nortec MES-U, that we can find in the current document
3. Tips how to use the basic functions of the device Nortec MES-U - which should help us in our first steps of using Nortec MES-U
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nortec MES-U
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nortec MES-U in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nortec MES-U?

Use the form below

If you did not solve your problem by using a manual Nortec MES-U, ask a question using the form below. If a user had a similar problem with Nortec MES-U it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)