English dropdown-ico

Manual Lexicon RT-10

172 pages 1.27 mb
Download

Go to site of 172

Summary
  • Lexicon RT-10 - page 1

    RT - 1 0 Univer sal Disc Play er User Guide ...

  • Lexicon RT-10 - page 2

    READ INSTRUCTIONS – All the saf ety and operating instructions should be read before the product is operated. RET AIN INSTRUCTIONS – The safety and operating instructions should be retained for future ref erence. HEED W ARNINGS – All warnings on the product and in the operating instructions should be adhered to. FOLLO W INSTRUCTIONS – All o ...

  • Lexicon RT-10 - page 3

    BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULL Y : THE A V AILABLE POWER SUPPL Y VOL T AGE DIFFERS AMONG COUNTRIES AND REGIONS. MAKE SURE THE POWER SUPPL Y VOL T AGE OF THE AREA WHERE THIS UNIT WILL BE USED MEETS THE REQUIRED V OL T A GE (E.G., 230V OR 120V) WRITTEN ON THE REAR P ANEL. W ARNING T O REDUCE THE RI ...

  • Lexicon RT-10 - page 4

    OUTDOOR ANTENNA GROUNDING If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to pro vide some protection against voltage surges and b uilt-up static charges. Ar ticle 810 of the National Electrical Code, ANSI/NFP A 70, provides inf ormation with regard to proper grounding of the ...

  • Lexicon RT-10 - page 5

    Appears on your component to alert you to the presence of uninsulated, dangerous voltage inside the enclosure…v oltage that may be sufficient to constitute a risk of shoc k. Appears on your component to alert you to impor tant operating and maintenance instructions in this accompanying literature. W ARNING CA UTION Manufactured under license from ...

  • Lexicon RT-10 - page 6

    Introduction Lexicon iv Section 1: Getting Started About the RT -10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Highlights • Product Registration Installation Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Do . . . • Do Not . . . DVD-V Regions . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lexicon RT-10 - page 7

    Introduction R T -10 v Section 4: Playback Controls Playback Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Loading Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Navigating Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Selecting Disc Settings . . . . . . ...

  • Lexicon RT-10 - page 8

    Introduction Lexicon vi ENGLISH IMPORT ANT SAFETY INSTRUCTIONS • Sav e these instructions for later use. • Follo w all instructions and warnings mar ked on the unit. • Alwa ys use with the correct line voltage. Refer to the manufacturer’ s operating instructions for po wer requirements. Be advised that different operating voltages ma y requ ...

  • Lexicon RT-10 - page 9

    Introduction R T -10 vii ESP AÑOL INSTRUCCIONES DE SEGURID AD IMPORT ANTES • Guarde estas instrucciones para futuras referencias . • Siga todas las instrucciones y tenga en cuenta las advertencias que aparecen en la unidad y en las instrucciones de funcionamiento. • Utilice siempre la tensión de línea correcta. Consulte las instrucciones d ...

  • Lexicon RT-10 - page 10

    Introduction Lexicon viii IT ALIANO IMPORT ANTI NORME DI SICUREZZA • Conservare le presenti norme per l’utilizzo futuro. • Seguire sempre tutte le istruzioni e gli avvertimenti segnati sull’unità e nelle istruzioni operative . • Utilizzare sempre la corretta tensione di alimentazione. F are r iferimento al manuale del costruttore per le ...

  • Lexicon RT-10 - page 11

    Introduction R T -10 ix D ANSK VIGTIG INFORMA TION OM SIKKERHED • Gem denne vejledning til senere brug. • Fø lg alle anvisninger og adv arsler på apparatet. • Apparatet skal altid tilsluttes den korrekte spænding. Der henvises til brugsanvisningen, der indeholder specifikationer for strø mforsyning. Der gø res opmær ksom på, at ved var ...

  • Lexicon RT-10 - page 12

    Introduction Lexicon x NORSK VIKTIG INFORMASJON OM SIKKERHET • T a v are på denne veiledningen f or senere bruk. • Fø lg alle anvisningene og adv arslene som er angitt på apparatet. • Apparatet skal alltid anv endes med korrekt spenning. Produktbeskrivelsen inneholder spesifikasjoner for strø mkrav . Vær oppmerksom på at det ved ulik e ...

  • Lexicon RT-10 - page 13

    Introduction R T -10 xi Unpacking and Inspection After unpacking the unit, save all packing materials in case the unit ever needs to be shipped. Thoroughly inspect the modules and packing materials for signs of damage. Report any damage to the carrier at once; report equipment malfunction to the dealer . Auspacken und Überprüfung Bewahren Sie nac ...

  • Lexicon RT-10 - page 14

    1 Getting Started About the RT -10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Highlights • Product Registration Installation Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Do . . . • Do Not . . . DVD-V Regions . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lexicon RT-10 - page 15

    Getting Started Lexicon 1-2 ABOUT THE RT -10 Thank you for purchasing the RT -10 Disc Player , a reference-quality universal disc transport designed to provide superior audio and video performance with virtually any 3- or 5-inch optical media disc format. Based on leading-edge DVD and SACD research, the RT -10 supports DVD-V , DVD-A, DVD-RW/R, SACD ...

  • Lexicon RT-10 - page 16

    Getting Started R T -10 1-3 HIGHLIGHTS • DVD-V , DVD-A, and DVD-RW/R compatibility • SACD compatibility • Audio CD, CD-RW/R, Video CD, and SVCD compatibility • 12-bit/108MHz D/A video conversion • Progressive-scan component video output on BNC, RCA, or Mini-D Ribbon connectors • T rue 3:2 pull-down for the finest film-based DVD reproduc ...

  • Lexicon RT-10 - page 17

    Note: The R T -10 lens should not become dirty or damaged from regular use. However , if malfunction occurs, contact an authorized Lexicon dealer for assistance. Do not attempt to clean the lens with a commercially available DVD or CD lens cleaner , as some of these products might damage the R T -10 lens. DVD-V REGIONS The map shown below indicates ...

  • Lexicon RT-10 - page 18

    Format Logo Disc Compatibility Requirements Additional Information Getting Started R T -10 1-5 DVD-V DVD-A The RT -10 supports: • 5-inch (12cm) or 3-inch (8cm) discs • Dolby Digital, DTS, MPEG, or PCM (Linear) digital audio • MPEG-2 video • Single- or double-sided discs • Single- or dual-layered discs The RT -10 supports: • 5-inch (12cm ...

  • Lexicon RT-10 - page 19

    Format Logo Disc Compatibility Requirements Additional Information Getting Started Lexicon 1-6 Disc Compatibility (continued from page 1-5) SACD Audio CD The RT -10 supports: • 5-inch (12cm) or 3-inch (8cm) discs • Digital audio (DSD) • Single-, dual-, or hybrid-layered discs The RT -10 supports: • 5-inch (12cm) or 3-inch (8cm) discs • PC ...

  • Lexicon RT-10 - page 20

    Format Logo Disc Compatibility Requirements Additional Information Getting Started R T -10 1-7 Video CD SVCD MP3 The RT -10 supports: • 5-inch (12cm) or 3-inch (8cm) discs • MPEG-1 digital audio and MPEG-2 video The RT -10 supports: • 5-inch (12cm) or 3-inch (8cm) discs • PCM (Linear) digital audio The RT -10 supports: • MP3 tracks record ...

  • Lexicon RT-10 - page 21

    • Load single-sided discs with the label side facing upward and double-sided discs with the side intended for playback facing downward. All loaded discs must align with the circular guide inside the disc drawer . • Return discs to their cases when not in use. Discs should be stored in an upright position out of direct sunlight and excessive hea ...

  • Lexicon RT-10 - page 22

    Getting Started R T -10 1-9 The remote control requires two AA batteries that should be replaced as needed. It is strongly recommended to use Alkaline batteries, which last longer without leaking. T o replace the remote control batteries: 1. Locate the battery compartment on the back of the remote control. Then, remove the battery compartment cover ...

  • Lexicon RT-10 - page 23

    2 Basic Operation Front Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Front Panel Display Indicators Rear Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 Rear Panel Connections Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lexicon RT-10 - page 24

    1 Basic Operation Lexicon 2-2 2. Standby LED Lights to indicate that standby mode is activated. Standby mode can be activated and deactivated with the remote control POWER button or with an associated component connected to the RT -10 trigger input connector . Standby mode is automatically activated after 30 minutes of non-use when the AUTO_P param ...

  • Lexicon RT-10 - page 25

    4. Front Panel Display Provides at-a-glance viewing of status information about the RT -10 and the loaded disc. Refer to the Front Panel Display section that begins on page 2-6 for more information. 5. Display Off Button Activates and deactivates the front panel display . When the front panel display is activated, pressing the Display Off button de ...

  • Lexicon RT-10 - page 26

    Basic Operation Lexicon 2-4 7. Pause Button  Activates pause mode, which pauses playback of the loaded disc at the current playback time. When playback is activated, pressing the Pause button activates pause mode at the current playback time. In some cases, a still frame image appears on the associated display device screen. When pause mode is a ...

  • Lexicon RT-10 - page 27

    Basic Operation R T -10 2-5 9. Reverse Skip/Scan Button  /  Skips and scans in reverse direction through the loaded disc. When resume or stop mode is activated, pressing the  /  button activates playback from the beginning of the loaded disc. When playback or pause mode is activated: • Pressing and releasing the  /  button skips ...

  • Lexicon RT-10 - page 28

    Basic Operation Lexicon 2-6 V - PART GRP TITLE 192kHz 96kHz CHP LAST TOTAL COND REMAIN 5.1CH DOWN MIX VCD TRK D OFF PROGRESSIVE DOLBY D LFE C R L S LS RS V OFF 1 The numbers in the R T -10 front panel display illustration shown above correspond to the numbered items that begin below . 1. (Character Display) Provides at-a-glance viewing of status in ...

  • Lexicon RT-10 - page 29

    Basic Operation R T -10 2-7 11. Indicates that the second character on the character display (previous page) is a track number . 12. Indicates that the last three characters on the character display (number 1) represent the remaining playback time. 13. Indicates that the last three characters on the character display (previous page) represent the t ...

  • Lexicon RT-10 - page 30

    REAR P ANEL OVERVIEW The RT -10 is manufactured for sale in several different countries. Each version features a rear panel that includes connectors and safety instructions appropriate to that particular region. Note: The rear panel shown on the next page includes all possible connectors. However , certain connectors are not included on some versio ...

  • Lexicon RT-10 - page 31

    Damaged power cords can cause fire or electric shock. Please observe the follo wing when handling power cords: • Handle power cords at the plug. • Nev er disconnect power cords by pulling on the cord. • Nev er touch power cords with wet hands, as this could cause shor t circuit or electric shock. • Protect power cords from being pinched or ...

  • Lexicon RT-10 - page 32

    Basic Operation Lexicon 2-10 3. Component Video Output Connectors (continued) The component video output connectors provide progressive- scan and interlaced component video output. Progressive-scan component video output converts interlaced video signals to progressive video signals, doubling the amount of video information sent to a compatible dis ...

  • Lexicon RT-10 - page 33

    Basic Operation R T -10 2-11 Note: The trigger input switch setting does not take effect until the R T -10 is power cycled with the front panel On/Off button. 10. T rigger Input Connector Allows the RT -10 to be controlled with an associated component that includes a 12V DC trigger output connector , such as the MC-12 or MC-8 Digital Controllers. A ...

  • Lexicon RT-10 - page 34

    Basic Operation Lexicon 2-12 Video Connections (continued from page 2-11) When a component video output connection is not possible, it is recommended to use an S-video output connection, which provides better picture quality than a composite video output connection. All versions offer S-video output on an S-video output connector . S-video cables c ...

  • Lexicon RT-10 - page 35

    Basic Operation R T -10 2-13 2 4 6 8 10 12 14 16 18 20 21 1 3 5 7 9 11 13 15 17 19 Pin Description 1 Audio Out Right 2N C 3 Audio Out Left + Mono 4 Audio Ground 5 RGB Blue Ground 6N C 7 RGB Blue Out 8 Audio/RGB Switch/16:9 9 RGB Green Ground 10 NC 11 RGB Green Out Euro or Peritel (TV A/V) Connector Pin Description 12 NC 13 RGB Red Ground 14 Ground ...

  • Lexicon RT-10 - page 36

    Basic Operation Lexicon 2-14 REMOTE CONTROL OVERVIEW The RT -10 remote control provides full operation of the RT -10, executing functions such as menu navigation that are not available from the front panel. The numbers in the RT -10 remote control illustrations shown on pages 2-15 to 2-18 correspond to the numbered items in the Command Matrix that ...

  • Lexicon RT-10 - page 37

    Basic Operation R T -10 2-15 Button Command 1 POWER Activates and deactivates standby mode when all of the following conditions are met: • The RT -10 is not configured for trigger control. • The RT -10 is powered on with the front panel On/Off button. • The trigger input switch is set to OFF . When standby mode is deactivated, pressing the PO ...

  • Lexicon RT-10 - page 38

    Command Button Basic Operation Lexicon 2-16 7 SETUP Opens and closes the Setup (3-9) and Advanced Setup (3-51) menus. 8 RETURN Closes certain Setup menu screens without saving changes. Refer to Section 3 for more information. 9 PROGRAM Activates program mode (4-22), which creates a program list for the loaded disc. When a program list has been crea ...

  • Lexicon RT-10 - page 39

    OPEN/ CLOSE 3 2 1 VIDEO ON/OFF DIMMER POWER CLEAR 6 5 4 +10 9 8 7 0 RETURN PROGRAM SEARCH TOP MENU SETUP MENU ENTER STOP PLA Y PREV NEXT RANDOM F .MEMO VIDEO ADJ. A-B REPEA T DISPLA Y ANGLE SUBTITLE AUDIO LAST MEMO CONDITION MEMO Basic Operation R T -10 2-17 Button Command 16 PREV Skips to the beginning of the current chapter or track. Subsequent p ...

  • Lexicon RT-10 - page 40

    OPEN/ CLOSE 3 2 1 VIDEO ON/OFF DIMMER POWER CLEAR 6 5 4 +10 9 8 7 0 RETURN PROGRAM SEARCH TOP MENU SETUP MENU ENTER STOP PLA Y PREV NEXT RANDOM F .MEMO VIDEO ADJ. A-B REPEA T DISPLA Y ANGLE SUBTITLE AUDIO LAST MEMO CONDITION MEMO Basic Operation Lexicon 2-18 Button Command Activates pause mode, which pauses playback of the loaded disc at the curren ...

  • Lexicon RT-10 - page 41

    3 Setup Menus Control Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Setup Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 Audio1 • Audio2 ? ...

  • Lexicon RT-10 - page 42

    Setup Menus Lexicon 3-2 Note: The Setup menu should be used to configure the R T -10 before attempting disc playback. CONTROL BAR When a Setup menu screen is open, a control bar similar to the one shown below appears at the bottom of the on-screen display to indicate which remote control buttons are available for the open screen. These buttons appe ...

  • Lexicon RT-10 - page 43

    Setup Navigator Prompt Available Settings Associated Setup Menu Parameter(s) Setup Menus R T -10 3-3 Setup Navigator OSD Language TV T ype Analog Jacks Center Speaker • Start • Auto Start Off • Widescreen (16:9) • Standard (4:3) • Present ` • Not Present • 2 Channel • 5.1 Channel ` • Not Connected •N o • Y es ` • Don’t Kno ...

  • Lexicon RT-10 - page 44

    Setup Menus Lexicon 3-4 1 2 3 4 5 Setup using the Setup Navigator 7 Setup Navigator Start Auto Start Off Audio1 Language General Video1 A2 V2 Move Select Exit Setup Navigator Start ENTER SETUP ! 1 2 Language 4 5 Select the On Screen Language 7 Setup Navigator English francais Deutsch Italiano Espanol Audio1 Language General Video1 A2 V2 Move Select ...

  • Lexicon RT-10 - page 45

    Setup Menus R T -10 3-5 TV T ype Widescreen (16:9), Standard (4:3) Controls the appearance of the picture on the associated display device screen, formatting the aspect ratio of the video output format to match the aspect ratio of the display device. Aspect ratios, which refer to width relative to height, differ among video output formats and displ ...

  • Lexicon RT-10 - page 46

    Setup Menus Lexicon 3-6 Center Speaker Present, Not Present Indicates the presence or absence of a center speaker . When Present is selected, the RT -10 passes center channel signals to the Center analog audio output connector . When Not Present is selected, the RT -10 redirects center channel signals to the Front L/R analog audio output connectors ...

  • Lexicon RT-10 - page 47

    1 2 Amp Connection 4 5 Sub-woofer is connected to an amplifier Setup Navigator Present Not Present Audio1 Language General Video1 A2 V2 Move Select Exit Sub-woofer Present ENTER SETUP ! Setup Menus R T -10 3-7 Sub-woofer Present, Not Present Indicates the presence or absence of a subwoofer . When Present is selected, the RT -10 passes subwoofer sig ...

  • Lexicon RT-10 - page 48

    Setup Menus Lexicon 3-8 Select No if the associated component is not compatible with 96kHz PCM sources. The RT -10 will downsample 96kHz PCM signals to 48kHz before passing them to the associated component. Select Y es if the associated component is compatible with 96kHz PCM sources. The RT -10 will not downsample 96kHz PCM signals before passing t ...

  • Lexicon RT-10 - page 49

    Setup Menus R T -10 3-9 Exit Setup Navigator Save or Delete Changes, Start Again Determines whether Setup Navigator prompt settings are saved, deleted, or reentered. Select Save Changes to save prompt settings and close the Setup Navigator . Select Delete Changes to delete prompt settings and close the Setup Navigator . Select Start Again to reente ...

  • Lexicon RT-10 - page 50

    Setup Menus Lexicon 3-10 Setup Menu (Expert Mode) Setup Menu (Basic Mode) Setup Menu Mode --- Expert Setup Navigator Parental Lock --- Off(us) Bonus Group Auto Disc Menu --- On Group Playback --- Single Audio1 Language General Video1 A2 V2 Move Exit SETUP OSD Language --- English Audio Language --- English Subtitle Language --- English Auto Languag ...

  • Lexicon RT-10 - page 51

    Possible Settings Default Setting Parameter Setup Menus R T -10 3-11 Note the following: • The RT -10 is manufactured for sale in several different countries. Certain parameters are not available on some versions. Default parameter settings might differ among versions. • The Setup menu can be opened while the RT -10 is in playback, pause, resum ...

  • Lexicon RT-10 - page 52

    Audio DRC (Dynamic Range Control) Off, On Controls the dynamic range of Dolby Digital-encoded sources. When On is selected, the RT -10 reduces the dynamic range of high-level peaks. As a result, low-level sounds become more audible. When Off is selected, the RT -10 maintains the original dynamic range of low- and high-level sounds. Note: This param ...

  • Lexicon RT-10 - page 53

    Setup Menus R T -10 3-13 DTS Out DTS, DTS  PCM Controls DTS audio output format when a DTS source is present and the RT -10 is using the digital audio output connector . Select DTS if the associated component is compatible with DTS sources. The RT -10 will pass DTS signals directly to the associated component. Select DTS  PCM if the associate ...

  • Lexicon RT-10 - page 54

    Setup Menus Lexicon 3-14 Select MPEG if the associated component is compatible with MPEG sources. The RT -10 will pass MPEG signals directly to the associated component. Select MPEG  PCM if the associated component is not compatible with MPEG sources. The RT -10 will convert MPEG signals to PCM before passing them to the associated component. Th ...

  • Lexicon RT-10 - page 55

    Setup Menus R T -10 3-15 SACD Playback 2ch Area, Multi-ch Area, CD Area Controls SACD output format when an SACD is loaded and the RT - 10 is using the digital audio output connector . This parameter set- ting has no effect when another disc format is loaded. SACDs can include up to three different audio tracks – a stereo track, a multi-channel t ...

  • Lexicon RT-10 - page 56

    Setup Menus Lexicon 3-16 Audio Out 2 Channel, 5.1 Channel Controls analog audio output format when the RT -10 is using the analog audio output connectors. When 2 Channel is selected, the RT -10 passes analog audio sour ces to the Front L/R analog audio output connectors. When 5.1 Channel is selected, the RT -10 passes analog audio sour ces to the F ...

  • Lexicon RT-10 - page 57

    Front L/R Center Surround L/R Subwoofer Dolby Digital or MPEG  PCM Dolby Digital or MPEG Analog Audio Output Digital Audio Output Audio Out Parameter Source Setup Menus R T -10 3-17 Dolby Digital- encoded D V D - V Dolby Digital- encoded (Karaoke) dts-encoded MPEG- encoded DVD-A DVD-RW/R 2 Channel 5.1 Channel 2 Channel 5.1 Channel 2 Channel 5.1 ...

  • Lexicon RT-10 - page 58

    Possible Distance Settings Default Distance Setting Possible Size Settings Default Size Setting Parameter Setup Menus Lexicon 3-18 Audio2 (continued from page 3-17) Speaker Setting Start Opens the Speaker Setting screens, which can be used to set speaker sizes and distances when the RT -10 is using the 5.1-channel analog audio output connectors. Sp ...

  • Lexicon RT-10 - page 59

    Setup Menus R T -10 3-19 Setting Speaker Sizes The Speaker Size screen shown above can be used to set speaker sizes and crossover points for the front, center , surround, and subwoofer speakers. Refer to the manufacturer documentation to determine the low-frequency response of each speaker . Note: Speaker size settings have no effect when: • A DV ...

  • Lexicon RT-10 - page 60

    Setup Menus Lexicon 3-20 Note: Speaker distance settings have no effect when: • An SACD is loaded. • The R T -10 is using the 2-channel analog audio output connectors. • The R T -10 is using the digital audio output connector . T o set speaker distances: 1. When the Speaker Size screen opens, press the remote control  arrow to open the Spe ...

  • Lexicon RT-10 - page 61

    Setup Menus R T -10 3-21 • The L/R distance parameter setting affects all other speaker distance parameter settings. The C and SW parameters must be set within 6.5 feet (2m) of the L/R parameter , and the LS and RS parameters must be set within 20 feet (6m) of the L/R parameter . • When the L/R parameter setting is increased, other parameter se ...

  • Lexicon RT-10 - page 62

    Possible T est T one Settings Default T est T one Setting Possible Gain Settings Default Gain Setting Parameter Setup Menus Lexicon 3-22 Before output level calibration begins: • It is recommended to use a Sound Pressure Level (SPL) meter to calibrate variable output levels. An SPL meter is a device that measures the relative loudness of each spe ...

  • Lexicon RT-10 - page 63

    Setup Menus R T -10 3-23 • Eliminate extraneous noises in the listening space such as conversations, air conditioners, and sounds that filter in through open doors and windows. • Remove objects (including people) that obstruct the line-of- sight path between the SPL meter and the speaker being measured. • Output levels should be calibrated to ...

  • Lexicon RT-10 - page 64

    Setup Menus Lexicon 3-24 VIDEO1 Includes parameters that control video output format, as well as the Time and Frame + T ime search modes and the Lexicon screen saver . CD Digital Direct On, Off Prevents DTS-encoded CDs from outputting digital noise. This parameter has no effect on other disc formats and input sources. When On is selected, the RT -1 ...

  • Lexicon RT-10 - page 65

    Setup Menus R T -10 3-25 TV Screen Refer to the table on the previous page Controls the appearance of the picture on the associated display device screen, formatting the aspect ratio of the video output format to match the aspect ratio of the display device. Aspect ratios, which refer to width relative to height, differ among video output formats a ...

  • Lexicon RT-10 - page 66

    Setup Menus Lexicon 3-26 setting, and the TV T ype prompt Standard (4:3) setting is equivalent to the TV Screen parameter 4:3 (Letter Box) setting. The TV Screen parameter also offers settings for 16:9 (Compressed) and 4:3 (Pan&Scan) viewing. Refer to the table on pages 3-25 and below for more information. Note: • Some discs do not allow vide ...

  • Lexicon RT-10 - page 67

    Setup Menus R T -10 3-27 Component Video Progressive, Interlace Controls component video output format when the RT -10 is using the component video output connectors. Select Progressive if the associated display device provides a progressive-scan component video input connector . Select Interlace if the associated display device does not provide a ...

  • Lexicon RT-10 - page 68

    Setup Menus Lexicon 3-28 Video1 (continued from page 3-27) TV Screen --- 16:9 (Wide) Component Video --- Progressive Video Out --- Video S-Video Out --- S2 Frame Search --- Off Screen Saver --- Off Audio1 Language General Video1 A2 V2 Move Exit SETUP S1 S2 S-Video Out TV Screen --- 16:9 (Wide) Component Video --- Progressive Video Out --- Video S-V ...

  • Lexicon RT-10 - page 69

    Setup Menus R T -10 3-29 VIDEO2 Includes parameters that control video output format and on-screen display appearance. Background Gray , Black Determines the background color of Setup menu screens when resume or stop mode is activated. The video output signal appears behind Setup menu screens when playback or pause mode is activated. Video Adjust S ...

  • Lexicon RT-10 - page 70

    Video2 (continued from page 3-29) Pure Cinema Auto1, Auto2, On, Off Controls DVD-V frame rate to simulate cinema screen picture quality . V ideo sources can be recorded on video or film. Sour ces recorded on video have a 30 frames-per-second (NTSC) rate, and sources recorded on film have a 24 frames-per-second rate. When the Component parameter is ...

  • Lexicon RT-10 - page 71

    Parameter Setup Menus R T -10 3-31 TV (CRT) PDP Professional Default Setting Possible Settings Pure Cinema YNR CNR MNR BNR Sharpness High Auto1 442 4 4 Sharpness Mid Detail White Level Black Level Black Setup Gamma 4 444 4 444 Hue 444 Chroma Level 444 Chroma Delay Memory Prog. Motion 4 444 Off Off Off 44 7.5 IRE 7.5 IRE 7.5 IRE 44 6 4 4 00 0 0 000 ...

  • Lexicon RT-10 - page 72

    Setup Menus Lexicon 3-32 Chroma Delay min to max Compensates for misalignment of the Y (luminance) and C (chrominance) components present in video signals. Memory Off, 1, 2, 3 Determines the memory bank in which user-defined Video Adjust settings are stored. The RT -10 includes three memory banks called 1, 2, and 3. T o configure and store memory b ...

  • Lexicon RT-10 - page 73

    Setup Menus R T -10 3-33 2. When the Video Adjust bar opens, press the remote control  and  arrows to highlight the V ideo Setup option. Then, press the remote control ENTER button to select this option. 3. When the Video Setup bar opens: • Proceed to step 4 to configure memory banks from the Video Setup bars shown on the previous page. The ...

  • Lexicon RT-10 - page 74

    Setup Menus Lexicon 3-34 Video Adjust (continued ) Prog. Motion fast to slow Controls the still picture quality when the RT -10 is using the component video output connectors. This parameter is not available unless the RT -10 is using the component video output connectors. Selecting Video Adjust Banks The Video Memory Select bar shown above can be ...

  • Lexicon RT-10 - page 75

    Angle Indicator On, Off Activates and deactivates the indicator . When set to On, the indicator appears on the front panel display when playback of a scene recorded from multiple camera angles is in progress. When set to Off, the indicator does not appear on the front panel display when playback of a scene recorded from multiple camera angles is in ...

  • Lexicon RT-10 - page 76

    Setup Menus Lexicon 3-36 OSD Language English, français, Deutsch, Italiano, Español Determines the language in which RT -10 on-screen display menus appear . The OSD Language parameter is associated with the Setup Navigator OSD Language prompt (3-4). LANGUAGE Includes parameters that can be used to determine RT -10 on-screen display menu, disc men ...

  • Lexicon RT-10 - page 77

    Setup Menus R T -10 3-37 Audio Language Refer to the table on pages A-14 and A-15 Determines the language in which audio is heard. If the selected audio language is available on the loaded DVD, the RT -10 selects the audio track that includes that language. If the selected audio language is not included on the loaded DVD, the RT -10 selects the def ...

  • Lexicon RT-10 - page 78

    Setup Menus Lexicon 3-38 b. Press the remote control  arrow to move the cursor to the first character space that appears on the right of the on-screen display . Then, use the remote control number buttons to enter the numeric code for the desired language. Refer to the table that begins on page A-14 to determine the appropriate numeric code. Whe ...

  • Lexicon RT-10 - page 79

    Setup Menus R T -10 3-39 • The remote control SUBTITLE button can be used to select the desired subtitle language on the loaded DVD. Refer to page 4-8 for more information. Auto Language On, Off Controls audio track and subtitle language selection. When On is selected, the RT -10 automatically selects the default disc audio track and subtitle lan ...

  • Lexicon RT-10 - page 80

    Setup Menus Lexicon 3-40 Note: Some DVDs allow menu language to be selected from the disc menu. Refer to page 4-3 for more information. Subtitle Display On, Off, Assist Subtitle Controls the appearance of subtitles on the on-screen display . Select On to display subtitles when playback mode is activated. Select Off to prevent subtitles from display ...

  • Lexicon RT-10 - page 81

    • If the loaded disc does not include subtitles, subtitles do not appear on the on-screen display , regardless of Language tab parameter settings. Subtitle Off With Audio, Selected Subtitle Determines the language in which subtitles appear if the loaded disc displays subtitles when the Subtitle Display parameter (previous page) is set to Off. In ...

  • Lexicon RT-10 - page 82

    Possible Settings Default Setting Control Setup Menus Lexicon 3-42 Parental Lock Password, Level, Country Code Opens the Password, Level, and Country Code controls, which can be used to assign a user-defined password that must be entered before the RT -10 will activate playback mode when a disc encoded with a user-defined security level is loaded. ...

  • Lexicon RT-10 - page 83

    Setup Menus R T -10 3-43 Password Assigns a user-defined password that must be entered before the RT -10 will activate playback mode when a disc encoded with a user-defined security level or country code is loaded. A user-defined password must be assigned before the Level and Country Code controls can be adjusted. User-defined passwords are automat ...

  • Lexicon RT-10 - page 84

    Setup Menus Lexicon 3-44 • When a number is entered, the cursor automatically advances to the next character space. Press the  arrow to return to the previous character space or the  arrow to advance to the next character space. • The number entered in the selected character space appears as an actual number . Numbers entered in unselecte ...

  • Lexicon RT-10 - page 85

    Setup Menus R T -10 3-45 T o assign a new password: When a user-defined password is assigned, that password must be entered before a new password can be assigned. When the current password is confirmed, the Parental Lock: Password Change screen opens on the on-screen display . Note: If the assigned password is lost or forgotten, factory- default se ...

  • Lexicon RT-10 - page 86

    Setup Menus Lexicon 3-46 General (continued from page 3-45) L e v e l 12345678 Parental Lock: Level Change Audio1 Language General Video1 A2 V2 Move Enter Exit Return Off SETUP SETUP ENTER Setup Menu Mode --- Expert Setup Navigator Parental Lock --- Off(us) Bonus Group Auto Disc Menu --- On Group Playback --- Single Audio1 Language General Video1 A ...

  • Lexicon RT-10 - page 87

    Setup Menus R T -10 3-47 ENTER Country Code Refer to the table on page A-16 Assigns a security level based on country code, requiring the password before the RT -10 will activate playback mode when a disc encoded with an incompatible country code is loaded. The Country Code control has no effect when the Level control is set within its 1 to 8 range ...

  • Lexicon RT-10 - page 88

    Setup Menus Lexicon 3-48 T o enter DVD-A bonus group access codes: 1. When the Bonus Group: Key Number Input screen opens, use the remote control number buttons to enter the bonus group access code. • When a number is entered, the cursor automatically advances to the next character space. Press the  arrow to return to the previous character sp ...

  • Lexicon RT-10 - page 89

    Setup Menus R T -10 3-49 Auto Disc Menu On, Off Enables and disables automatic opening of DVD menus and top menus. This parameter has no effect on other disc formats or on DVDs that do not include menus or top menus. When On is selected, DVD menus and top menus automatically open on the on-screen display when a DVD that includes menus or top menus ...

  • Lexicon RT-10 - page 90

    Setup Menus Lexicon 3-50 • If a shortcut cannot be created for the highlighted parameter , the icon shown at the right will appear on the on-screen display . Shortcuts cannot be created for the Setup menu parameters listed in the Note: in the previous column. T o use a Setup menu shortcut: 1. If the Setup menu is closed, proceed to step 2. If the ...

  • Lexicon RT-10 - page 91

    Setup Menus R T -10 3-51 The Advanced Setup menu can be used to configure advanced RT -10 mode settings for CD, SACD, and MP3 display mode, standby mode, and remote control command mode. Unlike the Setup menu, the Advanced Setup menu opens on the front panel display , which provides one-line viewing of parameters and settings as shown above. DISP_M ...

  • Lexicon RT-10 - page 92

    Setup Menus Lexicon 3-52 DISP_MODE DISP_ON, DISP_OFF Determines the front panel display mode for SACD, CD, and MP3 playback. This parameter setting has no effect when other disc formats are loaded. Select DISP_ON to deactivate the front panel display and rear panel video output connectors during SACD, CD, and MP3 playback. When SACD, CD, or MP3 pla ...

  • Lexicon RT-10 - page 93

    Setup Menus R T -10 3-53 REMOT_CODE DVD_1, DVD_2 Assigns a remote control command mode to the RT -10. When DVD_1 is selected, the RT -10 can be operated with an RT -10 remote control to which the DVD_1 command mode is also assigned. When DVD_2 is selected, the RT -10 can be operated with an RT -10 remote control to which the DVD_2 command mode is a ...

  • Lexicon RT-10 - page 94

    4 Playback Contr ols Playback Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Loading Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Navigating Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Selecting Disc Set ...

  • Lexicon RT-10 - page 95

    Playback Controls Lexicon 4-2 Note the following: • The RT -10 is compatible with DVD-V , DVD-A, DVD-RW/R, SACD, Audio CD, CD-RW/R, Video CD, SVCD, and MP3 formats that meet the requirements outlined in the Disc Compatibility section (1-5). The RT -10 is not compatible with DVD-ROM, DVD-RAM, CD-ROM (except those that include MP3 tracks), and Phot ...

  • Lexicon RT-10 - page 96

    Playback Controls R T -10 4-3 • The RT -10 will attempt to load a disc whenever the disc drawer is closed, even when the disc drawer is empty . T o load a disc: 1. Review the bulleted items that begin on the previous page. 2. Press the Open/Close button to open the disc drawer . 3. If the disc drawer is not empty , remove the disc loaded in the d ...

  • Lexicon RT-10 - page 97

    Playback Controls Lexicon 4-4 No. Description 1 Indicates the numbers of the currently playing folder and track. The MP3 Navigator does not provide this information unless playback is activated. 2 Indicates the number of the selected folder and the number of folders included on the loaded disc. The RT -10 recognizes a maximum of 250 folders per dis ...

  • Lexicon RT-10 - page 98

    Button DVD-V & DVD-A DVD-RW/R Video CD & SVCD MP3 Playback Controls R T -10 4-5 When a DVD-V is loaded, pressing the MENU button opens and closes the disc menu, provided the loaded disc includes a menu. In some cases, pressing the TOP MENU button also opens and closes the menu. When a DVD-A is loaded, pressing the TOP MENU button opens and ...

  • Lexicon RT-10 - page 99

    Playback Controls Lexicon 4-6 Button DVD-V & DVD-A DVD-RW/R Video CD & SVCD MP3 Scroll upward and downward through disc menu items. In some cases, pressing the  and  arrows scrolls left and right through menu items Scroll left and right through disc menu items. In some cases, pressing the  and  arrows scrolls upward and downward ...

  • Lexicon RT-10 - page 100

    Playback Controls R T -10 4-7 SELECTING DISC SETTINGS Some disc menus can be used to select disc settings such as audio track (audio language and output format), subtitle language, and camera angle. In some cases, certain remote control buttons can also be used to select these settings without navigating through the disc menu. Note: Condition memor ...

  • Lexicon RT-10 - page 101

    Playback Controls Lexicon 4-8 T o select a subtitle language: 1. When playback is activated, press the SUBTITLE button to open the Subtitle bar shown above. • The Subtitle bar indicates the language in which the selected subtitles were recorded. For instance, the Subtitle bar shown above indicates that the selected subtitles were recorded in Engl ...

  • Lexicon RT-10 - page 102

    Playback Controls R T -10 4-9 CAMERA ANGLES • Pressing the remote control ANGLE button opens the Angle bar shown below , which can be used to select the desired camera angle. • Camera angle selection is available for DVD-V scenes recorded from multiple camera angles. Camera angle selection is not available for other disc formats or for DVD-V sc ...

  • Lexicon RT-10 - page 103

    Playback Controls Lexicon 4-10 T o store preferred disc settings: 1. Make sure a DVD-V that allows selection of on-screen display disc menu language, audio track (audio language and output format), subtitle language, camera angle, Video Adjust, or parental security level settings is loaded. 2. Refer to the Navigating Disc Menus section (4-3) for in ...

  • Lexicon RT-10 - page 104

    Playback Controls R T -10 4-11 T o delete preferred disc settings: 1. Make sure a DVD-V for which preferred disc settings have been stored is loaded. 2. When the disc is loaded, press the Play button to activate playback. 3. When playback is activated, press the CONDITION MEMO button to open the Condition Memory bar shown on the previous page. 4. W ...

  • Lexicon RT-10 - page 105

    Playback Mode* DVD-V & DVD-RW/R DVD-A SACD Audio CD & CD-RW/R Video CD SVCD MP3 Playback Controls Lexicon 4-12 Playback Modes (continued from page 4-11) Available A vailable Available Available A vailable Available A vailable Playback Available A vailable Available Available A vailable Available A vailable Display Available Not A vailable N ...

  • Lexicon RT-10 - page 106

    Playback Controls R T -10 4-13 LAST MEMORY PLA YBACK • The remote control LAST MEMO button can be used to activate last memory playback, which creates a bookmark at the current playback time. Later , playback can be reactivated from the bookmarked playback time. • Bookmarks can be stored for up to five discs. The oldest bookmark is automaticall ...

  • Lexicon RT-10 - page 107

    Playback Controls Lexicon 4-14 RESUME MODE • The front panel and remote control Stop button can be used to activate resume mode, which pauses playback at the current playback time. Later , playback can be reactivated from this playback time. • Audio automatically mutes when resume mode is activated. T o activate resume mode: When playback is ac ...

  • Lexicon RT-10 - page 108

    Playback Controls R T -10 4-15 P AUSE MODE • The front panel and remote control Pause button can be used to activate pause mode, which pauses playback at the current playback time. In some cases, activating pause mode creates a still frame image on the associated display device screen. Refer to the still frame playback description below for more ...

  • Lexicon RT-10 - page 109

    Playback Controls Lexicon 4-16 SLOW PLA YBACK • The remote control Pause,  , and  buttons can be used to activate slow playback, which plays the loaded disc at 1/16, 1/8, 1/4, or 1/2 regular playback speed in the selected direction. • Video CDs are not compatible with reverse slow playback. • Audio automatically mutes when slow playback ...

  • Lexicon RT-10 - page 110

    Playback Controls R T -10 4-17 • Press the Pause button or the opposite skip/scan button (i.e. the  button if for ward slow playback is activated) to pause playback at the current disc location. RANDOM PLA YBACK • The remote control RANDOM button can be used to activate random playback, which plays the loaded disc in a random order of titles ...

  • Lexicon RT-10 - page 111

    Playback Controls Lexicon 4-18 4. When random playback is in progress: • Press the remote control PREV button to return to the beginning of the currently playing title, chapter , group, or track. • Press the remote control NEXT button to skip to the beginning of the next randomly selected title, chapter , group, or track. For instance, when ran ...

  • Lexicon RT-10 - page 112

    Playback Controls R T -10 4-19 REPEA T PLA YBACK • The remote control REPEA T button can be used to activate repeat playback, which repeats playback of the currently playing title, chapter , group, track, folder , or program list. The table on page 4-12 indicates the repeat playback modes available for each disc format. • Repeat playback is not ...

  • Lexicon RT-10 - page 113

    Playback Controls Lexicon 4-20 4. When the desired repeat playback mode is selected, press the Play button or the remote control ENTER button to activate the selected repeat playback mode. • Select Repeat Off to deactivate repeat playback. (This option is only available if program playback was activated when the REPEA T button was pressed.) T o d ...

  • Lexicon RT-10 - page 114

    Playback Controls R T -10 4-21 A-B REPEA T PLA YBACK • The remote control A-B button can be used to activate A-B repeat playback from a user-defined start time (point A) to a user-defined end time (point B). A-B repeat playback can be configured to repeat playback of the user-defined playback loop once or continuously . • A-B repeat playback is ...

  • Lexicon RT-10 - page 115

    T o navigate Program tabs: Button Command Number Buttons Insert the corresponding value in the selected field. Refer to page 2-15 for instructions to enter values 10 and above. Note the following: • Program lists cannot contain values 100 and above or values that are not included on the loaded disc. For instance, a program title list cannot inclu ...

  • Lexicon RT-10 - page 116

    Requirements Storage Program Lists Disc Format(s) Playback Controls R T -10 4-23 DVD-V & DVD-RW/R DVD-A SACD, Audio CD, & CD-RW/R Video CD & SVCD MP3 One program title list per disc One program chapter list per title One program group list per disc One program track list per group One program track list per disc One program track list p ...

  • Lexicon RT-10 - page 117

    Playback Controls Lexicon 4-24 Note the following: • Program tabs automatically close a few seconds after the last command is received. If this occurs, all program list modifications that have not been previously stored will be deleted. • If the Program tab automatically closes when the Program Memory parameter is set to Off, all program list m ...

  • Lexicon RT-10 - page 118

    Playback Controls R T -10 4-25 Program T abs Current: Title 1(/1) –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– Program Memory –– Off Program Chapter Program Title Move Play Exit PROGRAM ENTER Current: Title 1 Chapter 1 Titl ...

  • Lexicon RT-10 - page 119

    Playback Controls Lexicon 4-26 • The currently playing title will be added to the end of the program title list when a program title list has been created for the loaded disc and a program chapter list has not been created for the currently playing title. Likewise, the currently playing group will be added to the end of the program group list whe ...

  • Lexicon RT-10 - page 120

    Playback Controls R T -10 4-27 T o delete stored DVD-V and DVD-RW/R program lists: 1. Load a DVD-V or DVD-RW/R for which a program list has been created. 2. When the desired disc is loaded, press the remote control PROGRAM button to open one of the Program tabs shown on page 4-25. 3. When a Program tab opens, press the remote control  and  ar ...

  • Lexicon RT-10 - page 121

    Playback Controls Lexicon 4-28 Search Modes Tit l e Activates playback of the first chapter in the selected title. Chapter Activates playback of the selected chapter in the currently playing title. Group Activates playback of the first track in the selected group. T rack • When a DVD-A is loaded, track search mode activates playback of the select ...

  • Lexicon RT-10 - page 122

    Playback Controls R T -10 4-29 Frame + Time Activates playback at the selected playback time (minutes:seconds) in the currently playing frame. This search mode is not available unless playback or pause mode is activated. Page Activates playback at the selected browsable picture on the loaded disc. This search mode is not available unless the loaded ...

  • Lexicon RT-10 - page 123

    Playback Controls Lexicon 4-30 Search Mode (continued from page 4-29) 5. When the desired search value is entered, press the Play button or the remote control ENTER button to activate playback at the selected playback time. • If a valid search value was entered, playback will activate at the selected title, chapter , group, track, folder , playba ...

  • Lexicon RT-10 - page 124

    T o open a display screen: 1. Make sure stop or resume mode is activated. 2. When stop or resume mode is activated, press the remote control DISPLA Y button to open one of the display screens shown above. The display screen descriptions on the previous page indicate the display screens available for each disc format. T o deactivate display mode: Pr ...

  • Lexicon RT-10 - page 125

    Playback Controls Lexicon 4-32 Display Bar A DVD-V No. Description 1 Indicates whether playback or pause mode is activated. 2 Indicates the numbers of the currently playing title and chapter . 3 Indicates the elapsed playback time of the currently playing title (minutes.seconds). 4 Indicates the display bar format. 5 Indicates the remaining and tot ...

  • Lexicon RT-10 - page 126

    Playback Controls R T -10 4-33 Display Bar C DVD-V No. Description 1 Indicates whether playback or pause mode is activated. 2 Indicates the numbers of the currently playing title and chapter . 3 Indicates the elapsed playback time of the currently playing title (minutes.seconds). 4 Indicates the display bar format. 5 Indicates the remaining and tot ...

  • Lexicon RT-10 - page 127

    Playback Controls Lexicon 4-34 Display Bar G DVD-A No. Description 1 Indicates whether playback or pause mode is activated. 2 Indicates the numbers of the currently playing group and track. 3 Indicates the elapsed playback time of the currently playing track. 4 Indicates the display bar format. 5 Indicates the current transmission rate. Display Bar ...

  • Lexicon RT-10 - page 128

    Playback Controls R T -10 4-35 Display Bar I SACD, CD, SVCD No. Description 1 Indicates whether playback or pause mode is activated. 2 Indicates the numbers of the currently playing track and the total number of tracks on the loaded disc. 3 Indicates the elapsed playback time of the currently playing track. 4 Indicates the display bar format. 5 Ind ...

  • Lexicon RT-10 - page 129

    Playback Controls Lexicon 4-36 T o deactivate display mode: Press the DISPLA Y button until the display bar closes. Display Bar M MP3 No. Description 1 Indicates whether playback or pause mode is activated. 2 Indicates the numbers of the currently playing folder and track. 3 Indicates the elapsed playback time of the currently playing track. 4 Indi ...

  • Lexicon RT-10 - page 130

    5 T r oubleshooting & Maintenance T roubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Power Issues • Remote Control Issues • Video Output Issues • Audio Output Issues • Playback Issues • Setup Menu Issues • Playback Control Issues • Miscellaneous Issues RT -10 Maintenance . . . ...

  • Lexicon RT-10 - page 131

    T roubleshooting & Maintenance Lexicon 5-2 TROUBLESHOOTING Incorrect operation is sometimes mistaken for malfunction. If problems occur , refer to this section for troubleshooting information or visit www .lexicon.com for additional troubleshooting information and answers to frequently asked questions. If problems persist, contact Lexicon Custo ...

  • Lexicon RT-10 - page 132

    T roubleshooting & Maintenance R T -10 5-3 The remote control number buttons cannot be used to enter values 10 and above. 1. In some cases, the remote control +10 button must be used to enter values 10 and above. Press the +10 button once for numbers in the teens, twice for numbers in the twenties, and so on. Then, press the desired number butt ...

  • Lexicon RT-10 - page 133

    T roubleshooting & Maintenance Lexicon 5-4 An icon appears on the on-screen display . 1. The icon shown at the right appears on the on-screen display when the RT -10 does not allow the selected command. 2. The icon shown at the right appears on the on-screen display when the loaded disc does not allow the selected command. 3. The icon shown at ...

  • Lexicon RT-10 - page 134

    T roubleshooting & Maintenance R T -10 5-5 3. Make sure all associated components are powered on and configured with the correct settings. In particular , make sure volume is set to an audible level. 4. Make sure the RT -10 has a digital and an analog audio output connection (2-13). Some disc formats, such as DVD-As and SACDs, do not generate d ...

  • Lexicon RT-10 - page 135

    T roubleshooting & Maintenance Lexicon 5-6 3. If a DVD is loaded, the disc might have a copy-protection signal (1-6) that prevents it from generating 96kHz signals. When a copy-protection signal is present, the RT -10 automatically downsamples signals to 48kHz before passing them to the associated component, even if the Linear PCM parameter (3- ...

  • Lexicon RT-10 - page 136

    T roubleshooting & Maintenance R T -10 5-7 RF interference is present in the audio output. 1. Make sure the RT -10 is not positioned near unshielded TV or FM antennas, cable TV decoders, and other RF emitting devices that might cause interference. Replace unshielded cables with shielded cables whenever possible. V olume level seems to differ be ...

  • Lexicon RT-10 - page 137

    T roubleshooting & Maintenance Lexicon 5-8 Playback automatically stops when an DVD-A is loaded. 1. The disc might have been illegally copied. The RT -10 does not allow playback of DVD-As that have been illegally copied. Playback activates for the selected SACD track, but the output format is incorrect. 1. Make sure the SACD Playback parameter ...

  • Lexicon RT-10 - page 138

    T roubleshooting & Maintenance R T -10 5-9 Some MP3 tracks appear to be missing from the loaded disc. 1. The RT -10 recognizes a maximum of 250 folders per disc and 250 tracks per folder . It ignores all folders and tracks that exceed this number . Playback does not begin from a bookmarked playback time on the loaded disc. 1. Playback might hav ...

  • Lexicon RT-10 - page 139

    T roubleshooting & Maintenance Lexicon 5-10 Speaker settings seem ineffective. 1. Certain speaker settings have no effect on some disc formats. For instance, speaker size settings (3-19) have no effect on DVD-As and speaker distance settings (3-20) have no effect on SACDs. 2. Make sure the RT -10 and all associated components are configured wit ...

  • Lexicon RT-10 - page 140

    T roubleshooting & Maintenance R T -10 5-11 2. Close the disc drawer . T est tones cannot be activated when the disc drawer is open. 3. Set the Analog Jacks prompt (3-5) or the Audio Out parameter (3-16) to 5.1 Channel. T est tones cannot be activated when these parameters are set to 5.1 Channel or None. 4. Set the Screen Saver parameter (3-28) ...

  • Lexicon RT-10 - page 141

    T roubleshooting & Maintenance Lexicon 5-12 PLA YBACK CONTROL ISSUES The disc menu (4-3) will not open. 1. Attempt to open the disc menu with the remote control MENU button and TOP MENU buttons. In some cases, pressing these buttons opens the same disc menu. In some cases, one specific button must be pressed to open the disc menu. For instance, ...

  • Lexicon RT-10 - page 142

    T roubleshooting & Maintenance R T -10 5-13 Preferred disc settings (4-10) are not recalled when a disc is loaded. 1. Make sure a DVD-V is loaded. Preferred disc settings cannot be stored (or recalled) for other disc formats. 2. The preferred disc settings might have been deleted. Preferred disc settings can be stored for up to 15 discs. The ol ...

  • Lexicon RT-10 - page 143

    T roubleshooting & Maintenance Lexicon 5-14 Program playback is in progress, and playback of a non-programmed chapter or track begins. 1. When playback of a program chapter or program track list is activated, playback of a non-programmed chapter or track might activate while the RT -10 sear ches for the next programmed chapter or track. Search ...

  • Lexicon RT-10 - page 144

    T roubleshooting & Maintenance R T -10 5-15 2. If the loaded disc was recorded in 24 frames-per-second progressive-scan format, the RT -10 misses one-in-six frames. Because of this, frame numbers appear discontinuous and the frame + time search mode might not find the selected frame. MISCELLANEOUS ISSUES The RT -10 is exhibiting erratic behavio ...

  • Lexicon RT-10 - page 145

    T roubleshooting & Maintenance Lexicon 5-16 RESTORING F ACTOR Y -DEFAUL T SETTINGS Restoring factory-default settings resets all Setup and Advanced Setup menu parameters to their factory-default setting and deletes all passwords, Setup menu shortcuts, bookmarks, preferred disc settings, and program lists. Before restoring factory-default settin ...

  • Lexicon RT-10 - page 146

    A Appendix Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3 Setup Menu Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4 T able of Languages & Langu ...

  • Lexicon RT-10 - page 147

    Video Output Connectors Audio Performance Audio Output Connectors Appendix Lexicon A-2 SPECIFICA TIONS Note the following: • The RT -10 is manufactured for sale in several different countries. Each version features a rear panel that includes connectors appropriate to that particular region. These specifications include all possible connectors. Ho ...

  • Lexicon RT-10 - page 148

    Other Video Performance Appendix R T -10 A-3 • 12-bit/108MHz D/A Conversion • 6MHz Bandwidth • 75dB (Y output) Signal-to-Noise Ratio •7 5 Ω Output Impedance • 1.0V peak-to-peak Output Level • 21-pin SCART connector A/V Euroconnector • 3.5mm Tip/Ring/Sleeve IR Input • 20W Power Consumption • 5 to 35˚C (41 to 95˚F) Operating T e ...

  • Lexicon RT-10 - page 149

    Appendix Lexicon A-4 SETUP MENU SCREENS Setup Navigator Screens 1 2 Language 4 5 Select the On Screen Language 7 Setup Navigator English francais Deutsch Italiano Espanol Audio1 Language General Video1 A2 V2 Move Select Exit OSD Language English ENTER SETUP ! 1 2 3 4 5 Setup using the Setup Navigator 7 Setup Navigator Start Auto Start Off Audio1 La ...

  • Lexicon RT-10 - page 150

    Appendix R T -10 A-5 Setup Menu Screens (Expert Mode) Setup Menu Screens (Basic Mode) Setup Menu Mode --- Expert Setup Navigator Parental Lock --- Off(us) Bonus Group Auto Disc Menu --- On Group Playback --- Single Audio1 Language General Video1 A2 V2 Move Exit SETUP OSD Language --- English Audio Language --- English Subtitle Language --- English ...

  • Lexicon RT-10 - page 151

    Appendix Lexicon A-6 Audio 1 & 2 T abs Audio DRC --- Off Dolby Digital Out --- Dolby Digital DTS Out --- DTS  PCM Linear PCM Out --- Down Sample On MPEG Out --- MPEG  PCM Digital Out --- On SACD Playback --- 2ch Area Audio1 Language General Video1 A2 V2 Move Exit SETUP Off On Audio DRC Audio DRC --- Off Dolby Digital Out --- Dolby Digital ...

  • Lexicon RT-10 - page 152

    Appendix R T -10 A-7 Speaker Setting Screens Gain Setting Screens Audio Out --- 2 Channel Speaker Setting Gain Setting --- Fix CD Digital Direct --- Off A1 Language General Video1 Audio2 V2 Move Select Exit SETUP Start Speaker Setting ENTER L/R --- Large C --- Large LS --- Large RS --- Large SW --- On Speaker Setting A1 Language General Video1 Audi ...

  • Lexicon RT-10 - page 153

    Appendix Lexicon A-8 Video 1 & 2 T abs TV Screen --- 16:9 (Wide) Component Video --- Progressive Video Out --- Video S-Video Out --- S2 Frame Search --- Off Screen Saver --- Off Audio1 Language General Video1 A2 V2 Move Exit SETUP 4:3 (Letter Box) 4:3 (Pan&Scan) 16:9 (Wide) 16:9 (Compressed) TV Screen TV Screen --- 16:9 (Wide) Component Vid ...

  • Lexicon RT-10 - page 154

    Appendix R T -10 A-9 Video Adjust Screens Background --- Gray Video Adjust Still Playback --- Auto On Screen Display --- On Angle Indicator --- On Audio1 Language General V1 A2 Video2 Move Select Exit SETUP ENTER Start Video Adjust Video Memory Select Video Adjust Video Setup Video Memory Select Video Adjust Video Memory Select TV(CRT) PDP Professi ...

  • Lexicon RT-10 - page 155

    Appendix Lexicon A-10 Language T ab OSD Language --- English Audio Language --- English Subtitle Language --- English Auto Language --- On DVD Language --- English Subtitle Display --- On Subtitle Off --- Selected Subtitle Audio1 Language General Video1 A2 V2 Move Exit SETUP English francais Deutsch Italiano Espanol OSD Language OSD Language --- En ...

  • Lexicon RT-10 - page 156

    Appendix R T -10 A-11 General T ab Setup Menu Mode --- Expert Setup Navigator Parental Lock --- Off(us) Bonus Group Auto Disc Menu --- On Group Playback --- Single Audio1 Language General Video1 A2 V2 Move Exit SETUP Expert Basic Setup Menu Mode Setup Menu Mode --- Expert Setup Navigator Parental Lock --- Off(us) Bonus Group Auto Disc Menu --- On G ...

  • Lexicon RT-10 - page 157

    Appendix Lexicon A-12 Parental Lock: Password Change Screens Parental Lock: Level Screens Setup Menu Mode --- Expert Setup Navigator Parental Lock --- Off(us) Bonus Group Auto Disc Menu --- On Group Playback --- Single Audio1 Language General Video1 A2 V2 Move Select Exit SETUP ENTER Password Level Country Code Parental Lock Password Change Parenta ...

  • Lexicon RT-10 - page 158

    Appendix R T -10 A-13 Bonus Group: Key Number Input – Audio1 Language General Video1 A2 V2 Move Exit +/– Return SETUP – – – Setup Menu Mode --- Expert Setup Navigator Parental Lock --- Off(us) Bonus Group Auto Disc Menu --- On Group Playback --- Single Audio1 Language General Video1 A2 V2 Move Select Exit SETUP ENTER Password Level Countr ...

  • Lexicon RT-10 - page 159

    Appendix Lexicon A-14 T ABLE OF LANGUAGES & LANGUAGE CODES Numeric Language Code Abb. English (Anglais) 0514 en French 0618 fr German 0405 de Italian 0920 it Japanese (Japonais) 1001 ja Spanish 0519 es Dutch 1412 nl Russian 1821 ru Chinese 2608 zh Korean 1115 ko Greek 0512 el Afar 0101 aa Abkhazian 0102 ab Afrikaans 0106 af Amharic 0113 am Arab ...

  • Lexicon RT-10 - page 160

    Appendix R T -10 A-15 Numeric Language Code Abb. Laothian 1215 lo Lithuanian 1220 lt Latvian 1222 lv Malagasy 1307 mg Maori 1309 mi Macedonian 1311 mk Malayalam 1312 ml Mongolian 1314 mn Moldavian 1315 mo Marathi 1318 mr Malay 1319 ms Maltese 1320 mt Burmese 1325 my Nauru 1401 na Nepali 1405 ne Norwegian 1415 no Occitan 1503 oc Oromo 1513 om Oriya ...

  • Lexicon RT-10 - page 161

    Appendix Lexicon A-16 T ABLE OF COUNTRY CODES Numeric Country Code Abb. Argentina 0118 ar Australia 0121 au Austria 0120 at Belgium 0205 be Brazil 0218 br Canada 0301 ca Chile 0312 cl China 0314 cn Denmark 0411 dk Finland 0609 fi France 0618 fr Germany 0405 de Numeric Country Code Abb. Hong Kong 0811 hk India 0914 in Indonesia 0904 id Italy 0920 it ...

  • Lexicon RT-10 - page 162

    Appendix R T -10 A-17 Speaker Setting & Gain Setting T est T one Output Level Speaker Distance Speaker Size Setup Navigator Setting Audio1 Setting Audio2 Setting INST ALLA TION WORKSHEET Setup Navigator OSD Language TV T ype Analog Jacks Center Speaker Surround Speakers Sub-woofer Digital Jack 96kHz PCM Audio Exit Setup Navigator Audio DRC Dolb ...

  • Lexicon RT-10 - page 163

    Appendix Lexicon A-18 General Setting Language Setting Video Adjust Setting Video2 Setting Background Video Adjust* Still Playback On Screen Display Angle Indicator * Refer to the next column for Video Adjust. * Refer to page A-17 for Setup Navigator . Video1 Setting TV Screen Component Video Video Out S-Video Out Frame Search Screen Saver PureCine ...

  • Lexicon RT-10 - page 164

    I-1 SYMBOLS  Arrow , 2-16, 3-2, 3-4, 3-9, 3-52, 4-6, 4-22  Arrow , 2-16, 3-2, 3-4, 3-9, 3-52, 4-6, 4-22  Arrow , 2-16, 3-2, 3-4, 3-9, 4-6, 4-22  , 2-5, 2-17, 4-16  , 2-17, 4-6, 4-18, 4-19, 4-21  /  , 2-5, 2-17  Arrow , 2-16, 3-2, 3-9, 4-6, 4-22 Button, 2-4, 2-16, 4-11 Indicator , 2-7  , 2-5, 2-17, 4-16  , 2-17, 4-6, 4- ...

  • Lexicon RT-10 - page 165

    I-2 C (continued) Channel Separation, A-2 Channels Indicator , 2-8 Character Display , 2-6 Indicator , 2-6 Chroma Delay Parameter , 3-31, 3-32 Level Parameter , 3-31, 3-32 Chrominance Noise Reduction (CNR) Parameter , 3-30, 3-31 CLEAR Button, 2-15, 4-5, 4-17, 4-19, 4-21, 4-22 CNR (Chrominance Noise Reduction) Parameter , 3-30, 3-31 Command Matrix D ...

  • Lexicon RT-10 - page 166

    I-3 F (continued) Front Panel Display , 2-3, 2-6 (ill.) to 2-8 (indicators) Illustration, 2-2 Overview , 2-2 to 2-5 Function Memory Mode, 2-18, 3-50, A-12 (tab) G Gain Setting Parameter , 3-21 to 3-24 Screens, A-7 (ills.) Gamma Parameter , 3-31, 3-32 General T ab, 3-41 to 3-49, A-11 (ills.) , A-12 (ills.) , A-13 (ills.) , A-14 (ills.) Group Playbac ...

  • Lexicon RT-10 - page 167

    I-4 P (continued) Product Registration, 1-3 Prog. Motion Parameter , 3-31, 3-34 Program Button, 2-16, 4-5, 4-17, 4-22, 4-23, 4-24, 4-25, 4-26, 4-27 Memory Parameter , 4-23, 4-24, 4-25, Mode, 2-16, 4-12, 4-22 to 4-28 Indicator , 2-7 Progressive-Scan Component Video Output, 2-7, 2-10, 2-12, 3-27 Pure Cinema Parameter , 3-30, 3-31 R Rack Mounting, A-3 ...

  • Lexicon RT-10 - page 168

    I-5 S (continued) Sub-woofer Prompt, 3-3, 3-7 Surround Speakers Prompt, 3-3, 3-6 SW Parameter , 3-18, 3-22 T T able of Contents, iv to v THD + Noise, A-2 T est T ones, Activating, 3-22, 3-23 Indicator , 2-6 Indicator , 2-7 TOP MENU Button, 2-16, 4-5 T rigger Input Connector , 2-11 Control, 2-11 Input Switch, 2-10 to 2-11 Indicator , 2-7 T roublesho ...

  • Lexicon RT-10 - page 169

    Notes ...

  • Lexicon RT-10 - page 170

    Notes ...

  • Lexicon RT-10 - page 171

    Lexicon, Inc. 3 Oak P ark Bedford, MA 01730-1413 USA T el 781-280-0300 F ax 781-280-0490 www .lexicon.com Customer Support T el 781-280-0300 F ax 781-280-0495 (Sales) F ax 781-280-0499 (Ser vice) LIMITED W ARRANTY Lexicon, Inc. offers the f ollowing warranty on this product: What is the Duration of this W arranty? This warranty will remain in eff e ...

  • Lexicon RT-10 - page 172

    Lexicon, Inc. 3 Oak Park Bedford, MA 01730-1413 USA T el 781-280-0300 F ax 781-280-0490 www .lexicon.com Customer Support T el 781-280-0300 F ax 781-280-0495 (Sales) F ax 781-280-0499 (Ser vice) Lexicon P ar t No. 070-15658 | Rev 0 | 01/03 ...

Manufacturer Lexicon Category CD Player

Documents that we receive from a manufacturer of a Lexicon RT-10 can be divided into several groups. They are, among others:
- Lexicon technical drawings
- RT-10 manuals
- Lexicon product data sheets
- information booklets
- or energy labels Lexicon RT-10
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lexicon RT-10.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lexicon RT-10, service manual, brief instructions and user manuals Lexicon RT-10. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lexicon RT-10.

Similar manuals

A complete manual for the device Lexicon RT-10, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lexicon RT-10 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lexicon RT-10.

A complete Lexicon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lexicon RT-10 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lexicon RT-10, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lexicon RT-10, that we can find in the current document
3. Tips how to use the basic functions of the device Lexicon RT-10 - which should help us in our first steps of using Lexicon RT-10
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lexicon RT-10
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lexicon RT-10 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lexicon RT-10?

Use the form below

If you did not solve your problem by using a manual Lexicon RT-10, ask a question using the form below. If a user had a similar problem with Lexicon RT-10 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)