English dropdown-ico

Manual Linear DVS-1200

44 pages 2.21 mb
Download

Go to site of 44

Summary
  • Linear DVS-1200 - page 1

    Black 0001 Black 0001 SUPER VISED WIRELESS SECURIT Y CONSOLE Installation & P rogramming Instructions (760) 438-7000 • FAX (760) 438-7043 USA & Canada (800) 421-1587 & (800) 392-0123 Toll Free FA X (800) 468-1340 1 ...

  • Linear DVS-1200 - page 2

    Black 0002 Black 0002 INTRODUC TION CONGRATULATIONS for selecting Linear’s DVS-1200 Secur ity System. The DVS-1200 Console incorporates many advanced and sophisticated features. The system can be expanded and customized to fit the installation’s specific needs. The DVS-1200 Console and its accessories are designed and manufactured by the oldest ...

  • Linear DVS-1200 - page 3

    Black 0003 Black 0003 T ABLE OF CONTENT S 1. THE DVS-1200 SEC URITY SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CONSOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 DOOR/WIN DOW SENSOR S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WIRELESS KEYPAD . . . . . . . . . . . . . . . . . . ...

  • Linear DVS-1200 - page 4

    Black 0004 Black 0004 1 . THE DVS-1 200 SECURIT Y S Y S TEM CONSOLE The DVS-1200 Console is the heart of the system. It monitors all of the system’s wireless sensors and controls the alarm sirens. The Console cons tantly monitors the condition of the system’s sensors, displaying which protected doors and windows are open or closed. If an alarm ...

  • Linear DVS-1200 - page 5

    Black 0005 Black 0005 DOOR/WINDOW SENSORS The DXS-31 sensors monitor doors and windows. They se nd radio signals to the Console. One type of signal is sent when the door or window is opened, and a different type of signal is sent when the do or or window is closed . If the Console is armed, a sensor can trigger the Co nsole’s burglary sir en when ...

  • Linear DVS-1200 - page 6

    Black 0006 Black 0006 2. SECURIT Y S Y S TEM FL OOR PL AN EXAMPLE SYST EM ◆ The example shows a typical DVS-1200 system. ◆ Any or all of the accessories shown can b e used. ◆ A total of 12 sensors (includ ing keypads) can be used with each Console. DESIGN THE INSTALLATION Create a floor plan of the installation. Consider the security n eeds o ...

  • Linear DVS-1200 - page 7

    Black 0007 Black 0007 3. T YPICAL S Y S TEM SENSORS DOOR/WINDOW SENSOR ◆ Sensor mounts on door o r window with adjacent magnet. ◆ Opening door or windo w moves magnet away, triggering sensor. ◆ Pressing the case causes sensor to send a test signal. ◆ Jumper inside for INSTANT or DELAYED alarm setting. ◆ Press the case for testing, the red ...

  • Linear DVS-1200 - page 8

    Black 0008 Black 0008 4. CONSOLE FE A TURES 1 24-HOUR BUTTONS ★ Pressing the [ FIRE ] button f or two seconds sound s the fire sire n and sends a “fire” m essage to a centra l monitoring st ation through t he digital communicator (if the system is monitored ). ★ Pressing the [ EMERGENCY ] button for two secon ds sounds the emergency siren a ...

  • Linear DVS-1200 - page 9

    Black 0009 Black 0009 10 AUXILIARY FUSE ★ Type 2AG, 1-amp f use. ★ Protec ts the external relay outpu t when used with we t contacts (12 VD C switche d ou t). ★ Fuse will blow when loa d exceeds 1 a mp. ✍ WARNING: For continued protection against the risk of fire, replace only with the s ame type and rating of fuse. 11 MAIN TERMINAL BLOCK ? ...

  • Linear DVS-1200 - page 10

    Black 0010 Black 0010 5. CONSOLE INS T ALL A TION CONSOLE LOCATIO N ✍ NOTE: Sensor signals m ust be able to re ach the Console. ✔ Try to centrally locate the Console. ✔ Keep Console away fro m large metal appliances. ✔ Maximum recommended sensor range is 400 feet (system tested at 1000 feet). ✍ NOTE: If you don’t use the Wireless Keypad ...

  • Linear DVS-1200 - page 11

    Black 0011 Black 0011 EXTERNAL CONSOLE SPEAKER CO NNECTION (OPTIONAL) ◆ An external console speaker sound s system tones and alerts occupants with a loud siren during alar m. ◆ With the VB-2 module installed, the Cen tral Station can talk to the o ccupants through the external console speaker. ◆ Use an 8-ohm, 10 watt minimum rated speaker. Do ...

  • Linear DVS-1200 - page 12

    Black 0012 Black 0012 TELEPHONE LINE CO NNECTION (OPTIONAL) ◆ Connect the Console to the telephone line if the system is monitored, requires 2-way audio, or requires telephone remo te command. ◆ Telephone ring & tip terminals are for connection to th e incoming telephon e line. ◆ Seized telephone ring & tip are for connection to local ...

  • Linear DVS-1200 - page 13

    Black 0013 Black 0013 CONSOLE POWER CONNECTION ◆ The Console is powered by a low voltage plug-in transformer. ◆ Use up to 25 feet of 20 AWG or larger two-conductor wire to con nect the transformer to the Console. Route the power wires from the plug-in transformer to the Console. Connect the wires to the tran sformer terminals (do not plug th e ...

  • Linear DVS-1200 - page 14

    Black 0014 Black 0014 6. BASIC CONSOLE PROGRAMMING ◆ In a new installation, when power is first applied, the Console’s master user code is “1234”. CHANGE TH E MASTER USER CODE ✍ NO TE : Local programming must be entered on the Console’s keypad, not on a wirel ess remote keypad. Press [ ∗ ] (clears keypad if any other keys have been pr ...

  • Linear DVS-1200 - page 15

    Black 0015 Black 0015 PROGRAMMING DIFFERENT SENSOR TYPES ◆ Follow the instructions on the previous page to select a sensor number to prog ram the sensor into. ✍ NOTE: A sensor can be programmed into more than one location. Be sure to choose an unused sensor numb er. If a senso r gets entered into mo re than one location, delete the duplicat es ...

  • Linear DVS-1200 - page 16

    Black 0016 Black 0016 7 . BASIC SENSOR INS T ALL A TION ◆ Each accessory sensor is packaged with its own set of installation instructions specific to the model of sensor. ◆ Refer to the sensor’s instructions for details on installing, operating, and testin g of the sensor. ◆ Following are basic instructions for installing two popular DV S-1 ...

  • Linear DVS-1200 - page 17

    Black 0017 Black 0017 DXS-31 DOOR/WINDOW SENSORS ◆ The DXS-31 sensors can be used to mo nitor doors, windows, cabinets, crawl space do ors, gates, freezer doors, and many oth er moving objects that co uld be used for intru sion or need to be monitored. ◆ A built-in magnetic switch triggers the sensor when its magnet (moun ted on the moving part ...

  • Linear DVS-1200 - page 18

    Black 0018 Black 0018 8. CUS T OMIZING THE CONSOLE ◆ The Console can be customized for the specific installation. ◆ A label sheet with sensor location n ames is provided with the Conso le. ◆ Labeling the sensors allows quick and easy identification of wh ere any alarms have occurred, where a sensor with a low battery is, where a sensor with r ...

  • Linear DVS-1200 - page 19

    Black 0019 Black 0019 9. CONSOLE OPERA TING MODES OFF MODE ◆ Use this mode to disarm the burglary portion of the system. ◆ Switching to Off Mode sto p s any alarms in progress. ◆ The 24-hour functions are still active in Off Mode and can be triggered b y pressing the [ FIRE ] or [ EMERGENCY ] button. Switch to Off Mode by en tering the user c ...

  • Linear DVS-1200 - page 20

    Black 0020 Black 0020 HOME MODE ◆ Use this mode when sleeping or when an yone is staying inside. ◆ Home Mode causes an instant alarm wh en any perimeter sensor is triggered. ◆ Home Mode causes a delayed alarm when any exit/entry sensor is triggered (except in Home Instant Mode when they are instan t). ◆ Alarm siren stops automatically after ...

  • Linear DVS-1200 - page 21

    Black 0021 Black 0021 AWAY MODE ◆ Use this mode when no one will be staying home. ◆ Each burglary sensor can trigger the siren once per arming period. ◆ Away Mode causes an instan t alarm when any perimeter sensor is tri ggered. ◆ Away Mode causes a delayed alarm when any exit/entry sensor is triggered. ◆ Away Mode causes an instan t alar ...

  • Linear DVS-1200 - page 22

    Black 0022 Black 0022 TEST MODE ◆ Even though this is a self-monitor ing supervised system, the National Burglar and Fire Alarm Association recommends that all security systems should be tested manually on a regular basis. ◆ The Console must be in Off Mode before go ing to Test Mode. Switch the Console into Test Mode by entering a user code and ...

  • Linear DVS-1200 - page 23

    Black 0023 Black 0023 1 0. S Y S TEM TR OUBLE INDICA TIONS ◆ The DVS-1200 Console is a s elf-monitoring supervised wirele ss system. ◆ If the Console detect s a problem with any of the supervised system sensors or backup b attery, it will display the appropriate trouble indication and, if monitored, report the trouble to the Central Station thr ...

  • Linear DVS-1200 - page 24

    Black 0024 Black 0024 1 1 . CUS T OMIZING THE S Y S TEM ◆ Adding additional sen sors will increase the protection provid ed by the system. ◆ All ground-level perimeter openings an d accessible upper-story openings need protection. ◆ Motion detectors can protect interior areas and areas where valuables are kept. ADDING SENSORS TO THE SYSTEM Al ...

  • Linear DVS-1200 - page 25

    Black 0025 Black 0025 MAKING A SENSOR A 24-HOU R DOOR CHIME ◆ Sensors can be programmed to cause th e Console to chime an y time they’re activated. ◆ Chime-on ly sensor s will not be able to trigger the alarm in any Console mode. ◆ The sensor must have already been learn ed by the Console (see “Adding sensors to the System” for details) ...

  • Linear DVS-1200 - page 26

    Black 0026 Black 0026 MAKING A SENSOR ACTIVATE A DIFFER ENT ZONE ◆ Any sensor can be reprogrammed to activate any of the Console’s zon es. ◆ The sensor must have already been learned by the Console (see “Adding sen sors to the System” for d etails). Start with the Console in Test Mode. Enter the master user code then press the [ TES T ] b ...

  • Linear DVS-1200 - page 27

    Black 0027 Black 0027 1 2. ADV ANCED PROGRAMMING ◆ To perform any of the advanced prog ramming steps, the Console must be in the Setup Mode. ◆ Each programming function is performed with similar keystrokes. After the Console is in Setup Mode, enter the programming step number, press th e [ HOME ] key (HOME = program), enter the new value, and p ...

  • Linear DVS-1200 - page 28

    Black 0028 Black 0028 CHANGING A SENSORS SUPERVISION ◆ When a sensor is programmed, the Con sole automatically recognizes it as supervised o r non-supervised. ◆ The Console ex pects hourly status transmiss ions from any sensor programmed as supervised. ◆ Any sensor can be programmed as supervised or non-supervised. ✍ NOTE: Don’t pro gram ...

  • Linear DVS-1200 - page 29

    Black 0029 Black 0029 FIRE SIREN TIME ◆ The factory-set fire siren time is five minutes (UL installation maximum). ◆ The fire siren time can be adjusted from on e to 30 minutes. AUTOMATION OUTPUT TIME ◆ The factory setting causes the Automatio n Output to toggle between on and off with each activation. ◆ The Automation Output can be pro gra ...

  • Linear DVS-1200 - page 30

    Black 0030 Black 0030 SILENT BURGLARY ALARMS ◆ The factory setting causes audible burglary alarms. ◆ Alternately, the Console can be programmed for silent burglary alarms. SILENT EMERGENCY ALARMS ◆ The factory setting causes audible emergency alarms. ◆ Alternately, the Console can be programmed for silent emergency alarms. DISABLING QUICK A ...

  • Linear DVS-1200 - page 31

    Black 0031 Black 0031 AUTOMATION OUTPUT MODE DURING ALARM ✍ NOTE: For the Automation Ou tput to acti vate during an alarm, t hat function must be enabled with Programming Step 71 or 72. ◆ If the Automation output is programmed to activate during an alarm, it can be programmed to flash or b e steady. AUTOMATION ACTIVATION TONE ◆ The factory se ...

  • Linear DVS-1200 - page 32

    Black 0032 Black 0032 AUTOMATION OUTPUT WHILE ARMED ◆ The factory setting causes the Console’s Automation Output to activate when pressing the [ (A) ] key, or when it’s triggered with a two-button remote control. ◆ In addition, the Console can b e programmed to activate the Automation Output when the system is armed. AUTOMATION OUTPUT DURIN ...

  • Linear DVS-1200 - page 33

    Black 0033 Black 0033 ADDITIONAL USER CODES ◆ The Console can be programmed with five restricted user codes and one page ale rt user code. ◆ The additional codes operate the system as usual, but cannot access Setup Mode. ◆ The additional codes can access a special Code Mode that can be used to change or remove any of the five restricted u ser ...

  • Linear DVS-1200 - page 34

    Black 0034 Black 0034 1 3. COMMUNICA T OR PROGRAMMING SETUP MODE ◆ To perform any of the commun icator programming steps, the Conso le must be in the Setup Mode. ◆ Each programming functio n is performed with similar keystrokes. After the Console is in Setup Mode, enter the programmin g step number, press the [ HOME ] key (HOME = program), ente ...

  • Linear DVS-1200 - page 35

    Black 0035 Black 0035 GENERAL COMMUNICATOR OPTIONS COMMUNICATOR ENABLE ◆ The factory setting for the Console disables the communicator. If th e system is going to be a non-monitored, local alarm only, leave the communicator disabled. ◆ If the system is going to be monitored b y a Central Station, enable the communicator with this programming st ...

  • Linear DVS-1200 - page 36

    Black 0036 Black 0036 CALL LIMITER ◆ The factory setting for the c all limiter is OFF. This allows the co mmunicator to report burglary alarms, once for each sensor, as many times as they are triggered. ◆ Optionally, the Console can be prog rammed to only allow five burglary reports to tal per arming pe riod. ✍ NOTE: Sen sors programmed to 24 ...

  • Linear DVS-1200 - page 37

    Black 0037 Black 0037 COMMUNICATOR REPORTING OPTIONS REPORTING FORMAT ◆ The factory setting causes the commu nicator to report using th e 4 by 2 format. This format allows four-digit accoun t numbers from 0000 to 9999 and provides two -digit alarm codes. ◆ Alternately ADEMCO CONTACT ID can be chosen as a reporting fo rmat. This format allows 4- ...

  • Linear DVS-1200 - page 38

    Black 0038 Black 0038 ACCOUNT NUMBER ◆ The communicator’s account numb er entered must be 4-digits lon g. ◆ The factory setting for th e account number is 0000. ◆ Enter an account n umber from 0000 to 9999. PRIMARY TELEPHONE NUMBER ◆ The primary Central Sta tion telephone number can be up to 20-digits lo ng. ◆ Digits 0-9 can be used. ? ...

  • Linear DVS-1200 - page 39

    Black 0039 Black 0039 REPORT CONSOLE TROU BLE ◆ The factory setting does not report Co nsole trouble events to the Central Station . ◆ Alternately, the communicator can be programmed to report Console trouble even ts. These include all con ditions that light th e Console’s BATTERIES or TROUBLE indicator. It also includes low Conso le backup b ...

  • Linear DVS-1200 - page 40

    Black 0040 Black 0040 COMMUNICATOR REPORTING CODES ◆ The two-digit communicator reportin g code for each event has a factory set value. These values may be customized to fit the specific installation and the reporting requirements of the Central Station monitoring the system. ◆ If Point ID reporting is enabled (the factory default setting), eac ...

  • Linear DVS-1200 - page 41

    Black 0041 Black 0041 FORCE ARMING REPORTING CODE ◆ Programming S tep #258 ◆ The factory set reporting code for force arming is “65” (Code 574 with Ad emco). ◆ Any value from 0-99 can be programmed for this event (0 = no report). ✍ NOTE: For force arming reporting, force arming reports must be enabled. See Page 37. DURESS REPORTING CODE ...

  • Linear DVS-1200 - page 42

    Black 0042 Black 0042 4 BY 2 FORMAT POINT ID REPORTING CODES 4 BY 2 FORMAT POINT ID ALARM REPORT CODES ◆ Refer to the 4 by 2 Format Point ID Repo rting Code table to view/edit the alarm reporting codes for each of the 12 sensors. The communicator will send these cod es if Point ID is enabled and any senso r triggers an alarm. The factory settings ...

  • Linear DVS-1200 - page 43

    Black 0043 Black 0043 POINT ID RE PORTING COD ES STEP # PROGRA MMING FUNCTION POSSIBLE VALUES FACTORY VALUE INSTALLATIO N VALUE 210 SENSOR 1 ALARM REPO RT CODE 0 - 99 11 211 SENSOR 2 ALARM REPO RT CODE 0 - 99 12 212 SENSOR 3 ALARM REPO RT CODE 0 - 99 13 213 SENSOR 4 ALARM REPO RT CODE 0 - 99 14 214 SENSOR 5 ALARM REPO RT CODE 0 - 99 15 215 SENSOR 6 ...

  • Linear DVS-1200 - page 44

    Black 0044 Black 0044 IMPOR T ANT INFORMA TION LINEAR LIMITED WARRANTY This Linear product is warranted against defects in material and workmanship for twelve (12) months. Th e Warranty Expiration Date is labeled on the product. This warranty extends only to wholesale customers who buy direct from Linea r or through Linear’s normal distribution c ...

Manufacturer Linear Category Home Security System

Documents that we receive from a manufacturer of a Linear DVS-1200 can be divided into several groups. They are, among others:
- Linear technical drawings
- DVS-1200 manuals
- Linear product data sheets
- information booklets
- or energy labels Linear DVS-1200
All of them are important, but the most important information from the point of view of use of the device are in the user manual Linear DVS-1200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Linear DVS-1200, service manual, brief instructions and user manuals Linear DVS-1200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Linear DVS-1200.

Similar manuals

A complete manual for the device Linear DVS-1200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Linear DVS-1200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Linear DVS-1200.

A complete Linear manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Linear DVS-1200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Linear DVS-1200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Linear DVS-1200, that we can find in the current document
3. Tips how to use the basic functions of the device Linear DVS-1200 - which should help us in our first steps of using Linear DVS-1200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Linear DVS-1200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Linear DVS-1200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Linear DVS-1200?

Use the form below

If you did not solve your problem by using a manual Linear DVS-1200, ask a question using the form below. If a user had a similar problem with Linear DVS-1200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)