English dropdown-ico

Manual Transition Networks SBFTF1014-120

9 pages 0.14 mb
Download

Go to site of 9

Summary
  • Transition Networks SBFTF1014-120 - page 1

    Part Number Copper - five (5) ports 10Base-T/100Base-TX Duplex Fiber-Optic - one (1) port 100Base-FX SBFTF1011-120 RJ-45 100 m (328 ft)* ST, 1300 nm multimode 2 km (1.2 miles)* SBFTF1013-120 RJ-45 100 m (328 ft)* SC, 1300 nm multimode 2 km (1.2 miles)* SBFTF1014-120 RJ-45 100 m (328 ft)* SC, 1310 nm single mode 20 km (12.4 miles)* SBFTF1015-120 (lo ...

  • Transition Networks SBFTF1014-120 - page 2

    2 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 * Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network. (TX) = transmit (RX) = receive ** SBFTF1029- 120 and - 121 are intended to be installed in the same network where one is the local converter an ...

  • Transition Networks SBFTF1014-120 - page 3

    4 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Set the Dip Switches -- Continued NOTE: Dip switch 4 (in the “SW” set) applies to fiber port 1 (F1). 4. Fiber Mode (Fiber Port 1) Up (Full-Duplex) - The cable distances for fiber port 1 (F1) are constrained by the cable requir ...

  • Transition Networks SBFTF1014-120 - page 4

    6 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued • If half-duplex mode is used, refer to the 512-Bit Rule (see page 9). • If full-duplex mode is used, the 512-Bit Rule does not apply. The cable lengths are constrained by the cable requirements (see pages 1 and 2). Connect th ...

  • Transition Networks SBFTF1014-120 - page 5

    8 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Oper ation Status LEDs Use the status LEDs next to the fiber ports to monitor the media converter and the fiber network connections. F(ull) D(uplex) On = Full-duplex connection. Off = Half-duplex connection. L(ink) ACT(ivity) On = Fiber link connection. Fl ...

  • Transition Networks SBFTF1014-120 - page 6

    10 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Oper ation -- Continued Product Features -- Continued Rate Conversion The SBFTF10xx-12x media converter allows connection of 10Mb/s terminal devices on a 10Base-T legacy Ethernet copper network to 100Mb/s terminal devices on a 100Base-TX fast Ethernet cop ...

  • Transition Networks SBFTF1014-120 - page 7

    12 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications -- Continued Copper Cable Category 3: (Minimum requirement for 10 Mb/s operation) Gauge 24 to 22 AWG Attenuation 11.5 dB/100m @ 5-10 MHz Maximum Cable Distance 100 meters Category 5: (Minimum requirement for 100 Mb/s operation) Gauge ...

  • Transition Networks SBFTF1014-120 - page 8

    14 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T r oubleshooting If the media converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action: 1. Is the power LED on the media converter illuminated? NO • Is the power adapter ...

  • Transition Networks SBFTF1014-120 - page 9

    Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2001-2005 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - without written permission from Transition Networks. Pr ...

Manufacturer Transition Networks Category Switch

Documents that we receive from a manufacturer of a Transition Networks SBFTF1014-120 can be divided into several groups. They are, among others:
- Transition Networks technical drawings
- SBFTF1014-120 manuals
- Transition Networks product data sheets
- information booklets
- or energy labels Transition Networks SBFTF1014-120
All of them are important, but the most important information from the point of view of use of the device are in the user manual Transition Networks SBFTF1014-120.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Transition Networks SBFTF1014-120, service manual, brief instructions and user manuals Transition Networks SBFTF1014-120. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Transition Networks SBFTF1014-120.

Similar manuals

A complete manual for the device Transition Networks SBFTF1014-120, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Transition Networks SBFTF1014-120 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Transition Networks SBFTF1014-120.

A complete Transition Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Transition Networks SBFTF1014-120 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Transition Networks SBFTF1014-120, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Transition Networks SBFTF1014-120, that we can find in the current document
3. Tips how to use the basic functions of the device Transition Networks SBFTF1014-120 - which should help us in our first steps of using Transition Networks SBFTF1014-120
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Transition Networks SBFTF1014-120
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Transition Networks SBFTF1014-120 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Transition Networks SBFTF1014-120?

Use the form below

If you did not solve your problem by using a manual Transition Networks SBFTF1014-120, ask a question using the form below. If a user had a similar problem with Transition Networks SBFTF1014-120 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)