English dropdown-ico

Manual Technika LCD32-209V

30 pages 7.04 mb
Download

Go to site of 30

Summary
  • Technika LCD32-209V - page 1

    LCD32-209V LCD32-209V COLOUR TELEVISION WITH REMOTE CONTROL OPERA TING INSTRUCTIONS For assistance, please call our T esco Electrical Helpline on 0845 4566767 ...

  • Technika LCD32-209V - page 2

    English - 1 - Contents Features ................................................................. 2 Accessories ............................................................ 2 Introduction ............................................................. 2 Preparation ............................................................. 2 Safety Precautions ... ...

  • Technika LCD32-209V - page 3

    English - 2 - Features • Remote controlled colour LCD TV . • Fully integrated digital TV (DVB-T). • HDMI connectors for digital video and audio. This connection is also designed to accept high de fi nition signals. • 200 programmes from VHF , UHF(analogue). • 300 programmes for digital mode (IDTV). • OSD menu system. • Scart socket f ...

  • Technika LCD32-209V - page 4

    English - 3 - Safety Precautions Please read the following recommended safety precautions carefully for your safety . Power Source The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience. Power Cord Do not place the set, a piece of furniture, etc. on the power cor ...

  • Technika LCD32-209V - page 5

    English - 4 - Headphone V olume Excessive sound pressure from earphones and headphones can cause hearing loss. Installation T o prevent injury , this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available). LCD Screen The LCD panel is a very high technology ...

  • Technika LCD32-209V - page 6

    English - 5 - Overview of the Remote Control ABC ABC AB C DEF DEF DEF GHI GHI GHI JKL JKL JKL MNO MNO MNO PQR PQR PQR STU STU STU VWX VWX VWX YZ YZ YZ 1 2 3 4 5 6 7 8 9 0 AV A V SOURCE SOURC E EXIT EXIT EXIT -/-- -/- - INFO INFO INF O I-II I-II MENU MENU TV/DTV TV/ DTV TV/ DTV P/CH P/CH OK SE L EC T SE L EC T WIDE WIDE WIDE GUIDE GUIDE GUIDE PP PP ...

  • Technika LCD32-209V - page 7

    English - 6 - MENU TV/AV P/CH MENU TV/AV P/CH LCD TV and Operating Buttons Standby button 1. TV/A V button 2. Programme Up/Down buttons 3. V olume Up/Down buttons 4. Note: Press “ ”/“ ” buttons at the same time to view main menu. Viewing the Connections- Back Connectors SCART socket 1. inputs or outputs for external devices. Connect the SCA ...

  • Technika LCD32-209V - page 8

    English - 7 - S/PDIF Out 4. outputs digital audio signals of the currently watched source. Use an S/PDIF coaxial cable to transfer audio signals to a device that has S/PDIF input. Y ou should also set SPDIF Out option in the Sound Menu as On. RF Input 5. connects to an antenna or a cable. Note that if you use a decoder or a media recorder , you sho ...

  • Technika LCD32-209V - page 9

    English - 8 - Power Connection IMPORT ANT : The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. • Plug the power cable to the mains socket outlet. Connecting to a DVD Player If you want to connect a DVD player to your LCD TV , ...

  • Technika LCD32-209V - page 10

    English - 9 - Connecting Other Equipment via Scart Most devices support SCART connection. Y ou can connect a; DVD recorder , a VCR or a decoder to your LCD TV by using the SCAR T socket. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections. For more information, refer to yo ...

  • Technika LCD32-209V - page 11

    English - 10 - Basic Operations Y ou can operate your TV using both the remote control and onset buttons. Operation with the Buttons on the TV V olume Setting • Press “ ” button to decrease volume or button to increase volume, so a volume level scale (slider) will be displayed on the screen. Programme Selection • Press “ P/CH + ” button ...

  • Technika LCD32-209V - page 12

    English - 1 1 - After Automatic Search is completed, the following message asking for analogue channel search appears on the screen: T o search for analogue channels, select “Y es”. TV switches to the analogue TV mode. Analogue search menu will be displayed. Select your Country , Language and T ext language by using “ ” or “ ” and “ ? ...

  • Technika LCD32-209V - page 13

    English - 12 - RED button (Shrink) : makes the info boxes smaller . GREEN button (Expand) : makes the info boxes larger . YELLOW button (Prev . Day) : displays the programmes of previous day . BLUE button (Next day) : displays the programmes of the next day . INFO (Details) : displays the programmes in detail. Numeric buttons (Jump) : go to preferr ...

  • Technika LCD32-209V - page 14

    English - 13 - Navigating the Entire Channel List Press “ ” or “ ” button for selecting the previous or next channel. Y ou can press RED or GREEN button to move page up or page down. T o watch a speci fi c channel, highlight it using “ ” or “ ” button and then press “ OK ” button, while the “Select” item on Channel List men ...

  • Technika LCD32-209V - page 15

    English - 14 - lock a channel you should know the parental lock password (default value is set to 0000 in the factory and can only be changed from the Con fi guration menu). Select the channel to be locked by highlighting it and select the Lock option by pressing “ ” or “ ” button. When the OK button is pressed, a dialog OSD asking for the ...

  • Technika LCD32-209V - page 16

    English - 15 - Some Digital T errestrial channels operate on a Pay Per View basis. These require a subscription and a hardware decoder . Obtain the Conditional Access Module (CAM) and the viewing card by subscribing to a pay channel company , then insert those to the TV using the following procedure. • Switch off the TV and unplug from the mains. ...

  • Technika LCD32-209V - page 17

    English - 16 - Channel List Use “ ” or “ ” buttons to go to Channel List option. Use “ ” or “ ” buttons to toggle Channel List Mode. If you select “TV Only”, with the “ ” or “ ” buttons, you navigate through only TV channels. If you select “Radio Only”, with the “ ” or “ ” buttons, you navigate through only r ...

  • Technika LCD32-209V - page 18

    English - 17 - Set PIN Use “ ” or “ ” buttons to go to “Set PIN” option. Press OK to display the “Set PIN” window . Use numeric buttons to enter new pin number you will need to input your new pin a second time for veri fi cation purposes. The factory default pin number is 0000, if you change the pin number make sure you write it do ...

  • Technika LCD32-209V - page 19

    English - 18 - Note: If the Country option is set to Denmark, Sweden, Norway or Finland, the Language Settings menu will function as described below: Language Settings In the con fi guration menu, highlight the Language Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings submenu will be displayed on the screen: Use ...

  • Technika LCD32-209V - page 20

    English - 19 - In both manual and auto search any existing channel in the database is not re-stored to avoid redundant duplicates of that channel. Clear Service List (*) (*) This setting is visible only when the Country option is set to Denmark, Sweden, Norway or Finland. Use this setting to clear channels stored. Press “ ” or “ ” button to ...

  • Technika LCD32-209V - page 21

    English - 20 - Noise Reduction If the broadcast signal is weak and the picture is noisy , use Noise Reduction setting to reduce the noise amount. Press “ ” or “ ” button to select Noise Reduction. Press “ ” or “ ” to choose from one of these options: Low , Medium , High or Off . Film Mode Films are recorded at a different number of ...

  • Technika LCD32-209V - page 22

    English - 21 - Headphone Press “ ” or “ ” button to select Headphone . Press “ ” button to view the headphone menu. Note: Headphone will be disabled when SPDIF option is set to on. Headphone sub-menu options are described below: V olume Press “ ” or “ ” button to select V olume . Press “ ” button to increase headphone volume ...

  • Technika LCD32-209V - page 23

    English - 22 - Menu Background Press “ ” or “ ” button to select Menu Background . Y ou can set menu background level by pressing “ ” or “ ” button. Backlight This setting controls the backlight level. Select Backlight by pressing “ ” or “ ” button. Press“ ” or “ ” button to set Backlight to Auto, Medium , Maximum or ...

  • Technika LCD32-209V - page 24

    English - 23 - Colour System Press “ ” or “ ” button to select Colour System . Use “ ” or “ ” button to change the colour system to P AL, SECAM, P AL60, AUT O, NTSC 4,43 or NTSC 3,58. Store Press “ ” or “ ” button to select Store Programme . Press “ ” or OK button to store the settings. “ Stored... ” will be displaye ...

  • Technika LCD32-209V - page 25

    English - 24 - In source menu, highlight a source by pressing “ ” or “ ” button and switch to that mode by pressing “ ” button. Source options are; TV , DTV , EXT -1 , FAV , HDMI-1 , HDMI-2 and YPbPr Note : Once you have connected optional equipment systems to your TV , you should select the required input to view pictures from that sou ...

  • Technika LCD32-209V - page 26

    English - 25 - Cinema This zooms up the wide picture (16:9 aspect ratio) to the full screen. Subtitle This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. Zoom This option zooms to the picture. Note: Y ou can shift to screen up or down by pressing “ ” / “ ” buttons while picture zoom is selected as panaromic ...

  • Technika LCD32-209V - page 27

    English - 26 - Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or teletext unrecognisable? Check if you have entered the correct frequency . Please retune the channels. The picture quality may degrade when two peripherals are ...

  • Technika LCD32-209V - page 28

    English - 27 - Speci fi cations TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND Digital Reception MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Pro fi le 1 for UK Object carousel support compliant with ISO/IEC 135818-6 and UK DTT pro fi le Frequency range: 474-850 MHz for ...

  • Technika LCD32-209V - page 29

    English - 28 - Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply . MAINS (AC) OPERA TION The wires in the mains lead are coloured in accordance with the following code : IMPORT ANT As the colours of the wires in the mains lead of this appliance may not correspon ...

  • Technika LCD32-209V - page 30

    5 0 1 5 3 0 2 4 ...

Manufacturer Technika Category CRT Television

Documents that we receive from a manufacturer of a Technika LCD32-209V can be divided into several groups. They are, among others:
- Technika technical drawings
- LCD32-209V manuals
- Technika product data sheets
- information booklets
- or energy labels Technika LCD32-209V
All of them are important, but the most important information from the point of view of use of the device are in the user manual Technika LCD32-209V.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Technika LCD32-209V, service manual, brief instructions and user manuals Technika LCD32-209V. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Technika LCD32-209V.

Similar manuals

A complete manual for the device Technika LCD32-209V, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Technika LCD32-209V by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Technika LCD32-209V.

A complete Technika manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Technika LCD32-209V - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Technika LCD32-209V, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Technika LCD32-209V, that we can find in the current document
3. Tips how to use the basic functions of the device Technika LCD32-209V - which should help us in our first steps of using Technika LCD32-209V
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Technika LCD32-209V
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Technika LCD32-209V in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Technika LCD32-209V?

Use the form below

If you did not solve your problem by using a manual Technika LCD32-209V, ask a question using the form below. If a user had a similar problem with Technika LCD32-209V it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)