English dropdown-ico

Manual Fiat 500 (2014)

426 pages Not applicable
Download

Go to site of 426

Summary
  • Fiat 500 (2014) - page 1

    Chrysler Group LLC OWNER’S MANUAL 2014 2014 FIA T 500 14FF500-126-AA First Edition Printed in U.S.A. FIA T 500 ...

  • Fiat 500 (2014) - page 2

    VEHICLES SOLD IN CANAD A With respect to any V ehicles Sold in Cana da, the name Chrysler Group LL C shall be deemed t o be deleted and the name Chr ysler Canada Inc . used in substitution t heref or e . DRIVING AND AL COHOL Drunk en driving is one of the most fr equent causes of a ccidents. Y our driving ability can be seriously impair ed with blo ...

  • Fiat 500 (2014) - page 3

    T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................. 8 3 4 UNDERST ANDING YOUR INSTRUMENT P ANEL .................................. 1 ...

  • Fiat 500 (2014) - page 4

    ...

  • Fiat 500 (2014) - page 5

    INTRODUCTION CONTENTS 䡵 INTRODUCTION ........................ 4 䡵 HOW TO USE THIS MANUAL .............. 5 䡵 W ARNINGS AND CAUTIONS .............. 7 䡵 VEHICLE IDENTIFICA TION NUMBER ........ 7 䡵 VEHICLE MODIFICA TIONS/AL TERA TIONS .... 8 1 ...

  • Fiat 500 (2014) - page 6

    INTRODUCTION Congratulations on selecting your new vehicle. Be as- sured that it repr esents precision workmanship, distinc- tive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with the operation an ...

  • Fiat 500 (2014) - page 7

    HOW TO USE THIS MANUAL Consult the T able of Contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle’s equipment. The detailed index at the back of this Owner’s Manual contains a ...

  • Fiat 500 (2014) - page 8

    6 INTRODUCTION ...

  • Fiat 500 (2014) - page 9

    W ARNINGS AND CAUTIONS This Owners Manual contains W ARNINGS against op- erating procedur es that could r esult in a collision or bodily injury . It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information. Observe all W arnings and Cau- ...

  • Fiat 500 (2014) - page 10

    NOTE: It is illegal to remove or alter the VIN. VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Stamped VIN Location 8 INTRODUCTION ...

  • Fiat 500 (2014) - page 11

    THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A WORD ABOUT YOUR KEYS ............. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Locking Doors W ith A Key ................ 1 4 ▫ Key-In-Ignition Reminder ................ 1 4 䡵 SENTR Y KEY® ......................... 1 4 ▫ Replacement Keys ..................... 1 5 ▫ G ...

  • Fiat 500 (2014) - page 12

    䡵 POWER WINDOWS ..................... 2 3 ▫ Power W indow Switches ................. 2 3 䡵 LIFTGA TE ............................ 2 5 䡵 OCCUP ANT RESTRAINTS ................ 2 6 ▫ Lap/Shoulder Belts .................... 2 9 ▫ Lap/Shoulder Belt Untwisting Procedure ..... 3 4 ▫ Seat Belts In Passenger Seating Positions ...... 3 4 ▫ Au ...

  • Fiat 500 (2014) - page 13

    ▫ Exhaust Gas .......................... 7 8 ▫ Safety Checks Y ou Should Make Inside The V ehicle .......................... 7 9 ▫ Periodic Safety Checks Y ou Should Make Outside The V ehicle .......................... 8 1 2 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 1 1 ...

  • Fiat 500 (2014) - page 14

    A WORD ABOUT YOUR KEYS The key fob contains the Remote Keyless Entry (RKE) transmitter with an integrated key . T o use the mechanical key simply press the mechanical key release button. The vehicle is supplied with a code card containing key code numbers to order duplicate keys, and the autho- rized studio that sold you your new vehicle has the ke ...

  • Fiat 500 (2014) - page 15

    W ARNING! • Before exiting a vehicle, always apply the parking brake, shift the transmission into P ARK and re- move the Key Fob from the ignition. When leaving the vehicle, always lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous ...

  • Fiat 500 (2014) - page 16

    W ARNING! (Continued) • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death. CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Locking Doors With A Key Y ou can inser ...

  • Fiat 500 (2014) - page 17

    NOTE: A key which has not been programmed is also considered an invalid key , even if it is cut to fit the ignition switch lock cylinder for that vehicle. If the V ehicle Security Light is on after the key is turned to the ON/RUN position, it indicates that there is a problem with the electronics. CAUTION! • Always remove the Sentry Key® from th ...

  • Fiat 500 (2014) - page 18

    General Information The Sentry Key® system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interfer ence that may cause unde- sired operation. NOTE: ...

  • Fiat 500 (2014) - page 19

    NOTE: The line of transmission must not be blocked with metal objects. T o Unlock The Doors And Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver ’s door or twice, within five seconds, to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminat ...

  • Fiat 500 (2014) - page 20

    2. Rotate the screw located on the side of the Key Fob using a small screwdriver . 3. T ake out the battery case. Remove and replace the battery observing its polarity . Mechanical Key Release Button Key Fob Screw Location 18 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE ...

  • Fiat 500 (2014) - page 21

    4. Refit the battery case inside the Key Fob and turn the screw to lock it into place. General Information This device complies with Part 15 of FCC rules and with RS-210 of Industry Canada. Operation is subject to the following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be rec ...

  • Fiat 500 (2014) - page 22

    If your RKE transmitter fails to operate from a normal distance, check for these two conditions: 1. W eak battery in RKE transmitter . The expected life of the battery is from one to two years. 2. Closeness to a radio transmitter such as a radio station tower , airport transmitter , and some mobile or CB radios. DOOR LOCKS The door locks can be man ...

  • Fiat 500 (2014) - page 23

    W ARNING! • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death. • For personal security and safety in the event of a collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • Before exiting a vehicle, always apply the parking ...

  • Fiat 500 (2014) - page 24

    Power Door Locks A power door lock switch is incorporated into the driver door handle. Push or pull the handle to lock or unlock the doors and liftgate. If the driver ’s door handle is pushed a red lock indicator will show on the driver ’s door handle (indicating locked) when the door is closed, the door will lock. NOTE: T o prevent the key fro ...

  • Fiat 500 (2014) - page 25

    Autoclose When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). T o change the setting proceed as follows: 1. Briefly pr ess the MENU button “On” or “Off” will flash on the display (according to the previous setting). 2. Press the UP or DOWN button for setting. 3. Briefly press the MENU bu ...

  • Fiat 500 (2014) - page 26

    Auto-Down The driver’s door window switch have an Auto-Down feature. Pr ess the window switch for approximately one second, release, and the window will go down automati- cally . T o cancel the Auto-Down movement, operate the switch in either the up or down direction and release the switch. W ind Buffeting W ind buffeting can be described as the ...

  • Fiat 500 (2014) - page 27

    LIFTGA TE T o unlock the liftgate, use the Remote Keyless Entry (RKE) transmitter or activate the power door lock switches located on the driver door handle. T o open the liftgate, squeeze the liftgate release handle and pull the liftgate open with one fluid motion. W ARNING! • Driving with the liftgate open can allow poisonous exhaust gases into ...

  • Fiat 500 (2014) - page 28

    OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems: • Three-point lap and shoulder belts for all seating positions • Advanced Front Air Bags for driver and front passenger • Supplemental Driver Side Knee Air Bag • Supplemental Side Air Bag Inflatable Curtains (SABIC) for the driver and ...

  • Fiat 500 (2014) - page 29

    Here are some simple steps you can take to minimize the risk of harm from a deploying air bag: 1. Children 12 years old and under should always ride buckled up in a rear seat. W ARNING! • Never place a rear facing infant seat in front of an air bag. A deploying Passenger Advanced Front Air Bag can cause death or serious injury to a child 12 years ...

  • Fiat 500 (2014) - page 30

    5. If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers ar e pr ovided in ⬙ If Y ou Need Consumer Assistance. ⬙ W ARNING! • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you p ...

  • Fiat 500 (2014) - page 31

    Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts r educe the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at ...

  • Fiat 500 (2014) - page 32

    W ARNING! (Continued) • T wo people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly . Never use a lap/shoulder belt or lap belt for more than one person, no matter what their size. Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the ...

  • Fiat 500 (2014) - page 33

    W ARNING! • A belt buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you prop- erly . In a sudden stop you could move too far forward, increasing the ...

  • Fiat 500 (2014) - page 34

    W ARNING! (Continued) • A shoulder belt placed behind you will not protect you from injury during a collision. Y ou are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together . 4. Position the lap belt across your thighs, below your abdomen. T o remove slack in th ...

  • Fiat 500 (2014) - page 35

    W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt may not protect you properly . In a collision, it could even cut into you. Be sure th ...

  • Fiat 500 (2014) - page 36

    Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. 3. ...

  • Fiat 500 (2014) - page 37

    If the passenger seating position is equipped with an ALR and is being used for normal usage: Only pull the belt webbing out far enough to comfortably wrap around the occupant’s mid-section so as to not activate the ALR. If the ALR is activated, you will hear a ratcheting sound as the belt retracts. Allow the webbing to retract completely in this ...

  • Fiat 500 (2014) - page 38

    W ARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. • Failure to replace the belt and retractor assembly could increase the risk of injury in collisi ...

  • Fiat 500 (2014) - page 39

    Enhanced Seat Belt Use Reminder System (BeltAlert®) BeltAlert® is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert®) to fasten their seat belts. The feature is active whenever the ignition is on. If the driver or front seat passenger is unbelted, the Seat Belt Reminder Light will turn on and ...

  • Fiat 500 (2014) - page 40

    Seat Belt Extender If a seat belt is too short even when fully extended and when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized studio can provide you with a seat belt extender . This extender should be used only if the existing belt is not long enough. When it is not required, r emove the ex- ...

  • Fiat 500 (2014) - page 41

    In addition, the vehicle is equipped with a Supplemental Driver Side Knee Air Bag mounted in the instrument panel below the steering column. NOTE: The Driver and Passenger Advanced Front Air Bags are certified to new Federal regulations for Ad- vanced Air Bags. The Advanced Front Air Bags are designed to allow the air bags to have dif ferent inflat ...

  • Fiat 500 (2014) - page 42

    This vehicle is equipped with Supplemental Side Air Bag Inflatable Curtains (SABIC) to protect the driver , front, and rear passengers sitting next to a window . The SABIC are located above the side windows. The trim covering the SABIC is labeled SRS AIRBAG. This vehicle is equipped with Supplemental Seat- Mounted Side Air Bags (SAB). The SAB are m ...

  • Fiat 500 (2014) - page 43

    • Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, and Seat T rack Position Sensors Advanced Front Air Bag Features The Advanced Front Air Bag system provides output appropriate to the severity and type of collision as determined by the Occupant Restraint Controller (ORC), which may receive information fr ...

  • Fiat 500 (2014) - page 44

    Supplemental Seat-Mounted Side Air Bags (SAB) Supplemental Seat-Mounted Side Air Bags (SAB) pr ovide enhanced pr otection to help protect an occupant during a side impact. The SAB are marked with an air bag label sewn into the outboard side of the front seats. When the air bag deploys, it opens the seam between the front and side of the seat’s tr ...

  • Fiat 500 (2014) - page 45

    NOTE: Air Bag covers may not be obvious in the interior trim, but they will open during air bag deployment. The system includes side impact sensors that are cali- brated to deploy the Seat-Mounted Side Air Bags (SAB) and SABIC during impacts that requir e air bag occupant protection. SAB and SABIC air bags ar e a supplement to the seat belt restrai ...

  • Fiat 500 (2014) - page 46

    W ARNING! • Y our vehicle is equipped with left and right Supplemental Side Air Bag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC. The area where the SABIC is located should remain free from any obstructions. • Do not use accessory seat covers or place objects between you and t ...

  • Fiat 500 (2014) - page 47

    Along with seat belts and pretensioners, Advanced Front Air Bags and the Supplemental Driver Side Knee Air Bag work with the knee impact bolsters to provide improved protection for the driver and front passenger . Air Bag Deployment Sensors And Controls Occupant Restraint Controller (ORC) The ORC is part of a Federally regulated safety system requi ...

  • Fiat 500 (2014) - page 48

    The side air bags will not deploy in all side collisions. Side air bag deployment will depend on the severity and type of collision. Because air bag sensors measur e vehicle deceleration over time, vehicle speed and damage by themselves are not good indicators of whether or not an air bag should have deployed. Seat belts are necessary for your prot ...

  • Fiat 500 (2014) - page 49

    W ARNING! Ignoring the Air Bag W arning Light in your instru- ment panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized studio service the air bag syste ...

  • Fiat 500 (2014) - page 50

    Supplemental Driver Side Knee Air Bag Inflator Unit The Supplemental Driver Side Knee Air Bag unit is located in the instrument panel trim beneath the steering column. When the ORC detects a collision requiring the Advanced Front Air Bags, it signals the inflator units. A large quantity of non-toxic gas is generated to inflate the Supplemental Driv ...

  • Fiat 500 (2014) - page 51

    A quantity of non-toxic gas is generated to inflate the side curtain air bag. The inflating side curtain air bag pushes the outside edge of the headliner out of the way and covers the window . The air bag inflates in about 30 milliseconds (about one-quarter of the time that it takes to blink your eyes) with enough for ce to injure you if you are no ...

  • Fiat 500 (2014) - page 52

    Carefully check the vehicle for fuel leaks in the engine compartment and on the ground near the engine com- partment and fuel tank before resetting the system and starting the engine. System Reset Procedure After an impact causing air bag deployment, the left and right turn signal lights, located in the instrument panel cluster , will both be blink ...

  • Fiat 500 (2014) - page 53

    Customer Action Customer Will See 1. T urn ignition OFF . (T urn Signal Switch Must be placed in Neutral State). 2. T urn ignition ON. Left T urn Light is OFF . Right T urn Light BLINKS. 3. T urn Right T urn Signal Switch ON. Right T urn Light is ON SOLID. Left T urn Light BLINKS. 4. T urn Left T urn Signal Switch ON. Left T urn Light is ON SOLID. ...

  • Fiat 500 (2014) - page 54

    If A Deployment Occurs The Advanced Fr ont Air Bags ar e designed to deflate immediately after deployment. NOTE: Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system. If you do have a collision which deploys the air bags, any or all of the following may occur: • The nylon air ...

  • Fiat 500 (2014) - page 55

    W ARNING! Deployed air bags and seat belt pretensioners cannot protect you in another collision. Have the air bags, seat belt pretensioners, and the front seat belt retractor assemblies replaced by an authorized studio immedi- ately . Also, have the Occupant Restraint Controller (ORC) system serviced as well. Maintaining Y our Air Bag System W ARNI ...

  • Fiat 500 (2014) - page 56

    Air Bag W arning Light Y ou will want to have the air bags ready to inflate for your protection in a collision. The Air Bag W arning Light monitors the internal circuits and interconnecting wiring associated with air bag system electrical components. While the air bag system is designed to be maintenance free, if any of the following occurs, have a ...

  • Fiat 500 (2014) - page 57

    vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to recor d such data as: • How various systems in your vehicle were operating; • Whether or not the driver and passenger safety belts were buckled/fastened; • How far (if at all) the driver was depressing the accel ...

  • Fiat 500 (2014) - page 58

    Children 12 years or younger should ride properly buckled up in a rear seat, if available. According to crash statistics, children are safer when properly restrained in the rear seats rather than in the front. W ARNING! In a collision, an unrestrained child can become a projectile inside the vehicle. The force required to hold even an infant on you ...

  • Fiat 500 (2014) - page 59

    Summary Of Recommendations For Restraining Children In V ehicles Child Size, Height, W eight Or Age Recommended T ype Of Child Restraint Infants and T oddlers Children who are two years old or younger and who have not reached the height or weight limits of their child restraint Either an Infant Carrier or a Convertible Child Restraint, facing rearw ...

  • Fiat 500 (2014) - page 60

    Infants And Child Restraints Safety experts recommend that children ride rearwar d- facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear facing child safety seat. T wo types of child restraints can be used r earward-facing: infant carriers and convertible child seats. The infant carr ...

  • Fiat 500 (2014) - page 61

    remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. All children whose weight or height is above the forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat belts fit properly . If the child cannot sit with k ...

  • Fiat 500 (2014) - page 62

    Children T oo Large For Booster Seats Children who are large enough to wear the shoulder belt comfortably , and whose legs ar e long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat. Use this simple 5-step test to decide whether the child can use the vehicle’s seat belt alo ...

  • Fiat 500 (2014) - page 63

    Recommendations For Attaching Child Restraints Restraint T ype Combined W eight of the Child + Child Restraint Use any attachment method shown with an “X” Below LA TCH – Lower Anchors Only Seat Belt Only LA TCH – Lower Anchors + T op T ether Anchor Seat Belt + T op T ether Anchor Rear-Facing Child Restraint Up to 65 lbs (29.5 kg) XX Rear-Fa ...

  • Fiat 500 (2014) - page 64

    Lower Anchors And T ethers For Children (LA TCH) Restraint System Y our vehicle is equipped with the child restraint anchor- age system called LA TCH, which stands for Lower Anchors and T ethers for CHildren. The LA TCH system has thr ee vehicle anchor points for installing LA TCH- equipped child seats. There are two lower anchorages located at the ...

  • Fiat 500 (2014) - page 65

    LA TCH Positions For Installing Child Restraints In This V ehicle • Lower Anchorage Symbol 2 anchorages per seating position • T op T ether Anchorage Symbol 2 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 63 ...

  • Fiat 500 (2014) - page 66

    What is the weight limit (child’s weight + weight of the child restraint) for using the LA TCH anchorage system to attach the child restraint? 65 lbs (29.5 kg) Use the LA TCH anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.5 kg). Use the seat belt and tether anchor instead of the LA TCH system once th ...

  • Fiat 500 (2014) - page 67

    Can two child restraints be attached using a common lower LA TCH anchorage? No Never “share” a LA TCH anchorage with two or more child restraints. If the center position does not have dedicated LA TCH lower anchorages, use the seat belt to install a child seat in the center position next to a child seat using the LA TCH anchorages in an outboar ...

  • Fiat 500 (2014) - page 68

    Locating The LA TCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage sym- bols on the seatback. They ar e just visible when you lean into the rear seat to install the child restraint. Y ou will easily feel them if you run your finger along the gap between ...

  • Fiat 500 (2014) - page 69

    Locating The LA TCH Anchorages In addition, there are tether strap anchorages behind each rear seating position located on the back of the seat. LA TCH-compatible child r estraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower anchorage and a way to tighten the c ...

  • Fiat 500 (2014) - page 70

    2. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can mor e easily attach the hooks or connectors to the vehicle anchorages. 3. Place the child seat between the lower anchorages for that seating position. For some second r ow seats, you may need to recline the seat and/or raise the head restraint to g ...

  • Fiat 500 (2014) - page 71

    How T o Stow An Unused ALR Seatbelt When using the LA TCH attaching system to install a child r estraint, stow all ALR seat belts that are not being used by other occupants or being used to secure child restraints. An unused belt could injure a child if they play with it and accidentally lock the seatbelt retractor . Before installing a child restr ...

  • Fiat 500 (2014) - page 72

    Installing Child Restraints Using The V ehicle Seat Belt The seat belts in the passenger seating positions are equipped with either a Switchable Automatic Locking Re- tractor (ALR) or a cinching latch plate or both. Both types of seat belts ar e designed to keep the lap portion of the seat belt tight ar ound the child restraint so that it is not ne ...

  • Fiat 500 (2014) - page 73

    What is the weight limit (child’s weight + weight of the child restraint) for using the T ether Anchor with the seat belt to attach a forward facing child restraint? W eight limit of the Child Restraint Always use the tether anchor when using the seat belt to install a forward facing child restraint, up to the recommended weight limit of the chil ...

  • Fiat 500 (2014) - page 74

    Installing A Child Restraint W ith A Switchable Automatic Locking Retractor (ALR) 1. Place the child seat in the center of the seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit. If the rear seat can be moved forwar d and rearwar d in the vehicle, you may wish to move it ...

  • Fiat 500 (2014) - page 75

    8. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. See the section “Installing Child Restraints Using the T op T ether Anchorage” for directions to attach a tether anchor . 9. T est that the child r estraint is installed ti ...

  • Fiat 500 (2014) - page 76

    4. Finally , pull up on any excess webbing to tighten the lap portion around the child restraint while you push the child restraint rearward and downward into the vehicle seat. 5. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. ...

  • Fiat 500 (2014) - page 77

    Installing Child Restraints Using The T op T ether Anchorage 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. Y ou may need to move the seat forward to provide better access to the tether anchorage. If ther e is no top tether anchorage for that seating position, move the child restraint ...

  • Fiat 500 (2014) - page 78

    W ARNING! • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child restraint top tether strap. • If your vehicle is equipped with a split rear seat, make sure the tether strap does not slip into the opening betwee ...

  • Fiat 500 (2014) - page 79

    CAUTION! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as an indication of difficulty . SAFETY TIPS T ransporting Passengers NEVE ...

  • Fiat 500 (2014) - page 80

    Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing (CO), follow these safety tips: • Do not run the engine in a closed garage or in confined areas any longer than needed to move your veh ...

  • Fiat 500 (2014) - page 81

    Safety Checks Y ou Should Make Inside The V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collis ...

  • Fiat 500 (2014) - page 82

    W ARNING! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury . • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from movi ...

  • Fiat 500 (2014) - page 83

    Periodic Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tir es for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel bolts for tightness. Check the t ...

  • Fiat 500 (2014) - page 84

    ...

  • Fiat 500 (2014) - page 85

    UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 POWER CONVERTIBLE T OP — IF EQUIPPED . .86 ▫ Lowering The Power T op ................. 8 6 ▫ Raising The Power T op .................. 8 6 ▫ Power Convertible T op Relearn Procedur e ..... 8 8 ▫ W ind Stop ........................... 8 9 䡵 MIRRORS ............................. 8 ...

  • Fiat 500 (2014) - page 86

    ▫ EZ Entry Feature ..................... .103 ▫ Memory Feature ..................... .103 ▫ Heated Seats — If Equipped ............ .104 ▫ Head Restraints ...................... .105 䡵 TO OPEN AND CLOSE THE HOOD ........ .107 䡵 LIGHTS ............................ .109 ▫ Multifunction Lever ................... .109 ▫ Headlights ... ...

  • Fiat 500 (2014) - page 87

    ▫ T o V ary The Speed Setting .............. .120 ▫ T o Accelerate For Passing ............... .121 䡵 REAR P ARK ASSIST — IF EQUIPPED ....... .122 ▫ Rear Park Assist Sensors ............... .123 ▫ Rear Park Assist Alerts ................. .123 ▫ Failure Indications .................... .125 ▫ Cleaning The Rear Park Assist System ... ...

  • Fiat 500 (2014) - page 88

    POWER CONVERTIBLE TOP — IF EQUIPPED On vehicles equipped with a power convertible top, the power convertible top switch is located on the overhead console. The switch contains two buttons. The passenger side button, is used to open the power top, and the driver side button, is used to close the power top. NOTE: The power top buttons will operate ...

  • Fiat 500 (2014) - page 89

    NOTE: Rail lubrication is recommended every 2000 cycles, or if scratching noises due to dust are present. Refer to “Fluids, Lubes, and Genuine Part” in “Maintain- ing Y our V ehicle” for information. CAUTION! Failure to follow these cautions may cause interior water damage, stains or mildew on the top material: • A void high-pressure car ...

  • Fiat 500 (2014) - page 90

    Power Convertible T op Relearn Procedure If your power convertible top does not operate in the Auto Opening/Closing mode (automatically opening/ closing to the one-quarter open and three-quarter open comfort stops), or if the trunk lid does not open - the following relearn procedur e may be necessary . 1. Confirm that the door/trunk lid are closed. ...

  • Fiat 500 (2014) - page 91

    Wind Stop The W ind Stop installs in the backseat area of the vehicle. The W ind Stop will not interfere with power top opera- tion. Therefor e, it can remain installed when the top is up. MIRRORS Inside Day/Night Mirror The mirror can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view thr ...

  • Fiat 500 (2014) - page 92

    Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. Y ou can turn the featur e on or off by pr essing the button at the base of the mirror . A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button d ...

  • Fiat 500 (2014) - page 93

    Power Mirrors The power mirr or contr ols ar e located on the driver ’s door trim panel. The power mirror controls consist of a mirr or select switch and a four-way mirror control switch. T o adjust a mirror , press the mirr or select switch to either the L (left) or R (right) to select the mirror you need to adjust. Using the mirror control swit ...

  • Fiat 500 (2014) - page 94

    Spotter Mirror — If Equipped Some models are equipped with a driver’s side spotter mirror . The spotter mirror allows for a greater range of visibility on the driver’s side of the vehicle. Folding Mirrors The exterior mirrors are hinged to allow the mirror to pivot forward or rearwar d to help avoid damage. The mirror has three detent positio ...

  • Fiat 500 (2014) - page 95

    Sun Visors The driver and passenger sun visors are located on the headliner , near the front windshield. The sun visor can be rotated downwar d or up against the door glass. Both sun visors are equipped with courtesy mirrors. BLUE&ME™ HANDS-FREE COMMUNICA TION — IF EQUIPPED Overview W indows Mobile™-based FIA T BLUE&ME™ is a per- so ...

  • Fiat 500 (2014) - page 96

    having to take your eyes off the road or remove your hands from the steering wheel. T o use voice commands you are not required to train the voice recognition system to recognize your voice. This implies that the system is nearly equally performing with different persons, i.e.: the voice recognition system is of the “speaker independent” type. ...

  • Fiat 500 (2014) - page 97

    your mobile phone manually and visually using the steering wheel controls and the instrument panel multi- function display . T o get started with BLUE&ME™ hands-free kit with voice recognition, you have to simply pair your Bluetooth® wir eless technology enabled mobile phone with the system. Pairing is an operation that has to be made only o ...

  • Fiat 500 (2014) - page 98

    • T o interact with BLUE&ME™ you can use either the buttons on the steering wheel or voice commands. W ith voice recognition, you can perform system func- tions by speaking voice commands, also identified as “keywords”. When the system recognizes a keyword, it will respond with the appropriate action. V oice recognition is an easy and c ...

  • Fiat 500 (2014) - page 99

    • Conference Call — you can call another contact while you are engaged in a phone conversation (with Bluetooth® phones supporting this option). • Call W aiting — while engaged in a phone conversa- tion, you can receive notification of another incoming phone call, answer the other incoming phone call, and switch between two ongoing phone co ...

  • Fiat 500 (2014) - page 100

    Message reader functions are managed by the control buttons on the steering wheel or by the BLUE&ME™ voice commands. The BLUE&ME™ message reader enables the following operations: • T o display an indicator on the instrument panel that indicates you have received a new SMS text. It will display the sender’s number/name and will ask y ...

  • Fiat 500 (2014) - page 101

    The media player enables the following operations: • Digital Audio Playback — you can play all your digital audio files (.mp3, .wma, .wav , .aac) or play a customized playlist (.m3u or .wpl format). • Audio File Selection By Category — you can play all audio files of a certain category , e.g.: album, artist or genre. • Playback Options ? ...

  • Fiat 500 (2014) - page 102

    W ARNING! (Continued) wheel. Y our primary responsibility is the safe op- eration of your vehicle. • Read and Follow Instructions: before using your system, read and follow all instructions and safety information provided in this “Owner ’ s Manual”. Failure to do so can result in serious injury or death. • Keep the Owner ’ s Manual in t ...

  • Fiat 500 (2014) - page 103

    Front Seats Forward/Rearward Adjustment The adjusting bar is located at the fr ont of the seats, near the floor . While sitting in the seat, lift up on the bar and move the seat forward or rearward. Release the bar once the desired position is reached. Then, using body pressur e, move forward and rearwar d on the seat to be sure that the seat adjus ...

  • Fiat 500 (2014) - page 104

    W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. Seat Height Adjustment The driver ’s seat height can be raised or lowered by using a lever , located on the outboard side of the seat ...

  • Fiat 500 (2014) - page 105

    EZ Entry Feature The driver and front passenger seats have an EZ entry feature for rear seat passengers. Pull forward on the release lever , located on the outboard side of the seatback, dump the seatback forward, then slide the seat forward to allow access in and out of the rear seat. Lift the seatback upright and push the seat r earward to its lo ...

  • Fiat 500 (2014) - page 106

    Memory Function Option 2 — Seat Back Only Memory: After using the EZ entry function, the seat back may first be returned upright prior to going back to the last fore/aft (memory) position on the tracks. This results in the seat back memory being set only – The track will then be locked forward of its last set fore/aft memory posi- tion. T o the ...

  • Fiat 500 (2014) - page 107

    W ARNING! (Continued) • Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface tempera- ture of the seat. Head Restraints Head restraints are designed to re ...

  • Fiat 500 (2014) - page 108

    T o raise the head restraint, pull upward on the head restraint. T o lower the head restraint, press the push button, located at the base of the head r estraint, and push downward on the head restraint. The Reactive Head Restraints will automatically return to their normal position following a rear impact. If the Reactive Head Restraints do not ret ...

  • Fiat 500 (2014) - page 109

    Rear Head Restraints T o raise the head restraint, pull upward on the head r e- straint. T o lower the head restraint, press the push button, located at the base of the head restraint, and push down- ward on the head restraint. Refer to “Occupant Restraints” in “Things T o Know Before Starting Y our V ehicle” for information on tether routi ...

  • Fiat 500 (2014) - page 110

    2. Rotate the safety catch under the front edge of the hood, near the center , and raise the hood. Lift the hood prop rod that clips to the right side (left side when standing in front of the hood) of the engine compartment. Place the hood prop r od in the hole of hood hinge to secure the hood in the open position. In hot climates, the prop rod may ...

  • Fiat 500 (2014) - page 111

    LIGHTS Multifunction Lever The multifunction lever , located on the left side of the steering wheel, controls the operation of the headlights, headlight beam selection, passing light and turn signals. NOTE: The external lights can only be turned on with the ignition in the ON/RUN position. Headlights Rotate the end of the multifunction lever up- wa ...

  • Fiat 500 (2014) - page 112

    High Beams W ith the low beams activated, push the multi- function lever towards the instrument panel to turn on the high beams. Pull the multifunction lever toward the steering wheel to turn off the high beams. Flash-T o-Pass Y ou can signal another vehicle with your headlights by partially pulling the multifunction lever towar d the steer- ing wh ...

  • Fiat 500 (2014) - page 113

    NOTE: The indicators will automatically turn off when the turn has been completed and the steering wheel is returned to a straight position. Lane Change Assist T ap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. Follow Me Home/Headlight Delay When ...

  • Fiat 500 (2014) - page 114

    Deactivation Pull the multifunction lever toward the steering wheel and hold it for more than two seconds. Interior Lights The interior light switches are located in the overhead console. The interior lights can be set to three different positions (Off/Left Position, Center Position, On/Right Position). Using the switch on the left over head, pr es ...

  • Fiat 500 (2014) - page 115

    • When the doors are unlocked with the Key Fob a 10 second timer is activated. • When the doors are locked with the Key Fob the lights will turn off. Interior Light T iming (On/Right Position) • When all doors are closed a 15 minute timer is activated. NOTE: The timer is deactivated when the key is moved into the ON/RUN position. Front Fog Li ...

  • Fiat 500 (2014) - page 116

    WINDSHIELD WIPERS AND W ASHERS The windshield wiper/washer lever is located on the right side of the steering column. NOTE: The windshield wipers/washers will only oper- ate with the ignition in the ON/RUN position. Front Windshield Wiper Operation There are five differ ent modes of operation for the front windshield wipers. The windshield wiper le ...

  • Fiat 500 (2014) - page 117

    NOTE: The Intermittent function only has one detent but wiper delay will vary with changes in vehicle speed. As vehicle speed increases the delay time will decrease. Low Speed Push the lever downward to the second detent. The wipers will operate at low speed. High Speed Push the lever downward to the third detent. The wipers will operate at high sp ...

  • Fiat 500 (2014) - page 118

    CAUTION! (Continued) • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur . Rear Windshield Wiper Rotate the end of the windshield wiper/washer lever upwar ...

  • Fiat 500 (2014) - page 119

    Rear Windshield W asher Operation Push the windshield wiper/washer lever toward the instrument panel to activate the rear washer . Push and hold the lever for mor e than a half second and the wipers will activate automatically for thr ee cycles after the lever is released. TIL T STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the st ...

  • Fiat 500 (2014) - page 120

    W ARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death. ELECTRONIC SPEED CONTROL When engaged, the Electronic Speed Control takes ...

  • Fiat 500 (2014) - page 121

    NOTE: In order to ensure proper operation, the Elec- tronic Speed Control system has been designed to shut down if multiple Speed Contr ol functions are operated at the same time. If this occurs, the Electronic Speed Contr ol system can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. ...

  • Fiat 500 (2014) - page 122

    T o Deactivate A soft tap on the brake pedal, pushing the CANC button, or normal brake pressur e while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory . Pressing the ON/OFF button or turning the ignition switch OFF erases the set speed memory . T o Resume Speed T o resume a previously set speed, pus ...

  • Fiat 500 (2014) - page 123

    Metric Speed (km/h) • Pressing the RES (+) button once will result in a 2 km/h increase in set speed. Each subsequent tap of the button results in an increase of 2 km/h. • If the button is continually pr essed, the set speed will continue to increase until the button is released, then the new set speed will be established. T o Decrease Speed Wh ...

  • Fiat 500 (2014) - page 124

    NOTE: The Electronic Speed Control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Electronic Speed Control. W ARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant spee ...

  • Fiat 500 (2014) - page 125

    Rear Park Assist Sensors The four Rear Park Assist sensors, located in the r ear fascia/bumper , monitor the area behind the vehicle that is within the sensors’ field of view . The sensors can detect obstacles, in the horizontal direction, from appr oximately 12 in (30 cm) up to 55 in (140 cm) from the center of the rear fascia/bumper and up to 2 ...

  • Fiat 500 (2014) - page 126

    Audible And Visual Signals Supplied By The Rear Park Assist System SIGNAL MEANING INDICA TION Obstacle Distance An obstacle is present within the sensors’ field of view Audible signal (dashboard loudspeaker) • Sound pulses emitted at a rate that increases as the distance decreases. • Emits continuous tone at 12 in (30 cm). • Adjustable volu ...

  • Fiat 500 (2014) - page 127

    Failure Indications A malfunction of the Rear Park Assist sensors or system is indicated, during REVERSE gear engagement, by the instrument panel warning icon. The warning icon is illuminated and a message is displayed on the multifunction display (if equipped). Refer to “Instrument Cluster De- scriptions” in “Understanding Y our Instr ument ...

  • Fiat 500 (2014) - page 128

    • Clean the Rear Park Assist sensors regularly , taking care not to scratch or damage them. The sensors must not be covered with ice, snow , slush, mud, dirt or debris. Failure to do so can result in the system not working properly . The Rear Park Assist system might not detect an obstacle behind the fascia/bumper , or it could provide a false in ...

  • Fiat 500 (2014) - page 129

    W ARNING! • Drivers must be careful when backing up even when using ParkSense®. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. Y ou are responsible for safety and must continue to pay attention to your surroundings. Failu ...

  • Fiat 500 (2014) - page 130

    POWER SUNROOF — IF EQUIPPED The power sunroof roof switch is located in the overhead console. W ARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location acces- sible to children. Occupants, particularly unat- tended children, can become entrapped b ...

  • Fiat 500 (2014) - page 131

    T o Open Press and hold the power sunroof switch rearwar d for approximately one second and the sunroof will stop at the vented position. Press the switch a second time and hold for approximately one second and release, the sunroof will open fully , then stop automatically . This is called “Express Open”. During Express Open operation, any move ...

  • Fiat 500 (2014) - page 132

    Emergency Operation In case of electrical failure the sunroof can be operated with the hex wr ench that is located in the glove box. There is a plug located in the rear of the sunroof opening at the center of the vehicle. Removing the plug reveals a hex opening in the motor assembly of the sunroof. Insert the hex wrench and turn, moving the sunroof ...

  • Fiat 500 (2014) - page 133

    Power is available when the ignition switch is in the ON/RUN or ST ART position. Insert the cigar lighter or accessory plug into the outlet for use. T o preserve the heating element, do not hold the lighter in the heating position. CAUTION! • Do not exceed the maximum power of 160 W atts (13 Amps) at 12 V olts. If the 160 W atts (13 Amps) power r ...

  • Fiat 500 (2014) - page 134

    W ARNING! T o avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 V olt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. Power Outlet Fuse Location ...

  • Fiat 500 (2014) - page 135

    CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., ...

  • Fiat 500 (2014) - page 136

    CUPHOLDERS For the driver and front passenger , cupholders are lo- cated on the floor console between the front seats. For rear passengers, there ar e cupholders located on the floor between the front driver and passenger seats. Front Cupholders Rear Cupholders 134 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...

  • Fiat 500 (2014) - page 137

    STORAGE Glove Compartment The glove compartment is located on the right side of the instrument panel. Pull outward on the glove compart- ment latch to open the glove compartment. Push the glove compartment door upward to close it. CARGO AREA FEA TURES The rear seatbacks have a fold down featur e to allow increased cargo capacity . Push down the rel ...

  • Fiat 500 (2014) - page 138

    Rear Seat Release Buttons Folded Rear Seats 136 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...

  • Fiat 500 (2014) - page 139

    REAR WINDOW FEA TURES Rear Window Defroster The r ear window defr oster button is located in the center of the instrument panel, below the radio. Press this button to turn on the rear window defroster . An indicator in the instrument cluster will illuminate when the rear window defroster is on. The r ear window defroster automatically turns off aft ...

  • Fiat 500 (2014) - page 140

    ...

  • Fiat 500 (2014) - page 141

    UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 INSTRUMENT P ANEL FEA TURES ......... .141 䡵 INSTRUMENT CLUSTER — POP , LOUNGE, 500C ............................... .142 䡵 INSTRUMENT CLUSTER — SPORT ......... .143 䡵 INSTRUMENT CLUSTER DESCRIPTIONS .... .144 䡵 ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) ...................... .156 ? ...

  • Fiat 500 (2014) - page 142

    ▫ T echnical Specifications ................ .178 ▫ Quick Guide ........................ .179 ▫ General Information ................... .182 ▫ Functions And Adjustments ............. .183 ▫ Radio ............................. .191 ▫ SiriusXM Satellite Radio — If Equipped ..... .193 ▫ CD Player .......................... .196 ▫ CD ...

  • Fiat 500 (2014) - page 143

    INSTRUMENT P ANEL FEA TURES 1 — Side V ent 7 — Passenger Air Bag 13 — Storage Compartment 2 — Multifunction Lever – Light Control 8 — Glove Compartment 14 — Shift Lever 3 — Instrument Cluster And W arning Lights 9 — Rear Defrost Button 15 — Sport Button 4 — W indshield W iper , W asher , T rip Computer 10 — Hazard Button 16 ...

  • Fiat 500 (2014) - page 144

    INSTRUMENT CLUSTER — POP , LOUNGE, 500C 142 UNDERST ANDING YOUR INSTRUMENT P ANEL ...

  • Fiat 500 (2014) - page 145

    INSTRUMENT CLUSTER — SPORT 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 143 ...

  • Fiat 500 (2014) - page 146

    INSTRUMENT CLUSTER DESCRIPTIONS 1. Glow Plug Light — If Equipped This vehicle will inhibit engine cranking when the ambient temperature is less than –22° F (–30° C) and the oil temperature sensor reading indicates an engine block heater has not been used. The Glow Plug light will flash during in cold weather for up to 10 sec- onds. An exter ...

  • Fiat 500 (2014) - page 147

    3. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog lights are on. 4. Low Fuel Light When the fuel level reaches appr oximately 1.0 gal- lon (3.8L) this light will turn on, and remain on until fuel is added. 5. High Beam Indicator This light indicates that the headlights ar e on high beam. Pull the turn si ...

  • Fiat 500 (2014) - page 148

    9. Air Bag W arning Light This light will turn on for four seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized studio as soon as possible. Refer to “Occupant Re- straints” in “Things T o Know B ...

  • Fiat 500 (2014) - page 149

    If jump starting is required, r efer to “Jump Starting Procedur es” in “What T o Do In Emergencies”. 13. Power Steering System W arning This light is used to manage the electrical warning of the EPS (Power Steering System). Refer to “Power Steering” in “Starting and Operating” for further information. 14. Electronic Throttle Control ...

  • Fiat 500 (2014) - page 150

    As an added safety feature, your vehicle has been equipped with a T ire Pressur e Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly , when the low tire pressur e telltale illumi- nates, you should stop and check your tires as soon as possible, and infla ...

  • Fiat 500 (2014) - page 151

    CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause se ...

  • Fiat 500 (2014) - page 152

    Certain conditions, such as a loose or missing gas cap, poor fuel quality , etc., may illuminate the MIL after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not require towing. CAUTION! Prolonged driving with the Malfunc ...

  • Fiat 500 (2014) - page 153

    If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the ve- hicle. If the temperature reading does not return to normal, turn the engine off immediately and call for service. Refer to “If Y our Engine Overheats” in “What T o Do In ...

  • Fiat 500 (2014) - page 154

    The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application. 21. Electronic Stability Control OFF (ESC OFF) Indicator Light This light indicates the Electronic Stability Con- trol system ...

  • Fiat 500 (2014) - page 155

    If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is r equired. However , the conventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as po ...

  • Fiat 500 (2014) - page 156

    The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer . It should not be allowed to exceed the upper limits of the normal operating range. CAUTION! Driving with a hot engine cooling system could damage your vehicle. If all the segments of the temperature gauge are li ...

  • Fiat 500 (2014) - page 157

    odometer needs to be repaired or serviced, the repair technician should leave the odometer reading the same as it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a good idea for you to make a ...

  • Fiat 500 (2014) - page 158

    ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display that is located in the instrument cluster . The EVIC consists of the following: • System Status • V ehicle Information W arning Message Displays • Personal Settings (Customer-Pr ogrammable Features) • Outs ...

  • Fiat 500 (2014) - page 159

    EVIC Displays 1 — T emperature Indicator 6 — Message Display 2 — Fuel Level Gauge 7 — Coolant T emperature Gauge 3 — Clock 8 — Digital Speedometer 4 — Odometer 9 — Ice W arning Indicator 5 — Sport Mode 10 — Gear Shift Indicator (GSI) 1 — Ice W arning Indicator 6 — Message Display 2 — T emperature Indicator 7 — Coolant T ...

  • Fiat 500 (2014) - page 160

    EVIC Control Buttons Press the MENU button briefly to access the menu and/or go to next scr een or to confirm the required menu option. Press and hold the MENU button (approximately one second) to return to the main screen. Press the UP button to scr oll upward thr ough the displayed menu and the related options or to incr ease the displayed value. ...

  • Fiat 500 (2014) - page 161

    • Set Date • See Radio • Speed Display • Autoclose • Units • Language • Buzzer V olume • Button V olume • Daylights (D.R.L.) • Hill Start • T ir e Pressure • Unlock Driver Door First • Unlock All Doors • Exit Menu Selecting An Option Of The Main Menu W ithout Submenu 1. Briefly press the MENU button to select the main me ...

  • Fiat 500 (2014) - page 162

    Selecting An Option Of The Main Menu W ith Submenu 1. Briefly press the MENU button to display the first submenu option. 2. Press the UP or DOWN button (by single presses) to scroll through all the submenu options. 3. Briefly press the MENU button to select the displayed submenu option and to open the relevant setup menu. 4. Press the UP or DOWN bu ...

  • Fiat 500 (2014) - page 163

    1. T urn the ignition switch to the ON position. (do not start the engine.) 2. Fully depress the accelerator pedal slowly , three times within 10 seconds. 3. T urn the ignition switch to the OFF/LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary , repeat ...

  • Fiat 500 (2014) - page 164

    NOTE: If the reset operation occurs in the presence of the screens concerning T rip A or T rip B, only the infor- mation associated with T rip A or T rip B functions will be reset. Start Of T rip Procedure W ith the ignition on, press and hold the TRIP button for over one second to reset. Exit T rip T o exit the T rip function, wait until all the v ...

  • Fiat 500 (2014) - page 165

    • A verage speed B • T ravel time B (driving time) NOTE: “T rip B” functions may be excluded (see “T rip B Data”). “Range” and “Instantaneous consumption” can- not be reset. V alues Displayed Range This indicates the distance which may be traveled with the fuel remaining in the tank, assuming that driving conditions will not cha ...

  • Fiat 500 (2014) - page 166

    A verage Speed This value shows the vehicle’s average speed as a func- tion of the overall time elapsed since the last reset. T ravel T ime This value shows the time elapsed since the last reset. Personal Settings (Customer-Programmable Features) Dimmer The EVIC display is provided with a light sensor capable of detecting environmental light cond ...

  • Fiat 500 (2014) - page 167

    3. When the function is activated (On), briefly press the MENU button to display the presently set activation speed. Pressing the UP or DOWN buttons selects the speed limit. Press MENU to confirm selec- tion. NOTE: The setting can be increased or decreased by 5 mph or km/h each time the UP/DOWN button is pressed for speed settings above 20 mph (32 ...

  • Fiat 500 (2014) - page 168

    For activation / deactivation, proceed as follows: 1. Briefly press the MENU button. “On” or “Off” will flash on the display (according to previous setting). 2. Press the UP or DOWN button to select the setting. 3. Briefly press the MENU button to go back to the menu screen, or press and hold the MENU button (appr oxi- mately one second) to ...

  • Fiat 500 (2014) - page 169

    NOTE: • The setting will incr ease or decr ease by one unit each time the UP or DOWN button is pressed. Press and hold the button to increase/decrease the setting rapidly . Save the setting by briefly pressing the button when you approach the required setting. • Briefly pr ess the MENU button to r eturn to the “T ime” sub-function. • When ...

  • Fiat 500 (2014) - page 170

    NOTE: The setting will increase or decrease by one unit each time the UP or DOWN button is pressed. Press and hold the UP or DOWN button to increase/decr ease the setting rapidly . Save the setting by briefly pressing the button when you approach the requir ed setting. • Briefly press the MENU button to go back to the menu screen, or press and ho ...

  • Fiat 500 (2014) - page 171

    T o activate (On) or to deactivate (Off) the speed display feature, proceed as follows: 1. Briefly pr ess the MENU button. “MPH”, “km/h”, then “Off” will flash on the display (according to previous setting). 2. Press the UP or DOWN button to select display deactivation “Off”, “MPH” or “km/h”. 3. Briefly press the MENU button ...

  • Fiat 500 (2014) - page 172

    T o set the required unit, proceed as follows: 1. Briefly press the MENU button to display the three sub-menus. 2. Press the UP or DOWN button to navigate the three sub-menus. 3. Select the r equired sub-menu and then briefly press the MENU button. 4. When accessing the “Distance” submenu: briefly press the MENU button. Either “mi” or “km ...

  • Fiat 500 (2014) - page 173

    5. Briefly press the MENU button to return to the sub-menu. When you have made the r equired settings, briefly press the MENU button to go back to the sub-menu scr een, or press and hold the MENU button (approximately one second) to go back to the main screen without storing the settings. Language (Selecting The Language) The messages can be displa ...

  • Fiat 500 (2014) - page 174

    3. Briefly press the MENU button to go back to the menu screen, or press and hold the MENU button (appr oxi- mately one second) to go back to the main screen without storing the settings. Button V olume (Button V olume Adjustment) This function may be used to adjust the volume of the beep accompanying the buttons. MENU ,U P or DOWN buttons can be a ...

  • Fiat 500 (2014) - page 175

    4. Briefly press the MENU button to go back to the menu screen, or press and hold the button (approximately one second) to go back to the main screen without storing the settings. GSI (Gear Shift Indicator) This function may be used to set the Gear Shift Indicator in two submenus: “Fuel Econ On” and “Fuel Econ Off.” • Fuel Econ On – tur ...

  • Fiat 500 (2014) - page 176

    Hill Start Assist This function is used when starting a vehicle from a stop on a hill. Hill Start Assist maintains the same level of brake pressure the driver applied for a short period of time after the foot has been removed from the brake pedal. Proceed as follows to switch this function on or off: 1. Briefly press the MENU button. “On” or ? ...

  • Fiat 500 (2014) - page 177

    Drivers Door is selected, you must press the RKE trans- mitter UNLOCK button twice to unlock the passenger door . When All Doors is selected, both of the doors will unlock on the first pr ess of the RKE transmitter UNLOCK button. T o make your selection, press and release the SELECT button until “Unlock Driver Door” or “All Doors” appears. ...

  • Fiat 500 (2014) - page 178

    Introduction The radio has been designed according to the specifica- tions of the passenger compartment, with a personalized design to match the style of the dashboard. If the radio has BLUE&ME™, refer to the appr opriate “BLUE&ME™ User ’s Manual” for further information. The instructions for use are given below and we recom- mend ...

  • Fiat 500 (2014) - page 179

    CDs The presence of dirt, scratches or distortions on the CDs could cause skipping and poor sound quality while it is playing. For optimal playback conditions, follow these guidelines: • Only use branded CDs. • Clean every CD thoroughly removing any finger marks or dust using a soft cloth. Hold CDs by the outside and clean them from the middle ...

  • Fiat 500 (2014) - page 180

    where it may be, for example, “COPY CONTROL”, “COPY PROTECTED”, “THIS CD CANNOT BE PLA YED ON A PC/MAC”. • The CD player is capable of reading most compression systems currently in use, following the development of these systems, the reading of all compression formats is not guaranteed. T echnical Specifications The complete system co ...

  • Fiat 500 (2014) - page 181

    Quick Guide Radio Controls BUTTON GENERAL FUNCTIONS MODE On Short button press Off Short button press TUNER AM, FM, SA T (if equipped) source selection Short repeated button press A-B-C Cycles A, B, C presets for AM, FM, SA T (if equipped) Short repeated button press MEDIA CD/AUX/Media Player (if equipped and present) source selection Short repeate ...

  • Fiat 500 (2014) - page 182

    BUTTON GENERAL FUNCTIONS MODE (Mute/Pause Button) V olume activation/deactivation (Mute/Pause) Short button press AUDIO Audio adjustments: low tones (BASS), high tones (TREBLE), left/ right balance (BALANCE), fr ont/ rear balance (F ADER) Menu activation: short button press Adjustment type selection: press or Adjustment of values: press or (Informa ...

  • Fiat 500 (2014) - page 183

    BUTTON RADIO FUNCTIONS MODE Radio Station Search: • Automatic Search • Manual Search Automatic search: press buttons or (long press for fast forward) Manual search: press buttons or (long press for fast forward) 12345 Current radio station storing Long button pr ess for memory preset 1 to 5 respectively Stored station recall Short button press ...

  • Fiat 500 (2014) - page 184

    General Information The radio offers the following functions: Radio Section • PLL tuning with FM/AM bands • RBDS (Radio Broadcast Data System) • Automatic/manual station tuning • FM Multipath detector • Manual storing of 25 stations (base radio) and 40 stations (if equipped with Satellite): 15 on FM band (5 on FMA, 5 on FMB, 5 on FMC), 10 ...

  • Fiat 500 (2014) - page 185

    CD/MP3 Section • MP3-Info function (ID3-T AG) • Folder selection (previous/next) • T rack selection (forward/backward) • Fast forward/rewind through tracks • MP3 Display function: display of folder name, ID3- T AG information, time elapsed since the start of the track, name of the file • Playing audio or data CD, CD-R and CD-R W Audio S ...

  • Fiat 500 (2014) - page 186

    Selecting The Radio Functions By pressing the TUNER button briefly and repeatedly , the following audio sources can be selected cyclically: • AM, FM and Satellite Bands (if equipped) Selecting The CD Function By briefly pressing the MEDIA button, the CD audio source can be selected (only if a CD is loaded). V olume Adjustment T o adjust the volum ...

  • Fiat 500 (2014) - page 187

    Use the buttons or to scroll through the Menu functions. T o change the setting of the selected function, use the or buttons. The current status of the selected function appears on the display . The functions managed by the Audio Menu are: • BASS (Bass adjustment) • MIDRANGE (Midrange adjustment) • TREBLE (T reble adjustment) • BALANCE (rig ...

  • Fiat 500 (2014) - page 188

    Balance Adjustment Proceed as follows: 1. Press AUDIO button. 2. Press the or button to set “Balance” in the AUDIO menu. 3. Press the button to increase the sound from the left speakers or the button to increase the sound from the right speakers. By pressing the or buttons briefly , the levels will change progressively . By pressing them down l ...

  • Fiat 500 (2014) - page 189

    Loudness Function — If Equipped The Loudness function improves the volume of the sound while listening at low volumes, increasing the bass and treble. T o activate/deactivate this function, select the “Loud- ness” setting in the AUDIO menu. The condition of the function (on or off) is shown on the display for a few seconds by the wording “L ...

  • Fiat 500 (2014) - page 190

    User EQ Settings Function — If Equipped T o set a personalized equalizer adjustment: 1. Press AUDIO button. 2. Use the or buttons to set EQ function. 3. Use or buttons to select ⬙ EQ User . ⬙ 4. Press MENU button to start adjusting equalizer . 5. On the display a seven bar graph will appear , in which each bar represents a frequency . Select ...

  • Fiat 500 (2014) - page 191

    • SiriusXM T elephone Number • System Reset • Speed V olume • On V olume Limit Press the MENU button again to exit the Menu function. Speed V olume Function — If Equipped This function automatically adapts the volume level to the speed of the car , turning up the volume when the speed increases to maintain the ratio with the noise level i ...

  • Fiat 500 (2014) - page 192

    • “On volume limit: off” – The radio will come on at the same volume as before it was switched off. The volume level can be between 0 and 40. Use the buttons or to change the setting. NOTE: • Using the Menu it is only possible to adjust the activation/deactivation of the function and not the minimum or maximum volume value. • If the bat ...

  • Fiat 500 (2014) - page 193

    System Reset Function This function is used to r estore all settings to the factory values. The options are: • NO — No restore intervention. • YES — The default parameters will be restor ed. Dur- ing such operation, the wording “Resetting” appears on the display . At the end of the operation, the sour ce does not change and the previous ...

  • Fiat 500 (2014) - page 194

    Preset Buttons The buttons numbered from 1 to 5 are used to set the following pre-selections: • 15 in the FM band (5 in FMA, 5 in FMB, 5 in FMC • 10 in the AM band (5 in AMA, 5 in AMB) • 15 in SA T (if so equipped) (5 SA T A, 5 SA TB, 5 SA TC) T o listen to a preset station, select the desired frequency band and then briefly press the corresp ...

  • Fiat 500 (2014) - page 195

    Stereophonic Broadcasters If the incoming signal is weak, the reproduction is automatically switched from Stereo to Mono. SiriusXM Satellite Radio — If Equipped SiriusXM Satellite Radio W ith over 130 channels, SiriusXM Satellite Radio brings you more of what you love. Get 69 channels of 100% commercial-fr ee music, plus all of your favorite spor ...

  • Fiat 500 (2014) - page 196

    The Program T ypes available are: All, Pop, Rock, Electronic/Dance, Hip-Hop/R&B, Country , Christian, Jazz/Standards, Classical, Latin/W orld, Sports, Enter- tainment, T alk, News, NPR, Comedy , Family & Health, Religion, T raffic/W eather . Y ou can find the SiriusXM current terms and conditions at http://www .sirius.com. Re-Subscribe T o ...

  • Fiat 500 (2014) - page 197

    SiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc. and its subsidiaries. SiriusXM Radio requires a subscription, sold separately after trial subscription included with vehicle purchase. Prices and programming ar e provided by SiriusXM and are subject to change. Subscriptions governed by T erms & Condi- tions availabl ...

  • Fiat 500 (2014) - page 198

    CD Player Introduction This chapter describes the operation of the CD player only . T o operate the radio, refer to the description in the “Functions and Adjustments” chapter . CD Player Selection T o activate the CD player built into the equipment, proceed as follows: • Load a CD with the equipment switched on. The first track will start to ...

  • Fiat 500 (2014) - page 199

    Press the button with the radio turned on, to activate the motorized CD ejection system. After ejection, the last audio source listened to before playing the CD will be heard. If the CD is not removed fr om the radio, it will automati- cally be reloaded about 20 seconds later but will not resume playing until the ⬙ MEDIA ⬙ button is pressed to ...

  • Fiat 500 (2014) - page 200

    ...

  • Fiat 500 (2014) - page 201

    The specifications and operating conditions for playing MP3 files are the following: • The CD-ROMs used should be burned in accordance with ISO standard 9660. • The music files should have the extension “.mp3” or “.wma” files with a different extension will not be repr oduced. • The sampling frequencies that can be repr oduced are: 44 ...

  • Fiat 500 (2014) - page 202

    When one of the ID3-T AG pieces of information is chosen to be displayed (T itle, Artist, Album) and this informa- tion has not been recorded for the track played, the text ⬙ UNKNOWN ⬙ will be displayed for that field. Selection Of Next/Previous Folder Press the button to select a next folder or the but- ton to select the previous folder . The ...

  • Fiat 500 (2014) - page 203

    Source Can Not Be Selected Nothing has been loaded. Load the CD or the MP3 CD to be listened to. CD Player The CD Does Not Play: The CD is dirty . Clean the CD. The CD is scratched. T ry using another CD. The CD Can Not Be Loaded: A CD is already loaded. Press the button and r emove the CD. MP3 File Reading T rack Skips While Playing Mp3 Files: The ...

  • Fiat 500 (2014) - page 204

    iPod®/USB/MEDIA PLA YER CONTROL — IF EQUIPPED This feature allows an iPod® or external USB device to be plugged into the USB port, located in the glove compartment. Refer to the appr opriate Blue&Me™ radio User ’s Manual for iPod® or external USB device support capability . STEERING WHEEL AUDIO CONTROLS The remote sound system controls ...

  • Fiat 500 (2014) - page 205

    The right-hand control is a rocker -type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume, and pressing the bottom of the rocker switch will decrease the volume. Pressing the center button will make the radio switch between the various modes a ...

  • Fiat 500 (2014) - page 206

    CD Player Operation Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track, or to the beginning of the pr evious track if it is within one second after the current track begins to play . If you press the switch up or down twice, it plays the secon ...

  • Fiat 500 (2014) - page 207

    NOTE: If you experience dif ficulty in playing a particular disc, it may be damaged (e.g., scratched, reflective coat- ing removed, a hair , moisture or dew on the disc) oversized, or have protection encoding. T ry a known good disc before considering disc player service. RADIO OPERA TION AND MOBILE PHONES Under certain conditions, the mobile phone ...

  • Fiat 500 (2014) - page 208

    1. T emperature Contr ol Rotate this control to regulate the temperature of the air inside the passenger compartment. Rotating the dial to the left into the blue area of the scale indicates cooler temperatures, while rotating to the right into the red area indicates warmer temperatures. 2. Blower Control Rotate this control to regulate the amount o ...

  • Fiat 500 (2014) - page 209

    • Panel Air is directed through the outlets in the instru- ment panel. These outlets can be adjusted to direct airflow . NOTE: The center instrument panel outlets can be aimed so that they ar e directed toward the r ear seat passengers for maximum airflow to the rear . • Bi-Level Air is directed thr ough the panel and floor outlets. • Floor A ...

  • Fiat 500 (2014) - page 210

    5. A/C Button Press this button to engage the Air Conditioning. A light will illuminate when the Air Conditioning system is engaged. MAX A/C For maximum cooling, use the A/C and recir culation modes at the same time. ECONOMY MODE If economy mode is desir ed, press the A/C button to turn OFF the indicator light and the A/C compressor . Then, move th ...

  • Fiat 500 (2014) - page 211

    1. AUTO T emperatur e Control (A TC) Button Controls airflow , temperatur e, distribution, and air recircu- lation automatically . Press and release to select. Performing this function will cause the A TC to switch between manual mode and automatic modes. Refer to “Automatic Opera- tion” for more information. 2. A/C Button Press and r elease to ...

  • Fiat 500 (2014) - page 212

    8. Panel Mode Air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow . Performing this function will cause the A TC to switch into manual mode. NOTE: The center instrument panel outlets can be aimed so that they ar e directed toward the r ear seat passengers for maximum airflow to the rear . 9. ...

  • Fiat 500 (2014) - page 213

    Automatic Operation 1. Press the AUTO button on the Automatic T emperature Control (A TC) Panel, the indicator will illuminate when on. 2. Next, adjust the temperature you would like the system to maintain by adjusting the temperature con- trol buttons. Once the desir ed temperature is dis- played, the system will achieve and automatically maintain ...

  • Fiat 500 (2014) - page 214

    Manual Operation This system offers a full complement of manual override features. NOTE: Each of these features operates independently from each other . If any featur e is contr olled manually , temperature control will continue to operate automati- cally . Blower Control There are 12 fixed blower speeds. Use the blower control up or down buttons t ...

  • Fiat 500 (2014) - page 215

    Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Bi-Level Air is directed thr ough the panel and floor outlets. Press and release the Panel mode button and Floor mode button to enter Bi-Level mode, the indicators illuminate when ON. Performing this function will ca ...

  • Fiat 500 (2014) - page 216

    NOTE: • If the system is in Mix or Defrost Mode, the A/C can be turned of f, but the A/C system shall r emain active to prevent fogging of the windows. • If fog or mist appears on the windshield or side glass, select Defrost mode and increase blower speed. Recirculation Control When outside air contains smoke, odors, or high humidity , or if ra ...

  • Fiat 500 (2014) - page 217

    As the temperature gets colder , it may be necessary to direct air onto the windshield. Adjust the temperature control and blower speed to maintain comfort. Higher blower speeds will reduce fogging. Interior fogging on the windshield can be quickly removed by selecting the Defrost mode. Regular cleaning of the inside of the windows with a non-filmi ...

  • Fiat 500 (2014) - page 218

    V acation Storage Anytime you stor e your vehicle, or keep it out of service (i.e., vacation) for two weeks or mor e, run the air conditioning system at idle for about five minutes in the fresh air using the high blower setting. This will ensure adequate system lubrication to minimize the possibility of compressor damage when the air conditioning s ...

  • Fiat 500 (2014) - page 219

    ST ARTING AND OPERA TING CONTENTS 䡵 ST AR TING PROCEDURES ............... .221 ▫ Manual T ransmission — If Equipped ...... .221 ▫ Automatic T ransmission — If Equipped .... .221 ▫ Normal Starting ...................... .221 ▫ Cold W eather Operation ............... .222 ▫ Extended Park Starting ................. .222 ▫ If Engine F ...

  • Fiat 500 (2014) - page 220

    䡵 AUTOSTICK® — IF EQUIPPED ........... .235 ▫ Operation .......................... .235 䡵 DRIVING ON SLIPPER Y SURF ACES ........ .237 ▫ Acceleration ........................ .237 ▫ T raction ........................... .237 䡵 DRIVING THROUGH W A TER ............ .238 ▫ Flowing/Rising W ater ................. .238 ▫ Shallow Stand ...

  • Fiat 500 (2014) - page 221

    ▫ T ir e T erminology And Definitions ......... .260 ▫ T ir e Loading And T ire Pr essure .......... .261 䡵 TIRES — GENERAL INFORMA TION ....... .265 ▫ T ir e Pressure ....................... .265 ▫ T ir e Inflation Pressur es ................ .266 ▫ T ir e Pressures For High Speed Operation . . . .268 ▫ Radial Ply T ires .......... ...

  • Fiat 500 (2014) - page 222

    ▫ MMT In Gasoline .................... .287 ▫ Materials Added T o Fuel ............... .288 ▫ Fuel System Cautions .................. .288 ▫ Carbon Monoxide W arnings ............ .289 䡵 ADDING FUEL ....................... .289 ▫ Fuel Filler Cap (Gas Cap) .............. .289 ▫ Loose Fuel Filler Cap Message ........... .291 䡵 TRAILER ...

  • Fiat 500 (2014) - page 223

    ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be se ...

  • Fiat 500 (2014) - page 224

    T urn the ignition switch to the A VV (ST AR T) position and release it when the engine starts. If the engine fails to start within 10 seconds, turn the ignition switch to the ST OP (OFF/LOCK) position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedur e. Cold Weather Operation T o prevent possible engine damage while starting a ...

  • Fiat 500 (2014) - page 225

    3. If the engine fails to start within 10 seconds, place the ignition to the STOP (OFF/LOCK) position, wait five seconds to allow the starter to cool, then repeat the Extended Park Starting procedur e. 4. If the engine fails to start after 8 attempts, allow the starter to cool for at least 10 minutes, then repeat the procedur e. If Engine Fails T o ...

  • Fiat 500 (2014) - page 226

    T urbocharger “Cool Down” This vehicle is equipped with an after-run pump to cool the turbocharger after the engine is shut off. Depending on the type of driving and the amount of cargo, the pump will run for up to 10 minutes after the engine has been shut of f to cir culate coolant thr ough the turbocharger . Although the pump is rubber -mount ...

  • Fiat 500 (2014) - page 227

    NOTE: T o shift into REVERSE from NEUTRAL, lift the ring under the knob and, at the same time move the gearshift lever to the right and then backward. Use each gear in numerical order; do not skip a gear . Be sure the transmission is in first gear , not third, when starting from a standing position. Damage to the clutch can result from starting in ...

  • Fiat 500 (2014) - page 228

    Recommended Shift Speeds T o use your manual transmission for optimal fuel economy , it should be upshifted as listed in the following table. Manual T ransmission Recommended Shift Speeds Units In mph (km/h) Engine Size Accel- era- tion Rate 1t o2 2t o3 3t o4 4t o5 1.4L/ 1.4L T urbo Engine Accel 14 (23) 23 (37) 29 (47) 38 (61) Cruise 12 (19) 18 (29 ...

  • Fiat 500 (2014) - page 229

    AUTOMA TIC TRANSMISSION — IF EQUIPPED CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift between ...

  • Fiat 500 (2014) - page 230

    W ARNING! (Continued) locked in P ARK, securing the vehicle against un- wanted movement. • When leaving the vehicle, always remove the igni- tion key and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A chi ...

  • Fiat 500 (2014) - page 231

    Six-Speed Automatic T ransmission The transmission gear position display (located in the instrument cluster) indicates the transmission gear range. Y ou must pr ess the brake pedal to move the shift lever out of P ARK (Refer to “Brake/T ransmission Shift Inter- lock System” in this section). T o drive, move the shift lever from P ARK or NEUTRAL ...

  • Fiat 500 (2014) - page 232

    The transmission shift lever has P ARK, REVERSE, NEU- TRAL, DRIVE, and AutoStick® shift positions. Manual shifts can be made using the AutoStick® shift contr ol (refer to “AutoStick®” in this section for further informa- tion). Moving the shift lever forward (-) or rearward (+) while in the AutoStick® position (beside the DRIVE position) wi ...

  • Fiat 500 (2014) - page 233

    W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle move- ment and possible injury or damage. • Y our vehicle could move and injure you and others if it is not completely in P ARK. Check by trying to move the shift lever out of P ARK with the b ...

  • Fiat 500 (2014) - page 234

    W ARNING! (Continued) warned not to touch the parking brake, brake pedal or the shift lever . • Do not leave the ignition key/Key Fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle. CAUTION! • Before moving the shift lever out of P ARK, you must turn the ...

  • Fiat 500 (2014) - page 235

    NEUTRAL (N) Use this range when the vehicle is standing for pr olonged periods with the engine running. The engine may be started in this range. Apply the parking brake and shift the transmission into P ARK if you must leave the vehicle. NOTE: Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices t ...

  • Fiat 500 (2014) - page 236

    If the transmission temperature exceeds normal operat- ing limits, the transmission contr oller will expand the range of torque converter clutch engagement. This is done to prevent transmission damage due to overheat- ing. During cold temperatures, transmission operation may be modified depending on engine coolant temperature. Normal operation will ...

  • Fiat 500 (2014) - page 237

    NOTE: Even if the transmission can be reset, we r ecom- mend that you visit your authorized studio at your earliest possible convenience. Y our authorized studio has diagnostic equipment to determine if the problem could recur . If the transmission cannot be reset, authorized studio service is required. AUTOSTICK® — IF EQUIPPED AutoStick® is a ...

  • Fiat 500 (2014) - page 238

    • The transmission will automatically downshift to first gear when coming to a stop. After a stop, the driver should manually upshift (+) the transmission as the vehicle is accelerated. • W ith six-speed automatic transmission, you can start out (from a stop) in first, second, or thir d gear . Starting out in second or third gear can be helpful ...

  • Fiat 500 (2014) - page 239

    DRIVING ON SLIPPERY SURF ACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a differ ence in the surface traction under the front (driving) wheels. W ARNING! Rapid acceleration on slippery surfaces is dang ...

  • Fiat 500 (2014) - page 240

    DRIVING THROUGH W A TER Driving through water more than a few inches/ centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising Water W ARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-of f). Flow- ing water can wear away the road or path’s ...

  • Fiat 500 (2014) - page 241

    CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing water . ...

  • Fiat 500 (2014) - page 242

    POWER STEERING The electric power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will vary its assist to provide light efforts while parking and good feel while driving. If the electric steering system experiences a fault that prevents it from providing assist, you will still ha ...

  • Fiat 500 (2014) - page 243

    NOTE: • Even if the power steering assistance is no longer operational, it is still possible to steer the vehicle. Under these conditions there will be a substantial increase in steering effort, especially at low speeds and during parking maneuvers. • If the condition persists, see your authorized studio for service. P ARKING BRAKE Before leavi ...

  • Fiat 500 (2014) - page 244

    When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. The parking brake should always be applied whenever the driver is not in the vehicle. W ARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to b ...

  • Fiat 500 (2014) - page 245

    CAUTION! If the Brake W arning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized studio immediately . SPORT MODE Manual T ransmission — If Equipped The Sport mode increases steering feedback to the driver with slight incr eases in ef fort and throttle pedal-t ...

  • Fiat 500 (2014) - page 246

    Automatic T ransmission — If Equipped The Sport mode increases steering feedback to the driver with slight increase in effort and changes the transmis- sion shift schedules for more aggressive shifting. This driving mode is useful while driving on twisty r oads where more steering precision is desired in spirited cornering. 1. T o activate the Sp ...

  • Fiat 500 (2014) - page 247

    BRAKE SYSTEM In the event power assist is lost for any reason (for example; repeated brake applications with the engine off), the brakes will still function. The effort required to brake the vehicle will be significantly more than that requir ed with the power system operating. If either of the two hydraulic systems loses normal capability , the re ...

  • Fiat 500 (2014) - page 248

    W ARNING! • Pumping the Anti-Lock Brakes will diminish their effectiveness and may lead to a collision. Pumping makes the stopping distance longer . Just press firmly on your brake pedal when you need to slow down or stop. • The Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increa ...

  • Fiat 500 (2014) - page 249

    Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressure to prevent wheel lockup and help avoid skidding on slippery surfaces during braking. Refer to “Four-Wheel Anti-Lock Brake System” in “Start- ing and Operating” for further inf ...

  • Fiat 500 (2014) - page 250

    T raction Control System (TCS) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability . A feature of the TCS system functions similar to a limited-slip differential and contro ...

  • Fiat 500 (2014) - page 251

    HSA Activation Criteria The following criteria must be met in order for HSA to activate: • V ehicle must be stopped. • V ehicle must be on a 2.5% (manual transmission) or 7% grade or greater (automatic transmission) hill. • Gear selection matches vehicle uphill direction (i.e., vehicle in NEUTRAL (manual transmission), vehicle facing uphill i ...

  • Fiat 500 (2014) - page 252

    Electronic Stability Control (ESC) This system enhances dir ectional control and stability of the vehicle under various driving conditions. ESC cor- rects for oversteering or understeering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the oversteering or understeering condi- tion. Engine power may also be ...

  • Fiat 500 (2014) - page 253

    NOTE: The ESC Off switch is located left of the steering column (Manual T ransmission Only). W ARNING! The Electronic Stability Control (ESC) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESC cannot prevent all accidents, including those resulting fr ...

  • Fiat 500 (2014) - page 254

    ESC Operating Modes The ESC system has two available operating modes. Full On This is the normal operating mode for ESC. Whenever the vehicle is started, the ESC system will be in On mode. This mode should be used for most driving situations. ESC should only be turned to Partial Off for specific reasons as noted below . Partial Off This mode is ent ...

  • Fiat 500 (2014) - page 255

    W ARNING! • When in “Partial Off” mode, the TCS functionality of ESC, (except for the limited slip feature de- scribed in the TCS section), has been disabled and the “ESC Off Indicator Light” will be illuminated. When in “Partial Off” mode, the engine power reduction feature of TCS is disabled, and the enhanced vehicle stability offer ...

  • Fiat 500 (2014) - page 256

    NOTE: • The ESC Activation/Malfunction Indicator Light and the ESC OFF Indicator Light come on momentarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESC system will be ON even if it was turned off previously . The ESC OFF Indicator Light indicates the Electronic Stability Control (ESC) is partially o ...

  • Fiat 500 (2014) - page 257

    NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards. T ires designed to this standard have the tire size molded into the sidewal ...

  • Fiat 500 (2014) - page 258

    T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ ....blank.... ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards To rS = T emporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = As ...

  • Fiat 500 (2014) - page 259

    EXAMPLE: R = Construction code — ⬙ R ⬙ means radial construction — ⬙ D ⬙ means diagonal or bias construction 15 = Rim diameter in inches (in) Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a ...

  • Fiat 500 (2014) - page 260

    EXAMPLE: Load Identification: ⴖ ....blank.... ⴖ = Absence of any text on the sidewall of the tire indicates a Standard Load (SL) tire Extra Load (XL) = Extra load (or reinfor ced) tire Light Load (LL) = Light load tire C, D, E, F , G = Load range associated with the maximum load a tire can carry at a specified pressur e Maximum Load — Maximum ...

  • Fiat 500 (2014) - page 261

    EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of T ransportation — This symbol certifies that the tire is in compliance with the U.S. Department of T ransportation tire safety standards and is approved for highway use MA = Code repr esenting the tire manufacturing location (two digits) L9 = Code repr esenting the tire size (two digits) ABCD = Cod ...

  • Fiat 500 (2014) - page 262

    Tire T erminology And Definitions T erm Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door . Cold T ire Inflation Pressure Cold tire inflation pressur e is defined as the tire pressur e after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after s ...

  • Fiat 500 (2014) - page 263

    Tire Loading And Tire Pressure T ire And Loading Information Placard Location NOTE: The pr oper cold tire inflation pressur e is listed on the driver ’s side B-Pillar or the rear edge of the driver’s side door . T ire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried ...

  • Fiat 500 (2014) - page 264

    3. T ir e size designed for your vehicle. 4. Cold tir e inflation pressur es for the front, rear , and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold ...

  • Fiat 500 (2014) - page 265

    4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 lbs (68 kg) = 750 lbs (340 kg), and 1400 lbs ...

  • Fiat 500 (2014) - page 266

    264 ST ARTING AND OPERA TING ...

  • Fiat 500 (2014) - page 267

    W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, af fect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tire inflation pressur e is essential to the safe and satisfactory ...

  • Fiat 500 (2014) - page 268

    W ARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pressures can cause uneven wear pat- terns to develop across the tire tread. These abno ...

  • Fiat 500 (2014) - page 269

    CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressur e”. Cold tir e inflation pr essure is defined as the tire press ...

  • Fiat 500 (2014) - page 270

    Tire Pressures For High Speed Operation The manufacturer advocates driving at safe speeds and within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressur e is very important. Increased tire pressure and reduced vehicle loading may be required for h ...

  • Fiat 500 (2014) - page 271

    Consult an authorized tire dealer for tire repairs and additional information. Damaged Run Flat tires, or Run Flat tir es that have experienced a loss of pressure should be replaced imme- diately with another Run Flat tire of identical size and service description (Load Index and Speed Code). Tire T ypes All Season T ires — If Equipped All Season ...

  • Fiat 500 (2014) - page 272

    If you need snow tires, select tir es equivalent in size and type to the original equipment tir es. Use snow tir es only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. Snow tires generally have lower speed ratings than what was originally equipped with your vehicle and should not be operated at susta ...

  • Fiat 500 (2014) - page 273

    Spare Tires — If Equipped NOTE: For vehicles equipped with TIREFIT instead of a spare tire, please refer to “TIREFIT KIT” in “What T o Do In Emergencies” for further information. CAUTION! Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with a compact, full size or limited-use temporary spare ...

  • Fiat 500 (2014) - page 274

    Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare tir e. Do not install more than one compact spare tire and wheel on the vehicle at any given time. W ARNING! Compact spares are for temporary emergency use only . With these spares, do not d ...

  • Fiat 500 (2014) - page 275

    tire affects vehicle handling. Since it is not the same as your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the first opportunity . W ARNING! Limited-use spares are for emergency use only . In- stallation of this limited-use spare tire affects vehicle handling. W ith this tire, do not dri ...

  • Fiat 500 (2014) - page 276

    T read Wear Indicators T read wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators ar e molded into the bottom of the tr ead grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire shou ...

  • Fiat 500 (2014) - page 277

    W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have a collision resulting in serious injury or death. Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Prote ...

  • Fiat 500 (2014) - page 278

    W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredict- able handling and stress to steeri ...

  • Fiat 500 (2014) - page 279

    TIRE CHAINS (TRACTION DEVICES) Use of traction devices r equire sufficient tir e-to-body clearance. Follow these recommendations to guard against damage: • T raction device must be of proper size for the tire, as recommended by the traction device manufacturer . • Install on Front T ires. • Due to limited clearance, a 185/55R15 tir e with a S ...

  • Fiat 500 (2014) - page 280

    CAUTION! (Continued) • Observe the traction device manufacturer ’ s instruc- tions on the method of installation, operating speed, and conditions for use. Always use the suggested operating speed of the device manufac- turer ’ s if it is less than 30 mph (48 km/h). • Do not use traction devices on a compact spare tire. TIRE ROT A TION RECOM ...

  • Fiat 500 (2014) - page 281

    TIRE PRESSURE MONITORING SYSTEM (TPMS) The T ire Pressur e Monitor System (TPMS) will warn the driver of a low tir e pr essure based on the vehicle recom- mended cold tire pressure. The tire pr essure will vary with temperature by about 1 psi (7 kPa) for every 12° F (6.5° C). This means that when the outside temperature decreases, the tire pressu ...

  • Fiat 500 (2014) - page 282

    For example, your vehicle may have a recommended cold (parked for more than three hours) tire pressur e of 30 psi (207 kPa). If the ambient temperature is 68° F (20° C) and the measured tire pressure is 27 psi (186 kPa), a tempera- ture drop to 20° F (-7° C) will decrease the tire pr essure to approximately 23 psi (159 kPa). This tire pressure ...

  • Fiat 500 (2014) - page 283

    CAUTION! (Continued) • After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the T ire Pressure Moni- toring Sensor . NOTE: • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire f ...

  • Fiat 500 (2014) - page 284

    Base System This is the TPMS warning indicator located in the instrument cluster . The TPMS uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressur e lev- els. Sensors, mounted to each wheel as part of the valve stem, transmit tire pr essure r eadings to the Receiver Module. NOTE: It is particularly important for ...

  • Fiat 500 (2014) - page 285

    Check TPMS W arnings The T ire Pressur e Monitoring T elltale Light will flash on and off for 75 seconds and remain on solid when a system fault is detected, an audible chime will be activated and the “T ire Pressur e Monitoring Unavailable” text message will display . If the ignition key is cycled, this sequence will r epeat providing the syst ...

  • Fiat 500 (2014) - page 286

    4. This occurs for each subsequent ignition key cycle, a chime will sound and the T ire Pressur e Monitoring T elltale Light will flash on and off for 75 seconds and then remain on solid. 5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare tire, the TPMS will update automatically and th ...

  • Fiat 500 (2014) - page 287

    FUEL REQUIREMENTS — 1.4L Engine This engine is designed to meet all emis- sion r egulations and provide satisfactory fuel economy and performance when us- ing high-quality unleaded ⬙ regular ⬙ gaso- line with a minimum octane rating of 87. For optimum performance and fuel economy the use of 91 octane or higher is recommended. Light spark knoc ...

  • Fiat 500 (2014) - page 288

    Reformulated Gasoline Many areas of the country requir e the use of cleaner burning gasoline r eferred to as “Reformulated Gasoline”. Reformulated gasolines contain oxygenates and are spe- cifically blended to reduce vehicle emissions and im- prove air quality . The manufactur er supports the use of reformulated gaso- lines. Properly blended re ...

  • Fiat 500 (2014) - page 289

    If a Non-FFV vehicle is inadvertently fueled with E-85 fuel, the engine will have some or all of these symptoms: • Operate in a lean mode. • OBD II “Malfunction Indicator Light” on. • Poor engine performance. • Poor cold start and cold drivability . • Increased risk for fuel system component corrosion. T o fix a Non-FFV vehicle inadve ...

  • Fiat 500 (2014) - page 290

    Materials Added T o Fuel All gasoline sold in the United States is requir ed to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefor e, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these ...

  • Fiat 500 (2014) - page 291

    Carbon Monoxide Warnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicl ...

  • Fiat 500 (2014) - page 292

    CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel (Continued) CAUTION! (Continued) cap (gas cap). A poorly fitting cap could let impu- rities into the fuel system. Also, a poorly fitting aftermarket cap can cause the “Malfunction Indi- cator Light (MIL)” to illuminate, due to fuel vapors ...

  • Fiat 500 (2014) - page 293

    W ARNING! (Continued) • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground while filling. NOTE: • When the fuel nozzle “clicks” or shuts off, the fuel tank is full. • T ighten the gas cap about 1/4 turn until you hear one click. Thi ...

  • Fiat 500 (2014) - page 294

    RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) T owing This V ehicle Behind Another V ehicle T owing Condition Wheels OFF the Ground Manual T ransmission Automatic T ransmission Flat T ow NONE T ransmission in NEUTRAL NOT ALLOWED Dolly T ow Front OK OK Rear NOT ALLOWED NOT ALLOWED On T railer ALL OK OK NOTE: V ehicles equipped with manual transmissi ...

  • Fiat 500 (2014) - page 295

    NOTE: This vehicle may be towed on a flatbed or vehicle trailer provided all four wheels ar e OFF the ground. CAUTION! T owing this vehicle in violation of the above require- ments can cause severe transmission damage. Dam- age from improper towing is not covered under the New V ehicle Limited W arranty . 5 ST ARTING AND OPERA TING 293 ...

  • Fiat 500 (2014) - page 296

    ...

  • Fiat 500 (2014) - page 297

    WHA T TO DO IN EMERGENCIES CONTENTS 䡵 HAZARD W ARNING FLASHERS .......... .297 䡵 IF YOUR ENGINE OVERHEA TS ........... .297 䡵 TIREFIT KIT — IF EQUIPPED ............ .298 ▫ TIREFIT Storage ..................... .299 ▫ TIREFIT Kit Components And Operation .... .299 ▫ TIREFIT Usage Precautions .............. .300 ▫ Sealing A T ire W it ...

  • Fiat 500 (2014) - page 298

    䡵 FREEING A STUCK VEHICLE ............ .326 䡵 SHIFT LEVER OVERRIDE ............... .327 䡵 TOWING A DISABLED VEHICLE .......... .329 ▫ Automatic T ransmission ................ .330 ▫ Manual T ransmission .................. .331 䡵 ENHANCED ACCIDENT RESPONSE SYSTEM ............................ .331 296 WHA T TO DO IN EMERGENCIES ...

  • Fiat 500 (2014) - page 299

    HAZARD W ARNING FLASHERS The Hazard W arning flasher switch is located on the instrument panel below the radio. Press the switch to turn on the Hazard W arning flashers. When the switch is activated, all direc- tional turn signals will flash on and of f to warn oncoming traffic of an emergency . Press the switch a second time to turn off the Hazard ...

  • Fiat 500 (2014) - page 300

    CAUTION! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. T urn of f the air conditioning and wait until the pointer drops back into the normal range. If the pointer remains on the H (re ...

  • Fiat 500 (2014) - page 301

    TIREFIT Storage The TIREFIT kit is located under the front driver’s seat. TIREFIT Kit Components And Operation TIREFIT Kit Location TIREFIT Components 1 — Sealant Bottle 5 — Mode Select Knob 2 — Deflation Button 6 — Sealant Hose (Clear) 3 — Pressure Gauge 7 — Air Pump Hose (Black) 4 — Power Button 8 — Power Plug (located on bottom ...

  • Fiat 500 (2014) - page 302

    Using The Mode Select Knob And Hoses Y our TIREFIT kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only . Use the Black Air Pump Hose (7) when selecting this mode. Selecting Sealant Mode Push in the Mode Select Knob ( ...

  • Fiat 500 (2014) - page 303

    • The Sealant Bottle (1) and Sealant Hose (6) are a one tire application use and need to be replaced after each use. Always replace these components immediately at your original equipment vehicle studio. • When the TIREFIT sealant is in a liquid form, clean water , and a damp cloth will r emove the material from the vehicle or tire and wheel co ...

  • Fiat 500 (2014) - page 304

    W ARNING! • Do not attempt to seal a tire on the side of the vehicle closest to traffic. Pull far enough off the road to avoid the danger of being hit when using the TIREFIT kit. • Do not use TIREFIT or drive the vehicle under the following circumstances: – If the puncture in the tire tread is approximately 1/4” (6 mm) or larger . – If th ...

  • Fiat 500 (2014) - page 305

    W ARNING! (Continued) • TIREFIT Sealant solution contains latex. In case of an allergic reaction or rash, consult a physician immediately . Keep TIREFIT out of reach of children. If swallowed, rinse mouth immediately with plenty of water and drink plenty of water . Do not induce vomiting! Consult a physician immediately . Sealing A Tire With TIRE ...

  • Fiat 500 (2014) - page 306

    5. Uncoil the Power Plug (8) and insert the plug into the vehicle’s 12 V olt power outlet. NOTE: Do not remove foreign objects (e.g., scr ews or nails) from the tire. (C) Injecting TIREFIT Sealant Into The Deflated T ire: • Always start the engine before turning ON the TIRE- FIT kit. NOTE: Manual transmission vehicles must have the parking brak ...

  • Fiat 500 (2014) - page 307

    NOTE: If the Mode Select Knob (5) is on Air Mode and the pump is operating, air will dispense from the Air Pump Hose (7) only , not the Sealant Hose (6). If the sealant (white fluid) does flow through the Sealant Hose (6): 1. Continue to operate the pump until sealant is no longer flowing through hose (typically takes 30 - 70 seconds). As the seala ...

  • Fiat 500 (2014) - page 308

    3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place the TIREFIT kit in the vehicle storage location. Quickly pr oceed to (D) “Drive V e- hicle.” CAUTION! • The metal end fitting from Power Plug (8) may get hot after use, so it should be handled carefully . • ...

  • Fiat 500 (2014) - page 309

    (E) After Driving: Pull over to a safe location. Refer to “Whenever Y ou Stop to Use TIREFIT” before continuing. 1. Push in the Mode Select Knob (5) and turn to the Air Mode position. 2. Uncoil the power plug and insert the plug into the vehicle’s 12 V olt power outlet. 3. Uncoil the Air Pump Hose (7) (black in color) and screw the fitting at ...

  • Fiat 500 (2014) - page 310

    5. Replace the Sealant Bottle (1) and Sealant Hose (6) assembly at your authorized studio as soon as pos- sible. Refer to (F) “Sealant Bottle and Hose Replace- ment”. NOTE: When having the tire serviced, advise the autho- rized studio or service center that the tire has been sealed using the TIREFIT service kit. (F) Sealant Bottle And Hose Repl ...

  • Fiat 500 (2014) - page 311

    T orque Specifications Lug Nut/Bolt T orque **Lug Nut/ Bolt Size Lug Nut/ Bolt Socket Size 66 Ft-Lbs (90 N·m) Steel Wheels Only 75 Ft-Lbs (100 N·m) Aluminum Wheels Only M12 x 1.25 17 mm **Use only Chrysler recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tir ...

  • Fiat 500 (2014) - page 312

    T ighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. W ARNING! T o avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been ...

  • Fiat 500 (2014) - page 313

    W ARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • Never start or run the eng ...

  • Fiat 500 (2014) - page 314

    Spare Tire Removal The spare tire is stowed to the underbody below the cargo area. 1. Remove the plug located in the rear cargo area. 2. Fit the wrench tool over the drive nut. Use the wrench to rotate the nut counterclockwise until the spare is on the ground with enough slack in the cable to allow you to pull the tire out from under the vehicle. W ...

  • Fiat 500 (2014) - page 315

    CAUTION! The winch mechanism is designed for use with the jack wrench tool only . Use of an air wrench or other power tools is not recommended and they can dam- age the winch. 3. Pull the spare tire out from under the vehicle. Spare T ire 6 WHA T TO DO IN EMERGENCIES 313 ...

  • Fiat 500 (2014) - page 316

    4. T ilt the retainer at the end of the cable and pull it through the center of the wheel. Preparations For Jacking 1. Park the vehicle on a firm level surface, avoiding ice or slippery areas. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit w ...

  • Fiat 500 (2014) - page 317

    6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked. Jacking Instructions W ARNING! Carefully follow these tire changing warnings to help prevent persona ...

  • Fiat 500 (2014) - page 318

    W ARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • I ...

  • Fiat 500 (2014) - page 319

    2. Loosen, but do not remove, the wheel bolts by turning them to the left one turn while the wheel is still on the ground. NOTE: There are fr ont and rear jacking locations on each side of the body (as indicated by the triangular lift point symbol on the sill molding). Do not raise the vehicle until you are sure the jack is securely engaged. Front ...

  • Fiat 500 (2014) - page 320

    3. T urn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed. W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip ...

  • Fiat 500 (2014) - page 321

    NOTE: Before using the swivel wrench to remove the wheel bolts be sure to remove the center cap of the wheel by inserting the angled tab end of the swivel wrench into the notched part of the center cap. 5. Remove the wheel bolts and pull the wheel of f the hub. For vehicles equipped with aluminum wheels, the center caps must be removed to remove th ...

  • Fiat 500 (2014) - page 322

    W ARNING! T o avoid possible personal injury , handle the wheel covers with care to avoid contact with any sharp edges. NOTE: The wheel cover is held on the wheel by the wheel bolts. When reinstalling the original wheel, prop- erly align the wheel cover to the valve stem, place the wheel cover onto the wheel, then install the wheel bolts. 6. Instal ...

  • Fiat 500 (2014) - page 323

    10. Place the deflated (flat) tire in the cargo area. Have the tire repair ed or replaced as soon as possible. W ARNING! A loose tire thrown forward in a collision or hard stop could injure the occupants in the vehicle. Have the deflated (flat) tire repaired or replaced immedi- ately . 1 1. Check the spare tire pr essure as soon as possible. Correc ...

  • Fiat 500 (2014) - page 324

    W ARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury . CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 V olts or damage to the battery , starter motor , alternator or electrical system may occur . Preparations For ...

  • Fiat 500 (2014) - page 325

    W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. Y ou could be seriously injured. • Batteries co ...

  • Fiat 500 (2014) - page 326

    Jump-Starting Procedure W ARNING! Failure to follow this jump-starting procedure could result in personal injury or property damage due to battery explosion. CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. Connecting The Jumper Cables 1. Connect the positive ...

  • Fiat 500 (2014) - page 327

    5. Start the engine in the vehicle that has the booster battery , let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery . 6. Once the engine is started, remove the jumper cables in the reverse sequence: Disconnecting The Jumper Cables 1. Disconnect the negative (-) jumper cable from the engine groun ...

  • Fiat 500 (2014) - page 328

    FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand or snow , it can often be moved using a rocking motion. T urn the steering wheel right and left to clear the area around the front wheels. Then shift back and forth between DRIVE and REVERSE (with automatic transmission) or 2nd gear and REVERSE (with manual transmission), while gent ...

  • Fiat 500 (2014) - page 329

    CAUTION! (Continued) • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h) while in gear (no trans- mission shifting occurring). W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds m ...

  • Fiat 500 (2014) - page 330

    4. Press and maintain firm pressur e on the brake pedal. 5. Insert a small scr ewdriver or similar tool into the access hole, and push and hold the override release lever in. 6. Move the shift lever to the NEUTRAL position. 7. The vehicle may then be started in NEUTRAL. 8. Reinstall the shift lever override access cover . Shift Lever Override Acces ...

  • Fiat 500 (2014) - page 331

    TOWING A DISABLED VEHICLE This section describes procedur es for towing a disabled vehicle using a commercial wrecker service. T owing Condition Wheels OFF The Ground AUTOMA TIC TRANSMISSION MANUAL TRANSMISSION Flat T ow NONE NOT ALLOWED If transmission is operable: • T ransmission in NEUTRAL • 65 mph (104 km/h) max speed Wheel Lift Rear NOT AL ...

  • Fiat 500 (2014) - page 332

    If you must use the accessories (wipers, defr osters, etc.) while being towed, the ignition must be in the ON/RUN position. CAUTION! • DO NOT use sling-type equipment when towing. V ehicle damage may occur . • When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result fr ...

  • Fiat 500 (2014) - page 333

    Manual T ransmission • V ehicle can be flat towed (all four wheels on the ground) with the transmission in NEUTRAL. • V ehicle can be towed with the front wheels elevated. • V ehicle can be towed on a flatbed truck (all wheels off the ground). CAUTION! T owing this vehicle in violation of the above require- ments can cause severe engine and/o ...

  • Fiat 500 (2014) - page 334

    Carefully check the vehicle for fuel leaks in the engine compartment and on the ground near the engine com- partment and fuel tank before resetting the system and starting the engine. System Reset Procedure After an impact causing airbag deployment, the left and right turn signal lights, located in the instrument panel cluster , will both be blinki ...

  • Fiat 500 (2014) - page 335

    5. T urn Right T urn Signal Switch ON. Right T urn Light is ON SOLID. Left T urn Light BLINKS. 6. T urn Left T urn Signal Switch ON. Left T urn Light is ON SOLID. Right T urn Light is ON SOLID. 7. T urn Left T urn Signal Switch OFF . (T urn Signal Switch Must be placed in Neutral State). Left T urn Light is OFF . Right T urn Light is OFF . 8. T urn ...

  • Fiat 500 (2014) - page 336

    ...

  • Fiat 500 (2014) - page 337

    MAINT AINING YOUR VEHICLE CONTENTS 䡵 ENGINE COMP AR TMENT — 1.4L ......... .337 䡵 ENGINE COMP AR TMENT — 1.4L TURBO . . . .338 䡵 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .339 䡵 EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS ......................... .340 䡵 REPLACEMENT P AR TS ................. .341 䡵 STUDIO SER VICE ................... ...

  • Fiat 500 (2014) - page 338

    ▫ Automatic T ransmission — Aisin F21-250 HD T ransmission — If Equipped ............ .367 ▫ Appearance Care And Protection From Corrosion .......................... .369 ▫ Convertible T op Care – If Equipped ....... .375 䡵 FUSES ............................. .378 ▫ Interior Fuses ....................... .378 ▫ Underhood Fuses ... ...

  • Fiat 500 (2014) - page 339

    ENGINE COMP ARTMENT — 1.4L 1 — Engine Coolant Reservoir 5 — Battery 2 — Engine Oil Dipstick 6 — Air Cleaner Filter 3 — Brake Fluid Reservoir 7 — Engine Oil Fill 4 — Front Distribution Unit (Fuses) 8 — W asher Fluid Reservoir 7 MAINT AINING YOUR VEHICLE 337 ...

  • Fiat 500 (2014) - page 340

    ENGINE COMP ARTMENT — 1.4L TURBO 1 — Engine Coolant Reservoir 5 — Battery 2 — Engine Oil Dipstick 6 — Engine Oil Fill 3 — Brake Fluid Reservoir 7 — W asher Fluid Reservoir 4 — Front Distribution Unit (Fuses) 338 MAINT AINING YOUR VEHICLE ...

  • Fiat 500 (2014) - page 341

    ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission contr ol systems. When these systems are operating properly , your vehicle will pr ovide excellent performance and fuel economy , as we ...

  • Fiat 500 (2014) - page 342

    EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration. For states that require an Inspection and Mainte- nance (I/M), this check verifies the “Malfunction Indicator Light (MIL)” is func ...

  • Fiat 500 (2014) - page 343

    3. Approximately 15 seconds later , one of two things will happen: • The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station. • The MIL will not flash at all an ...

  • Fiat 500 (2014) - page 344

    STUDIO SERVICE Y our authorized studio has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle. Refer to these Service Manuals before attempting any procedure yourself. NOTE: Intentional tampe ...

  • Fiat 500 (2014) - page 345

    CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance inter- vals. Do not use chemical flushes in these compo- nents as the chemicals can damage your engine, transmission, or air conditioning. Such damage is not covered by the New V ...

  • Fiat 500 (2014) - page 346

    CAUTION! Do not overfill the engine with oil. Overfilling the engine with oil will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This loss of oil pressure and increased oil temperature could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take ...

  • Fiat 500 (2014) - page 347

    American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils. CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by th ...

  • Fiat 500 (2014) - page 348

    Engine Oil V iscosity — 1.4L T urbo Engine (SAE Grade) SAE 5W -40 full synthetic engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy . Lubricants which do not have both the engine oil certi- fication mark and the correct SAE viscosity grade num- ber should not be use ...

  • Fiat 500 (2014) - page 349

    Engine Oil Filter Selection This manufacturer’s engines have a full-flow type dispos- able oil filter . Use a filter of this type for replacement. The quality of replacement filters varies considerably . Only high quality filters should be used to assur e most efficient service. MOP AR® engine oil filters are high quality oil filters and are rec ...

  • Fiat 500 (2014) - page 350

    W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . Refer to “Jump-Starting Procedures” in “W ...

  • Fiat 500 (2014) - page 351

    Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized studio at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. W ARNING! • Use only refrigerants and co ...

  • Fiat 500 (2014) - page 352

    Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydrofluoro- carbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving pr oduct. How- ever , the manufacturer r ecommends that air conditioning service be performed by authorized studio or other service facilities using r ecovery and r ecyc ...

  • Fiat 500 (2014) - page 353

    2. Pull the console closeout cover rearwar d to disengage the front retaining tab and remove the cover . 3. Remove the two 5.5mm screws (1 and 2) that secure the particulate air filter cover to the HV AC housing. Console Closeout panel Air Filter Cover Screw Locations 7 MAINT AINING YOUR VEHICLE 351 ...

  • Fiat 500 (2014) - page 354

    4. Remove the A/C air filter by pulling it straight out of the housing. T ake note of the air filter position indicators. 5. Install the A/C air filter with the air filter position indicators pointing in the same direction as removal. CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter . Failure ...

  • Fiat 500 (2014) - page 355

    Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubri- cated periodically with a lithium based grease, such as MOP AR® Spray White Lube to assur e quiet, easy opera- tion and to protect against rust and wear . Pr ...

  • Fiat 500 (2014) - page 356

    NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor perfor- mance of blades may be present with chattering, marks, water lines or wet spots. If any of these conditions are present, clean the wiper blades or replace as necessary . Rear Wiper Blade Removal/Installation 1. Lift the pivot cap on the re ...

  • Fiat 500 (2014) - page 357

    3. Grab the bottom of the wiper blade and r otate it forward to unsnap the blade pivot pin from the wiper blade holder . 4. Install the wiper blade pivot pin into the wiper blade holder at the end of the wiper arm, and firmly press the wiper blade until it snaps into place. 5. Lower the wiper blade and snap the pivot cap into place. Adding Washer F ...

  • Fiat 500 (2014) - page 358

    W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system. If you notice a change in the so ...

  • Fiat 500 (2014) - page 359

    CAUTION! • The catalytic converter requires the use of un- leaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device and may seriously reduce engine perfor- mance and cause serious damage to the engine. • Damage to the catalytic converter can result if your vehicle is not kept in proper ope ...

  • Fiat 500 (2014) - page 360

    T o minimize the possibility of catalytic converter dam- age: • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnos ...

  • Fiat 500 (2014) - page 361

    Coolant Checks Check engine coolant (antifreeze) protection every 12 months (befor e the onset of freezing weather , where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed and refilled with fresh engine coolant (anti- freeze). Check the front of the A/C condenser for any accumula ...

  • Fiat 500 (2014) - page 362

    CAUTION! • Mixing of engine coolant (antifreeze) other than specified Organic Additive T echnology (OA T) en- gine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic Additive T echnology (OA T) engine cool- ant is different and should not be mixed with Hybrid Organic Additive T echnology (HOA T) en- g ...

  • Fiat 500 (2014) - page 363

    Adding Coolant Y our vehicle has been built with an impr oved engine coolant (OA T coolant conforming to MS-12106) that allows extended maintenance intervals. This engine cool- ant (antifreeze) can be used up to ten years or 150,000 miles (240,000 km) before replacement. T o pre- vent reducing this extended maintenance period, it is important that ...

  • Fiat 500 (2014) - page 364

    NOTE: • Some vehicles requir e special tools to add coolant properly . Failure to fill these systems properly could lead to severe internal engine damage. If any coolant is needed to be added to the system please contact your local authorized studio. • Mixing engine coolant (antifreeze) types is not recom- mended and can result in cooling syste ...

  • Fiat 500 (2014) - page 365

    Disposal Of Used Engine Coolant Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community . T o prevent ingestion by ani- mals or children, do not store ethylene glycol-based engine coolant in open containers or allo ...

  • Fiat 500 (2014) - page 366

    If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant expansion bottle. • Check the coolant freeze point in the radiator and in the coolant expansion bottle. If engine coolant (antifreeze) needs to be added, the con ...

  • Fiat 500 (2014) - page 367

    W ARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Riding the brakes may also reduce braking capacity in an emergency . Brake Master Cylinder The fluid level in ...

  • Fiat 500 (2014) - page 368

    W ARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its perfor- mance. The proper type of brake fluid for your vehicle is also identifi ...

  • Fiat 500 (2014) - page 369

    Manual T ransmission — If Equipped Lubricant Selection Use only the manufacturers recommended transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the f ...

  • Fiat 500 (2014) - page 370

    CAUTION! Using a transmission fluid other than the manufac- turer ’ s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder . Refer to “Fluids, Lubricants, and Genuine Parts” in this section for fluid specifications. Special Additives The manufacturer strongly recommends against using any spec ...

  • Fiat 500 (2014) - page 371

    CAUTION! If a transmission fluid leak occurs, visit your autho- rized studio immediately . Severe transmission dam- age may occur . Y our authorized studio has the proper tools to adjust the fluid level accurately . Fluid And Filter Changes Under normal operating conditions, the fluid installed at the factory will provide satisfactory lubrication f ...

  • Fiat 500 (2014) - page 372

    What Causes Corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes are: • Road salt, dirt and moisture accumulation. • Stone and gravel impact. • Insects, tree sap and tar . • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollut ...

  • Fiat 500 (2014) - page 373

    Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • It is important that the drain holes in the lower edges of the doors, r ocker panels, and tr unk be kept clear and open. • If you detect any stone chips or scratches in the paint, touch them up immediately . ...

  • Fiat 500 (2014) - page 374

    NOTE: If your vehicle is equipped with Dark V apor Chrome wheels DO NOT USE wheel cleaners, abrasives or polishing compounds. They will permanently damage this finish and such damage is not covered by the New V ehicle Limited W arranty . USE ONL Y MILD SOAP AND W A TER WITH A SOFT CLOTH. Used on a regular basis this is all that is requir ed to main ...

  • Fiat 500 (2014) - page 375

    Interior Care Use MOP AR® T otal Clean to clean fabric upholstery and carpeting. Use MOP AR® T otal Clean to clean vinyl upholstery . MOP AR® T otal Clean is specifically recommended for leather upholstery . Y our leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive a ...

  • Fiat 500 (2014) - page 376

    T o minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. T o remove road dirt, wash with a mild soap solution fol- lowed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. Glass Surfaces All glass surfaces should be cleane ...

  • Fiat 500 (2014) - page 377

    Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe c ...

  • Fiat 500 (2014) - page 378

    CAUTION! (Continued) • Remove any standing water from the top and dry the surface before opening it. Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicles interior . • Use care when washing the vehicle, water pressure directed at the weather strip seals may cause water to leak into ...

  • Fiat 500 (2014) - page 379

    General Cleaning Careful vacuuming of the top before washing is helpful in removing dust and other foreign particles. W ash in partial shade instead of direct sun. W et the entire vehicle before washing the top. The top should be washed with a soft, natural bristle scrub brush, and a mild soap solution such as liquid dishwashing soap. Do not use de ...

  • Fiat 500 (2014) - page 380

    FUSES W ARNING! • When replacing a blown fuse, always use an appro- priate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material. Failure to use proper fuses may result in serious personal injury , fire and/or p ...

  • Fiat 500 (2014) - page 381

    Cav- ity Ve - hicle Fuse Num- ber Mini Fuse Description 1 F12 7.5 Amp Brown Right Low Beam 2 F32 5 Amp Ta n Front and Rear Ceil- ing Lights T runk and Door Courtesy Lights 3 F53 5 Amp Ta n Instrument Panel Node 4 F38 20 Amp Y ellow Central Door Locking 5 F36 10 Amp Red Diagnostic Socket, Car Radio, Climate Control System Fuse Panel 7 MAINT AINING Y ...

  • Fiat 500 (2014) - page 382

    Cav- ity Ve - hicle Fuse Num- ber Mini Fuse Description 6 F43 20 Amp Y ellow Bi-Directional W asher 7 F48 20 Amp Y ellow Passenger Power W indow 8 F13 7.5 Amp Brown Left Low Beam, Headlamp Leveling 9 F50 7.5 Amp Brown Airbag 10 F51 5 Amp Ta n Car Radio Switch, Cli- mate Control System, Stop Light, Clutch Cav- ity Ve - hicle Fuse Num- ber Mini Fuse ...

  • Fiat 500 (2014) - page 383

    Underhood Fuses The Front Distribution Unit is located on the right side of the engine compartment, next to the battery . T o access the fuses, press the release tabs and remove the cover . The ID number of the electrical component correspond- ing to each fuse can be found on the back of the cover . Cavity Maxi Fuse Mini Fuse Description F01 60 Amp ...

  • Fiat 500 (2014) - page 384

    Cavity Maxi Fuse Mini Fuse Description F06 30 Amp Green Radiator Fan - Low Speed F07 40 Amp Orange Radiator Fan - High Speed F08 30 Amp Green Blower Motor F09 10 Amp Red Powertrain F10 10 Amp Red Horn F1 1 15 Amp Blue Powertrain F1 1 10 Amp Red Powertrain (Multi- air – If Equipped) Cavity Maxi Fuse Mini Fuse Description F14 5 Amp Ta n High beam ( ...

  • Fiat 500 (2014) - page 385

    Cavity Maxi Fuse Mini Fuse Description F19 7.5 Amp Brown Air Conditioning F20 15 Amp Blue Heated Seats – If Equipped F21 15 Amp Blue Fuel Pump F22 20 Amp Y ellow Powertrain F23 20 Amp Y ellow Anti-Lock Brake V alves F24 7.5 Amp Brown Stability Control System F30 15 Amp Blue Fog Lamps Cavity Maxi Fuse Mini Fuse Description F82 30 Amp Green Sunroof ...

  • Fiat 500 (2014) - page 386

    VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your battery . • Disconnect the negative cable from the battery . • Anytime you store your vehicle, or keep it out of service (e.g., vacation) for two weeks or more, run the air conditioning system at idle for about five mi ...

  • Fiat 500 (2014) - page 387

    Bulb Number Side Direction Lamps W5W Rear T urn Signal Lamps PY21W Rear Side Marker Lamps W3W Rear T ail and Stop Lamps PY21W/5W Rear Backup Lamps W16W Center High Mounted Stop Lamp W5W License Plate Lamps LED (See Au- thorized studio) NOTE: Numbers refer to commercial bulb types that can be purchased from your authorized studio. If a bulb needs to ...

  • Fiat 500 (2014) - page 388

    Front T urn Signal, Parking And Daytime Running Lamps 1. T urn the steering wheel completely to the left or right. 2. Open the wheel housing access door . 3. Remove the plastic cap from the back of the lamp housing. 4. Rotate bulb/socket counter-clockwise. 5. Remove the bulb and replace as needed. 6. Install the bulb into socket, and rotate bulb/so ...

  • Fiat 500 (2014) - page 389

    Front/Rear Side Marker Lamps 1. Remove portion of the wheel liner to allow hand access to side marker lamp. 2. Rotate the bulb socket counterclockwise, and remove the bulb and socket assembly from the housing. 3. Pull the bulb from the socket and insert the replace- ment bulb. 4. Install the bulb and socket assembly into the housing, and rotate the ...

  • Fiat 500 (2014) - page 390

    3. Remove the four screws (using a T20 driver) and separate the backplate from the lamp housing. 4. Remove the tail, stop, or turn signal bulbs by pushing them slightly and turning counter-clockwise. 5. Remove the backup lamp bulb by pulling straight out. 6. Replace lamps as required and reinstall lamp. Center High Mounted Stop Lamp (CHMSL) 1. Remo ...

  • Fiat 500 (2014) - page 391

    FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 10.5 Gallons 40 Liters Engine Oil with Filter 1.4L/1.4L T urbo Engine 4 Quarts 3.8 Liters Cooling System 1.4L/1.4L T urbo Engine (MOP AR® Antifr eeze/Engine Coolant 10 Y ear/150,000 Mile Formula) — with Manual T ransmission 4.6 Quarts 4.4 Liters 1.4L/1.4L T urbo Engine (MOP AR® Antifr eeze/Engine ...

  • Fiat 500 (2014) - page 392

    FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant - 1.4L/1.4L T urbo Engine W e recommend you use MOP AR® Antifreeze/Coolant 10 Y ear/ 150,000 Mile Formula OA T (Organic Additive T echnology) meeting the requir ements of Chrysler Material Standard MS-12106. Engine Oil - 1.4L Engine W e recommen ...

  • Fiat 500 (2014) - page 393

    Component Fluid, Lubricant, or Genuine Part Spark Plugs - 1.4L T urbo Engine W e recommend you use MOP AR® Spark Plugs (Gap 0.026 in [.65 mm]) Fuel Selection - 1.4L/1.4L T urbo Engine 87 Octane Acceptable — 91 Octane Recommended Chassis Component Fluid, Lubricant, or Genuine Part Manual T ransmission – If Equipped W e recommend you use MOP AR? ...

  • Fiat 500 (2014) - page 394

    ...

  • Fiat 500 (2014) - page 395

    MAINTENANCE SCHEDULES CONTENTS 䡵 MAINTENANCE SCHEDULE ............ .394 ▫ Maintenance Chart ................... .395 8 M A I N T E N A N C E S C H E D U L E S ...

  • Fiat 500 (2014) - page 396

    MAINTENANCE SCHEDULE Y our vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate. This means that ser- vice is required for your vehicl ...

  • Fiat 500 (2014) - page 397

    Required Maintenance Intervals . Refer to the maintenance schedules on the following page for the requir ed maintenance intervals. At Every Oil Change Interval As Indicated By Oil Change Indicator System: • Change oil and filter . • Rotate the tires. Rotate at the first sign of irregu- lar wear , even if it occurs before the oil indicator syste ...

  • Fiat 500 (2014) - page 398

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or Kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,000 224,000 240,000 Additional Inspections Inspec ...

  • Fiat 500 (2014) - page 399

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or Kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,000 224,000 240,000 Clean and lube sun roof track ...

  • Fiat 500 (2014) - page 400

    ** The spark plug change interval is mileage based only , yearly intervals do not apply . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- ...

  • Fiat 500 (2014) - page 401

    IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 SUGGESTIONS FOR OBT AINING SER VICE FOR YOUR VEHICLE .................. .401 ▫ Prepar e For The Appointment ............ .401 ▫ Prepar e A List ....................... .401 ▫ Be Reasonable W ith Requests ............ .401 䡵 IF YOU NEED ASSIST ANCE ............. .401 ▫ FIA T CUSTOMER CENTER ... ...

  • Fiat 500 (2014) - page 402

    䡵 DEP ARTMENT OF TRANSPOR T A TION UNIFORM TIRE QUALITY GRADES ....... .406 ▫ T readwear .......................... .407 ▫ T raction Grades ...................... .407 ▫ T emperature Grades ................... .407 400 IF YOU NEED CONSUMER ASSIST ANCE ...

  • Fiat 500 (2014) - page 403

    SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you are having warranty work done, be sure to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s s ...

  • Fiat 500 (2014) - page 404

    are most concerned that you get pr ompt and high quality service. The manufacturer’s authorized studio have the facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner . This is why you should always talk to an authorized studio service manager first. Most ...

  • Fiat 500 (2014) - page 405

    Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center . Any hearing or speech impaired customer , who has access to a TDD or a conventional teletypewriter (TTY) in the ...

  • Fiat 500 (2014) - page 406

    W e appreciate that you have made a major investment when you purchased the vehicle. An authorized studio has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. Y ou will be pleased with their sincere efforts to r esolve any warranty issues or related concerns. ...

  • Fiat 500 (2014) - page 407

    campaign. However , NHTSA cannot become involved in individual problems between you, your authorized stu- dio, and the manufacturer . T o contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .safer car .gov; or write to: Administrator , NHTSA, 1200 New Jersey ...

  • Fiat 500 (2014) - page 408

    Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations. These practical manuals make it easy for students and technicians to find and fix problems on computer-controlled vehicle systems and features. They show exactly how to find and corr ect problems the first time, using step-by-step ...

  • Fiat 500 (2014) - page 409

    T readwear The T readwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tir e graded 100. The relative performance of tires depends upon the actual ...

  • Fiat 500 (2014) - page 410

    The grade C corresponds to a level of performance, which all passenger car tires must meet under the Federal Motor V ehicle Safety Standard No. 109. Grades B and A repr esent higher levels of performance on the laboratory test wheel, than the minimum requir ed by law . W ARNING! The temperature grade for this tire is established for a tire that is ...

  • Fiat 500 (2014) - page 411

    INDEX 10 ...

  • Fiat 500 (2014) - page 412

    Adding Engine Coolant (Antifreeze) ........... .361 Adding Fuel ............................ .289 Adding W asher Fluid ..................... .355 Additives, Fuel .......................... .288 Airbag .................................. 3 8 Airbag Deployment ........................ 5 2 Airbag Light ............................. 4 6 Airbag Maintenan ...

  • Fiat 500 (2014) - page 413

    Battery ................................ .347 Jump Starting ......................... .321 Keyless T ransmitter Replacement (RKE) ........ 1 7 Belts, Seat ............................... 7 9 Body Mechanism Lubrication ................ .353 B-Pillar Location ......................... .261 Brake Assist System ...................... .247 Brake Fluid . ...

  • Fiat 500 (2014) - page 414

    Cleaning Wheels .............................. .371 W indshield W iper Blades ................. .353 Climate Control ......................... .205 Clutch ................................ .365 Clutch Fluid ............................ .365 Compact Disc (CD) Maintenance ............. .204 Compact Spare T ir e ....................... .271 Connector U ...

  • Fiat 500 (2014) - page 415

    Driving Through Flowing, Rising, or Shallow Standing W ater ............................... .238 Electrical Power Outlets .................... .130 Electric Remote Mirrors ...................... 9 1 Electronic Brake Control System .............. .246 Brake Assist System .................... .247 Electronic Speed Control (Cruise Control) ........ 1 ...

  • Fiat 500 (2014) - page 416

    Exhaust System ........................... 7 8 Exterior Lights ............................ 8 1 Filler Location Fuel ....................... .155 Filters Air Cleaner .......................... .347 Air Conditioning ...................... .350 Engine Fuel .......................... .390 Engine Oil ........................... .346 Engine Oil Disposal ...

  • Fiat 500 (2014) - page 417

    Gasoline, Clean Air ....................... .286 Gasoline (Fuel) .......................... .285 Gasoline, Reformulated .................... .286 Gauges Coolant T emperature .................... .153 Fuel ................................ .155 Odometer ............................ .154 T achometer ........................... .155 Gear Ranges ....... ...

  • Fiat 500 (2014) - page 418

    Interior Lighting .......................... 1 1 2 Introduction .............................. 4 Jacking Instructions ....................... .315 Jack Location ............................ 3 1 1 Jack Operation .......................... .310 Jump Starting ........................... .321 Key-In Reminder .......................... 1 4 Key , Replace ...

  • Fiat 500 (2014) - page 419

    Service Engine Soon (Malfunction Indicator) . . . .149 T ire Pressure Monitoring (TPMS) ........... .147 T raction Control ....................... .253 T urn Signal ............................ 8 1 V oltage ............................. .146 W ait to Start .......................... .144 W arning (Instrument Cluster Description) ..... .144 Loading ...

  • Fiat 500 (2014) - page 420

    Octane Rating, Gasoline (Fuel) ............... .285 Odometer .............................. .154 T r i p ................................ .154 Oil Change Indicator ...................... .160 Oil Change Indicator , Reset ................. .160 Oil, Engine ............................. .343 Capacity ............................ .389 Change Interval ...

  • Fiat 500 (2014) - page 421

    Pretensioners Seat Belts .............................. 3 6 Radial Ply T ires ......................... .268 Radio Operation ......................... .175 Radio Reception ......................... .175 Radio (Sound Systems) .................... .175 Rear Liftgate (Sedan) ....................... 2 5 Rear W indow Features .................... .137 R ...

  • Fiat 500 (2014) - page 422

    Rear Seat .............................. 2 9 Untwisting Procedure ..................... 3 4 Seat Belts (Sedan) .......................... 2 6 Seats ................................. .100 Adjustment .......................... .100 Heated .............................. .104 Sentry Key (Immobilizer) .................... 1 4 Service Assistance ........ ...

  • Fiat 500 (2014) - page 423

    Studio Service ........................... .342 Sun Roof .............................. .128 Supplemental Restraint System - Airbag .......... 3 8 Synthetic Engine Oil ...................... .346 T achometer ............................. .155 T emperature Control, Automatic (A TC) ......... .208 T emperature Gauge, Engine Coolant ........... .153 T ...

  • Fiat 500 (2014) - page 424

    Recreational .......................... .292 T raction ............................... .237 T raction Control ......................... .248 T railer T owing .......................... .291 T ransaxle Automatic ............................. 1 2 Autostick ............................ .235 T ransmission Automatic ........................... .227 Flui ...

  • Fiat 500 (2014) - page 425

    W ind Buffeting ............................ 2 4 W indow Fogging ........................ .214 W indows ................................ 2 3 Power ................................ 2 3 W indshield Defroster ....................... 7 9 W indshield W ashers ....................... 1 1 4 W indshield W iper Blades ................... .353 W indshield W ...

  • Fiat 500 (2014) - page 426

    INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations ar e incorporated into t his vehicle’ s elec tronic sys tem to pro vide immunity to radio frequency signals. Mobile two-wa y radios and telephone equipment must be inst alled properly by trained personnel. The f ollowing must be observed during inst allation. The positiv ...

Manufacturer Fiat Category Car

Documents that we receive from a manufacturer of a Fiat 500 (2014) can be divided into several groups. They are, among others:
- Fiat technical drawings
- 500 (2014) manuals
- Fiat product data sheets
- information booklets
- or energy labels Fiat 500 (2014)
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fiat 500 (2014).

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fiat 500 (2014), service manual, brief instructions and user manuals Fiat 500 (2014). Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fiat 500 (2014).

Similar manuals

A complete manual for the device Fiat 500 (2014), how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fiat 500 (2014) by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fiat 500 (2014).

A complete Fiat manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fiat 500 (2014) - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fiat 500 (2014), FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fiat 500 (2014), that we can find in the current document
3. Tips how to use the basic functions of the device Fiat 500 (2014) - which should help us in our first steps of using Fiat 500 (2014)
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fiat 500 (2014)
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fiat 500 (2014) in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fiat 500 (2014)?

Use the form below

If you did not solve your problem by using a manual Fiat 500 (2014), ask a question using the form below. If a user had a similar problem with Fiat 500 (2014) it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)