English dropdown-ico

Manual Oregon Scientific EMR812HGN

12 pages 0.34 mb
Download

Go to site of 12

Summary
  • Oregon Scientific EMR812HGN - page 1

    1 EN MULTI-CHANNEL IN-OUT CABLE FREE THERMO-HYGROMETER MODEL : EMR812HGN USER’S MANUAL INTRODUCTION Congratulations on your purchase of the Multi-Channel In-Out Thermometer / Hygrometer (EMR812HGN) with a 433MHz cable- free thermo-hygro sensor. Enclosed with this package is one (1) main display unit and one (1) cable-free remote thermo-hygro sens ...

  • Oregon Scientific EMR812HGN - page 2

    2 EN A Extra large two-line Liquid Crystal Display (LCD) Multifunction display showing temperature and humidity, max./min. memory, and trend indicators for the main unit and remote sensors. B CHANNEL button - Selects among different channels - Activates remote sensor scanning mode C IN/REMOTE - Selects between the main-unit display and a selected r ...

  • Oregon Scientific EMR812HGN - page 3

    3 EN H Wall-mount holder Supports the remote unit in wall-mounting I Removable table stand For standing the remote unit on a flat surface BEFORE YOU BEGIN To ensure proper functioning of the EMR812HGN follow this setup procedure. For best operation: 1. Assign different channels to different remote units. 2. Insert batteries for remote units before ...

  • Oregon Scientific EMR812HGN - page 4

    4 EN Follow these steps to install / replace batteries: 1. Remove the screws on the battery compartment. 2. Select the channel number on the CHANNEL slide switch. 3. Select the temperature display unit on the ° C/ ° F slide switch. 4. Insert the batteries strictly according to the polarities shown therein. 5. Replace the battery compartment door ...

  • Oregon Scientific EMR812HGN - page 5

    5 EN GETTING STARTED Once batteries are placed in a given remote sensor unit, it will start transmitting information at 40-second intervals. Also, for approximately a 3-minute duration, the main unit will automatically search for signals once batteries are installed. Upon successful reception, the individual channel temperature reading will be disp ...

  • Oregon Scientific EMR812HGN - page 6

    6 EN The unit is in searching mode. Transmission data are securely registered. No signals. THE COMFORT-LEVEL ICONS The comfort level is based on the recorded relative humidity. An indicator will be displayed ot show if the level is comfortable, wet or dry. TEMPERATURE AND HUMIDITY TREND INDICATORS The temperature-trend and humidity-trend indicators ...

  • Oregon Scientific EMR812HGN - page 7

    7 EN To deactivate the remote-sensor scanning mode: ◊ Press any button. MAXIMUM AND MINIMUM TEMPERATURE AND HUMIDITY The maximum and minimum recorded temperature and humidity readings will automatically be stored in the memory. To display the maximum and minimum display memory: 1. Select the channel to be checked. 2. Press MEM/CLEAR once to displ ...

  • Oregon Scientific EMR812HGN - page 8

    8 EN Note: The temperature range is from -50 ° C (-58 ° F) to +70 ° C (158 ° F). If this is the first time you set the limits, the lower limit will start from -50 ° C (-58 ° F) and the upper limit +70 ° C (158 ° F). Otherwise, the reading will start from the temperature last selected. The humidity range is from 2% to 98%. If this is the fir ...

  • Oregon Scientific EMR812HGN - page 9

    9 EN TRANSMISSION COLLISION Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of this product and cause temporarily reception failure. This is normal and does not affect the general performance of the product. The transmission and reception of temperature readings will resum ...

  • Oregon Scientific EMR812HGN - page 10

    10 EN THE RESET BUTTON This button is only used when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values. PRECAUTIONS This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions: 1. ...

  • Oregon Scientific EMR812HGN - page 11

    11 EN General RF Transmission Frequency : 433 MHz No. of Remote unit : Maximum of 3 RF Transmission Range : Maximum 30 meters Temperature compensation : 0.1 ° C to ( 0.2 ° F) Temperature sensing cycle : around 40 seconds Power Main unit : 2 pcs UM-3 or “AA” 1.5V alkaline batteries Remote sensing unit : 2 pcs UM-4 or “AAA” 1.5V alkaline ba ...

  • Oregon Scientific EMR812HGN - page 12

    12 EN EC-DECLARATION OF CONFORMITY This product complies with the essential requirements of Article 3 of the R&TTE 1999 / 5 / EC Directive, if used as intended and the following standards have been applied: Safety of information technology equipment (Article 3.1.a of the R&TTE Directive) Applied Standard EN 60950: 2000 Electromagnetic compa ...

Manufacturer Oregon Scientific Category Thermometer

Documents that we receive from a manufacturer of a Oregon Scientific EMR812HGN can be divided into several groups. They are, among others:
- Oregon Scientific technical drawings
- EMR812HGN manuals
- Oregon Scientific product data sheets
- information booklets
- or energy labels Oregon Scientific EMR812HGN
All of them are important, but the most important information from the point of view of use of the device are in the user manual Oregon Scientific EMR812HGN.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Oregon Scientific EMR812HGN, service manual, brief instructions and user manuals Oregon Scientific EMR812HGN. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Oregon Scientific EMR812HGN.

Similar manuals

A complete manual for the device Oregon Scientific EMR812HGN, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Oregon Scientific EMR812HGN by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Oregon Scientific EMR812HGN.

A complete Oregon Scientific manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Oregon Scientific EMR812HGN - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Oregon Scientific EMR812HGN, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Oregon Scientific EMR812HGN, that we can find in the current document
3. Tips how to use the basic functions of the device Oregon Scientific EMR812HGN - which should help us in our first steps of using Oregon Scientific EMR812HGN
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Oregon Scientific EMR812HGN
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Oregon Scientific EMR812HGN in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Oregon Scientific EMR812HGN?

Use the form below

If you did not solve your problem by using a manual Oregon Scientific EMR812HGN, ask a question using the form below. If a user had a similar problem with Oregon Scientific EMR812HGN it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)