English dropdown-ico

Manual Hitachi CMP5000WXU

40 pages 1.57 mb
Download

Go to site of 40

Summary
  • Hitachi CMP5000WXU - page 1

    USER'S MANU AL MANUEL UTILISA TEUR READ THE INSTR UCTIONS INSIDE CAREFULL Y . KEEP THIS USER MANU AL FOR FUTURE REFERENCE. F or future ref erence, record the serial number of your monitor . SERIAL NO . The serial number is located on the rear of the monitor . Color Plasma Displa y Monitor Model CMP5000WXU CMP5000WXJ Contents related to system ...

  • Hitachi CMP5000WXU - page 2

    English This unit has been designed for use as a computer display monitor . The optional video card is required if you wish to view other video signals on the monitor . For details consult your local retail dealer . Français Cet appareil est conçu pour une utilisation comme moniteur d’affichage d’ordinateur . La carte vidéo optionnelle est n ...

  • Hitachi CMP5000WXU - page 3

    I En Safety Guidelines English SAFETY GUIDELINES This monitor is designed to be safe to use. However, fire or serious injury may occur unles s you use this monitor in the proper way. Please follow the instructions shown below in order to avoid injury. Keep the safety guideline Do not use the monitor if it fails If you find something unusual , * If ...

  • Hitachi CMP5000WXU - page 4

    II En English Safety Guidelines SAFETY GUIDELINES(continued) Fire or electric shock may cause death or serious injury unless you follow the instruction. W ARNING • The enclosed power cord must be used! Failure to do so may cause electric shock hazard or fire hazard. In USA/Canada, use a UL LISTED/CSA LABELLED or CERTIFIED power cord set meeting t ...

  • Hitachi CMP5000WXU - page 5

    III En Safety Guidelines English • Installation environment Do not obstruct a ventilation hole. Do not put the monitor on carpet or blanket, or near a curtain which has a possibility of obstructing a ventilation hole of the monitor. Do not put the monitor in the following places. • Hot places such as near heater, place exposed to the direct ray ...

  • Hitachi CMP5000WXU - page 6

    IV En English Safety Guidelines • FCC (Federal Communications Commission) STATEMENT WARNING For model CMP5000WXU (Plasma Display) CMPAV05 (Video Card) WARNING : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable prot ...

  • Hitachi CMP5000WXU - page 7

    i En English USER’S MANU AL Thank you very much for purchasing the HIT ACHI Plasma Display Monitor . Before using your monitor , please carefully read the “SAFETY GUIDELINES” and this “USER’S MANUAL” so you will know how to operate the monitor properly . Keep this manual in a safe place. Y ou will find it useful in the future. Notes on ...

  • Hitachi CMP5000WXU - page 8

    ii En English NO TE: The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this manual. TRADEMARK A CKNO WLEDGEMENT VGA and XGA are registered trademarks of International Business Machines Corporation. APPLE and Macintosh are registered trademarks of Apple Co ...

  • Hitachi CMP5000WXU - page 9

    1 En English Before Proceeding Contents SAFETY GUIDELINES .................................................. I Before Proceeding ...................................................... 2 How to Use This Manual .............................................................. 2 Checking Supplied Accessories .............................................. ...

  • Hitachi CMP5000WXU - page 10

    2 En English Before Proceeding 1 Press MENU to display the menu screen. MAIN MENU INPUT1 SELECT ENTER EXIT SET MENU PICTURE SCREEN SET UP OPTION : 0 : 6 + + + 0 : 60 : 60 : 0 : 0 CONT RA S T : 0 BR RL E V E L IG H T . . GL E V E L . BL E V E L . H E NH ANCE . V E NH ANCE . RS E T E 2 Press 3 to select SCREEN. SELECT ENTER EXIT SET MENU PICTURE SCRE ...

  • Hitachi CMP5000WXU - page 11

    3 En English Before Proceeding Checking Supplied Accessories Check that the following accessories were supplied. 1 Power cord 2 Remote control unit 3 AA (R6) batteries (x 2) 4 Speed clamps (x 2) 5 Bead bands (x 2) Before Proceeding ÷ USER’S MANUAL ...

  • Hitachi CMP5000WXU - page 12

    4 En Part Names and Functions English Part Names and Functions Main Unit Main unit 1 Remote control sensor Point the remote control toward the remote sensor to operate the unit (page 6). 2 ST ANDBY/ON indicator This indicator is red during standby mode, and turns to green when the unit is in the operation mode (page 16). Flashes green when Power -M ...

  • Hitachi CMP5000WXU - page 13

    5 En Part Names and Functions English 8 9 7 0 - 2 3 4 5 6 1 Remote Control Unit 1 SCREEN SIZE button Press to select the screen size (page 18). 2 INPUT buttons Use to select the input (page 16). 3 MENU button Press to open and close the on-screen menu (pages 14 to 26). 4 ADJUST ( 5 / ∞ / 3 / 2 ) buttons Use to navigate menu screens and to adjust ...

  • Hitachi CMP5000WXU - page 14

    6 En Part Names and Functions English Part Names and Functions Connection Panel The connection panel is provided with two video input jacks and one video output jack. Audio input and speaker output jacks are also provided. For instructions regarding connections, consult the pages noted in parentheses by each item. 1 SPEAKER (R) terminal For connect ...

  • Hitachi CMP5000WXU - page 15

    7 En Part Names and Functions English Part Names and Functions 8 Synchronizing signal impedance selector switch Depending on the connections made at INPUT2, it may be necessary to set this switch to match the output impedance of the connected component’ s synchronization signal. When the output impedance of the component’ s synchronization sign ...

  • Hitachi CMP5000WXU - page 16

    8 En English Installation and Connections Installation and Connections Installation of the Unit Installation using the optional HIT ACHI stand or installation bracket ÷ Please be sure to request installation or mounting of this unit or the installation bracket by an installation specialist or the dealer where purchased. ÷ When installing, be sure ...

  • Hitachi CMP5000WXU - page 17

    9 En Installation and Connections English Installation and Connections Connection to INPUT1 and INPUT2 The INPUT 1 and INPUT 2 jacks are used to connect the display to a computer . After making the connections, adjust the screen settings in accordance with the computer’ s signal output. See pages 14-15 for information regarding settings. Note Com ...

  • Hitachi CMP5000WXU - page 18

    10 En English Installation and Connections Installation and Connections When connecting to INPUT1 ANALOG RGB (ANALOG RGB) INPUT1 OUTPUT Connect the cable corresponding to the shape of the input terminal on this unit and the personal computer ’ s output terminal. Secure by tightening the terminal screws on both units. After connecting, on-screen s ...

  • Hitachi CMP5000WXU - page 19

    11 En Installation and Connections English Installation and Connections Connection of composite SYNC analog RGB source Make composite SYNC connections for a personal computer with output that has the vertical synchronization signal layered on top of the horizontal synchronization signal. When connecting to INPUT1 ANALOG RGB (ANALOG RGB) INPUT1 OUTP ...

  • Hitachi CMP5000WXU - page 20

    12 En English Installation and Connections Power Cord Connection Connect the power cord after all component connections have been completed. 1 Connect the power cord to this unit. 2 Plug the power cord into a power outlet. CAUTION ÷ Use only the power cord provided. ÷ Do not use a power supply voltage other than that indicated (AC 100 - 120 V , 5 ...

  • Hitachi CMP5000WXU - page 21

    13 En Installation and Connections English How to Route Cables Speed clamps and bead bands are included with this unit for bunching cables together . Once components are connected, follow the following steps to route cables. 1 Organize cables together using the provided speed clamps. Insert 1 into an appropriate hole on the rear of the unit, then s ...

  • Hitachi CMP5000WXU - page 22

    14 En English Setting Up the System Setting Up the System 6 Press 5 / ∞ to select SETTING, then press SET . SELECT ENTER EXIT SET MENU PICTURE SCREEN SET UP OPTION : N T : A UT O SET T I N CL AM P POWE R : G O FF PS I T I O N O MN A G E M E A IN P U T IN P U T 1 L E B LA : V GA MAIN MENU INPUT1 7 Press 2 / 3 to select the display mode. SELECT SET ...

  • Hitachi CMP5000WXU - page 23

    15 En Setting Up the System English Setting Up the System CLAMP POSITION setup Depending on the signal, analog RGB signals may result in the screen image appearing with a whitish or greenish cast. In such cases, set “CLAMP POSITION” to LOCKED. ÷ Normally , leave this setting at AUTO. Setup of CLAMP POSITION 1 Press MENU to display the menu scr ...

  • Hitachi CMP5000WXU - page 24

    16 En English Operations Selecting an Input Source This section explains the basic operation of this unit. Outlined on the following pages is how to turn the main power on and off, put this unit in the operation or standby mode and how to select connected components. Before you begin, make sure you have: • Made connections between this unit and p ...

  • Hitachi CMP5000WXU - page 25

    17 En Operations English Operations T o adjust the volume VOLUME +/ – Press VOLUME on the remote control unit. Use VOLUME + or VOLUME – to adjust the volume of the connected speakers. : 5 VO L UM E T o mute the sound MUTING Press MUTING on the remote control unit. Press MUTING again to restore the sound. Muting is automatically canceled about 8 ...

  • Hitachi CMP5000WXU - page 26

    18 En English Operations 2 4:3 The display fills the screen as much as possible without altering the aspect ratio of the input signal. A 3 FULL The display is presented with a widescreen aspect ratio of 16:9 and fills the entire screen. A 4 P ARTIAL The P ARTIAL setting is available only during personal computer input (1280 x 1024/60 Hz only). The ...

  • Hitachi CMP5000WXU - page 27

    19 En Operations English Operations Partial Image Enlargement (POINT ZOOM) This display allows any one of nine screen areas (AREA 1 to AREA 9) to be selected and enlarged to x1.5, x2, x3, or x4. When performing point zoom enlargement, the direction buttons ( 5 / ∞ / 2 / 3 ) can be used to move the enlarged portion up-down and right-left. 1 Press ...

  • Hitachi CMP5000WXU - page 28

    20 En English Operations 3 OFF ON 2 Automatic Power OFF This display is equipped with automatic power - management and auto-power -off functions, which allow the unit to automatically switch to power -saving mode when no sync signal is detected. (A warning message appears onscreen before these functions operate.) Notes ÷ The Power Management funct ...

  • Hitachi CMP5000WXU - page 29

    21 En Display Panel Adjustments English Display Panel Adjustments Adjusting the Picture Quality 1 Press MENU to display the menu screen. MAIN MENU INPUT1 SELECT ENTER EXIT SET MENU PICTURE SCREEN SET UP OPTION : 0 : 6 + + + 0 : 60 : 60 : 0 : 0 CONT RA S T : 0 BR RL E V E L IG H T . . GL E V E L . BL E V E L . H E NH ANCE . V E NH ANCE . RS E T E 2 ...

  • Hitachi CMP5000WXU - page 30

    22 En Display Panel Adjustments English Display Panel Adjustments Adjusting the Image Position and Clock (Automatic Adjustment) Pressing AUTO SET UP on either the main unit or the remote control unit will adjust the screen position and clock to optimum values. Note Perform this adjustment individually for each input function (INPUT 1, INPUT 2), and ...

  • Hitachi CMP5000WXU - page 31

    23 En Display Panel Adjustments English Manual Adjustment of Screen Position and Clock 1 Press MENU to display the menu screen. MAIN MENU INPUT1 SELECT ENTER EXIT SET MENU PICTURE SCREEN SET UP OPTION : 0 : 6 + + + 0 : 60 : 60 : 0 : 0 CONT RA S T : 0 BR RL E V E L IG H T . . GL E V E L . BL E V E L . H E NH ANCE . V E NH ANCE . RS E T E 2 Press 2 / ...

  • Hitachi CMP5000WXU - page 32

    24 En Other Operations English Other Operations Rewriting the Input Display (INPUT LABEL) This function allows rewriting of the screen contents displayed with differing inputs. For example, the default “INPUT 1” can be changed to “COMPUTER” or other name describing the connected component (up to maximum of 8 characters). Example: T o rewrit ...

  • Hitachi CMP5000WXU - page 33

    25 En Other Operations English Other Operations Power Control Function The power control function allows screen brightness to be suppressed as a means of lowering power consumption and reducing display deterioration. 1 Press MENU to display the menu screen. The menu will be displayed. MAIN MENU INPUT1 SELECT ENTER EXIT SET MENU PICTURE SCREEN SET U ...

  • Hitachi CMP5000WXU - page 34

    26 En Other Operations English 4 Press SET to select INPUT 1. The factory default setting is OFF . Each time SET is pressed the selector function switches alternately as shown: ÷ When OFF is selected, AUTO FUNCTION is disabled. ÷ When INPUT 1 is selected, the display input automatically switches to INPUT 1 when a signal is detected at the INPUT 1 ...

  • Hitachi CMP5000WXU - page 35

    Additional Information 27 En English Additional Information Cleaning Regular cleaning will extend the life and performance of this unit. The recommended way to clean the display and related parts is described below . Before cleaning, be sure to unplug the power cord from the power outlet. Cleaning the display panel body and remote control Do not un ...

  • Hitachi CMP5000WXU - page 36

    28 En English Additional Information General problems • No power • Unit cannot be operated. • Remote control does not operate. • INPUT is not changed. • Picture is cut off. • Strange color , light color , or dark, or color misalignment • Power is suddenly turned off. • No picture • Is the power cord disconnected? (page 12) • Has ...

  • Hitachi CMP5000WXU - page 37

    Additional Information 29 En English Although this unit incorporates high precision technology in its design, please understand that there may be extremely slight pixel breakup, or light emission fault. Note In order to protect the panel and internal circuitry , this display is provided with a cooling fan designed to turn on/off and change speed au ...

  • Hitachi CMP5000WXU - page 38

    30 En English Additional Information Specifications General Light emission panel ............ 50 inch plasma display panel Number of pixels .............................................. 1280 x 768 Power supply ............................. AC 100 - 120 V , 50/60 Hz Rated current .................................................. 3.8 A - 3.1A Stand ...

  • Hitachi CMP5000WXU - page 39

    Additional Information 31 En English 56.4Hz 70.1Hz 60Hz 66.7Hz 72Hz 75Hz 85Hz 56Hz 60Hz 72Hz 75Hz 85Hz 74.6Hz 60Hz 60Hz 70Hz 75Hz (74.9Hz) 85Hz 60Hz 72Hz 75Hz 75.1Hz 66.0Hz 76.0Hz 56Hz 60Hz 70Hz 60Hz 60Hz 75Hz 85Hz 60Hz 65Hz 70Hz 75Hz 85Hz Additional Information Supplement 1 Resolution (Dot x Line) V ertical DOT BY DOT FULL P ARTIAL Remarks 640x400 ...

  • Hitachi CMP5000WXU - page 40

    32 En English Additional Information Additional Information Explanation of T erms Aspect ratio The TV screen ’ s width to height ratio is referred to as its aspect ratio. The aspect ratio on standard TVs is 4:3 and on wide TVs or High Definition TVs it is 16:9. G ON SYNC This indicates a video signal in the form of a synchronization signal added ...

Manufacturer Hitachi Category Computer Monitor

Documents that we receive from a manufacturer of a Hitachi CMP5000WXU can be divided into several groups. They are, among others:
- Hitachi technical drawings
- CMP5000WXU manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi CMP5000WXU
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi CMP5000WXU.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi CMP5000WXU, service manual, brief instructions and user manuals Hitachi CMP5000WXU. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi CMP5000WXU.

Similar manuals

A complete manual for the device Hitachi CMP5000WXU, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi CMP5000WXU by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi CMP5000WXU.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi CMP5000WXU - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi CMP5000WXU, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi CMP5000WXU, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi CMP5000WXU - which should help us in our first steps of using Hitachi CMP5000WXU
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi CMP5000WXU
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi CMP5000WXU in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi CMP5000WXU?

Use the form below

If you did not solve your problem by using a manual Hitachi CMP5000WXU, ask a question using the form below. If a user had a similar problem with Hitachi CMP5000WXU it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)