-
Hanns.G HSG 1088/ HSG 1083 - page 1
HSG 1085/ HSG 1084 HSG 1088/ HSG 1083 HSG 1082/ HSG 1081 HZ194/HZ201 HZ221/HZ231 HZ251/HZ281 ...
-
Hanns.G HSG 1088/ HSG 1083 - page 2
User ’ s Manual 2 Before operating the monitor, please read this ma nual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interfer ence S tatement This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are desi ...
-
Hanns.G HSG 1088/ HSG 1083 - page 3
User ’ s Manual 3 Model: HZ251 & HZ281 Congratulations! The product you have just purchased carries the TCO’06 Media Displays label. This means that your disp lay is designed and manufactured according to some of the strictest pe rform ance and environmental criteria in the world. The manufac turer of this display ha s selected it to be cer ...
-
Hanns.G HSG 1088/ HSG 1083 - page 4
User ’ s Manual 4 RECYCLING INFORMATION We, the Hanns.G care very much about our environment prot ection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, whic h can be re -decomposed and re-inte ...
-
Hanns.G HSG 1088/ HSG 1083 - page 5
User ’ s Manual 5 T ABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 6 PRECAUTIONS ................................................................................................. 6 SPECIAL NOTES ON LCD MONITORS ...................................................... ...
-
Hanns.G HSG 1088/ HSG 1083 - page 6
User ’ s Manual 6 SAFETY NOTICE 1. The changes or modifications not expressly approved by the pa rty responsible for compliance could void the user's authority to operate the equipm ent. 2. Shielded interface cables and AC pow er cord, if any , must be used in order to comply with the emission limits. 3. The manufacturer is not respons ible ...
-
Hanns.G HSG 1088/ HSG 1083 - page 7
User ’ s Manual 7 SPECIAL NOTES ON LCD MONITORS The following symptoms are norm al with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the sc reen may flicker during initial use. T urn of f the Power Switch and then turn it on again to make sure the flicker disappears. • Y ou may find slightly uneven ...
-
Hanns.G HSG 1088/ HSG 1083 - page 8
User ’ s Manual 8 BEFORE YOU OPERA TE THE MONITOR FEA TURES Model: HZ1 94 HZ201 HZ221 HZ231 HZ251 HZ281 Size: 18.5”W ide 20”W ide 22”W ide 23”W ide 25”W i de 28”W ide Recommended Resolutions : 1366x 768 @60Hz 1600x 900 @60Hz 1680x1050 @60Hz 1920x 1080 @60Hz 1920x 1080 @60Hz 1920x1200 @60Hz • TFT Color LCD Monitor • Crisp, Clear Di ...
-
Hanns.G HSG 1088/ HSG 1083 - page 9
User ’ s Manual 9 INST ALLA TION INSTRUCTIONS INST ALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Place the monitor face down on a flat leveled surface. 2. Align the monitor with the opening in the base. 3. Turn the screw clockwise to atta ch the base to the monitor. (The screw is attached on the base for model HZ1 94 , HZ ...
-
Hanns.G HSG 1088/ HSG 1083 - page 10
User ’ s Manual 10 MAKING CONNECTIONS CONNECTING TO A PC T urn of f your computer before performing the procedure below . 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer ’ s D-Sub port. 2. Connect one end of the DV I-D or HDMI to DVI cable (optional) to the back of the monitor an d connec ...
-
Hanns.G HSG 1088/ HSG 1083 - page 11
User ’ s Manual 11 ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the m onitor , then adjust the monitor ’ s angle to your own preference. • Hold the stand so you do not topple the m on itor when you change the monitor ’ s angle. • Y ou are able to adjust the monitor ’ s angle from -5 ? ...
-
Hanns.G HSG 1088/ HSG 1083 - page 12
User ’ s Manual 12 OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or of f. The other control butt ons are located on the front panel of the monitor (See Figu re 4). By changing these settings, the picture can be adjuste d to your personal preferences. • The power cord should be connected. • Connect ...
-
Hanns.G HSG 1088/ HSG 1083 - page 13
User ’ s Manual 13 FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF of m onitor ’ s power . • Power Indicator: Green — Power On mode. Orange — Power Saving mode. • MENU / RETURN: 1. T urn the OSD menu on/of f or re turn to the previous menu. 2. Exit OSD menu when in volume OSD status. • Adjust ▲▼ : 1. Adju ...
-
Hanns.G HSG 1088/ HSG 1083 - page 14
User ’ s Manual 14 Resolution 640x400@70Hz ↔ 720x400@70Hz 640x400@85Hz ↔ 720x400@85Hz 640x480@60Hz ↔ 720x480@60Hz 1024x768@70Hz ↔ 1280x768@70Hz 1280x768@60Hz ↔ 1360x768@60Hz 1360 x 768@60Hz ↔ 1366 x 768@60Hz 1440 x 900@60Hz ↔ 160 0x 900@60Hz 1400x1050@60Hz ↔ 1680x1050@60Hz 1400x1050@RB 60Hz ↔ 1680x1050@RB 60Hz 1400x1050@75Hz ↔ ...
-
Hanns.G HSG 1088/ HSG 1083 - page 15
User ’ s Manual 15 HOW T O ADJ UST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference. Select 「 CONTRAST 」 option to adjust the contras ...
-
Hanns.G HSG 1088/ HSG 1083 - page 16
User ’ s Manual 16 H-POSITION Select the 「 H-POSITION 」 option to shift the scre en image to the left or right. Enter the op tion and adjust the level. [For VGA only] V - POSITION Select the 「 V -POSITION 」 option to shift the screen image up or down. Enter the option and adjust the level. [For VGA only] CLOCK Select the 「 CLOCK 」 opt ...
-
Hanns.G HSG 1088/ HSG 1083 - page 17
User ’ s Manual 17 OSD COLOR T o choose the color combination of the OSD window , select 「 OSD COLOR 」 option under 「 OSD SETTING 」 menu, choose modes 1/2/3. SYSTEM AUDIO INPUT While transferring v ia the HDMI port, it is recommended to set AUDIO INPUT to HDMI; if no sound is outputted, it is recommended to select AUDIO INPUT as PC, and m ...
-
Hanns.G HSG 1088/ HSG 1083 - page 18
User ’ s Manual 18 PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capa bilities according to the VESA DDC ST ANDAR D. It allows the monitor to inform the host system of its identity and, depe nding on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bid ...
-
Hanns.G HSG 1088/ HSG 1083 - page 19
User ’ s Manual 19 TECHNICAL SUPPOR T (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible. *Check if the V ideo Card is Plug & Play compatibl ...
-
Hanns.G HSG 1088/ HSG 1083 - page 20
User ’ s Manual 20 INPUT as a PC option, and make sure PC audio output cable is connected to monitor’s LINE IN port(or AUDIO IN port) . [For HDMI Input only] ...
-
Hanns.G HSG 1088/ HSG 1083 - page 21
User ’ s Manual 21 ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connect ed, If the connector is loose, tighten the connector ’ s screws. 2. Check the signal-cable’ s connection pins for damage. INPUT NOT SUPPOR T : Your computer has been set to unsuitable displa y mode, set th ...
-
Hanns.G HSG 1088/ HSG 1083 - page 22
User ’ s Manual 22 28 1440×900 @60H z 64.981 60.05 ▲ ▲ ▲ ▲ ▲ 29 1440×900 @75H z 66.981 75.07 ▲ ▲ ▲ ▲ ▲ 30 1400×1050 @6 0Hz 64.744 59.948 ▲ 31 1600×900 @60H z 5 5.54 59.978 ▲ ▲ 32 1680×1050 @6 0Hz 65.29 59.954 ▲ ▲ ▲ 33 1920×1080 @6 0Hz 66.587 59.934 ▲ ▲ ▲ 34 1920×1200 @6 0Hz 74.038 59.95 ▲ (V ideo mod ...
-
Hanns.G HSG 1088/ HSG 1083 - page 23
User ’ s Manual 23 APPENDIX SPECIF ICA TIO NS HZ1 94 LCD Panel Driving system TFT Color LCD Size 18.5" W ide Pixel pitch 0.3mm(H) x 0.3mm(V) V ideo H-Frequency 24KHz – 61KHz V - Frequency 56– 75Hz Display Colors 16.7M Colors Max. Resolution 1366 x 768 @60Hz Plug & Play VESA DDC 2B TM , DPMS Power consumption ON Mode 28W (T ypical) Po ...
-
Hanns.G HSG 1088/ HSG 1083 - page 24
User ’ s Manual 24 SPECIF ICA TIO NS HZ201 LCD Panel Driving system TFT Color LCD Size 20" W ide Pixel pitch 0.276mm(H) x 0.276mm(V) V ideo H-Frequency 24KHz – 70KHz V - Frequency 56 – 75Hz Display Colors 16.7M Colors Max. Resolution 1600 x 900 @60Hz Plug & Play VESA DDC 2B TM , DPMS Power consumption ON Mode 35W (T ypical) Power Sav ...
-
Hanns.G HSG 1088/ HSG 1083 - page 25
User ’ s Manual 25 SPECIF ICA TIO NS HZ221 LCD Panel Driving system TFT Color LCD Size 22" W ide Pixel pitch 0.282mm(H) x 0.282mm(V) V ideo H-Frequency 24KHz – 83KHz V - Frequency 56 – 75Hz Display Colors 16.7M Colors Max. Resolution 1680 x 1050 @60Hz Plug & Play VESA DDC 2B TM , DPMS Power consumption ON Mode 35W (T ypical) Power Sa ...
-
Hanns.G HSG 1088/ HSG 1083 - page 26
User ’ s Manual 2 6 SPECIF ICA TIO NS HZ231 LCD Panel Driving system TFT Color LCD Size 23" W ide Pixel pitch 0.265mm(H) x 0.265mm(V) V ideo H-Frequency 24KHz – 83KHz V - Frequency 56 – 75Hz Display Colors 16.7M Colors Max. Resolution 1920 x 1080 @60Hz Plug & Play VESA DDC 2B TM , DPMS Power consumption ON Mode 35W (T ypical) Power S ...
-
Hanns.G HSG 1088/ HSG 1083 - page 27
User ’ s Manual 2 7 SPECIF ICA TIO NS HZ251 LCD Panel Driving system TFT Color LCD Size 25" W ide Pixel pitch 0.283mm(H) x 0.283mm(V) V ideo H-Frequency 24KHz – 83KHz V - Frequency 56 – 75Hz Display Colors 16.7M Colors Max. Resolution 1920 x 1080 @60Hz Plug & Play VESA DDC 2B TM , DPMS Power consumption ON Mode 48W (T ypical) Power S ...
-
Hanns.G HSG 1088/ HSG 1083 - page 28
User ’ s Manual 2 8 SPECIF ICA TIO NS HZ281 LCD Panel Driving system TFT Color LCD Size 28" W ide Pixel pitch 0.309m m (H) x 0.309mm(V) V ideo H-Frequency 24KHz – 80KHz V - Frequency 56 – 75Hz Display Colors 16.7M Colors Max. Resolution 1920 x 1200 @60Hz Plug & Play VESA DDC 2B TM , DPMS Power consumption ON Mode 95W (T ypical) Power ...
Do you have a question concerning Hanns.G HSG 1088/ HSG 1083?
Use the form below
If you did not solve your problem by using a manual Hanns.G HSG 1088/ HSG 1083, ask a question using the form below. If a user had a similar problem with Hanns.G HSG 1088/ HSG 1083 it is likely that he will want to share the way to solve it.