English dropdown-ico

Manual Moog Videolarm WS6S-50NF-X2

12 pages Not applicable
Download

Go to site of 12

Summary
  • Moog Videolarm WS6S-50NF-X2 - page 1

    P R O D U C T I N S T R U C T I O N S INST ALLA TION PREP ARA TION INST ALLA TION PREP ARA TION 1. Choose an appropriate corner location. The WS6 can be mounted at any height in a corner . 2. Complete all wire and conduit runs prior to installation of the housing. REVISION DA TE: 11-11-2010 Depending on the voltage being used, refer to one of the f ...

  • Moog Videolarm WS6S-50NF-X2 - page 2

    - 2 - CAMERA BRACKET SE TUP 8. T o adjust the camera bracket, loosen the two thumb screws (Figure 6). When the desired focus and location are achieved tighten the thumb screws on the brackets in place using needle nose pliers. Use Loctite™ or equivalent to secure the screws, especially in installations where vibration is a concern. Figure 3 1. Co ...

  • Moog Videolarm WS6S-50NF-X2 - page 3

    - 3 - Figure 7 CAMERA FOCUSING (Figur e 7) 1. The camera is factory equipped with a 3.6mm xed lens. A 2.5mm lens is also provided. T o remove the 3.6mm lens, loosen the set screw and unscrew the lens counter-clockwise. 2. Fine focusing of the lens: Loosen the set screw in the lens mount and manually rotate the lens until a clear picture is achie ...

  • Moog Videolarm WS6S-50NF-X2 - page 4

    - 4 - WINDOW GU ARD™ P AINT SHIELD REPLACEMENT Y our W arrior 6 comes with a replaceable Window Guard™ paint shield to protect the front plate window from vandalism. If vandalism occurs (spray paint, scratches, etc.) you need only replace the shield, not the entire window . Additional shields can be ordered. T o replace the shield, use the foll ...

  • Moog Videolarm WS6S-50NF-X2 - page 5

    2 50 f t  3  4  5  8  13  W 3 00 f t  4  5  6  10  16  W 4 00 f t  5  6  8  13  21  W 5 00 f t  6  8  10  16  26  W 6 00 f t  8  10  12  19  31  W 8 00 f t  10  13  16  25  42  W 1 0 0 0 ft  13  16  20  32  52  W 1 2 5 0 ft ...

  • Moog Videolarm WS6S-50NF-X2 - page 6

    - 6 - IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS UNPACKING SERVICE 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8 Cable ...

  • Moog Videolarm WS6S-50NF-X2 - page 7

    6 5 4 3 2 1 WS6 - Exploded Diagram and Replacement P ar ts List P ar t Number Description 1 RPWS6010 W ARRIOR 6 F ACE PLA TE F ASTENER KIT 2 RPWS6020 W ARRIOR 6 FRONT PLA TE ASSEMBL Y 3 WS6PS W ARRIOR 6 REPLACEMENT P AINT SHIELD 4 RPWS6040 W ARRIOR 6 REPLACEMENT WINDOW KIT NTSC BOARD CAMERAS 5 RPWS6050 W ARRIOR 6 ST ANDARD RES, BLACK & WHITE, F ...

  • Moog Videolarm WS6S-50NF-X2 - page 8

    P ower Supply P ower A P ower B Camera Assembly Primar y P ower Video Signal Video Shield Monitor - 8 - (Ground Return) Figure A Ground Loop TROUBLESHOO TING If you experience problems with the camera picture please check these simple troubleshooting procedures for possible solutions before calling technical support. IMPORT ANT NOTE: If you h ...

  • Moog Videolarm WS6S-50NF-X2 - page 9

    A C Vo l t m e t e r Camera Monitor Bridge Tap NV-213 A NV-213 A - 9 - NV T TROUBLESHOO TING If you a re experi encing p roblems , attempt to simpl ify your setup. T est each cable segment separate ly . For exa mple, te st the camera and monitor together with out the other equi pment. Then add in the NVT transce ivers, b ack-to-b ack. T es t each s ...

  • Moog Videolarm WS6S-50NF-X2 - page 10

    - 10 - Depending on the voltage being used, refer to one of the formulas below to select the correct power supply for cameras connected in parallel (positive to positive, negative to negative): T otal current for a 12 VDC system: TO T AL CURRENT = (350mA x total number of cameras) Example: 350mA x 5 total cameras = 1750mA T otal current for a 24 V ...

  • Moog Videolarm WS6S-50NF-X2 - page 11

    - 1 1 - LIMITED W ARR ANT Y FOR VIDEOLARM INC. PRODUC TS VIDEOLARM INC. warrants this Product to be free from defects in material or workmanship, as follows: PRODUCTCA TEGORY P ARTS LABOR All Enclosures and Electronics Five (5) Y ears Five (5) Y ears Pan/T ilts Three (3) Y ears **6 months if used in autoscan Three (3) Y ears **6 months if used in a ...

  • Moog Videolarm WS6S-50NF-X2 - page 12

    - 12 - Pr oduct Registration / W arranty Thank you for choosing Videolarm. W e value your patronage and ar e solely committed to providing you with only the highest quality products available with unmatched customer service levels that ar e second- to-none in the security industry . Should a problem arise, r est assure that Videolarm stands behind ...

Manufacturer Moog Videolarm Category Security camera

Documents that we receive from a manufacturer of a Moog Videolarm WS6S-50NF-X2 can be divided into several groups. They are, among others:
- Moog Videolarm technical drawings
- WS6S-50NF-X2 manuals
- Moog Videolarm product data sheets
- information booklets
- or energy labels Moog Videolarm WS6S-50NF-X2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Moog Videolarm WS6S-50NF-X2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Moog Videolarm WS6S-50NF-X2, service manual, brief instructions and user manuals Moog Videolarm WS6S-50NF-X2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Moog Videolarm WS6S-50NF-X2.

Similar manuals

A complete manual for the device Moog Videolarm WS6S-50NF-X2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Moog Videolarm WS6S-50NF-X2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Moog Videolarm WS6S-50NF-X2.

A complete Moog Videolarm manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Moog Videolarm WS6S-50NF-X2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Moog Videolarm WS6S-50NF-X2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Moog Videolarm WS6S-50NF-X2, that we can find in the current document
3. Tips how to use the basic functions of the device Moog Videolarm WS6S-50NF-X2 - which should help us in our first steps of using Moog Videolarm WS6S-50NF-X2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Moog Videolarm WS6S-50NF-X2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Moog Videolarm WS6S-50NF-X2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Moog Videolarm WS6S-50NF-X2?

Use the form below

If you did not solve your problem by using a manual Moog Videolarm WS6S-50NF-X2, ask a question using the form below. If a user had a similar problem with Moog Videolarm WS6S-50NF-X2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)