Manual Hotpoint SWMD10437

16 pages Not applicable
Download

Go to site of 16

Summary
  • Hotpoint SWMD10437 - page 1

    GB 1 English,1 Contents Installation, 2-3-4-5 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Care and maintenance, 6 Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the p ...

  • Hotpoint SWMD10437 - page 2

    2 GB Installation ning the adjustable front feet (see figure); the angle of inclination, measured accor ding to the worktop, must not exceed 2°. Levelling your appliance correctly will pr ovide it with stability and avoid any vibrations, noise and shifting during operation. If it is placed on a fitted or loose carpet, adjust the feet in such a way ...

  • Hotpoint SWMD10437 - page 3

    GB 3 Connecting the drain hose Connect the drain hose, without ben- ding it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor; The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot. If it is plac ...

  • Hotpoint SWMD10437 - page 4

    4 GB As the colours of the wires in the lead may not correspond with the colour ed markings iden- tifying the terminals in your plug, proceed as follows: Connect Green & Y ellow wir e to terminal marked E or or coloured Gr een or Green & Y ellow . Connect Brown wir e to terminal marked L or coloured Red. Connect Blue wire to terminal marked ...

  • Hotpoint SWMD10437 - page 5

    GB 5 ...

  • Hotpoint SWMD10437 - page 6

    6 GB Car e and maintenance Cutting of f the water and electri- city supplies • Tu rn off the water tap aft er e ver y wa sh c ycle. Thi s wi ll l imit wear on the hyd raul ic s ystem in- sid e th e wa shing mac hine and he lp t o pr event lea ks. • Unplug the washing machine when cleaning it and during all maintenance work. Cleaning the washing ...

  • Hotpoint SWMD10437 - page 7

    GB 7 Pr ecautions and tips ! This washing machine was designed and constructed in accordance with international safety regulations. The fol- lowing information is provided for safety r easons and must therefor e be read carefully . General safety • This appliance was designed for domestic use only . • This app lian ce ca n be use d by chil dr e ...

  • Hotpoint SWMD10437 - page 8

    8 GB Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”) . ON/OFF button : press this briefly to switch the ma- chine on or off. The START/PAUSE indicator light, which flashes slowly in a green colour shows that the machine is switched on. To switch off the washing machine during the wash ...

  • Hotpoint SWMD10437 - page 9

    GB 9 Display The display is useful when programming the machine and pr ovides a great deal of information. The two upper strings A and B provide details of the wash cycle selected, the wash cycle phase in pr ogress and all informa- tion relating to the pr ogress status of the wash cycle. String C shows the time remaining until the end of the wash c ...

  • Hotpoint SWMD10437 - page 10

    10 GB Running a wash cycle 1. SWITCH THE MACHINE ON. Press the On/Off button ; the text POWER ON will appear on the display and the START/PAUSE indicator light will flash slowly in a green colour. 2. LOAD THE LAUNDRY. Open the porthole door. Load the laundry, making sure you do not exceed the maximum load value indicated in the table of programmes ...

  • Hotpoint SWMD10437 - page 11

    GB 11 W ash cycles and functions Wash functions ! If the selected function is not compatible with the programmed wash cycle, the indicator light will flash and the function will not be activated. ! If the selected function is not compatible with another function which has been selected previously, the indi- cator light corresponding to the first fu ...

  • Hotpoint SWMD10437 - page 12

    12 GB Deter gents and laundry Detergent dispenser drawer Good washing results also depend on the corr ect dose of detergent: adding too much detergent will not necessarily result in a mor e efficient wash, and may in fact cause a build up on the inside of your appliance and contribute to environmental pollution. ! U se po wd er de ter gen t for w h ...

  • Hotpoint SWMD10437 - page 13

    GB 13 T r oubleshooting Y our washing machine could fail to work. Before contacting the T echnical Assistance Centre (see “Assistance”) , make sure that the problem cannot be solved easily using the following list. Problem: The machine does not switch on. The wash cycle does not start. The machine does not fill with wa- ter or “NO W A TER CHE ...

  • Hotpoint SWMD10437 - page 14

    14 GB The machine is noisy . The machine wont spin properly . The machine leaks from the di- spenser . The machine leaks (other than dispenser). The indicator lights on the console are flashing rapidly . The machine smells. The machine door cannot be opened. Door Seal damaged at the bottom. The water level is too low when the machine is washing. Th ...

  • Hotpoint SWMD10437 - page 15

    GB 15 Assistance Guarantee 12 Months Parts and Labour Guarantee Y our appliance has the benefit of our manufacturer’ s guarantee, which covers the cost of br eakdown repairs for twelve months from the date of pur chase. This gives you the reassurance that if, within that time, your appliance is pr oven to be defective because of either workmanshi ...

  • Hotpoint SWMD10437 - page 16

    16 GB 195125113.00 05/2014 - Xerox Fabriano After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer . Essential Contact Information Hotpoint Service We ar e the largest service team in Europe of fering you access to 400 skilled telephone advisors and 1000 fully ...

Manufacturer Hotpoint Category Washing Machine

Documents that we receive from a manufacturer of a Hotpoint SWMD10437 can be divided into several groups. They are, among others:
- Hotpoint technical drawings
- SWMD10437 manuals
- Hotpoint product data sheets
- information booklets
- or energy labels Hotpoint SWMD10437
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hotpoint SWMD10437.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hotpoint SWMD10437, service manual, brief instructions and user manuals Hotpoint SWMD10437. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hotpoint SWMD10437.

A complete manual for the device Hotpoint SWMD10437, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hotpoint SWMD10437 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hotpoint SWMD10437.

A complete Hotpoint manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hotpoint SWMD10437 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hotpoint SWMD10437, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hotpoint SWMD10437, that we can find in the current document
3. Tips how to use the basic functions of the device Hotpoint SWMD10437 - which should help us in our first steps of using Hotpoint SWMD10437
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hotpoint SWMD10437
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hotpoint SWMD10437 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hotpoint SWMD10437?

Use the form below

If you did not solve your problem by using a manual Hotpoint SWMD10437, ask a question using the form below. If a user had a similar problem with Hotpoint SWMD10437 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)