-
Eclipse - Fujitsu Ten AVN 5500 - page 1
Be sure to read this installation manual thoroughly prior to installation and making connections. If installation methods or non-standard parts not specified in this installation manual are used, accidents or injury may result. Professional installation is recommended, contact the place of purchase to schedule an appointment. After reading the owne ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 2
- 2 - Components Components Check that all of the following components are present Check that all of the following components are present GPS antenna components GPS antenna x 1 10 Waterproof cushion x 1 11 Ground plate x 1 12 Body protective sheet x 1 13 When installing the main unit, some vehicle models may require the use of items that need to be ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 3
- 3 - Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the AVN5500. They show safe and correct ways to handle the main unit to prevent personal injury to you and others and avoid damage to property. Before reading through the manual, take time to read through and learn the important information listed ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 4
- 4 - • • This main unit must be operated only as on-board main unit, or it may cause electrical shock or injury. • • Do not play distorted sounds for long periods of time; the speakers may overheat and cause a fire. • • Once installation and wiring have been completed, return the brakes and electrical equipment such as lights, horn, ha ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 5
- 5 - Installation Diag Installation Diag r r am am GPS antenna (When installing inside the vehicle) 10 GPS antenna (When installing outside the vehicle) 10 • • If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windshield will determine the accuracy of the GPS antenna to receive the GPS signal. I ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 6
- 6 - • • Never cut the insulation on the power wire or use it to power any other equipment. If the rated current capacity of the power wire is exceeded, fire and electric shocks may result. • • The wires should be secured with tape or a similar securing method to prevent any obstructions while driving. If they get wound or entangled around ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 7
- 7 - Wire colors and connection points f or connection wires and and 4 3 2 Never connect the power supply to the speaker wires (No.6 and No.7), otherwise it will cause damage to the main unit. Caution B+ (Yellow) Connect where power is constantly available, regardless of the ignition key's position. ACC (Red) Connect where the power comes on ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 8
- 8 - ACC ON/OFF power supply terminal (blue/white) If you use this terminal to connect main unit such as an external amplifier, you can still hear the audio guidance from the navigation system even when audio is turned off. Connect it to the control terminal for the external amplifier or other main unit. ※ A popping noise may be heard when the e ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 9
- 9 - Vehicle component adapter wires Vehicle harness From main unit - Example of using vehicle adapter wires - - V ehicle connections - Power supplies for combined equipment Español Français Italiano Nederlands Svenska English • • You will need to purchase the necessary vehicle component adapter wire for the vehicle so that the power supplie ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 10
- 10 - Notes on installation • • Check the vehicle speed pulse signal, parking brake signal, and reverse signal carefully before making the connections. If the wires are incorrectly connected, accidents or problems with correct operation may result. • • The label on the vehicle speed pulse signal wire contains a protection circuit, so do no ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 11
Route the parking brake signal wire to the main unit. - 11 - Foot-operated Parking brake Hand-operated Parking brake - A connecting the point for parking brake (example) - Attach a splicing connector at this location. Reverse signal wire Reverse lamp Reverse signal wire - A connecting point for the reverse signal (example) - • • Be sure to conn ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 12
- 12 - System connection e System connection e xample xample • • Install and connect all of the peripheral units before connecting them to the main unit. • • Do not remove any of the protective caps (RCA, etc.) unless in use. • • Be sure to wrap the connection wires with tape (PVC tape) to insulate them. Tip • • Never cut the insula ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 13
- 13 - Tip Installing the GPS antenna Installing the GPS antenna Notes on installation • • Do not install the antenna in places (such as front pillars and roof panel) that are shielded from the sky. • • The GPS antenna should be installed in a level position where the signals will be as unobstructed as much as possible, such as on the vehic ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 14
- 14 - - Installation inside the vehicle (example) - Choose an installation location on the dashboard which is flat and has a clear view of the sky. 1 Install the ground plate to the dashboard. 2 Install the GPS antenna to the ground plate. 3 Ground plate 12 Secure the GPS antenna. 4 Route the GPS antenna wire along the crevice between the front wi ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 15
- 15 - - Installation outside the vehicle (example) - Choose an installation location where the GPS antenna can be attached securely. 1 Remove the backing paper from the body protective sheet and attach the sheet to the vehicle. 2 Install the GPS antenna on top of the body protective sheet. 3 Body protective sheet (clear) 13 Route the GPS antenna w ...
-
Eclipse - Fujitsu Ten AVN 5500 - page 16
Remove the pocket and any other accessories from the center cluster to make room for the main unit. 1 Remove the mounting brackets for the pocket. 2 Attach the brackets to the main unit. 3 Install the main unit in the vehicle. 4 Be careful not to forcefully push on the main unit's display or buttons during installation. This may result in dama ...
Do you have a question concerning Eclipse - Fujitsu Ten AVN 5500?
Use the form below
If you did not solve your problem by using a manual Eclipse - Fujitsu Ten AVN 5500, ask a question using the form below. If a user had a similar problem with Eclipse - Fujitsu Ten AVN 5500 it is likely that he will want to share the way to solve it.