English dropdown-ico

Manual Weed Eater TILLER WET6500A

28 pages 1.05 mb
Download

Go to site of 28

Summary
  • Weed Eater TILLER WET6500A - page 1

    OWNER'S MANUAL MODEL NO.WET6500A 6.5 HP 17 Inch Tiller Assembly • Operation Maintenance • Service and Adjustments • Storage • Troubleshooting • Repair Parts For Parts and Service, contact our authorized distributor: call 1-800-849-1297 For Technical Assistance: call 1-800-829-5886 WEED EATER 186100 Rev. 1 02.21.03 TR PRINTED IN U.S.A ...

  • Weed Eater TILLER WET6500A - page 2

    SAFETY RULES SAFE OPERATION PRACTICES FOR WALK-BEHIND POWERED ROTARYTILLERS TRAINING Read the Owner's Manual carefully, Be thoroughly familiar with the controls and the proper use of the equipment, Know how to stop the unit and disengage the controls quickly. • Never allow children to operate the equipment. Never allow adults to operate the ...

  • Weed Eater TILLER WET6500A - page 3

    PRODUCT SPECIFICATIONS GASOLINE CAPACITY: 3 Quarts (2.8L) Unleaded Regular OIL (API-SF-SJ): SAE 30 (Above 32°F/0°C) (Capacity: 20 ozJ0.6L) SAE 5w-30 (Below 32°F/0°C) SPARK PLUG : - Champion GAP: .030"/0,76mm) RJ19LM CONGRATULATIONS on your purchase of a new tiller. It has been designed, engineered and manufactured to give you the best poss ...

  • Weed Eater TILLER WET6500A - page 4

    ...

  • Weed Eater TILLER WET6500A - page 5

    ...

  • Weed Eater TILLER WET6500A - page 6

    ASSEMBLY CONNECT SHIFT ROD (See Fig. 7) ATTACH CLUTCH CABLE (See Fig. 6) • Hook end of clutch cable through hole in control bar bracket if necessary. END OF CONTROL BAR CLUTCH CABLE BRACKET CONTROLBAR BRACKET BAR CLUTCH CABLE FIG. 6 • Insert end of shift rod into hole of shift lever indicator. Insert hairpin clip through hole of shift rod to se ...

  • Weed Eater TILLER WET6500A - page 7

    KNOWYOUR TILLER OPERATION L READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER. Compare the illustrationswith your tiller to familiarize yourself with the location of various controls and adjustments, Save this manual for" futui'e reference. These symbols may appear on your Tiller or in literature supplied with th ...

  • Weed Eater TILLER WET6500A - page 8

    OPERATION The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask over spectacles or standard safety glasses. HOW TO USE YOUR TILLER Know how to operate all co ...

  • Weed Eater TILLER WET6500A - page 9

    OPERATION TURNING • • Release the drive control bar. • Move throttle control to "SLOW" position. Place shift leverindicatorin"F' (forward) position. Tines will not turn. • Lift handle to raise tines out of ground. • Swing the handle in the opposite direction you wish to turn, being careful to keep feet and legs away fr ...

  • Weed Eater TILLER WET6500A - page 10

    ..... OPERATION TO START ENGINE (See Fig. 13) TILLING HINTS I _[]L CAUTION: Keep drive control bar in "DISENGAGED" position when start- ing engine. When starting engine for the first time or if engine has run out of fuel, it will take extra pulls of the recoil starter to move fuel from the tank to the engine• • Make sure spark plug wi ...

  • Weed Eater TILLER WET6500A - page 11

    OPERATION TINE SHEAR PINS The tine assemblies on your tiller are secured to the tine shaft with shear pins (See 'q-INE REPLACEMEN'I "_ in the Service and Adjustments section of this manual). If the tiller is unusually overloaded or jammed, the shear pins are designed to break before internal damage occurs to the transmission. • If ...

  • Weed Eater TILLER WET6500A - page 12

    MAINTENANCE I MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE Y SERVICE DATES Check Engine Oil Level li/' !_ Change Engine Oil 1_1,2 Oil Pivot Points If Inspect Spark Arrester/Muffler V' Inspect Air Screen I_ Clean or Replace Air Cleaner Cartridge I/2 Clean Engine Cylinder Fins Ii/ Replace Spark Plug RH Gear Case Grease ...

  • Weed Eater TILLER WET6500A - page 13

    MAINTENANCE Disconnect spark plug wire before performing any maintenance (except carburetor adjustment) to prevent accidental starting of engine. Prevent fires! Keep the engine free of grass, leaves, spilled oil, or fuel. Remove fuel from tank before tipping unit for maintenance. Clean muffler area of all grass, dirt, and debris. Do not touch hot m ...

  • Weed Eater TILLER WET6500A - page 14

    r i MAINTENANCE .... MUFFLER COOLING SYSTEM (See Fig. 21) Your engine is air cooled. For proper engine performance and long life keep your engine clean. • Clean air screen frequently using a stiff-bristled brush. • Remove blower housing and clean as necessary. • Keep cylinder fins free of dirt and chaff. CYLINDER FINS MUFFLER HOUSING SCREEN F ...

  • Weed Eater TILLER WET6500A - page 15

    SERVICE AND ADJUSTMENTS IA TILLER CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into ' I contact with plug. I TO ADJUST HANDLE HEIGHT (See Fig. 22) Select handle height best suited for your tilling conditions. Handle height will be different when tiller digs into soil. • First loosen handle lock leve ...

  • Weed Eater TILLER WET6500A - page 16

    SERVICE AND ADJUSTMENTS TINE REPLACEMENT (See Figs. 24, 25 and 26) I_1) CAUTION: Tines are sharp. Wear gloves or other protection when han- dling tines, A badly worn tine causes your tiller to work harder and dig more shallow. Most important, worn tines cannot chop and To maintain the superb tilling performance of this machine the tines should be c ...

  • Weed Eater TILLER WET6500A - page 17

    SERVICE AND ADJUSTMENTS TO REMOVE BELT GUARD (See Fig. 27) NOTE: For ease of removal, remove hairpin clip and clevis pin from left wheel. Pull wheel out from tiller about 1 inch (2.5 cm). • Remove two (2) screws from side of belt guard. • Remove hex nut and washer from bottom of belt guard (located behind wheel). • Pull belt guard out and awa ...

  • Weed Eater TILLER WET6500A - page 18

    SERVICE AND ADJUSTMENTS ENGINE TO ADJUST THROTTLE CONTROL CABLE (See Fig. 29) The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is necessary, proceed as follows: • With engine not running, move remote throttle control lever to "FAST" position. • If throttle lever on engine touche ...

  • Weed Eater TILLER WET6500A - page 19

    STORAGE Immediately prepare your tiller for storage at the end of the season or if the unit will not be used for 30 days or more. TILLER Clean entire tiller (See "CLEANING" inthe Maintenance section of this manual). • Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of t ...

  • Weed Eater TILLER WET6500A - page 20

    TROUBLESHOOTING POINTS . CAUSE CORRECTION PROBLEM Will not start Hard to start Loss of power Engine overheats Excessive bounce/ difficult handling Soil balls up or clumps Engine runs but tiller won't move Engine runs but labors when tilling Tines will not rotate Hard to shift into gear Tiller shuts off when drive control bar engaged 1. Out of ...

  • Weed Eater TILLER WET6500A - page 21

    REPAIR PARTS TILLER -- MODEL NUMBER WET6500A HANDLE ASSEMBLY 42 41 1 29 35 2 35 15 2 37 26 21 / KEY NO. 1 2 4 8 10 11 15 16 17 18 19 20 21 PART NO. 175769 150744 159227 71191008 8389J 4497H 108281X 72110608 109229X 73680600 19131611 109228X 150217 DESCRIPTION Control, Throttle Grip, Handle Bar, Control Screw, Pan Hd. #10-24 Grip, Handle Clip, Hai ...

  • Weed Eater TILLER WET6500A - page 22

    REPAIR PARTS TILLER - - MODEL NUMBER WET6500A MAINFRAME, LEFT SIDE 3 65 37 36 35 I / 34 31 3O 2 16 19 28 3 4O 4O - 23 15 24 KEY PART NO. NO. 1 73510500 2 10040600 3 73220600 4 170127 5 164329 6 110111X 7 72110404 8 8700J 9 86777 10 9484R 11 10040400 12 73220400 13 23230506 14 156117 15 19111116 16 145102 19 12000028 21 110652X 22 74770508 23 ...

  • Weed Eater TILLER WET6500A - page 23

    REPAIR PARTS TILLER - - MODEL NUMBER WET6500A MAINFRAME, RIGHT SIDE 11 5 I k lO KEY NO. 5 7 8 9 10 11 12 PART NO. 102332X 102173X 10040600 73220600 74760524 4497H 126875X DESCRIPTION Bracket, Reinforcement CounterWeight, R.H. Washer, Lock 3/8 Nut, Hex 3/8-16 Bolt, Hex 5/16-18 x 1-1/2 Clip, Hairpin Rivet, Drilled KEY PART NO. NO. DESCRIPTION 13 1021 ...

  • Weed Eater TILLER WET6500A - page 24

    ...

  • Weed Eater TILLER WET6500A - page 25

    ...

  • Weed Eater TILLER WET6500A - page 26

    REPAIR PARTS TILLER - - MODEL NUMBER WET6500A TINE ASSEMBLY 2 I 1 1 11 2 8 9 9 4 9 KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION 1 4459J Tine, Outer, L.H. 8 74610616 Bolt, Hex 3/8-24 x 1 2 132673 Clevis Pin 9 4460J Tine, Outer, R.H. 3 6554J Tine, Inner, LH. 10 132728 Assembly, Hub and Plate, R.H. 4 3146R Clip, Hairpin 11 6555J Tine, I ...

  • Weed Eater TILLER WET6500A - page 27

    REPAIR PARTS TILLER -- MODEL NUMBER WET6500A DECALS 4 10 12 9 KEY PART NO. NO. 1 162846 3 186761 4 143678 5 141907 6 102180× 9 141906 10 156199 12 162215 - - 186100 - - 186101 DESCRIPTION Decal, Logo Decal, Logo Decal, Instruction, Tilling Decal, Hand Placement Decal, Shift Indicator Decal, Warning, Rotating Tines Deal, Reverse Decal, Tine Shield ...

  • Weed Eater TILLER WET6500A - page 28

    LIMITED WARRANTY "[he Manufacturer warrar;ts to the (_riginal consumer purchaser thatthis product as rnanufa(_ture_is free from de- fects in materials and workmanship. For a period of two (2) years from date of purchase by the original consumer purchaser, we will repair or replace, at our option, without charge for parts or labor incurred in r ...

Manufacturer Weed Eater Category Tiller

Documents that we receive from a manufacturer of a Weed Eater TILLER WET6500A can be divided into several groups. They are, among others:
- Weed Eater technical drawings
- TILLER WET6500A manuals
- Weed Eater product data sheets
- information booklets
- or energy labels Weed Eater TILLER WET6500A
All of them are important, but the most important information from the point of view of use of the device are in the user manual Weed Eater TILLER WET6500A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Weed Eater TILLER WET6500A, service manual, brief instructions and user manuals Weed Eater TILLER WET6500A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Weed Eater TILLER WET6500A.

Similar manuals

A complete manual for the device Weed Eater TILLER WET6500A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Weed Eater TILLER WET6500A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Weed Eater TILLER WET6500A.

A complete Weed Eater manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Weed Eater TILLER WET6500A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Weed Eater TILLER WET6500A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Weed Eater TILLER WET6500A, that we can find in the current document
3. Tips how to use the basic functions of the device Weed Eater TILLER WET6500A - which should help us in our first steps of using Weed Eater TILLER WET6500A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Weed Eater TILLER WET6500A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Weed Eater TILLER WET6500A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Weed Eater TILLER WET6500A?

Use the form below

If you did not solve your problem by using a manual Weed Eater TILLER WET6500A, ask a question using the form below. If a user had a similar problem with Weed Eater TILLER WET6500A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)