English dropdown-ico

Manual Patton electronic Model 2604

148 pages 4.95 mb
Download

Go to site of 148

Summary
  • Patton electronic Model 2604 - page 1

    Model 2604 T1/E1 Digital Access and Cross-Connect System (DACS) Administrator ’ s Reference Guide Sales Office: +1 (301) 975-1000 T echnical Support: +1 (301) 975-1007 E-mail: support@patton.com WWW : www .patton.com Document Number: 110051UA Rev . A Part Number: O7MD2604DACS-ARG-A Revised: February 20, 2002 ...

  • Patton electronic Model 2604 - page 2

    P atton Electronics Company , Inc. 7622 Rickenbacker Drive Gaithersburg, MD 20879 USA V oice: +1 (301) 975-1000 F ax: +1 (301) 869-9293 T echnical S upport: +1 (301) 975-1007 T echnical S upport e-mail: support@patton.com WWW : www .patton.com Copyright © 2001, P atton Electronics Company . All rights reserved. The information in this document is ...

  • Patton electronic Model 2604 - page 3

    1 Contents About this guide ...................................................................................................................................................13 Audience............................................................................................................................................................... 13 S ...

  • Patton electronic Model 2604 - page 4

    Contents DSL DACS Administrators’ Reference Guide 2 Alarm Name .............................................................................................................................................32 Alarm Time .................................................................................................................................. ...

  • Patton electronic Model 2604 - page 5

    3 DSL DACS Administrators’ Reference Guide Contents Carrier Sense Errors (dot3StatsCarrierSenseErrors) .........................................................................................47 Received Frames Too Long (dot3StatsFrameTooLongs) .................................................................................47 Other Received Erro ...

  • Patton electronic Model 2604 - page 6

    Contents DSL DACS Administrators’ Reference Guide 4 Default Time-To-Live (ipDefaultTTL) ...........................................................................................................62 Total Datagrams Received (ipInReceives) .......................................................................................................62 Disc ...

  • Patton electronic Model 2604 - page 7

    5 DSL DACS Administrators’ Reference Guide Contents Info (ipRouteInfo) ..........................................................................................................................................69 IP Routing Destination window .......................................................................................................... ...

  • Patton electronic Model 2604 - page 8

    Contents DSL DACS Administrators’ Reference Guide 6 Others Received with No Delivery (udpInErrors) ...........................................................................................80 Sent (udpOutDatagrams) ................................................................................................................................80 L ...

  • Patton electronic Model 2604 - page 9

    7 DSL DACS Administrators’ Reference Guide Contents Get Next Requests (snmpInGetNexts) ............................................................................................................92 Set Requests (snmpInSetRequests) ..................................................................................................................92 ...

  • Patton electronic Model 2604 - page 10

    Contents DSL DACS Administrators’ Reference Guide 8 Free (boxHeapFreeSpace) ........................................................................................................................100 Largest (boxHeapLargestSpace) ...............................................................................................................100 Enc ...

  • Patton electronic Model 2604 - page 11

    9 DSL DACS Administrators’ Reference Guide Contents Daemons ......................................................................................................................................................109 SysLog Daemon IP Address(syslogDaemonIP) ........................................................................................109 S ...

  • Patton electronic Model 2604 - page 12

    Contents DSL DACS Administrators’ Reference Guide 10 Receive Equalizer (linkRxEqualizer) ........................................................................................... .............124 Line Build Out (linkLineBuildOut) ........................................................................................................124 Yellow A ...

  • Patton electronic Model 2604 - page 13

    11 DSL DACS Administrators’ Reference Guide Contents Line Code Violations (dsx1TotalLCVs) ........................................................................................................131 Far End Line Statistics—Current..................................................................................................................... ...

  • Patton electronic Model 2604 - page 14

    Contents DSL DACS Administrators’ Reference Guide 12 20 License ......................................................................................................................................................... 143 Introduction ................................................................................................................. ...

  • Patton electronic Model 2604 - page 15

    13 About this guide This guide describes configuring a P atton Electronics digital cross connect (DACS). This section describes the following: • Who should use this guide (see “ A udience ”) • Ho w this document is organized (see “S tr ucture ”) • T ypographical conventions and terms used in this guide (see “T ypographical conventi ...

  • Patton electronic Model 2604 - page 16

    About this guide T1/E1 DACS Administrators’ Reference Guide 14 • Chapter 17 describes configuring the T1/E1Link window • Chapter 18 describes configuring the T1/E1 Assignment window • Chapter 19 describes the contents of the About windo w • Chapter 20 describes the contents of the License window • Appendix A contains a table with the ...

  • Patton electronic Model 2604 - page 17

    15 T1/E1 DACS Administrators’ Reference Guide About this guide Mouse conventions The following conventions ar e used when describing mouse actions: T able 2. Mouse conventions Convention Meaning Left mouse button This button refers to the primar y or leftmost mouse button (unless you have changed the default configuration). Right mouse button Th ...

  • Patton electronic Model 2604 - page 18

    About this guide T1/E1 DACS Administrators’ Reference Guide 16 ...

  • Patton electronic Model 2604 - page 19

    17 Chapter 1 Introduction Chapter contents Introduction ..........................................................................................................................................................18 Logging into the HTTP/HTML Administration Pages ......................................................................................... ...

  • Patton electronic Model 2604 - page 20

    1 • Introduction T1/E1 DACS Administrators’ Reference Guide 18 Introduction Introduction Y ou may configure the digital cr oss connect (DACS) by using its internal HTTP/HTML Administration P ages. Howev er , to enter into the HT TP/HTML pages, you must first define the LAN Address T echnique, LAN IP Address, and LAN Subnet M ask for the DACS ...

  • Patton electronic Model 2604 - page 21

    Saving HTTP/HTML Object Changes 19 T1/E1 DACS Administrators’ Reference Guide 1 • Introduction Saving HTTP/HTML Object Changes Sometimes you will need to sav e changes that you have made in the HTTP/HTML pages. Do the follo wing to make changes to read/write variables: 1. Select the appropriate Modify screen. 2. Make changes to the desired para ...

  • Patton electronic Model 2604 - page 22

    1 • Introduction T1/E1 DACS Administrators’ Reference Guide 20 Saving HTTP/HTML Object Changes ...

  • Patton electronic Model 2604 - page 23

    21 Chapter 2 Home Chapter contents Introduction ..........................................................................................................................................................22 Operating Status Variables ...................................................................................................................... ...

  • Patton electronic Model 2604 - page 24

    2 • Home T1/E1 DACS Administrators’ Reference Guide 22 Introduction Introduction This chapter describes the HOME window—the first Administration Page that you see after logging into the DACS (see figure 3). F rom HOME , you can monitor current systems status, save any system configuration changes, or reset the system without pow er-cycling ...

  • Patton electronic Model 2604 - page 25

    Operating Status Variables 23 T1/E1 DACS Administrators’ Reference Guide 2 • Home Operating Status V ariables There are sev en system variables which describe the immediate operating status of the DACS. These variables are shown in figur e 4 and are described in the follo wing sections. Figure 4. ST A TUS menu % CPU Idle (boxIdleTime) This is ...

  • Patton electronic Model 2604 - page 26

    2 • Home T1/E1 DACS Administrators’ Reference Guide 24 Immediate Actions 2. Without clicking on Record Current Configuration , all configuration changes will be lost if the po wer is recycled. After doing the Record Curr ent Configuration save, the current configuration of the DA CS will not be lost with power cy cling. Note The most import ...

  • Patton electronic Model 2604 - page 27

    25 Chapter 3 Impor t/Expor t Chapter contents Introduction ..........................................................................................................................................................26 Export Configuration ................................................................................................................. ...

  • Patton electronic Model 2604 - page 28

    3 • Import/Export T1/E1 DACS Administrators’ Reference Guide 26 Introduction Introduction The Import/Export function enables you to make a backup (or expor t ) copy of your DACS’ s configuration parameters. By exporting the configurations, the saved files can quickly be loaded, or imported , into a replace- ment DACS—greatly speeding up ...

  • Patton electronic Model 2604 - page 29

    Export Configuration 27 T1/E1 DACS Administrators’ Reference Guide 3 • Import/Export T o export the flash configuration, click on the Expor t Flash link on the Import/Expor t main page. The DACS will display text configuration information resembling that shown in figur e 7. Figure 7. T ypical DACS flash memor y configuration data ...

  • Patton electronic Model 2604 - page 30

    3 • Import/Export T1/E1 DACS Administrators’ Reference Guide 28 Import Configuration T o save the displayed data as a text file, select the Save option on your bro wser (see figure 8). F or example, under N etscape, select File > Save As . A dialog bo x will display enabling you to save the contents of the export parameters to a text file ...

  • Patton electronic Model 2604 - page 31

    29 Chapter 4 Alarms Chapter contents Introduction ..........................................................................................................................................................30 Displaying the alarms window .................................................................................................................. ...

  • Patton electronic Model 2604 - page 32

    4 • Alarms T1/E1 DACS Administrators’ Reference Guide 30 Introduction Introduction The DACS has an extensive alarm r eporting system which enables users to configure, monitor , and test major and minor alarms. The alarm system can be set to notify of equipment failures (for example, a power supply failure) or T1/E1 port malfunctions. There are ...

  • Patton electronic Model 2604 - page 33

    Displaying the alarms window 31 T1/E1 DACS Administrators’ Reference Guide 4 • Alarms The T1/E1 DACS M ultiplexer has four methods to notify an alarm condition: 1. F ront panel LED—The front panel ALARM LED has three states that indicate the presence and severity of an alarm. The states are: - Off—N o alarm present - Solid—M inor alarm - ...

  • Patton electronic Model 2604 - page 34

    4 • Alarms T1/E1 DACS Administrators’ Reference Guide 32 Displaying the alarms window Alarm Response Outputs Alarm Response Outputs display the curr ent setting for handling alarm notification via the different Alarm Response Outputs. T o change the Alarm Response Outputs parameters, refer to “ Alarm Parameters ” on page 33. Relay Response ...

  • Patton electronic Model 2604 - page 35

    Displaying the alarms window 33 T1/E1 DACS Administrators’ Reference Guide 4 • Alarms Alarm Time The Alarm Time column displays the number of seconds the alarm has been activ ated. Alarm Count The Alarm Count column indicates how many times the alarm has occurred and is useful for monitoring self- clearing alarms. Generate Alarm F or testing pu ...

  • Patton electronic Model 2604 - page 36

    4 • Alarms T1/E1 DACS Administrators’ Reference Guide 34 Modify Response—Configuring the alarm response system • Clear Alarm—Clearing the alarm resets the alarm, resets Time S ince Alarm to 0.00 seconds and resets Alarm Count to 0 (zero). T ypes of Alarms • Box Alarm G roup - Box: Over T emperature—When the internal box temperatur e e ...

  • Patton electronic Model 2604 - page 37

    Modify Alarms—Configuring alarm severity levels 35 T1/E1 DACS Administrators’ Reference Guide 4 • Alarms T emperature Threshold An alarm message is generated when the internal box temperature ex ceeds this threshold value (degr ees Cel- sius). Y ou can change the threshold temperature, but we r ecommend that you use the factory default. Modif ...

  • Patton electronic Model 2604 - page 38

    4 • Alarms T1/E1 DACS Administrators’ Reference Guide 36 Modify Alarms—Configuring alarm severity levels • MinorS elfClearing(3)—Generate a minor alarm that automatically clears after a fixed period of time. I f the alarm condition has not ceased, the alarm will be automatically cleared, but another alarm will be immedi- ately generated. ...

  • Patton electronic Model 2604 - page 39

    37 Chapter 5 DS0 Mapping Chapter contents Introduction ..........................................................................................................................................................38 Displaying the DS0 Mapping window.............................................................................................. .......... ...

  • Patton electronic Model 2604 - page 40

    5 • DS0 Mapping T1/E1 DACS Administrators’ Reference Guide 38 Introduction Introduction One of the remote locations is the CP E’ s DACS. The second remote location is typically connected through some W AN port’ s time slots. For communication between these r emote locations they shall be connected together within the DACS. These connections ...

  • Patton electronic Model 2604 - page 41

    Displaying the DS0 Mapping window 39 T1/E1 DACS Administrators’ Reference Guide 5 • DS0 Mapping Help (DACS help information) Clicking on the Help button displays the DACS H elp Information windo w (see figure 14). The purpose of this window is to help the user learn ho w to add DS0 connections using the DACS HTML pages. This win- dow define a ...

  • Patton electronic Model 2604 - page 42

    5 • DS0 Mapping T1/E1 DACS Administrators’ Reference Guide 40 Displaying the DS0 Mapping window Device Slots The "slots" input identifies the DS0 channels—each DS0 channel is 64 kbps—that you would like to con- nect. Each time slot in a T1 or E1 W AN port has 24 or 31 DS0 channels, respectively . When selecting the slots you must ...

  • Patton electronic Model 2604 - page 43

    41 Chapter 6 Clocking Chapter contents Introduction ..........................................................................................................................................................42 Configuring the System Clock Settings........................................................................................................ ...

  • Patton electronic Model 2604 - page 44

    6 • Clocking T1/E1 DACS Administrators’ Reference Guide 42 Introduction Introduction Click on Clocking in the Configuration Menu to display the System Clocking Configuration main window (see figure 15). Figure 15. System Clocking Configuration window The Clocking window is where the primary and secondary clocking sources that synchronize al ...

  • Patton electronic Model 2604 - page 45

    Configuring the System Clock Settings 43 T1/E1 DACS Administrators’ Reference Guide 6 • Clocking • netref-1(101)—N/A • netref-2(102)—N/A • internal(200)— The internal free-running oscillator is the clock source. • external(300)—The external clock source connected to the 3-position terminal block on the rear of the 2604 DACS is t ...

  • Patton electronic Model 2604 - page 46

    6 • Clocking T1/E1 DACS Administrators’ Reference Guide 44 Configuring the System Clock Settings ...

  • Patton electronic Model 2604 - page 47

    45 Chapter 7 Ethernet Chapter contents Introduction ..........................................................................................................................................................46 Ethernet statistics ......................................................................................................................... ...

  • Patton electronic Model 2604 - page 48

    7 • Ethernet T1/E1 DACS Administrators’ Reference Guide 46 Introduction Introduction The DACS pro vides management and statistical information in the Ether net window (see figure 16). M ost of the descriptions for these MIB variables are from RFC 1643. D etailed information regar ding the SNMP MIB II variables may be downloaded fr om RFC 1643, ...

  • Patton electronic Model 2604 - page 49

    Ethernet statistics 47 T1/E1 DACS Administrators’ Reference Guide 7 • Ethernet ifOutU castPkts, ifOutM ulticastPkts, or ifOutBroadcastPkts, and is not counted by the corr esponding instance of the dot3S tatsM ultipleCollisionFrames object." Multiple Collision Frames (dot3StatsMultipleCollisionFrames) The number of successfully transmitted ...

  • Patton electronic Model 2604 - page 50

    7 • Ethernet T1/E1 DACS Administrators’ Reference Guide 48 Ethernet statistics Other Received Errors (dot3StatsInternalMacReceiveErr ors) The number of frames in which reception fails due to an internal MAC sublay er receive err or . A frame is only counted if it is not counted by either the dot3S tatsF rameT ooLongs object, the dot3StatsAlignm ...

  • Patton electronic Model 2604 - page 51

    49 Chapter 8 Filter IP Chapter contents Introduction ..........................................................................................................................................................50 Defining a filter .......................................................................................................................... ...

  • Patton electronic Model 2604 - page 52

    8 • Filter IP T1/E1 DACS Administrators’ Reference Guide 50 Introduction Introduction The DACS software pr ovides an IP filtering system that enables y ou to set up security for the internal manage- ment system. Each filter is a defined list of parameters based upon attributes in the IP , TCP , and UDP headers. There are two major steps to ? ...

  • Patton electronic Model 2604 - page 53

    Defining a filter 51 T1/E1 DACS Administrators’ Reference Guide 8 • Filter IP After entering an ID number and name, click on the name of the filter to display the filter parameters window (see figure 18). Figure 18. Filter IP parameters window The configurable filter parameters are : • N ame (filterI pName) • Direction (filterI pDire ...

  • Patton electronic Model 2604 - page 54

    8 • Filter IP T1/E1 DACS Administrators’ Reference Guide 52 Defining a filter The following sections pro vide detailed descriptions of the configurable filter IP parameters. Name (filterIpName) This is the name of the filter Direction (filterIpDirection) S pecifies the direction of the filter (that is, whether it applies to data packets ...

  • Patton electronic Model 2604 - page 55

    Defining a filter 53 T1/E1 DACS Administrators’ Reference Guide 8 • Filter IP Destination Mask (filterIpDestinationMask) This is the destination mask used when comparing a packet’ s destination address. Bit positions that are set to 1 will be compared and 0’ s will be ignored. Thus, a setting of 0.0.0.0 will have the effect of disabling de ...

  • Patton electronic Model 2604 - page 56

    8 • Filter IP T1/E1 DACS Administrators’ Reference Guide 54 Defining a filter ...

  • Patton electronic Model 2604 - page 57

    55 Chapter 9 ICMP Chapter contents Introduction ..........................................................................................................................................................56 Block ICMP redirects (boxBLockIcmpRedirects) ..................................................................................................56 ...

  • Patton electronic Model 2604 - page 58

    9 • ICMP T1/E1 DACS Administrators’ Reference Guide 56 Introduction Introduction When networking problems or undesirable conditions occur , the ICMP protocol is used for communicating control or error information plus testing. The statistics listed on the DACS ICMP windo w (see figure 19) com- prise those contained in RFC 792—Internet Contro ...

  • Patton electronic Model 2604 - page 59

    ICMP Receive/Send Messages window 57 T1/E1 DACS Administrators’ Reference Guide 9 • ICMP T otal Sent [imcpOutMsgs] Similar to icmpI nMsgs, T otal Sent represents the total number of ICMP messages which the 2604 has attempted to send. This variable includes all ICMP messages counted by icmpOutErrors (see “ wo/Errors [icm- pOutErrors]”). w/Er ...

  • Patton electronic Model 2604 - page 60

    9 • ICMP T1/E1 DACS Administrators’ Reference Guide 58 ICMP Receive/Send Messages window ICMP source quench message back to the sending device. A host may send this messages if packets arrive too fast to be processed or if there is network congestion. The source quench message is a request to reduce the rate at which the source is sending traf? ...

  • Patton electronic Model 2604 - page 61

    59 Chapter 10 IP Chapter contents Introduction ..........................................................................................................................................................61 IP main window ................................................................................................................................... ...

  • Patton electronic Model 2604 - page 62

    10 • IP T1/E1 DACS Administrators’ Reference Guide 60 Advanced… ....................................................................................................................................................67 O/S forwarding table window ..................................................................................................... ...

  • Patton electronic Model 2604 - page 63

    Introduction 61 T1/E1 DACS Administrators’ Reference Guide 10 • IP Introduction The IP (Internet P rotocol) window lists IP statistics and parameters, and enables you to modify IP settings. Figure 20. IP main window Click on IP under the Configuration Menu to display the IP window . IP main window All items described in this chapter are defin ...

  • Patton electronic Model 2604 - page 64

    10 • IP T1/E1 DACS Administrators’ Reference Guide 62 IP main window Forwarding (ipFor warding) The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by , but not addressed to, this entity . IP gateways for ward datagrams, IP hosts do not (ex cept those source-routed via the host). N ...

  • Patton electronic Model 2604 - page 65

    IP main window 63 T1/E1 DACS Administrators’ Reference Guide 10 • IP Note The Discar ded w/N o Errors counter does not include any datagrams discarded while awaiting r e-assembly . T otal Deliveries (ipInDelivers) The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). Out Requests (ipOutRequests) The t ...

  • Patton electronic Model 2604 - page 66

    10 • IP T1/E1 DACS Administrators’ Reference Guide 64 Modify # Fragmented OK (ipFragOKs) The number of IP datagrams that have been successfully fragmented at this entity . # Fragmented Failed (ipFragFails) The number of IP datagrams that have been discarded because they r equired fragmenting at this entity , but were not fragmented because thei ...

  • Patton electronic Model 2604 - page 67

    Addressing Information 65 T1/E1 DACS Administrators’ Reference Guide 10 • IP Addressing Information The IP addressing Information windo w (see figure 22) is wher e you can view the default address for outgoing IP datagrams, the local or loopback address of the box, and the IP addr ess of the box as defined in Chapter 15, “System ”. Figure ...

  • Patton electronic Model 2604 - page 68

    10 • IP T1/E1 DACS Administrators’ Reference Guide 66 Routing Information Routing Information The IP Routing I nformation window (see figure 24) displays information r equired to r oute IP datagrams, including the IP address, subnet mask, next-hop router , and interface for each network interface defined in the DACS. The IP Routing I nformati ...

  • Patton electronic Model 2604 - page 69

    Routing Information 67 T1/E1 DACS Administrators’ Reference Guide 10 • IP Mask (ipRouteMask) Indicates the mask to be logical-ANDed with the destination addr ess before being compar ed to the value in the ipRouteDest field. F or those systems that do not support arbitrar y subnet masks, an agent constructs the value of the ipRouteM ask by dete ...

  • Patton electronic Model 2604 - page 70

    10 • IP T1/E1 DACS Administrators’ Reference Guide 68 O/S forwarding table window O/S forwarding table window The O/S forwarding table window lists forwarding information for all routes. Figure 25. IP Routing For warding T able Destination (ipRouteDest) The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a d ...

  • Patton electronic Model 2604 - page 71

    O/S forwarding table window 69 T1/E1 DACS Administrators’ Reference Guide 10 • IP • direct(3)—route to dir ectly connected (sub-)network • indirect(4)—route to a non-local host/network/sub-networ k Note The values direct(3) and indir ect(4) refer to the notion of direct and indirect routing in the IP architectur e. Setting this object t ...

  • Patton electronic Model 2604 - page 72

    10 • IP T1/E1 DACS Administrators’ Reference Guide 70 IP Routing Destination window IP Routing Destination window The IP Routing Destination windo w (see figure 26) sho ws next-hop routing information. Figure 26. Routing Destination window Route Destination (ipRouteDest) The destination IP address of this route. An entry with a value of 0.0.0. ...

  • Patton electronic Model 2604 - page 73

    Address Translation Information 71 T1/E1 DACS Administrators’ Reference Guide 10 • IP Seconds Since Updated (ipRouteAge) The number of seconds since this route was last updated or otherwise determined to be correct. T ag (RouteT ag) An identifier associated with the route. This can have different meanings depending on the protocol. F or exam- ...

  • Patton electronic Model 2604 - page 74

    10 • IP T1/E1 DACS Administrators’ Reference Guide 72 Address Translation Information Net Address (ipNetT oMediaNetAddress) The IP address corresponding to the media-dependent physical addr ess. Physical (ipNetT oMediaPhysAddress) The media-dependent physical address. T ype (ipNetT oMediaT ype) The type of mapping. Setting this object to the va ...

  • Patton electronic Model 2604 - page 75

    73 Chapter 11 TCP Chapter contents Introduction ..........................................................................................................................................................74 TCP main window ................................................................................................................................. ...

  • Patton electronic Model 2604 - page 76

    11 • TCP T1/E1 DACS Administrators’ Reference Guide 74 Introduction Introduction T ransmission Control P rotocol (TCP) is in the T ransport layer of the OSI model and sits on top of IP . I t is one of the more widely used protocols among the TCP/IP suite. The TCP subsystem web pages of the 2604 DACS pro vides management and statistical informat ...

  • Patton electronic Model 2604 - page 77

    TCP main window 75 T1/E1 DACS Administrators’ Reference Guide 11 • TCP Maximum Connections (tcpMaxConn) The limit on the total number of TCP connections the entity can support. In entities wher e the maximum number of connections is dynamic, this object should contain the value -1. Active Opens (tcpActiveOpens) The number of times TCP connectio ...

  • Patton electronic Model 2604 - page 78

    11 • TCP T1/E1 DACS Administrators’ Reference Guide 76 TCP (Details) TCP (Details) F rom this screen you can view port details for remote and local TCP connections (see figure 29). Figure 29. TCP Details window Local Port (tcpConnLocalPor t) The local port number for this TCP connection. Remote Address (tcpConnRemAddress) The remote IP address ...

  • Patton electronic Model 2604 - page 79

    TCP (Details) 77 T1/E1 DACS Administrators’ Reference Guide 11 • TCP • finW ait1(6) • finW ait2(7) • closeW ait(8) • lastAck(9) • closing(10) • timeW ait(11) • deleteT CB(12) ...

  • Patton electronic Model 2604 - page 80

    11 • TCP T1/E1 DACS Administrators’ Reference Guide 78 TCP (Details) ...

  • Patton electronic Model 2604 - page 81

    79 Chapter 12 UDP Chapter contents Introduction ..........................................................................................................................................................80 Handling of NETBIOS UDP Broadcasts (boxNetbiosUdpBridging) ..............................................................80 Received (udpInDatagr ...

  • Patton electronic Model 2604 - page 82

    12 • UDP T1/E1 DACS Administrators’ Reference Guide 80 Introduction Introduction U ser Datagram P rotocol (UDP) is supported by the DACS. Detailed information regar ding the SNMP man- agement information base (MIB) variables can be found in RFC1213: Management Information Base for N etwork Management of TCP/IP-based internets: MIB-II . T o mana ...

  • Patton electronic Model 2604 - page 83

    Introduction 81 T1/E1 DACS Administrators’ Reference Guide 12 • UDP Listener T able (udpT able) A table containing UDP listener information. Local Address (udpLocalAddress) The local IP address for this UDP listener . In the case of a UDP listener that is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0 ...

  • Patton electronic Model 2604 - page 84

    12 • UDP T1/E1 DACS Administrators’ Reference Guide 82 Introduction ...

  • Patton electronic Model 2604 - page 85

    83 Chapter 13 RIP V ersion 2 Chapter contents Introduction ..........................................................................................................................................................84 RIP Version 2 main window............................................................................................................. ...

  • Patton electronic Model 2604 - page 86

    13 • RIP Version 2 T1/E1 DACS Administrators’ Reference Guide 84 Introduction Introduction The RIP V ersion 2 main window (see figure 31) describes routing information as defined b y the Routing I nfor- mation P rotocol (RIP). All object identifiers described in this chapter comply with those contained in RFC 1724: RIP V ersion 2 MIB Extensi ...

  • Patton electronic Model 2604 - page 87

    RIP Version 2—Configuration 85 T1/E1 DACS Administrators’ Reference Guide 13 • RIP Version 2 2. Enter the protocol version to be used for sending RIP packets . The following choices are available: – doNotSend (1) – ripV ersion1 (2) —ripV ersion 1 implies sending RIP updates compliant with RFC 1058 – rip1Compatible (3) —rip1Compatibl ...

  • Patton electronic Model 2604 - page 88

    13 • RIP Version 2 T1/E1 DACS Administrators’ Reference Guide 86 RIP Version 2—Configuration Domain (rip2IfConfDomain) V alue inserted into the Routing Domain field of all RIP packets sent on this interface. Authentication T ype (rip2IfConfAuthT ype) The type of Authentication used on this interface. • noAuthentication (1) • simpleP assw ...

  • Patton electronic Model 2604 - page 89

    RIP Version 2 (Statistics) 87 T1/E1 DACS Administrators’ Reference Guide 13 • RIP Version 2 Status (rip2IfConfStatus) W riting invalid has the effect of deleting this interface. • valid (1) • invalid (2) RIP V ersion 2 (Statistics) By clicking on Statistics in the RIP V ersion 2 main window , you enter the RIP V ersion 2 Status win- dow (se ...

  • Patton electronic Model 2604 - page 90

    13 • RIP Version 2 T1/E1 DACS Administrators’ Reference Guide 88 RIP Version 2 (Statistics) ...

  • Patton electronic Model 2604 - page 91

    89 Chapter 14 SNMP Chapter contents Introduction ..........................................................................................................................................................90 SNMP window..................................................................................................................................... ...

  • Patton electronic Model 2604 - page 92

    14 • SNMP T1/E1 DACS Administrators’ Reference Guide 90 Introduction Introduction The DACS pro vides management and statistical information on SNMP . Detailed information on the SNMP MIB variables may be downloaded fr om the RFC. Click on SNMP under the Configuration Menu to dis- play the SNMP window (see figure 34). Figure 34. SNMP window SN ...

  • Patton electronic Model 2604 - page 93

    In 91 T1/E1 DACS Administrators’ Reference Guide 14 • SNMP Bad Community Names (snmpInBadCommunityNames) The total number of SNMP M essages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity . Bad Community Uses (snmpInBadCommunity) The total number of SNMP messages delivered to the SNMP protocol ent ...

  • Patton electronic Model 2604 - page 94

    14 • SNMP T1/E1 DACS Administrators’ Reference Guide 92 Out Get Next Requests (snmpInGetNexts) The total number of SNMP Get-N ext PDUs that have been accepted and processed b y the SNMP protocol entity . Set Requests (snmpInSetRequests) The total number of SNMP Set-R equest PDU s that have been accepted and processed b y the SNMP protocol entit ...

  • Patton electronic Model 2604 - page 95

    Out 93 T1/E1 DACS Administrators’ Reference Guide 14 • SNMP Get Responses (snmpOutGetResponses) The total number of SNMP Get-Response PDU s that have been generated by the SNMP protocol entity . T raps (snmpOutT raps) The total number of SNMP T rap PDU s that have been generated by the SNMP protocol entity . Authentication Failure T raps (snmpE ...

  • Patton electronic Model 2604 - page 96

    14 • SNMP T1/E1 DACS Administrators’ Reference Guide 94 Out ...

  • Patton electronic Model 2604 - page 97

    95 Chapter 15 System Chapter contents Introduction ..........................................................................................................................................................97 System main window ........................................................................................................................... ...

  • Patton electronic Model 2604 - page 98

    15 • System T1/E1 DACS Administrators’ Reference Guide 96 Physical Location (sysLocation) ...............................................................................................................101 Web Settings (boxBackgroundFlag) ........................................................................................................101 ...

  • Patton electronic Model 2604 - page 99

    Introduction 97 T1/E1 DACS Administrators’ Reference Guide 15 • System Introduction The System main window (see figure 35) contains general setup information about the DA CS. System param- eters are P atton Enterprise MIB object identifiers, though some are contained in RFC 1213, Management I nformation Base for N etwork Management of TCP/IP- ...

  • Patton electronic Model 2604 - page 100

    15 • System T1/E1 DACS Administrators’ Reference Guide 98 System main window System main window F rom this window you can view information for the CPU, SNMP and HTTP , L AN IP , Manufacturer , Mes- sage Blocks, Operating S ystem H eap M emory , Enclosure System, I nstallation, and Other . The main window also has the follo wing links: • Modif ...

  • Patton electronic Model 2604 - page 101

    System main window 99 T1/E1 DACS Administrators’ Reference Guide 15 • System How to Obtain Address (boxIP AddressT echnique) This displays the current method for obtaining the LAN IP address (see figure 35 on page 97). Address(boxIP Address) If the address technique in use abo ve is static, then the value display ed in the Address field is th ...

  • Patton electronic Model 2604 - page 102

    15 • System T1/E1 DACS Administrators’ Reference Guide 100 System main window T otal Times Unavailable (boxCountMsgBlkUnavailable) The total number of times that the proper size message block was not available to hold a packet, and the CPU task dumped the packet. The difference between T otal Time W aited and T otal T imes Unavailable is whethe ...

  • Patton electronic Model 2604 - page 103

    System main window 101 T1/E1 DACS Administrators’ Reference Guide 15 • System Running Since Last Boot (sysUpT ime) This SNMP variable repr esents the time since the network management portion of the system was last re-ini- tialized (see figure 35 on page 97). System Manager (sysContact) This SNMP variable repr esents the textual identificatio ...

  • Patton electronic Model 2604 - page 104

    15 • System T1/E1 DACS Administrators’ Reference Guide 102 System—Modify window System—Modify window The System—Modify window (see figure 36) is where you can change SNMP and HTTP , L AN IP , Installation, and Other . Figure 36. System—Modify window SNMP and HTTP This portion of the System—Modify window provides information about the ...

  • Patton electronic Model 2604 - page 105

    System—Modify window 103 T1/E1 DACS Administrators’ Reference Guide 15 • System User Password (boxSnmpMonitorPassword) This accesses the user monitoring password for r ead only access of certain selected information. Not all param- eters shown using the superuser password ar e displayed under the user passwor d. (see figure 36 on page 102). ...

  • Patton electronic Model 2604 - page 106

    15 • System T1/E1 DACS Administrators’ Reference Guide 104 System—Modify window • france(5) • germany(6) Other This portion of the System—Modify window contains information described in the following sections. System Manager (sysContact) This SNMP variable repr esents the textual identification of the contact person for this managed no ...

  • Patton electronic Model 2604 - page 107

    System—Packet Holding Message Blocks... 105 T1/E1 DACS Administrators’ Reference Guide 15 • System • writeU serlpW anS ystemU pload(498)—The monitor user can change all parameters—except passwor ds— under authentication, drop-and-insert, dial-in, IP , T1/E1, Frame R elay , S ystem, and System Log links. The monitor user can also load ...

  • Patton electronic Model 2604 - page 108

    15 • System T1/E1 DACS Administrators’ Reference Guide 106 System—Packet Holding Message Blocks... ...

  • Patton electronic Model 2604 - page 109

    107 Chapter 16 System Log Chapter contents Introduction ........................................................................................................................................................108 System Log Main Window ................................................................................................................... ...

  • Patton electronic Model 2604 - page 110

    16 • System Log T1/E1 DACS Administrators’ Reference Guide 108 Introduction Introduction The System Log window (see figure 38) displays the r esults from the system-wide error r eporting subsystem. The object parameters in the system log are all P atton Enterprise MIB object identifiers. Figure 38. System Log main window System Log Main Windo ...

  • Patton electronic Model 2604 - page 111

    System Log—Modify 109 T1/E1 DACS Administrators’ Reference Guide 16 • System Log System Log—Modify The System Log—Modify window (see figure 39) displays SysLog and SNMP T rap Daemon IP Address loca- tions, message priorities for the offered SysLog destinations, priority and maintenance information. Figure 39. System Log—Modify window D ...

  • Patton electronic Model 2604 - page 112

    16 • System Log T1/E1 DACS Administrators’ Reference Guide 110 System Log—Modify Min Priority for SysLog Daemon (syslogDaemonPriority) System messages which have a priority equal to or gr eater than this setting will be sent to the syslog daemon defined by the SysLog D aemon IP Address (syslogD aemonIP). • prioritySystem(80) • priorityDi ...

  • Patton electronic Model 2604 - page 113

    System Log—Modify 111 T1/E1 DACS Administrators’ Reference Guide 16 • System Log • prioritySystem(80) • priorityDisable(1000) Min Priority for RAM (SyslogT ablePriority) System messages which have a priority equal to or gr eater than this setting will appear in System Log—V olatile M emory . The low er the number next to the priority li ...

  • Patton electronic Model 2604 - page 114

    16 • System Log T1/E1 DACS Administrators’ Reference Guide 112 System Log—Modify • local5(21) • local6(22) • local7(23) Call T race (syslogCallTrace) Enabling this will activate the call tracing utility . This is a powerful debugging utility which will log ever y single function call and return. At the death of a box the call trace will ...

  • Patton electronic Model 2604 - page 115

    System Log—Volatile Memory 113 T1/E1 DACS Administrators’ Reference Guide 16 • System Log System Log—V olatile Memory The System Log—V olatile Memor y window (see figur e 40) displays timestamp and stored system log message information. Figure 40. System Log—V olatile Memor y window Time (slTick) T ime stamps are generated every 10 ms. ...

  • Patton electronic Model 2604 - page 116

    16 • System Log T1/E1 DACS Administrators’ Reference Guide 114 System Log—Non-Volatile Memory System Log—Non-V olatile Memory The System Log—Non-V olatile window (see figure 41) displays the time stamp and the messages kept in the non-volatile F lash memory . Figure 41. System Log—Non-V olatile Memor y window Time (slfTick) T ime stamp ...

  • Patton electronic Model 2604 - page 117

    115 Chapter 17 T1/E1 Link Chapter contents Introduction ........................................................................................................................................................118 T1/E1 Link Activity main window .......................................................................................................... ...

  • Patton electronic Model 2604 - page 118

    17 • T1/E1 Link T1/E1 DACS Administrators’ Reference Guide 116 Controlled Slip Seconds (dsx1CurrentCSSs) .................................................................................................127 Path Code Violations (dsx1CurrentPCVs) ....................................................................................................1 ...

  • Patton electronic Model 2604 - page 119

    117 T1/E1 DACS Administrators’ Reference Guide 17 • T1/E1 Link Severely Errored Frame Seconds (dsx1FarEndIntervalSEFSs) ........................................................................133 Unavailable Seconds (dsx1FarEndIntervalUASs) ...........................................................................................133 Controlled ...

  • Patton electronic Model 2604 - page 120

    17 • T1/E1 Link T1/E1 DACS Administrators’ Reference Guide 118 Introduction Introduction The T1/E1 Link Activity window (see figure 42) sho ws the configuration of the T1/E1 Interface, and reports statistics on the quality of the T1/E1 connection. The statistics listed in this section comprise those contained in RFC 1406—Definitions of Man ...

  • Patton electronic Model 2604 - page 121

    T1/E1 Link Activity main window 119 T1/E1 DACS Administrators’ Reference Guide 17 • T1/E1 Link • Near End Line Statistics—Histor y… link—clicking on this link takes you to the page that displays line sta- tistics for the previous 15-minute interval. F or more information about this page, r efer to “N ear End Line S tatistics—History ...

  • Patton electronic Model 2604 - page 122

    17 • T1/E1 Link T1/E1 DACS Administrators’ Reference Guide 120 Line Status (dsx1LineStatus) Line Status (dsx1LineStatus) This variable indicates interface line status. It contains loopback, failur e, receiv ed alarm and transmitted alarm information. If any condition other than No Alarms exists, you can click on the Alarms Present link to view ...

  • Patton electronic Model 2604 - page 123

    Line Status (dsx1LineStatus) 121 T1/E1 DACS Administrators’ Reference Guide 17 • T1/E1 Link Alarm Indication Signal (AIS) Failure The Alarm Indication Signal failure is declar ed when an AIS defect is detected at the input and the AIS defect still exists after the Loss Of F rame failure (which is caused by the unframed nature of the all-ones si ...

  • Patton electronic Model 2604 - page 124

    17 • T1/E1 Link T1/E1 DACS Administrators’ Reference Guide 122 Line Status—Configuration Line Status—Configuration Clicking on the Line Status—Configuration link in the T1/E1 Link Activity window displays the W AN Circuit Configuration window (see figur e 44). This window contains general information about the DS1 interface, including ...

  • Patton electronic Model 2604 - page 125

    WAN Circuit Configuration—Modify 123 T1/E1 DACS Administrators’ Reference Guide 17 • T1/E1 Link W AN Circuit Configuration—Modify Clicking on the Configuration link in the T1/E1 Link Activity window displays the W AN Circuit Configura- tion—Modify window (see figure 45). F rom this window , you can change line interface settings, sign ...

  • Patton electronic Model 2604 - page 126

    17 • T1/E1 Link T1/E1 DACS Administrators’ Reference Guide 124 WAN Circuit Configuration—Modify • dsx1E1(4)—Based on CCITT/ITU G.704 without CR C • dsx1E1-CR C(5)—Based on CCITT/ITU G.704 with CRC Line Coding (dsx1LineCoding) This variable describes the type of Zero Code S uppression used on the link, which in turn affects a number of ...

  • Patton electronic Model 2604 - page 127

    WAN Circuit Configuration—Modify 125 T1/E1 DACS Administrators’ Reference Guide 17 • T1/E1 Link • Y ellowF ormatF rame12FS(3)—FS bit of frame 12 FDL (dsx1FDL) This describes which implementation of FDL is being used, if any . FDL applies only to T1 circuits. • other(1)—Indicates that a protocol other than one follo wing is used. • d ...

  • Patton electronic Model 2604 - page 128

    17 • T1/E1 Link T1/E1 DACS Administrators’ Reference Guide 126 WAN Circuit Configuration—Modify • dsx1Send511P attern—Sending a 511 bit fixed test pattern • dsx1Send3in24P attern—Sending a fixed test pattern of 3 bits set in 24 • dsx1SendOtherT estP attern—Sending a test pattern other than those described by this object. Error I ...

  • Patton electronic Model 2604 - page 129

    Near End Line Statistics—Current 127 T1/E1 DACS Administrators’ Reference Guide 17 • T1/E1 Link Near End Line Statistics—Current Click on Near End Line Statistics—Current to display line statistics for the current 15-minute interval (see figure 46). Figure 46. Current Near End Perfor mance window Errored Seconds (dsx1CurrentESs) The numb ...

  • Patton electronic Model 2604 - page 130

    17 • T1/E1 Link T1/E1 DACS Administrators’ Reference Guide 128 Near End Line Statistics—History Degraded Minutes (dsx1CurrentDMs) The number of degraded minutes (DMs) encountered by a DS1 interface in the current 15-minute interval. Line Code Violations (dsx1CurrentLCVs) The number of line code violations (LCVs) encountered b y a DS1 interfac ...

  • Patton electronic Model 2604 - page 131

    Near End Line Statistics—History 129 T1/E1 DACS Administrators’ Reference Guide 17 • T1/E1 Link Severely Errored Frame Seconds (dsx1IntervalSEFSs) The number of severely error ed framing seconds encountered by a DS1 interface in one of the pr evious 96, individual 15-minute, intervals. Unavailable Seconds (dsx1IntervalUASs) The number of unav ...

  • Patton electronic Model 2604 - page 132

    17 • T1/E1 Link T1/E1 DACS Administrators’ Reference Guide 130 Near End Line Statistics—Totals Near End Line Statistics—T otals Click on Near End Line Statistics—T otals to display the total statistics of errors that occurr ed during the previ- ous 24-hour period, the previous 96 15-minute intervals (see figure 48). Figure 48. T otals of ...

  • Patton electronic Model 2604 - page 133

    Far End Line Statistics—Current 131 T1/E1 DACS Administrators’ Reference Guide 17 • T1/E1 Link Degraded Minutes (dsx1T otalDMs) The number of degraded minutes (DMs) encountered by a DS1 interface in the previous 24-hour interval. Line Code Violations (dsx1T otalLCVs) The number of line code violations (LCVs) encountered b y a DS1 interface in ...

  • Patton electronic Model 2604 - page 134

    17 • T1/E1 Link T1/E1 DACS Administrators’ Reference Guide 132 Far End Line Statistics—History Controlled Slip Seconds (dsx1FarEndCurrentCSSs) The number of far-end controlled slip seconds encountered by a DS1 interface in the curr ent 15-minute inter- val. Line Errored Seconds (dsx1FarEndCurrentLESs) The number of far-end line errored second ...

  • Patton electronic Model 2604 - page 135

    Far End Line Statistics—History 133 T1/E1 DACS Administrators’ Reference Guide 17 • T1/E1 Link Interval (dsx1FarEndInter valNumber) A number between 1 and 96, where 1 is the most r ecently completed 15-minute interval and 96 is the least recently completed 15-minutes interval (assuming that all 96 intervals are valid). Errored Seconds (dsx1Fa ...

  • Patton electronic Model 2604 - page 136

    17 • T1/E1 Link T1/E1 DACS Administrators’ Reference Guide 134 Far End Line Statistics—Totals Far End Line Statistics—T otals Click on Far End Line Statistics—T otals to display the total statistics of errors that occurr ed during the previous 24-hour period (see figure 51). This is the sum of the current 15-minute interval and all time ...

  • Patton electronic Model 2604 - page 137

    Far End Line Statistics—Totals 135 T1/E1 DACS Administrators’ Reference Guide 17 • T1/E1 Link Bursty Errored Seconds (dsx1FarEndT otalBESs) The number of far-end bursty errored seconds (BESs) encounter ed by a DS1 interface in the previous 24-hour interval. Degraded Minutes (dsx1FarEndT otalDMs) The number of far-end degraded minutes (DMs) en ...

  • Patton electronic Model 2604 - page 138

    17 • T1/E1 Link T1/E1 DACS Administrators’ Reference Guide 136 Far End Line Statistics—Totals ...

  • Patton electronic Model 2604 - page 139

    137 Chapter 18 T1/E1 Assignment Chapter contents Introduction ........................................................................................................................................................138 Displaying the T1/E1 Assignment window.............................................................................................. ...

  • Patton electronic Model 2604 - page 140

    18 • T1/E1 Assignment T1/E1 DACS Administrators’ Reference Guide 138 Introduction Introduction The T1/E1 Assignment subsystem displays the W AN Assignment T able giving the DS0 mapping connection for each time slot for all four W AN ports. At the top of the W eb page are four hyperlinks showing the status of each W AN P or t’ s Alarms. F or e ...

  • Patton electronic Model 2604 - page 141

    Displaying the T1/E1 Assignment window 139 T1/E1 DACS Administrators’ Reference Guide 18 • T1/E1 Assignment Line S tatus Alarms web page. The “Line Status Alarms ” page gives the status of the T1/E1 W AN port. This is the same web page seen under the T1/E1 Link Activity page in the T1/E1 Link subsytem. U nder each W AN port column group are ...

  • Patton electronic Model 2604 - page 142

    18 • T1/E1 Assignment T1/E1 DACS Administrators’ Reference Guide 140 Displaying the T1/E1 Assignment window ...

  • Patton electronic Model 2604 - page 143

    141 Chapter 19 About Chapter contents Introduction ........................................................................................................................................................142 Patton Electronics Company contact information ...............................................................................................1 ...

  • Patton electronic Model 2604 - page 144

    19 • About T1/E1 DACS Administrators’ Reference Guide 142 Introduction Introduction The About link displays P atton Electronics Company contact information (see “P atton Electronics Company contact information ”). Click on About under the Configuration Menu to display the About main window (see figure 53). Figure 53. About window Patton E ...

  • Patton electronic Model 2604 - page 145

    143 Chapter 20 License Chapter contents Introduction ........................................................................................................................................................144 End User License Agreement .................................................................................................................. ...

  • Patton electronic Model 2604 - page 146

    20 • License T1/E1 DACS Administrators’ Reference Guide 144 Introduction Introduction The License link pr esents the End U ser License Agreement for the DACS software. Click on License under the Configuration Menu to display the License main window (see figure 54). Figure 54. License window By opening the DA CS, operating the Designated Equip ...

  • Patton electronic Model 2604 - page 147

    End User License Agreement 145 T1/E1 DACS Administrators’ Reference Guide 20 • License 2. Title: T itle to the Program(s), all copies of the P rogram(s), all patent rights, copyrights, trade secrets and proprietary information in the P rogram(s), worldwide, remains with P atton Electronics Company or its licensors. 3. T erm: The term of this Ag ...

  • Patton electronic Model 2604 - page 148

    20 • License T1/E1 DACS Administrators’ Reference Guide 146 End User License Agreement ...

Manufacturer Patton electronic Category Network Card

Documents that we receive from a manufacturer of a Patton electronic Model 2604 can be divided into several groups. They are, among others:
- Patton electronic technical drawings
- Model 2604 manuals
- Patton electronic product data sheets
- information booklets
- or energy labels Patton electronic Model 2604
All of them are important, but the most important information from the point of view of use of the device are in the user manual Patton electronic Model 2604.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Patton electronic Model 2604, service manual, brief instructions and user manuals Patton electronic Model 2604. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Patton electronic Model 2604.

Similar manuals

A complete manual for the device Patton electronic Model 2604, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Patton electronic Model 2604 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Patton electronic Model 2604.

A complete Patton electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Patton electronic Model 2604 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Patton electronic Model 2604, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Patton electronic Model 2604, that we can find in the current document
3. Tips how to use the basic functions of the device Patton electronic Model 2604 - which should help us in our first steps of using Patton electronic Model 2604
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Patton electronic Model 2604
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Patton electronic Model 2604 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Patton electronic Model 2604?

Use the form below

If you did not solve your problem by using a manual Patton electronic Model 2604, ask a question using the form below. If a user had a similar problem with Patton electronic Model 2604 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)