English dropdown-ico

Manual Hitachi JPEG2000

80 pages 5.57 mb
Download

Go to site of 80

Summary
  • Hitachi JPEG2000 - page 1

    JPEG2000 S t and alone DVR User Guide - 1 - Date: 2006/07/05 VER: 1.5 Caution ……………………………………………………………………. 3 Package ……………………………………………………………………. 3 S pecification ……………………………………………………………………. 4 CHA ...

  • Hitachi JPEG2000 - page 2

    JPEG2000 S t and alone DVR User Guide - 2 - Disclaimer:  The product names menti oned in this manual a re used a s ident ification s only , while the cop yright of these names might belong to other companies.  The product spec and info are for reference only , and they may be updated from time to time without notification. CHAP .5 CD-R bck-up ...

  • Hitachi JPEG2000 - page 3

    JPEG2000 S t and alone DVR User Guide - 3 -  For you safety , unplug the power before moving the DVR, installing, or replacing any p arts or hard drive.  Make sure all the power cable and wires are properly se t up before using the DVR. Contact your distributor immediately if there is any defect.  T o avoid a short circuit, don’t leave a ...

  • Hitachi JPEG2000 - page 4

    JPEG2000 S t and alone DVR User Guide - 4 - Model 4/8/16 CH JPEG2000 St and Alone DVR Video Input 4/8/16CH VIDEO IN 1.0 VP-P ， 75OHM(BNC TYPE) Video Output (BNC TYPE) X 2 Video I/O VGA Output Support TFT LCD Monitor (Optional) Audio Input 4 CH Audi o Input (MONO type) Audio I/O (Optional) Audio Output 1 CH Audi o output (MONO type) Display Resolu ...

  • Hitachi JPEG2000 - page 5

    JPEG2000 S t and alone DVR User Guide - 5 - Protocol TCP/IP Netw ork Remote monitoring Remote Sof teware: Remote live view , playback, and save as A VI IE: Remote live view , backup, and save backup to A VI Back-up VCR, CD-R back-up, Backup via IE PTZ Control RS485 ， supports PELCO D and other protocols RS232 Controls DVR host through RS232 Alarm ...

  • Hitachi JPEG2000 - page 6

    JPEG2000 S t and alone DVR User Guide - 6 - 1-1 Front p anel introduction 1.[CD-R W]  Built-in CD-R W for CD-R back-up. 2.[IR Receiver & LED Lamps]  IR Remote Controller Receiver .  DVR S tatus LED: RUN- Flashes when play picture by picture through J. Shuttle. ACTIVE- On when the J. Shuttle is ready to use. REC- On while recording and ...

  • Hitachi JPEG2000 - page 7

    JPEG2000 S t and alone DVR User Guide - 7 - 10.[Control]  SEQ- Full screen sequencing or the smaller screen sequencing in PIP mode.  PIP- For entering the Picture in Picture mode from full screen mode.  NEXT - Switch other control keys in PTZ mode. Switch to other channel in a split screen.  ZOOM- T o enlarge the picture. Use the direct ...

  • Hitachi JPEG2000 - page 8

    JPEG2000 S t and alone DVR User Guide - 8 - 1-2 Back p anel introduction [4Channel] [8Channel] [16Channel] 1.[RS485, Relay Output, Sensor Input]  RS485, for direct connection to PTZ cameras.  16 sensor input s and 1 relay output. 2.[VGA Output]  Connection to a VGA monitor or TFT LCD. 3.[ETHERNET]  Connection to Ethernet device. 4.[RS-2 ...

  • Hitachi JPEG2000 - page 9

    JPEG2000 S t and alone DVR User Guide - 9 - 1-3 IR remote controller introduction 1.[MENU]  Enter menu or exit 2.[S plit /OSD]  4S: 4 split  9S: 9 split  16S: 16 split  OSD: OSD words on/of f 3.[1~16 Channel]  Switch channel in live or playback; password entering 4.[Control function]  FRZ- Freeze the screen in display  SEQ- ...

  • Hitachi JPEG2000 - page 10

    JPEG2000 S t and alone DVR User Guide - 10 - 2-1 Camera and monitor inst allation 2-1-1 Camera inst allation Connect camera to DVR camera in CH1~CH16 ※ Please do not start the DVR before the camera. installation is done. 2-1-2 Monitor and VCR inst allation Monitor: Connect the MONTIOR port on the DVR back panel to the “video in” port on the m ...

  • Hitachi JPEG2000 - page 11

    JPEG2000 S t and alone DVR User Guide - 1 1 - 2-1-3 Loop out inst allation T o monitor a single channel, connect the “loop out” of the corresponding channel to a monitor . T o record a specific channel individually , connect the “loop out” of the corresponding channel to a DVR, VCR, or other record device. 2-2 Sensor and alarm inst allation ...

  • Hitachi JPEG2000 - page 12

    JPEG2000 S t and alone DVR User Guide - 12 - 2-2-3 Relay output inst allation  Alarm output can be NO or NC, depending on the settings.  NO-COM: the NO and COM terminals are open-circuit, and it’ll become closed-circuit when alarm triggered.  NC-COM: the NC and COM terminals are closed-circui t, and it’ll become open-circuit when alarm ...

  • Hitachi JPEG2000 - page 13

    JPEG2000 S t and alone DVR User Guide - 13 - # 2 RxD # 3 TxD # 5 GND TxD # 3 GND # 5 RxD # 2 DVMR unit Other device (PC) D-SUB 9 cable ( twisted RS-232C c able)  T o connect DVR to a PC, users must use a twisted RS232 cable, as the illustration. 2-3-3 PTZ camera inst allation  Please connect the PTZ’ s D+ to the DVR’s D+ , and D- to D-. ? ...

  • Hitachi JPEG2000 - page 14

    JPEG2000 S t and alone DVR User Guide - 14 - 2-4 HDD inst allation [Step s] 1. Disassemble the bolts as illustrated. 2.Jumper setting Set up the HDD as MASTER or SLA VE. Please refer to the HDD manual of the jumper settings. 3.HDD Installation Please insert the HDD as shown in  , and make sure the HDD is set as “MASTER”. Caution: 1. Power of ...

  • Hitachi JPEG2000 - page 15

    JPEG2000 S t and alone DVR User Guide - 15 - 2-5 Power plugging Insert the adapter to the rear power socket of DVR. Insert the power cable to the other side of adapter . Plug in the power cable and power on the DVR. Caution: Please use a 100~240V AC 50~60HZ and 12VDC 8A or 5A pow er supply or it may damage the DVR. ...

  • Hitachi JPEG2000 - page 16

    JPEG2000 S t and alone DVR User Guide - 16 - 3-1 Display configuration 1.[T ime]  Current system time or the recorded time in playback 2.[Date]  Current system date or t he recorded date in playback 3.[Camera title]  Camera title of the displayed channel. Camera title can be modified in [SYSTEM MENU] f [CONFIGURA TION] f [CAMERA SETUP] f [ ...

  • Hitachi JPEG2000 - page 17

    JPEG2000 S t and alone DVR User Guide - 17 - 3-2 Screen switch/OSD position adjust  Press the number button to switch to the corresponding channel for its full screen view  Mode: press to switch among diff erent split modes: 4/6/8/9/13/16 splits. +/-: button to adjust the order  Adjust OSD position (High/Low): Low Position: Press “MODE? ...

  • Hitachi JPEG2000 - page 18

    JPEG2000 S t and alone DVR User Guide - 18 - 3-4-2 Freeze in Full mode  In full screen mode, Press FREEZE to freeze the channel, and press FREEZE again to cancel. 3-5 V iew in sequence  Press SEQ to enter Sequential Switch and press SEQ again to cancel.  Sequence order A ＞ B ＞ C ＞ D … ＞ A ＞ B …  Sequence time is adjust abl ...

  • Hitachi JPEG2000 - page 19

    JPEG2000 S t and alone DVR User Guide - 19 - 3-6 Zoom view  Go to the channel to be zoomed and press ZOOM to enl arge to 200%, use direction buttons to move the enlarged part.  Use the direction buttons to choose an area and pre ss ENTER to zoom. Press ZOOM again to cancel 3-7 Key lock  Af ter pressin g “K. LOCK “, you’ll see LOCK on ...

  • Hitachi JPEG2000 - page 20

    JPEG2000 S t and alone DVR User Guide - 20 - 3-8 Record   Emergency record (Red): press REC to start emgergency record at continuous record mode and at the best resolution and quality .  Schedule record (Green): record at the setup schedule, record mode, resolution and quality  S top record (White): the white dot shows up when the reco ...

  • Hitachi JPEG2000 - page 21

    JPEG2000 S t and alone DVR User Guide - 21 - 3-9 Playback 3-9-1 Play/S top  Press PLA Y key on front panel to st art playback st arting from the last playback time.  Press“ PLA Y ”during playback to c hoose to play forward or backward.  Press“ ST OP ”key to stop playback. 3-9-2 Search mode  Press SEARCH key to open the search di ...

  • Hitachi JPEG2000 - page 22

    JPEG2000 S t and alone DVR User Guide - 22 - 3-9-3 SEARCH BAR  Using +/- keys to select the recording percent age of the search bar . Press “ ENTER ”key to confirm and start the playback. 3-9-4 TIME/DA TE 1.[ST AR T] The start time and date of recording  It shows that the st art time and date of the recording dat a. 2.[END] The end time a ...

  • Hitachi JPEG2000 - page 23

    JPEG2000 S t and alone DVR User Guide - 23 - 3-9-6 Playback speed adjustment s  While playback, using the direction keys to adjust the playback speed.  S peed up the playback  Slow down the playback  R e w i n d  Play in forward direction The range of speed adjustment: 1/16X~1X, 1X~64X 3-9-7 Adjust Playback speed by IR remote control ...

  • Hitachi JPEG2000 - page 24

    JPEG2000 S t and alone DVR User Guide - 24 - 4-1 Log-In 4-1-1 DVR LOG-IN  Press MENU to login DVR system.  Use CH. SELECT ORS 1~0 to key in the password.  Then press ENTER to confirm and enter the system.  Erase the wrong password by PIP key . ※ Default password: ADMIN: blank (No default password. Pre ss ENTER key directly to enter th ...

  • Hitachi JPEG2000 - page 25

    JPEG2000 S t and alone DVR User Guide - 25 - 4-2 Display setup 1 . [ S C R E E N D I S P L A Y ]  Set up which information to be displayed at the Live and Playback mode. 2.[MONIT OR SETUP]  Adjust the VGA display resolution and the monitor color . 4-2-1 Screen display < L I V E > < PLA YBACK > Use cd to select an item and press EN ...

  • Hitachi JPEG2000 - page 26

    JPEG2000 S t and alone DVR User Guide - 26 - 4-2-2 Monitor setup 1.[VGA SETUP]  Set up the VGA resolution. 2.[COLOR BAR TEST]  Adjust the monitor colors by the color bar .  VGA resolution setup: 1024*768/60HZ 、 800*600/60HZ 、 640*480/60HZ 、 1024*768/75HZ 、 800*600/75HZ 、 640*480/75HZ  Monitor colors’ adjustm ent by Color Bar ...

  • Hitachi JPEG2000 - page 27

    JPEG2000 S t and alone DVR User Guide - 27 - 7 . [ B U Z Z E R S E T U P ]  Set the Buzzer ON or OFF at a cert ain condition. 8.[P ASSWORD SETUP]  Setup the password. 9.[SYSTEM INFORMA TION]  Show the system information, such as the versions of S/W and H/W , HDD model number , and CD-R model number . 4-3-1 HDD management 1.[HDD SETUP]  ...

  • Hitachi JPEG2000 - page 28

    JPEG2000 S t and alone DVR User Guide - 28 - 4-3-2 Time/date setup  The date and time set by the manufacture r maybe dif f erent from your time zone. It is very important to set up t hey system date and time before the DVR start s recording. Set the date and time by using direction buttons and [-][+] button or Jog shuttle.  Date format- Asia/ ...

  • Hitachi JPEG2000 - page 29

    JPEG2000 S t and alone DVR User Guide - 29 - [CAMERA COLOR SETUP]  Adjust the image color: Use [UP] and [DOW N] to select an item and use [-] and [+] or Jog shuttle to adjust the values.  CHANNEL: Select the camera to be modified. BRIGHTNESS: Adjust image brightness (-32~31). CONTRAST : Adjust color contrast (-32~31). SA TURA TION: Adjust col ...

  • Hitachi JPEG2000 - page 30

    JPEG2000 S t and alone DVR User Guide - 30 - [MOTION SETUP] 1.[CHANNEL]  Select a channel for the setup. 2.[SENSITIVITY GRADE]  Adjust motion detection sensitivity . 1 (LOW)~4 (VERY HIGH) 3.[MOTION DISPLA Y TYPE]  Setup the display type that marks the motion area.  BOX - shows block / CELL - shows green lattice 4.[RECORD DURA TION]  ...

  • Hitachi JPEG2000 - page 31

    JPEG2000 S t and alone DVR User Guide - 31 - 4-3-4 Interval setup 1.[SWITCH INTER V AL]  FULL- Full Screen Sequence Interval setup. (Range: 1~99 SEC) PIP- Picture in Picture, the sub-pictur e’s sequence interval setup. (Range: 1~99 SEC) 2.[EVENT RECORD]  Event Update T ime is to avoid the DVR fr om recording the event logs from the same eve ...

  • Hitachi JPEG2000 - page 32

    JPEG2000 S t and alone DVR User Guide - 32 - 4-3-6 Event popup setup 1.[CHANNEL]  Use [+] and [-] to select a channel. 2.[POPUP ON/OFF] Set up the POPUP function ON/OFF: Use [+ ] and [-] to select ON or OFF . When there is an event, the screen display will switch to a full screen of the corresponding channel. 3.[EVENT]  Use [+] and [-] to sel ...

  • Hitachi JPEG2000 - page 33

    JPEG2000 S t and alone DVR User Guide - 33 - 4-3-8 Password setup The p assword consist s of 1 to 8 digits. Press the number keys on the front panel to enter the password and you can use any co mbination of the numbers from 1 to 10 . 1.[USER ID]  Press e or f to set User ID. 2.[USER PW]  Key in the current password. 3.[NEW PW]  Key in the ...

  • Hitachi JPEG2000 - page 34

    JPEG2000 S t and alone DVR User Guide - 34 - 4-4 Record setup 1.[RECORD CONFIGURA TION]  Set up overwrite, recording mode, pict ure quality , resolution, and recording speed. 2.[SCHEDULE SETUP]  Program the recording schedule. 3.[HOLIDA Y SETUP]  Set up holidays, max. 100 days. 4-4-1 Record configuration Use [UP] and [DOWN] to select an it ...

  • Hitachi JPEG2000 - page 35

    JPEG2000 S t and alone DVR User Guide - 35 - 4.[RESOLUTION]  By lowering the resolution, the DV R gains the recording speed but the recorded pictures becom smaller . Video system Full Mode Dual Mode Quad Mode NTSC 60IPS@720*240 120IPS@360*240 240IPS@360*120 4CH P AL 50IPS@720*288 100IPS@360*288 200IPS@360*144 NTSC 120IPS@720*240 240IPS@360*240 4 ...

  • Hitachi JPEG2000 - page 36

    JPEG2000 S t and alone DVR User Guide - 36 - 4-4-2 Schedule record Program a recording schedule throught out the year .  MODE : Press MODE to select an editing mode. Use the direction keys  to move the cursor , and then press [+] and [-] to select a recording mode. The editing modes are as below: TIME CELL : Program the schedule at a ...

  • Hitachi JPEG2000 - page 37

    JPEG2000 S t and alone DVR User Guide - 37 - 4-4-3 Holiday setup Set up the holidays through out the year . Y ou can program up to 100 days as holidays. The recording schedule of the ho lidays is the same as the settings of Sunday .  Press MODE and set the editing mode as EDIT HOLIDA Y . Use direction key  to select and press ENTER t ...

  • Hitachi JPEG2000 - page 38

    JPEG2000 S t and alone DVR User Guide - 38 - 4-6 External device 1.[TCP/IP SETUP]  Set up the DVR’s TCP/IP information. 2.[RS232C SETUP]  Set up the parameters of the RS232 port. 3.[P ANTIL T SETUP]  Set up the parameters of the PTZ control. 4-6-1 TCP/IP setup < I P C O N F I G S E T U P > < DDNS SETUP > < C O N N E C T I ...

  • Hitachi JPEG2000 - page 39

    JPEG2000 S t and alone DVR User Guide - 39 - [IP CONFIG SETUP] Press ENTER to enter a selection. Use  to move the cursor . Use [+] [-] or J.Shuttle to change the value, and press EN TER to confirm the setting and exit the selection. Use  to go to another selection and repeat the previous steps. 1.[MAC ADDRESS]  Indicate the DVR’s M ...

  • Hitachi JPEG2000 - page 40

    JPEG2000 S t and alone DVR User Guide - 40 - [CONNECTION SETUP] U s e  to select and [+] [-] or J.Shuttle to change the value. 1.[TIMEOUT]  Set up the remote connection response ti me, if the client does not receive responses from the DVR for certain dur ation, the client will disconnect the connection and try again. The setup r ange is fr ...

  • Hitachi JPEG2000 - page 41

    JPEG2000 S t and alone DVR User Guide - 41 - 4-6-3 Pantilt setup < COMMAND SETUP > < SPEED SETUP > [COMMAND SETUP] Press  to select and [+] / [-] to change the value. 1.[CHANNEL]  Select PTZ channel. 2.[MODEL]  Select PTZ protocol. 3.[PTZ ID]  Select PTZ ID. 4.[BUADRA TE]  Select Baud Rate of PTZ control code. 5.[CMD D ...

  • Hitachi JPEG2000 - page 42

    JPEG2000 S t and alone DVR User Guide - 42 - [SPEED SETUP] Press  to select and [+] / [-] to change the value. 1.[P AN SPEED]  Set the P ANing speed. 2.[TIL T SPEED]  Set the TIL T ing speed. 3.[ZOOM SPEED]  Set the speed of ZOOM IN/OUT . 4.[FOCUS SPEED]  Set the speed of FOCUS NEAR/F AR. 4-7 Factory default Press  to sele c ...

  • Hitachi JPEG2000 - page 43

    JPEG2000 S t and alone DVR User Guide - 43 - 5-1 Dat a backup 1.[HDD]  Indicate the start and the end recording date and time of the HDD(s). 2.[CD-R]  Select a starting date and time for backup. Press ENTER and use ef to move the cursor . Use [+] [-] or J.Shuttle to change the value. Press ENTER and then d to go to SIZE to choose a backup siz ...

  • Hitachi JPEG2000 - page 44

    JPEG2000 S t and alone DVR User Guide - 44 - 5-2 CD Player sof t w are installation 1.Insert software CD. 2. Click [Inst all CD-R backup player] to start the installation. 3. Select a Destination Folder 4. Copy files to the Destination Folder . System will build a new icon of [CD BACKUP PLA YER] on PC [DESKTOP]. Double click the icon of CD Backup P ...

  • Hitachi JPEG2000 - page 45

    JPEG2000 S t and alone DVR User Guide - 45 - 5-3 CD Player sof t w are interface 1.Display screen: T o display the backup image 2.T ime display: T o indicate the current time 3.Information window: T o indicate the CD’s st art/end time and date, and the backup video quality (resolution). 4.S peed Adjustment: S peed: Select a playback speed (2X, 4X ...

  • Hitachi JPEG2000 - page 46

    JPEG2000 S t and alone DVR User Guide - 46 -  Open AJP file 1. Select (OPEN) and the window below will show up on the screen. 2. Select the file and click [OPEN] to open the AJP file.  Save JPG file 1. During playback and under FULL SCREEN MODE, when y ou see the picture you want to save, click EDIT . 2. Select [SA VE] to save the picture as ...

  • Hitachi JPEG2000 - page 47

    JPEG2000 S t and alone DVR User Guide - 47 - 6-1 PTZ camera Inst allation 6-1-1 Connection Setup  Connect the PTZ’s D+ to the DVR’s D+, and D- to D-. 6-1-2 PTZ setup [EXTERNAL DEVICE]  SYSTEM MENU ` EXTERNAL DEVICE ` P ANTIL T SETUP ` COMMAND SETUP 1. [MODEL]: select a PTZ protocol. 2. [PTZ ID]: enter the PTZ’s ID / address. 3. [BAUD RA ...

  • Hitachi JPEG2000 - page 48

    JPEG2000 S t and alone DVR User Guide - 48 - 6-2 PTZ camera operation Use MENU and NEXT key to select a PTZ command, and [+] [-] to select the channel. Then, press PTZ key to enter the PTZ control mode.  Indicate the channel connected with a PTZ camera.  Indicate PTZ command, press ENTER to send control code by PTZ key .  Y ou can also pre ...

  • Hitachi JPEG2000 - page 49

    JPEG2000 S t and alone DVR User Guide - 49 - 7-1 Network Introduction  Users have to indentify what kind of In ternet access they have before they set up the DVR’s network p arameters. DSL and cable modem are the most popular broadband technologies.  ADSL- Asymmetric Digital Subscriber Line ADSL is one of xDSL technologies, tr ansmitting di ...

  • Hitachi JPEG2000 - page 50

    JPEG2000 S t and alone DVR User Guide - 50 - 7-2-2 V ia ADSL First, identiry if you have S tatic IP or Dynamic IP serv ice. If you do not know , ask your ISP (Internet Service Provider). If you have S tatic IP , your ISP should prov ide you a st atic IP address, which will never change even when you reboot your modem. [Via ADSL with S tatic IP addr ...

  • Hitachi JPEG2000 - page 51

    JPEG2000 S t and alone DVR User Guide - 51 - [Via ADSL with Dynamic IP]  If you have ADSL with Dynamic IP addre ss, the network administrator assigns you an IP address from their pool when y ou or your ISP reboots the network and you may get a different IP address from time to time.  If you are using ADSL service with Dynam ic IP , you must a ...

  • Hitachi JPEG2000 - page 52

    JPEG2000 S t and alone DVR User Guide - 52 - 7-3 Router setup  There is a wide selection of routers in the market. They may be very dif ferent in terms of confi guration and operation. Here is an example of how to set up a router . For details, please read your router ’s manual.  First, connect a computer to the router for configuration. In ...

  • Hitachi JPEG2000 - page 53

    JPEG2000 S t and alone DVR User Guide - 53 - [PPPoE setup] Select PPPoE in W AN connection T ype Enter User Name and Passward provided by your ISP The router will get the IP address u pon c onne ction. In this example, we get the IP address of 21 1.20.82.39. 2. [V irtual server setup] Enter Virtual Server setup. Enter DVR’s IP (192.168.1.53) and ...

  • Hitachi JPEG2000 - page 54

    JPEG2000 S t and alone DVR User Guide - 54 - 7-4 Client sof tware 7-4-1 Inst all and setup Insert the Install CD into CD-ROM, and the computer will auto-run the Install program. W e suggest installing the software on Windows XP or Windows 2000. 1.[Install Client sof tware] Click [Install Client sof tware]. 7-4-2 Inst all Client sof tware Select a D ...

  • Hitachi JPEG2000 - page 55

    JPEG2000 S t and alone DVR User Guide - 55 - 7-4-3 Sof tware operation [Remote viewer interface] 1.[Live Display ] Remote DVR Live display 2.[Current St atus ] T o show the current status 3.[PTZ Camera Control ] T o control PTZ Camera Zoom/Focus/Direction ※ Remote Control of PTZ: 1) Set up PTZ at DVR first 2) Set up PTZ from the Client Software 4 ...

  • Hitachi JPEG2000 - page 56

    JPEG2000 S t and alone DVR User Guide - 56 - 7-4-4 Client sof tware setup [IP/PORT] 1.[DVR NAME] Enter the DVR’s location or name 2.[IP LIST]  Show the list of saved DVR IP addresses. If you are connecting to a DVR in this list, you can simply click it from the list, enter the DVR Admin’s password, and press SA VE and then OK. Click CONNECT ...

  • Hitachi JPEG2000 - page 57

    JPEG2000 S t and alone DVR User Guide - 57 - [DDNS] 1.[Group] Enter Group name registered on DDNS Server . Please refer to 7-5 DDNS setup and operation for det ails. 2.[DVR Name] Enter DVR name registere d on DDNS Server . If the DVR name is entered and saved before, click LOAD to browse the list. 3.[Save/Load] Save: Save the setup into the DDNS li ...

  • Hitachi JPEG2000 - page 58

    JPEG2000 S t and alone DVR User Guide - 58 - [PTZ/SA VE] 1.[Circular Monitoring Interval] Set up a sequential switch interval. 2.[Scan Rate] Select a Fast forward (FF) speed of remote Playback. 3.[PTZ T ype] Select the protocol used by your PTZ camera. 4.[PTZ Baudrate]  Select a PTZ camera buad rate. 5.[Set Path to Save Reorded Images] Set a pat ...

  • Hitachi JPEG2000 - page 59

    JPEG2000 S t and alone DVR User Guide - 59 - 7-4-6 Remote playback  When the DVR is connected, cli ck [PLA YBACK] to enter Playback interface. [ Remote Playback Interface ] 1.[Playback Picture]  T o show the playback video 2.[T ime/Date Selection]  T o select time/date of playback 3.[Record and Playback S tatus]  ST ART – T o show the ...

  • Hitachi JPEG2000 - page 60

    JPEG2000 S t and alone DVR User Guide - 60 - [Search button] 1. Fast Reward (RW) 2. Fast Forward (FF) 3. RW (S peed 1X) 4. S top / Pause 5. Playback (S peed 1X) 6. Go to the beginning of recording 7. Jump to the previous hour 8. Jump to the next hour 9. Go to the end of recording [Remote Playback Operation]  Drag the mouse over the time bar to s ...

  • Hitachi JPEG2000 - page 61

    JPEG2000 S t and alone DVR User Guide - 61 - 7-4-7 Back up via Client sof tware  Save the recorded data as single JPEG picture or A VI format. [Save the recorded data as single JPEG picture]  Press “STOP” right before where you want to save and press “SA VE”.  The picture will be saved to the assigned path which you set up in 7-4-4 ...

  • Hitachi JPEG2000 - page 62

    JPEG2000 S t and alone DVR User Guide - 62 - 7-5 DDNS setup and operation  DDNS SERVER setup 1. Connect to DDNS SERVER(http://advr .com.tw or http://59.124.143.151 ) by IE browser  Select [REGISTER] to register a new account 2. Add a new account  Group: Add a new user name User Password: Add user password Confirm Password: Confirm the pass ...

  • Hitachi JPEG2000 - page 63

    JPEG2000 S t and alone DVR User Guide - 63 - 4. Select “ADD DVR” to add DVR information 5. Add DVR information:  DVR NAME: Set a DVR name MAC ADDRESS: Enter the DVR’s MAC address. DVR’ s MAC address can be found in DVR’ s [SYSTEM MENU] f [EXTERNAL DEVICE] f [TCP/IP SETUP] f [IP CONFIG SETUP] IP: Enter the DVR’s current IP address POR ...

  • Hitachi JPEG2000 - page 64

    JPEG2000 S t and alone DVR User Guide - 64 -  DVR setup 1. The DVR setup is a onetime ef fort. First, make sure your DVR can be accessed over the Internet. Please refer to 7-2 Netw ork inst allation and setup for det ails. 2. Go to [SYSTEM MENU] f [ [EXTERNAL DEVICE] f [TCP/IP SETUP] f [DDNS SETUP]  DDNS ON/OFF: Press ENTER to turn ON the DDN ...

  • Hitachi JPEG2000 - page 65

    JPEG2000 S t and alone DVR User Guide - 65 - 2. Select DDNS in [IP/PORT] setup 3.Go to DDNS setup [DDNS INFO]  GROUP : Enter Group nameregistered on DDNS Server .  DVR NAME : Enter DVR name registered on DDNS Server . If the DVR name is entered and saved before, click LOAD to browse the list.  Save/Load : Save: Save the setup into the DDNS ...

  • Hitachi JPEG2000 - page 66

    JPEG2000 S t and alone DVR User Guide - 66 -  Configuration of DDNS connection 1. DVR connect to DDNS server automatic ally and update the IP address by it self. 2. The client accessesto DDNS server and requests IP address from DDNS server . 3. DDNS server replies the DVR’s IP address and port number . 4. Client PC connects to DVR.    ...

  • Hitachi JPEG2000 - page 67

    JPEG2000 S t and alone DVR User Guide - 67 - Users can also a ccess to t he DVR fro m Internet Explore for remote viewin g, remote backup, and playback the backup file. Log on to DDNS server and go to the DVR List  Remote Live V iew via IE Brow ser  Click WEB to link to your DVR 1.[Live picture]  Shows the live pictures of DVR 2.[DVR info] ...

  • Hitachi JPEG2000 - page 68

    JPEG2000 S t and alone DVR User Guide - 68 - PTZ: Select the protocol BAUDRA TE: Select the baud rate C H : S e l e c t t h e I D o f P E Z c a m e r a Z O O M : Z o o m i n / o u t FOCUS: Focus near/far IRIS: IRIS open/close  Web Network Backup  Click “Backup” to open the web page “W eb Network Backup” 1.Backup Information:  IP Ad ...

  • Hitachi JPEG2000 - page 69

    JPEG2000 S t and alone DVR User Guide - 69 - 2. Function setup:  Connect T e st: T o test the connection status Unlock: T o get the record start/End time of DVR Set Backup T ime: Set the start/end time, size and path of file backup S tart Backup: Active the backup function 3. The information of DVR Server:  Recorded S tart T ime: Indicate the ...

  • Hitachi JPEG2000 - page 70

    JPEG2000 S t and alone DVR User Guide - 70 -  Play backup file  Click [Backup Player] to open the web page of “Backup Player” 1. Display the backup image 2. Indicate the present time of monitoring 3. Indicate the start/end time of backup file 4. Switch to the different modes of multi-screen 5. Channel selection: Ch1~Ch16 6. SPEED: Adjust ...

  • Hitachi JPEG2000 - page 71

    JPEG2000 S t and alone DVR User Guide - 71 - 8. Function keys:  OPEN: Open the backup file EDIT : Edit the backup image A VI SA VE: T o save the A VI file EXIT : Log out the program 9. audio options:  ON: T o start the audio function Ch1~4: to select the channel with audio  Save A VI file: 1. Click to open the backup file and select single ...

  • Hitachi JPEG2000 - page 72

    JPEG2000 S t and alone DVR User Guide - 72 - [4ch DVR] ※ The numbers are for reference only . ※ The recording duration is caculated under the continuous recording mode (Record speed :1/1X) Appendix.1 Record time t a ble ...

  • Hitachi JPEG2000 - page 73

    JPEG2000 S t and alone DVR User Guide - 73 - [8/16ch DVR] ※ The numbers are for reference only . ※ The recording duration is caculated under the continuous recording mode (Record speed :1/1X) ...

  • Hitachi JPEG2000 - page 74

    JPEG2000 S t and alone DVR User Guide - 74 - Appendix.2 System configuration ...

  • Hitachi JPEG2000 - page 75

    JPEG2000 S t and alone DVR User Guide - 75 -  Install USB driver 1. Connect USB port between PC and DVR 2. Press and hold Search and Play keys on front panel and power on DVR 3. The DVR beeps for a moment. 4. When the Windows system detect new device, please select [Install fr om a list or specific location] 5. Select the location of USB driver ...

  • Hitachi JPEG2000 - page 76

    JPEG2000 S t and alone DVR User Guide - 76 - 7. S tart to copy the driver to Windows system. 8. After installation, the USB device [BulkUsb.Sys Usb Bulk I/O Driver] can be found from [Device Manager]. ...

  • Hitachi JPEG2000 - page 77

    JPEG2000 S t and alone DVR User Guide - 77 -  Install USB upgrade program  Insert the Install CD 1.Please select :[Install USB upgrade program(Allupdate) 2. Set up Directory ※ (default Directory : "C:Program FilesJ2000Allupdate") After installation, there’ll be a shortcut on desktop. Click on it for remote viewing. ...

  • Hitachi JPEG2000 - page 78

    JPEG2000 S t and alone DVR User Guide - 78 -  Upgrade firmware  Up date procedures  Ste p 1 、 Update BOOT 1. Connect the USB port between DVR and PC. (Do not power on DVR in advance) 2. Execute USB update program AUDTOT AL ， select “Boot” then choose t he file: _FBoot_0000_16M_V2.04.bin 3. Press and hold SEARCH and PLA Y and power ...

  • Hitachi JPEG2000 - page 79

    JPEG2000 S t and alone DVR User Guide - 79 -  Ste p 2 、 Update F/W 1. Select ALLUPDA TE then choose the file: _ALLUPDA TE_4J_NTIC_noboot_V1.3.bin 2. Press and hold SEARCH and PLA Y and power on the DVR 3. When the DVR is turned on, you will hear very shor t beeps. Keep holding the “SEARCH” and “PLA Y” buttons. When the beep s turn slow ...

  • Hitachi JPEG2000 - page 80

    JPEG2000 S t and alone DVR User Guide - 80 -  Introduction PLA Y ONL Y MODE can be used in the following situations:  When you need to playback a hard drive from another DVR  When you need to playback the video which you deleted by running HDD CLEAR  Enter “PLA Y ONL Y MODE”  Turn on the DVR. At the initial screen that says HDD D ...

Manufacturer Hitachi Category DVR

Documents that we receive from a manufacturer of a Hitachi JPEG2000 can be divided into several groups. They are, among others:
- Hitachi technical drawings
- JPEG2000 manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi JPEG2000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi JPEG2000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi JPEG2000, service manual, brief instructions and user manuals Hitachi JPEG2000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi JPEG2000.

Similar manuals

A complete manual for the device Hitachi JPEG2000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi JPEG2000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi JPEG2000.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi JPEG2000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi JPEG2000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi JPEG2000, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi JPEG2000 - which should help us in our first steps of using Hitachi JPEG2000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi JPEG2000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi JPEG2000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi JPEG2000?

Use the form below

If you did not solve your problem by using a manual Hitachi JPEG2000, ask a question using the form below. If a user had a similar problem with Hitachi JPEG2000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)