-
Onkyo HT-S5300 - page 1
7.1ch Home Theater System HT-S5300 A V Receiver (HT -R580) Speaker P ackage (HTP-580) Front Speak ers (SKF-580 L/R) Center Speaker (SKC-580) Surround Speak ers (SKR-580 L/R) Surround Back Speak ers (SKB-580 L/R) Subw oofer (SKW -580) Univ ersal Port Option Dock f o r iPod ® (UP- A1) Instruction Manual Thank you for purchasing an Onkyo 7.1ch Home T ...
-
Onkyo HT-S5300 - page 2
2 En Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instructi ons. 3. Heed all warnings. 4. Follo w all instructi ons. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventilat ion openings. Install in accordance with the manuf acturer’ s instructions. 8. Do not install near ...
-
Onkyo HT-S5300 - page 3
3 En Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copyrighted ma terial is ille gal without the permission of the copyright holder . 2. A C Fuse —The AC fuse inside the unit is no t user-ser- viceable. If you cannot turn on the unit, contact your Onkyo de aler . 3. Care —Occasionally you should dust th ...
-
Onkyo HT-S5300 - page 4
4 En Speaker Precautions Placement • The subwoofer cabinet is ma de out of wood and is there- fore sensiti ve to e xtreme temperatures and humidity , do not put it in locations subjec t to direct sunlight or in humid places, such as near an air con ditioner , humidifier , bathroom, or kitchen. • Do not put water or other liquids close to the sp ...
-
Onkyo HT-S5300 - page 5
5 En Installing the Batte ries Note • If the remote controller doesn’ t work reliably , try replacing the batteries. • Don’t mix new and old batteries or diff erent types of batteries. • If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from leak- age or corrosion. • Remove e xpired b ...
-
Onkyo HT-S5300 - page 6
6 En Features A V Receiver HT-R580 • 130 W atts/Channel @ 6 ohms • 160 W a tts/Channel @ 6 ohms (JEIT A) • WRA T–W ide Range Am plifier T echnology (5 Hz to 100 kHz bandwidth) • Optimum Gain V olume Circuitry • H.C.P .S. (High Current Po wer Supply) Massi ve High Po wer T ransformer • HDMI (V er .1.4 with Audio Re turn Channel, 3D), D ...
-
Onkyo HT-S5300 - page 7
7 En Fr ont & Rear P anels North American models Asian models The actual front panel has v a ri ous logos printed on it. The y are not sho wn here for clarity . The page numbers in pa rentheses show where you can fi nd th e main explanation for each item. a ON/ST AN DBY button ( ➔ 21 ) b ST ANDBY indicator ( ➔ 21 ) c HDMI THRU indicator ( ? ...
-
Onkyo HT-S5300 - page 8
8 En For detailed information, se e th e pages in parentheses. a A udio input indicators b Listening mode and format indicators ( ➔ 22 , 28 ) c A udyssey in dicators ( ➔ 37 ) d T uning indicators ( ➔ 24 ) e RDS indicator (excluding North Amer ican models) ( ➔ 25 ) f SLEEP indicator ( ➔ 23 ) g MUTING indicator ( ➔ 23 ) h Message area a D ...
-
Onkyo HT-S5300 - page 9
9 En Speaker P ac k age For detailed information, se e the pages in parentheses. ■ Fron t a ST ANDBY/ON indicator W ith the Auto Standby function, the SKW -580 auto- matically turns on when an inp ut signal is detecte d in Standby mode. When there’ s no input signal for a while, the SKW -580 automa tically enters Standb y mode. b OUTPUT LEVEL c ...
-
Onkyo HT-S5300 - page 10
10 En Remote Contr oller For detail ed information, se e the pages in parentheses. a ON/ST ANDBY button ( ➔ 21 ) b REMO TE MODE / INPUT SELECT OR buttons ( ➔ 22 ) c SP LA Y OUT button ( ➔ 23 ) d Arrow q / w / e / r and ENTER buttons e SETUP button ( ➔ 33 ) f LISTENING MODE buttons ( ➔ 28 ) g DIMMER button ( ➔ 22 ) h DISPLA Y button ( ? ...
-
Onkyo HT-S5300 - page 11
11 En About Home Theater Thanks to the A V recei ver’ s superb capabilities, you can enjoy surround sound with a real sense of movement in your ow n home—just like being in a movie thea ter or concert hall. W ith Blu-ray Discs, you can enjo y DTS and Dolb y Digital. W ith analog or digital TV , you can enjoy Dolb y Pro Logic IIx , DTS Neo:6, or ...
-
Onkyo HT-S5300 - page 12
12 En Connecting the A V Receiver Speaker Configurat ion The follo wing table indicate s the channels you should use depending on the number of speakers that you hav e. For 7.1-channel surround-sound playback, you need se ven speakers and a po wered subwoofer . *1 If you’re using only one surr o und back speaker , connect it to the SURR BA CK OR ...
-
Onkyo HT-S5300 - page 13
13 En Connecting the Sp eaker Cables Screw-type speaker termi nals Using Banana Plu gs (Nor th American models) • If you are using banana plugs, tighten the speak er terminal before inserting the banana plug. • Do not insert the speaker code directly in to the center hole of the speaker terminal. Push-type speaker terminals The follow ing illus ...
-
Onkyo HT-S5300 - page 14
14 En The speakers can easily be wa ll mounted b y using the ke y- hole slots. T o preven t the speaker from vibrating against the wall, attach tw o of the supplied thick rubber stoppers to the rear of each speaker . T o mount the front, surround and surround back speak ers vertically , use the keyhole slot sho wn to hang each speaker on a screw th ...
-
Onkyo HT-S5300 - page 15
15 En Connected ima ge with A V components • Before making any A V connections, read th e manuals supplied with your A V components. • Don’t connect the po wer cord until you’ ve comp leted and double-check ed all A V connections. • Push plugs in all the way to mak e good connecti ons (loose connecti ons can cause noise or malfunc- tions) ...
-
Onkyo HT-S5300 - page 16
16 En Connect your components to the appropr iate jack s. The default input assi gnments are shown belo w . ✔ : Assignment can be changed ( ➔ 34 ). Refer to “ About HDMI” ( ➔ 60 ) and “Using an RIHD-compatible TV , Player, or Record er” ( ➔ 61 ). Tip T o listen to audio recei ved b y the HDMI IN jacks through your TV’ s speakers: ...
-
Onkyo HT-S5300 - page 17
17 En Connect your components to the appropriate jacks. The default input assignments are sho wn below . ✔ : Assignment can be changed ( ➔ 34 ). *1 Connect a turntable (MM) that has a pho no preamp built- in. If you r turntable (MM) doesn’t ha ve it, you’ll need a commercially av ailable phono preamp. If your turntable has a moving coil (MC ...
-
Onkyo HT-S5300 - page 18
18 En Note • When you connect to both A UX INPUT A UDIO jacks and A UX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack will be giv en a higher priority . • The A V receiv er can output audio and video signals f rom the AU X I N P U T jacks to the VCR/D VR OUT jacks. W ith u (Remote Interactiv e), you can use the follo wing special f ...
-
Onkyo HT-S5300 - page 19
19 En This section explains ho w to connect the supplied indoor FM antenna and AM loop antenna. The A V receiver won’ t pick up any radi o signals without any antenn a connected, so you must co nnect the antenna to use the tuner . Cautio n • Be careful that you don’t injure yourself when using thumbtacks. Note • Once your A V re ceiv er is ...
-
Onkyo HT-S5300 - page 20
20 En The A V receiver supports se vera l connection formats for compat ibility with a wide range of A V equipment. The format you choose will depend on the formats supported by your co mponents. Use the followi ng sections as a guide. Note The on-screen setup menus are displayed when: • There is no video input, or • The video input is 480p, 57 ...
-
Onkyo HT-S5300 - page 21
21 En T urning On/Off the A V Receiver Tu r n i n g O n Pre ss ON/ST AN DBY on the front panel. or Pre ss RECEIVER f ollowed by ON/ST ANDBY on the remote contr oller . The A V recei ver comes on, the display lights, and the ST ANDBY indi cator goe s off. Tu r n i n g O f f Pre ss ON/ST AN DBY on the front panel or the r emote controller . The A V r ...
-
Onkyo HT-S5300 - page 22
22 En Basic Operations ■ Operating on the A V receiv er ■ Operating with the remote contro ller Note • When the subwoofer volume le vel is set to a positiv e (+) value, the maximum master volume lev el is reduced proportionally . T o set the level of the subwoofer , use the OUTPUT LEVEL control. Because our ears are less se nsitive to v ery l ...
-
Onkyo HT-S5300 - page 23
23 En Y ou can temporarily mute the output of the A V receiver. Tip • T o unmute, press MUTING again or adjust the volume. • The Mute function is cancelled when the A V receiver is set to Standby . W ith the sleep timer, yo u can set the A V receiv er to turn off au tomatically after a specified pe riod. Tip • If you need to cancel the sleep ...
-
Onkyo HT-S5300 - page 24
24 En Listening to the Radio W ith the built-in tuner you can enjoy AM and FM radio stations. Y ou can store your fa vo rite stations as presets for quick selection. This model changes FM/AM frequenc y in 200/10kHz (or 50/9kHz) steps. In manual tuning mode, FM st ations will be in mono. Listening to the Radio T uning into Radio Stations ■ A uto t ...
-
Onkyo HT-S5300 - page 25
25 En Y ou can store a combination of up to 40 of your fav orite FM/AM radio stations as presets. Selecting Pre sets Tip • Y ou can also use the remote controller’ s number buttons to select a preset directly . Deleting Presets When tuned into an RDS station, the RDS indicator lights. What is RDS? RDS stands for Radio Data System and is a metho ...
-
Onkyo HT-S5300 - page 26
26 En Display ing Radio T ext (RT) Note •T h e m e s s a g e “ Wa i t i n g ” may a ppear while the A V receiver waits for the R T information. • If the message “ No T ext Data ” appears on the display , no R T information is av ailable. Finding Stations by T ype (PTY) Y ou can search for radio stations by type. Listening to T raffic Ne ...
-
Onkyo HT-S5300 - page 27
27 En Recor ding This section explains ho w to record the selected input source to a component with recording capa bility , and ho w to record audio and video from different sources. Connecting a Recor ding Component Note • The A V receiver must be turned on for recording. Recording is not possible while it’ s in Standby mode. • If you want t ...
-
Onkyo HT-S5300 - page 28
28 En Using the Listening Modes See “ About Listening Modes” for detailed information about the listening modes ( ➔ 29 ). Listening Mode Buttons MO VIE/TV button This butto n selects the listening modes intended for use with movies and TV . MUSIC button This butto n selects the listening modes intended for use with music. GAME button This but ...
-
Onkyo HT-S5300 - page 29
29 En The A V receive r’ s listening modes can tr ansform your listening room into a mo vie theater or concert ha ll, with high fidel- ity and stunning surround sound. Explanatory Notes ■ Input Source The follow ing audio formats are supported by the listening mode. ■ Speaker Lay out The illustration sho ws which speakers are acti vat ed in e ...
-
Onkyo HT-S5300 - page 30
30 En Listening Modes Listening Mode Description Input Source Speaker Lay out Direct In this mode, audio from the input source is output withou t surround-sound processing. T he “ Sp Config ” (presence of speakers), “ Sp Distance ” and “ A/V Sync ” settings are enabled, but much of the processing set via A UDIO is disabled. See “ Adva ...
-
Onkyo HT-S5300 - page 31
31 En Dolby Digital In th is mode, audio f rom the input source is output without sur round-sound processing. “ Sp Conf ig ” (presence of speakers), “ Crossover ”, “ Sp Dis- tance ”, “ A/V Sync ” and much of the processing set via AU D I O are enabled. See “ Advanced Setup” for more details ( ➔ 33 ). D XCN Dolby Digital Plus * ...
-
Onkyo HT-S5300 - page 32
32 En Onky o-Original DSP Listening Modes Note *1 When the input source contain s the encoded front hi gh channel, front high speakers outp ut the sound. *2 If there are no surr ound back speakers, or Powered Z one 2 is being used, Dolby Pro Logic I I is used. *3 Surround back speakers are no t supported. *4 Front high speakers are no t supported. ...
-
Onkyo HT-S5300 - page 33
33 En Ad v anced Setup Note The on-screen setup menus are displayed when: • There is no video input, or • The video input is 480p, 576p, 72 0p, 1080i, or 1080p. The on-screen setup menus a ppear on the connected TV and provide a con venient way to change the A V receiver’ s various settings. Set tings are org anized into ten categories on the ...
-
Onkyo HT-S5300 - page 34
34 En Explanatory No tes Menu HDMI Inpu t If you connect a video component to an HDMI input, you must assign that input to an i nput selector . For e xample, if you connect your Blu-ray Disc/D VD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/D VD ” input selector . Here are the defau lt assignments. ■ BD/D VD , VCR/D VR , CB ...
-
Onkyo HT-S5300 - page 35
35 En Note •W h e n a n HDMI IN is assigned to an input selector in “HDMI Input” ( ➔ 34 ), this input assignment is automatically set to the same HDMI IN . And in addition to the usual inputs (e.g., CO AX1 , COAX2 , etc.), you can also select HDMI inputs. • A vailable sampling rate for PCM signals from a digital input (optical and coaxial ...
-
Onkyo HT-S5300 - page 36
36 En Menu Sp Distance Here you can specify the distan ce from each speaker to the listening position so that the sound from each speaker arriv es at the listener’ s ears as the sound designer intended. ■ Unit ` feet : Distances ca n be set in feet. Range: 1ft to 30ft in 1 foot steps. ` meters : Distances can be set in m eters. Range: 0.3m to 9 ...
-
Onkyo HT-S5300 - page 37
37 En ■ Dimensi on ` –3 to 0 to +3 W ith this setting, you can move the sound f ield forward or backward when using the Dolb y Pro Logic IIx Music listening mode. Higher sett ings mo ve the sound f ield backward. Lo wer settings move it f orward. If the stereo image feels too wide, or there’ s too much surround sound, mo ve the sound f ield f ...
-
Onkyo HT-S5300 - page 38
38 En ■ Reference Level A udyssey Dy namic EQ™ Reference Lev el Offset ` 0d B : It should be used when listening to movies. ` 5d B : Select this setting for cont ent that has a v ery wide dynamic range, such as classica l music. ` 10 dB : Select this setting for jazz or other music that has a wider dynamic range. This setting should also be sel ...
-
Onkyo HT-S5300 - page 39
39 En Menu Name Edit Y ou can enter a preset name for each indi vidual input selector for easy identification. When entered, the preset name will app ear on the display . ■ Name ` --- , Blu-ray , DV D , HD D VD , VCR , DV R , Tivo , CableSTB , SA T STB , PS3 , Wii , Xbox , PC , TV , CD , TA P E , iPod : T o reset to the default, select “ --- ? ...
-
Onkyo HT-S5300 - page 40
40 En Menu HDMI Set up ■ A udio TV OUT ` Off : HDMI audio is not output. ` On : HDMI audio is output. This preference dete rmines whether audio received at the HDMI IN is output by the HDMI OUT . Y ou may want to turn this preference on if your TV is connected to the HDMI OUT and you want to listen to the audio from a component that’ s connecte ...
-
Onkyo HT-S5300 - page 41
41 En Note •T h e “ Po wer Control ” setting can be set on ly when the above “ HDMI Control ” setting is set to “ On ”. • HDMI power control only works with p -compatible components that support it and may not w ork properly with some components due to thei r settings or compatibility . • When set to “ On ”, power consumption ...
-
Onkyo HT-S5300 - page 42
42 En A udyss ey Settings ■ Dynamic EQ ■ Dyn V ol (Dynamic V olume) See “Dynamic EQ” and “Dynamic V olume” of “ Audio Adjust” ( ➔ 37 ). Late Night Funct ion W ith the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts e ven when listening at lo w volume lev els— ...
-
Onkyo HT-S5300 - page 43
43 En A/V Sync When using progressi ve scanning on your Blu-ray Disc/ D VD player , you may find that the picture and sound are out of sync. W ith this setting, you can correct this b y delaying the audio signals. ■ A/V Sync ` 0m s to 100 ms in 10 ms steps Note • A/V Sync is disabled whe n the Direct listening mode is used with an analog input ...
-
Onkyo HT-S5300 - page 44
44 En Zone 2 In addition to your main listening room, you can also enjoy pla yback in the other room, or as we call Zone 2. And, you can select a different source for each room. There are two w ays you can connect Zone 2 speakers: 1. Connect them directly to the A V receiv er. 2. Connect them to an amp in Zone 2. Connecting Y our Zone 2 Speaker s D ...
-
Onkyo HT-S5300 - page 45
45 En If you’ ve connected your Zone 2 speakers to the A V receiv er, as explained in “C onnecting Y our Zone 2 Speak- ers Directly to the A V rece iv er” ( ➔ 44 ), you must set the “ Front Hi gh/Zone2 ” setting to “ Zone2 ”. Menu Hard ware Note •W h e n “ Zone2 ” is selecte d and Zone 2 turned on, the Zone 2 speakers connecte ...
-
Onkyo HT-S5300 - page 46
46 En Contro lling Zone 2 with the Remote Contro ller Note • T o control Zone 2, you must press the remo te controller’ s ZONE2 firs t. Adjusting the V olume for Zone 2 ■ Operating with the remote controller ■ Operating on the A V receiver If your Zone 2 speakers are connected to a recei ver or inte- grated amp in Zone 2, use its v olume co ...
-
Onkyo HT-S5300 - page 47
47 En Contr olling iP od Models sold are dif ferent depending on the re gion. Connecting an Onky o Dock A *1 B No. Onkyo Dock Cable Note Pa ge A UP-A1 Dock (Included) (Universal Port Option Dock) — • When UP-A1 Dock th at seated iPod is connected, the powe r consumption on standby mode slightly increases. • Y ou can control your iPod when “ ...
-
Onkyo HT-S5300 - page 48
48 En UP-A1 Dock W ith the supplied UP-A1 Dock, you can easily play the music, photo, or movie stored on y our Apple iPod through the A V receiv er and enjoy great sound. Y ou can use the A V receiv er’ s remote controller t o operate your iPod. ■ Compatible iP od models Made for: • All iPhone models • iPod touch (2nd generation) • iPod t ...
-
Onkyo HT-S5300 - page 49
49 En ■ Charging Y our iP od models Battery The UP-A1 Dock charges your iPod models battery while your iPod is in the UP-A1 Dock and connected to the UNIVERSAL PORT jack on the A V receiv er. While your iPod is seated in the UP-A1 Dock, its battery will be charge d when the A V receiv er is set to “On” or “Standb y”. Note • When UP-A1 D ...
-
Onkyo HT-S5300 - page 50
50 En ✔ : A vailable b uttons Note • W ith some iPod models, generatio ns and RI Docks, certain butto ns may not work as e xpected. • For detailed operation of the iPod, please re fer to the instr uction manual of RI Dock. *1 This button does not turn the Onkyo DS-A2 or DS-A2X RI Dock on or off. Y our iPod may not respond the firs t time you ...
-
Onkyo HT-S5300 - page 51
51 En Contr olling Other Components Y ou can use the A V recei ver’ s remote controller (RC-764M) to control your ot her A V components. This section explains ho w to ente r the remote control code (with the default underlined ) for a component that you want to control: D VD, TV , CD, etc. The follo wing REMOTE MODE are preprogrammed with remote ...
-
Onkyo HT-S5300 - page 52
52 En If you want to control an Onkyo component b y pointing the remote controller direct ly at it, use the follo wing remote control codes: ` 32900 : Onkyo Blu-ray Disc player ` 32901 : Onkyo HD-D VD player ` 70868 : Onkyo MD recorder ` 71323 : Onkyo CD recorder ` 82990 : Onkyo Dock Note • If you connect an cassette tape deck to the TV/CD IN jac ...
-
Onkyo HT-S5300 - page 53
53 En Note • W ith some components, certain buttons may not work as expected, and some may not work at all. ✔ : A vailable buttons *1 The p function is not supp orted. The p sup- ported by the A V receiver is the CEC system control function of the HDMI standard. *2 These buttons functions as colored buttons or A, B, C, D but- tons. *3 3 (Pause) ...
-
Onkyo HT-S5300 - page 54
54 En T r oubleshooting If you ha ve an y trouble using the A V receiv er, look for a solution in this section. If you can’t resolv e the issue your- self, contact your Onkyo dealer . ■ Can’t turn on the A V receiver ■ The ST ANDBY indicator flas hes red ■ There’ s no sound, or it’ s ver y quiet ■ Only the fr ont spe akers pr oduce ...
-
Onkyo HT-S5300 - page 55
55 En ■ Only the center speaker produces sound ■ The surround speakers pr oduce no sound ■ The center speaker pr oduces no sound ■ The fro nt high or surr ound bac k speakers prod uce no sound ■ The subwoofer produces no sound ■ There’ s no sound with a cer tain signal format ■ Can’t get 6.1/7.1 pl ay bac k ■ The volume cannot b ...
-
Onkyo HT-S5300 - page 56
56 En ■ There’ s no picture from a so urce connect ed to an HDMI IN ■ The on-screen menus don’t appear ■ Reception is noisy , FM stereo reception is noisy , or the FM ST EREO indicator doesn’ t light ■ The remote controller doesn’t w o rk ■ Can’t control other components ■ There’ s no sound ■ There’ s no video ■ The A ...
-
Onkyo HT-S5300 - page 57
57 En ■ The A V rec eiver unexpectedly selects y our iPod as the input source ■ Can’t record ■ There’ s no sound ■ The sound changes when I conne ct m y headphones ■ How do I change the language of a m ultiplex sour ce ■ The u fun ctions don’t w ork ■ The functions A uto P o wer On/Standb y and Direct Change don’t work for com ...
-
Onkyo HT-S5300 - page 58
58 En Specifications Amplifier Section Video Section Tu n e r S e c t i o n General ■ HDMI ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Others Specifications and features are subject to change without notic e. A V receiver Rated Output Power All channels: (North American) 130 watts mini mum continuo us power per cha ...
-
Onkyo HT-S5300 - page 59
59 En ■ Subwoofer (SKW -580) ■ Front Speaker (SKF-580) ■ Center Speaker (SKC-580) ■ Surround/Surround Back Speaker (SKR-580/SKB-580) Specif ications and features are subject to change without notice. 7.1ch Home T heater Speaker P ac kage Ty p e Bass -reflex Input sens itivity/Imp edance 140 mV/20 k Ω Maximum output power 290 W (Dynami c p ...
-
Onkyo HT-S5300 - page 60
60 En About HDMI Designed to meet the inc reased demands of digital TV , HDMI (High Definition Mu ltimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc p layers/D VD pl ayers, set-top boxes, and other video components. Until no w , sev era l separate video and audio ca bles hav e been required to conne ...
-
Onkyo HT-S5300 - page 61
61 En Using an RIHD-compatible TV , Pla yer , or Recorder p , which stands for Remote Interacti ve o ver HDMI, is the nam e of the system control function found on Onkyo components. The A V receiver can be used with CEC (Consumer Electroni cs Control), which allo ws system control ov er HDMI and is part of the HDMI standard. CEC provides inter oper ...
-
Onkyo HT-S5300 - page 62
62 En ■ How to co nnect and setup 1 Conf irm the connecting and setting. 1. Connect the HDMI OUT jack to the HDMI input jack of the TV . 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the A V receiv er using an optical digita l cable. Note • When the audio return channel (ARC) function is used with TV for HDMI 1.4, it shou ...
-
Onkyo HT-S5300 - page 63
63 En Memo ...
-
Onkyo HT-S5300 - page 64
SN 29400216 Y1002-1 (C) Copyright 2010 ONKY O CORPORA TION Japan. All rights reser ved. * 2 9 4 0 0 2 1 6 * Sales & Product Planning Div . : 2-1, Nisshin-cho, Ne yaga wa-shi, OSAKA 572-8540, J AP AN T el: 072-831-8023 F ax: 072-831-8163 ONKY O U.S.A. CORPORA TION 18 P ark Wa y , Upper Saddle River , N.J. 07458, U .S.A. T el: 800-229-1687, 201-7 ...
Do you have a question concerning Onkyo HT-S5300?
Use the form below
If you did not solve your problem by using a manual Onkyo HT-S5300, ask a question using the form below. If a user had a similar problem with Onkyo HT-S5300 it is likely that he will want to share the way to solve it.