Manual Nilfisk-ALTO E 130.2

18 pages 3.53 mb
Download

Go to site of 18

Summary
  • Nilfisk-ALTO E 130.2 - page 1

    Nilfi sk E 130.2, E 140.2 User Manual ...

  • Nilfisk-ALTO E 130.2 - page 2

    3 Inde x 1 Saf ety precautions and warnings ............................................. 3 2 Description ............................................................................... 4 3 Bef ore you star t using your pressure w asher ........................... 5 4 Operating y our pressure washer .............................................. 6 ...

  • Nilfisk-ALTO E 130.2 - page 3

    4 Extension cables should be of a watertight constr uction and comply with the below-men- tioned requirements f or length and cable dimensions . 1.0 mm² max. 12.5 m 1.5 mm² max. 20 m 2.5 mm² max. 30 m  Cable connections should be kept dry and off the ground. Mains power connection The f ollowing should be ob- ser ved when connecting the high ...

  • Nilfisk-ALTO E 130.2 - page 4

    5 2.2 Operation elements and model survey See illustration at the end of this manual. 1 Star t/stop switch 2 W ater inlet (with fi lter) 3 High pressure connection (only models without hose reel) 4 High pressure hose 5 Electric cable 6 Click & Clean spr ay lance 7 Spra y gun with lock 8 Click & Clean T ornado ® PR nozzle 9 Click & Cle ...

  • Nilfisk-ALTO E 130.2 - page 5

    6 3.3 Mounting of quick coupling 1. Screw the quic k coupling (16) tight on to the water inlet (2). Note: The inlet fi lter must al- wa ys be fi tted in the w ater inlet pipe to fi lter out sand, lime stone and other impurities as these will damage the pump v alves . Caution: F ailure to fi t the fi lter will inv alidate the guarantee.  4 O ...

  • Nilfisk-ALTO E 130.2 - page 6

    7 4.2 Mounting of spray lance and Click & Clean nozzles  2. Attach the nozzle. W arning: When attaching the Click & Clean nozzles, the pawl on the side of the spra y lance should come out again. Note: The T or- nado ® PR noz- zle and the f oam spra yer f eature a swiv el lock, which must be positioned in the hole in the Click & Clea ...

  • Nilfisk-ALTO E 130.2 - page 7

    8 4.5 Star t and stop of the ma- chine (when connected to a water supply) The spra y lance is aff ected by a thrust during opera- tion - theref ore alwa ys hold it fi r mly with both hands. IMPOR- T ANT : P oint the nozzle at the ground. 1. Check that the machine is in upright position. NO TE: Do not place the ma- chine in high grass! 2. Release t ...

  • Nilfisk-ALTO E 130.2 - page 8

    9 4.7 Pressure regulation on the T ORNADO ® PR- nozzle The pressure can be regulated on the TORNADO ® PR nozzle . 4.8 Stationary use If mounting a special wall hook (not standard), the pressure washer can be used as a sta- tionar y solution meaning that it can be operated while hanging on the wall. Only mount the wall hook on a sturdy wall. Adjus ...

  • Nilfisk-ALTO E 130.2 - page 9

    10 5 Fields of application and w orking methods 5.1 General Effi cient high presure cleaning is achiev ed by f ollowing a fe w guide- lines, combined with y our own personal e xper ience of specifi c cleaning tasks. Accessor ies and detergents, when correctly cho- sen, can increase the effi ciency of your pressure washer . Here is some basic inf ...

  • Nilfisk-ALTO E 130.2 - page 10

    11 5.2 T ypical fi elds of application Below y ou will fi nd a description of a lot of cleaning tasks which can be solved b y a pressure washer from Nilfi sk in association with accessor ies and detergents. T ask Accessories ‘Clic k & Clean’ Cleaning method Car Car nozzle, auto brush, underchassis nozzle, F oam spra yer , Car Combi Clean ...

  • Nilfisk-ALTO E 130.2 - page 11

    12  6 After using y our pressure washer 6.2 Winding up of electric cable and high pressure hose carefully up . 1. Wind up the electric cable on the appropriate hooks. Built- in clip f or good holding (1). The low er hook can be tur ned to release the electric cable . 2. The high pressure washer comes in two models: A) with hook f or storage of h ...

  • Nilfisk-ALTO E 130.2 - page 12

    13 W ARNING! Alwa ys disconnect the electrical plug from the sock et prior to maintenance or cleaning. T o ensure a long and problem free working life , please take the f ollowing advice:  Wash out w ater hose, high pressure hose, spr ay lance and accessories before mounting.  Clean the connectors of dust and sand. Make sure that no sand or d ...

  • Nilfisk-ALTO E 130.2 - page 13

    14 8 T r oub le-shooting T o av oid unnecessary disappointments, you should chec k the f ollowing bef ore contacting the Nilfi sk ser vice organization: Symptom Cause Recommended action Machine refuses to start Machine not plugged in Plug in machine. Def ective soc ket T r y another sock et. Fuse has blo wn Replace fuse. Switch off other machines. ...

  • Nilfisk-ALTO E 130.2 - page 14

    15 9 Fur ther inf ormation 9.1 Recycling the washer Make the old cleaner un usable immediately . 1. Unplug the cleaner and cut the electric cable. Do not discard electrical appli- ances with household waste . As specifi ed in European Direc- tiv e 2002/96/EC on old electr i- cal and electronic appliances, used electrical goods must be collected se ...

  • Nilfisk-ALTO E 130.2 - page 15

    16 9.3 Accessories Only use original accessor ies. Click & Clean Car nozzle Special nozzle f or enameled surfaces . Optimal distance: 30 - 50 cm. Click & Clean Undershassis nozzle 90° angled special nozzle f or undercarriage and wheel arches. Integrated guide shoes . Click & Clean Multiangle adaptor Adjusted in angles from 0° - 90° f ...

  • Nilfisk-ALTO E 130.2 - page 16

    17 EU Declaration of Conf ormity Product: High Pressure Washer T ype: Nilfi sk E 130.2, E 140.2 Description: 230 V 1~, 50 Hz - IP X5 The design of the unit corre- sponds to the follo wing pertinent regulations: EC Machine Directive 98/37/EC EC Low-v oltage Directive 73/23/EC EC EMV Directive 2004/108/EC Applied harmonised standards: EN 60335-2-79 ...

  • Nilfisk-ALTO E 130.2 - page 17

    ...

  • Nilfisk-ALTO E 130.2 - page 18

    128303203 a (02.2008) Nil fi sk, Division of Nil fi sk-Advance A/S, Industrivej 1, DK - 9560 Hadsund, tel.: (+45) 7218 2100 ...

Manufacturer Nilfisk-ALTO Category Pressure Washer

Documents that we receive from a manufacturer of a Nilfisk-ALTO E 130.2 can be divided into several groups. They are, among others:
- Nilfisk-ALTO technical drawings
- E 130.2 manuals
- Nilfisk-ALTO product data sheets
- information booklets
- or energy labels Nilfisk-ALTO E 130.2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nilfisk-ALTO E 130.2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nilfisk-ALTO E 130.2, service manual, brief instructions and user manuals Nilfisk-ALTO E 130.2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nilfisk-ALTO E 130.2.

A complete manual for the device Nilfisk-ALTO E 130.2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nilfisk-ALTO E 130.2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nilfisk-ALTO E 130.2.

A complete Nilfisk-ALTO manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nilfisk-ALTO E 130.2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nilfisk-ALTO E 130.2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nilfisk-ALTO E 130.2, that we can find in the current document
3. Tips how to use the basic functions of the device Nilfisk-ALTO E 130.2 - which should help us in our first steps of using Nilfisk-ALTO E 130.2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nilfisk-ALTO E 130.2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nilfisk-ALTO E 130.2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nilfisk-ALTO E 130.2?

Use the form below

If you did not solve your problem by using a manual Nilfisk-ALTO E 130.2, ask a question using the form below. If a user had a similar problem with Nilfisk-ALTO E 130.2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)