English dropdown-ico

Manual Alamo Machete T 7740

90 pages 0.03 mb
Download

Go to site of 90

Summary
  • Alamo Machete T 7740 - page 1

    2005 Edition Manual P/N 02980501 (08/05) © 2005 Alamo Group Inc. Alamo Industrial P . O. Drawer 549 Seguin, T exas 78155 830-379-1480 INFORMA TION & SER VICE BULLETINS BOOM ARM MOWER ™ ...

  • Alamo Machete T 7740 - page 2

    ...

  • Alamo Machete T 7740 - page 3

    © 2005 Alamo Group Inc. INFORMA TION & SER VICE BULLETINS INTRODUCTION This Book is divided into two Sections Section One - T echnical Information Bulletins 1. Technical Information Bulletins: Information Bulletins are listed by Bulletin Number (Date). Example the oldest Bulletin will be listed first and the most recent bulletin will be listed ...

  • Alamo Machete T 7740 - page 4

    © 2005 Alamo Group Inc. INDEX Machete Section 1 T echnical Information Bulletins INDEX - 1 Bulletin No. (Old No.) Page Date Description ----------......................... 1-1................ -----------.... Information Bulletins Introduction 012095.......................... 1-2................ 01/20/95.... Flail Axe Head Pulley Fastener Change 09 ...

  • Alamo Machete T 7740 - page 5

    © 2005 Alamo Group Inc. INDEX - 2 INDEX Machete Section 2 Service Bulletins Bulletin No. (Old No.) Page Date Description ----------......................... 2-1............... -----------.... Service Bulletin Introduction 951611... (950011) ....... 2-2................ 11/16/95.... Joystick Replacement 952911-1 (950014)....... 2-3................ 1 ...

  • Alamo Machete T 7740 - page 6

    © 2005 Alamo Group Inc. NOTES ...

  • Alamo Machete T 7740 - page 7

    © 2005 Alamo Group Inc. 1-1 MACHETE SECTION 1 TECHNICAL INFORMA TION BULLETINS (This Book is divided into two Sections) Section One - T echnical Information Bulletins 1. Technical Information Bulletins: Information Bulletins are listed by Bulletin Number (Date). Example the oldest Bulletin will be listed first and the most recent bulletin will be ...

  • Alamo Machete T 7740 - page 8

    © 2005 Alamo Group Inc. 1-2 MACHETE TECHNICAL INFORMA TION BULLETIN No. 012095 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Boom Mowers using Flail Axe Head Date: Jan. 20, 1995 Bulletin No: 012095 This document does not authorize the repair or replacement of parts under warranty P ...

  • Alamo Machete T 7740 - page 9

    © 2005 Alamo Group Inc. 1-3 MACHETE NOTES ...

  • Alamo Machete T 7740 - page 10

    © 2005 Alamo Group Inc. 1-4 MACHETE TECHNICAL INFORMA TION BULLETIN No. 092895 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Hydraulic mowers using the 02964028 Push-Pull Switch Date: Sep. 28, 1995 Bulletin No: 092895 Failures of the mower push-pull switch: Alamo has recently received ...

  • Alamo Machete T 7740 - page 11

    © 2005 Alamo Group Inc. 1-5 MACHETE Information Bulletin 092895 Continued from previous Page TECHNICAL INFORMA TION BULLETIN No. 092895 Contact: Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 Ph; 830-372-2708 Fax; 830-372-9603 This document does not authorize the repair or replacement of parts under warranty WI ...

  • Alamo Machete T 7740 - page 12

    © 2005 Alamo Group Inc. 1-6 MACHETE TECHNICAL INFORMA TION BULLETIN No. 121495 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete Boom Axe, Versa Boom, A-Boom, Slopemower & Rear Mount Booms. Date: Dec. 14, 1995 Bulletin No: 121495 Repair Procedure for Welding Cracks in Boom Heads: C ...

  • Alamo Machete T 7740 - page 13

    © 2005 Alamo Group Inc. 1-7 MACHETE Information Bulletin 121495 Continued from previous Page TECHNICAL INFORMA TION BULLETIN No. 121495 Contact: Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 Ph; 830-372-2708 Fax; 830-372-9603 This document does not authorize the repair or replacement of parts under warranty 48 ...

  • Alamo Machete T 7740 - page 14

    © 2005 Alamo Group Inc. 1-8 MACHETE Corrective Action: Using needle nosed pliers, push the B and C connectors out of the back of the plug and reinstall them in the opposite positions, or cut the two wires to the B and C connectors and splice them back together reversing them. TECHNICAL INFORMA TION BULLETIN No. 010896 Alamo Industrial ™ Technica ...

  • Alamo Machete T 7740 - page 15

    © 2005 Alamo Group Inc. 1-9 MACHETE TECHNICAL INFORMA TION BULLETIN No. 020596 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete Boom Mowers MB21 & MB24 Date: Feb. 5, 1996 Bulletin No: 020596 This document does not authorize the repair or replacement of parts under warranty New ...

  • Alamo Machete T 7740 - page 16

    © 2005 Alamo Group Inc. 1-10 MACHETE TECHNICAL INFORMA TION BULLETIN No. 032596 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete Boom MB21 & MB24 Date: Mar. 25, 1996 Bulletin No: 032596 New Seal Protector Added to Blade Bar Assembly: A few machines have experienced operational pro ...

  • Alamo Machete T 7740 - page 17

    © 2005 Alamo Group Inc. 1-11 MACHETE Information Bulletin 032596 Continued from previous Page TECHNICAL INFORMA TION BULLETIN No. 032596 Contact: Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 Ph; 830-372-2708 Fax; 830-372-9603 This document does not authorize the repair or replacement of parts under warranty S ...

  • Alamo Machete T 7740 - page 18

    © 2005 Alamo Group Inc. 1-12 MACHETE TECHNICAL INFORMA TION BULLETIN No. 040896 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Models using Single Acting Hydraulic Cylinder Date: Apr. 8, 1996 Bulletin No: 040896 This document does not authorize the repair or replacement of parts und ...

  • Alamo Machete T 7740 - page 19

    © 2005 Alamo Group Inc. 1-13 MACHETE TECHNICAL INFORMA TION BULLETIN No. 042996 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All New Holland Tractors with Alamo Industrial Mounted Booms Date: Apr. 29, 1996 Bulletin No: 042996 This document does not authorize the repair or replacement ...

  • Alamo Machete T 7740 - page 20

    © 2005 Alamo Group Inc. 1-14 MACHETE TECHNICAL INFORMA TION BULLETIN No. 010397 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete Boom MB21 & MB24 Date: Jan. 3, 1997 Bulletin No: 010397 Cracks in Main Frame: Continued Next Page Crack develops here Figure 1 There have been some crac ...

  • Alamo Machete T 7740 - page 21

    © 2005 Alamo Group Inc. 1-15 MACHETE Information Bulletin 010397 Continued from previous Page TECHNICAL INFORMA TION BULLETIN No. 010397 Contact: Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 Ph; 830-372-2708 Fax; 830-372-9603 This document does not authorize the repair or replacement of parts under warranty F ...

  • Alamo Machete T 7740 - page 22

    © 2005 Alamo Group Inc. 1-16 MACHETE TECHNICAL INFORMA TION BULLETIN No. 012097 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete, MB21 & MB24 Date: Jan. 20, 1997 Bulletin No: 012097 This document does not authorize the repair or replacement of parts under warranty Interference ...

  • Alamo Machete T 7740 - page 23

    © 2005 Alamo Group Inc. 1-17 MACHETE TECHNICAL INFORMA TION BULLETIN No. 031097 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete, MB21 & MB24 & Brahma Side Mount models Date: Mar. 10, 1997 Bulletin No: 031097 A kit (Kit # 02972094) to replace the O-Ring and Back-up Rings w ...

  • Alamo Machete T 7740 - page 24

    © 2005 Alamo Group Inc. 1-18 MACHETE This document does not authorize the repair or replacement of parts under warranty TECHNICAL INFORMA TION BULLETIN No. 032697 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete, MB21 & MB24 Date: Mar. 26, 1997 Bulletin No: 032697 King Pin and ...

  • Alamo Machete T 7740 - page 25

    © 2005 Alamo Group Inc. 1-19 MACHETE NOTES ...

  • Alamo Machete T 7740 - page 26

    © 2005 Alamo Group Inc. 1-20 MACHETE TECHNICAL INFORMA TION BULLETIN No. 041797-1 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete, MB21 & MB24 Date: Apr. 17, 1997 Bulletin No: 041797-1 Hitch Post Replacement Kit s: Hitch Post replacement kits are now available for Machete Boo ...

  • Alamo Machete T 7740 - page 27

    © 2005 Alamo Group Inc. 1-21 MACHETE Information Bulletin 041797-1 Continued from previous Page 4. After aligning the Angles to Deck (See Figure 2) tack weld them in place. Recheck all measurements and alignments, then weld in flanges in place. TECHNICAL INFORMA TION BULLETIN No. 041797-1 This document does not authorize the repair or replacement ...

  • Alamo Machete T 7740 - page 28

    © 2005 Alamo Group Inc. 1-22 MACHETE TECHNICAL INFORMA TION BULLETIN No. 041797-2 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete, MB21 & MB24 Date: Apr. 17, 1997 Bulletin No: 041797-2 Cylinder & Linkage Pin Replacement Kit s: Boom cylinder pin replacement kits for all Ma ...

  • Alamo Machete T 7740 - page 29

    © 2005 Alamo Group Inc. 1-23 MACHETE Information Bulletin 041797-2 Continued from previous Page TECHNICAL INFORMA TION BULLETIN No. 041797-2 This document does not authorize the repair or replacement of parts under warranty Note: Replaces / Same as Bulletin No. 041797A2 Weld Weld Weld Weld Weld Weld Weld Figure 2 ...

  • Alamo Machete T 7740 - page 30

    © 2005 Alamo Group Inc. 1-24 MACHETE TECHNICAL INFORMA TION BULLETIN No. 060197 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete, MB21 & MB24 Date: Jun. 1, 1997 Bulletin No: 060197 Tilt Link Arm Stop: Some Machete models may exhibit interference between the head tilt cylinder ...

  • Alamo Machete T 7740 - page 31

    © 2005 Alamo Group Inc. 1-25 MACHETE TECHNICAL INFORMA TION BULLETIN No. 061897 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete, MB21 S/N 01001 - 01071, 03507 & 02684 & MB24 S/N 01001 - 01040 & 03459 Date: Jun. 18, 1997 Bulletin No: 061897 New Thick Blade Bar & La ...

  • Alamo Machete T 7740 - page 32

    © 2005 Alamo Group Inc. 1-26 MACHETE TECHNICAL INFORMA TION BULLETIN No. 071797 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete, MB21 S/N 01001 - 01108 & MB24 S/N 01001 - 01045 Date: Jul. 17, 1997 Bulletin No: 071797 Joystick Power Cut Off Switch: A Joystick Supply Cut Off Sw ...

  • Alamo Machete T 7740 - page 33

    © 2005 Alamo Group Inc. 1-27 MACHETE TECHNICAL INFORMA TION BULLETIN No. 100397 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete, MB21 S/N 01001 - 01108 & MB24 S/N 01001 - 01045 Date: Oct. 3, 1997 Bulletin No: 100397 Cylinder , Link Arm, T urning Arm & Hitch Post Pin Updat ...

  • Alamo Machete T 7740 - page 34

    © 2005 Alamo Group Inc. 1-28 MACHETE TECHNICAL INFORMA TION BULLETIN No. 1 12097 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete, MB21 S/N 01001 - 01108 & MB24 S/N 01001 - 01045 Date: Nov. 20, 1997 Bulletin No: 112097 Up date Kits Combined (Kit P/N 02973216): Includes - Hitch ...

  • Alamo Machete T 7740 - page 35

    © 2005 Alamo Group Inc. 1-29 MACHETE NOTES ...

  • Alamo Machete T 7740 - page 36

    © 2005 Alamo Group Inc. 1-30 MACHETE TECHNICAL INFORMA TION BULLETIN No. 120697 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: MacheteBoom MB21 & MB24 Date: Dec. 6, 1997 Bulletin No: 120697 Lock V alve Inst allation Instructions: Instructions for installing a lock valve on the tilt func ...

  • Alamo Machete T 7740 - page 37

    © 2005 Alamo Group Inc. 1-31 MACHETE Information Bulletin 120697 Continued from previous Page TECHNICAL INFORMA TION BULLETIN No. 120697 This document does not authorize the repair or replacement of parts under warranty Electrical connection: Identify the plus (+) lead running to the solenoid for the tilt function. This solenoid is located across ...

  • Alamo Machete T 7740 - page 38

    © 2005 Alamo Group Inc. 1-32 MACHETE TECHNICAL INFORMA TION BULLETIN No. 041398 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Machete Boom , MB21 & MB24 All Slope Mowers Date: Apr. 13, 1998 Bulletin No: 041398 Eleminate Erratic Boom movement: (which utilize the joystick operate ...

  • Alamo Machete T 7740 - page 39

    © 2005 Alamo Group Inc. 1-33 MACHETE TECHNICAL INFORMA TION BULLETIN No. 020199 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Machete Boom , MB21 & MB24 All A-Boom Mowers utilizing the New Holland TS Series Tractors Date: Feb. 1, 1999 Bulletin No: 020199 Hood to Frame Interfere ...

  • Alamo Machete T 7740 - page 40

    © 2005 Alamo Group Inc. 1-34 MACHETE This document does not authorize the repair or replacement of parts under warranty TECHNICAL INFORMA TION BULLETIN No. 031000 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Models mounted on New Holland TS Series Tractors Date: Mar. 10, 2000 Bulletin ...

  • Alamo Machete T 7740 - page 41

    © 2005 Alamo Group Inc. 1-35 MACHETE This document does not authorize the repair or replacement of parts under warranty TECHNICAL INFORMA TION BULLETIN No. 032200-1 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Machete Boom , MB21 & MB24 Date: Mar. 22, 2000 Bulletin No: 032200- ...

  • Alamo Machete T 7740 - page 42

    © 2005 Alamo Group Inc. 1-36 MACHETE This document does not authorize the repair or replacement of parts under warranty TECHNICAL INFORMA TION BULLETIN No. 080300 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Machete, A-Boom, Versa, Rear Mount, Slopemower, Brahma, EKII, Hydro 60, H ...

  • Alamo Machete T 7740 - page 43

    © 2005 Alamo Group Inc. 1-37 MACHETE TECHNICAL INFORMA TION BULLETIN No. 080400 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Machete, A-boom, Versa Boom, Slopemower. Boom Mowers which utilize the Joystick operated control valve with the 02976069 oil Filter Kit installed. Date: Aug ...

  • Alamo Machete T 7740 - page 44

    © 2005 Alamo Group Inc. 1-38 MACHETE TECHNICAL INFORMA TION BULLETIN No. 012501 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete Boom Mowers S/N MB21- 01572 & Up S/N MB21-01245 & Up Date: Jan 25, 2001 Bulletin No: 012501 This document does not authorize the repair or repla ...

  • Alamo Machete T 7740 - page 45

    © 2005 Alamo Group Inc. 1-39 MACHETE TECHNICAL INFORMA TION BULLETIN No. 040901 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Alamo Industrial Products are affected. Date: Apr. 9, 2001 Bulletin No: 040901 This document does not authorize the repair or replacement of parts under war ...

  • Alamo Machete T 7740 - page 46

    © 2005 Alamo Group Inc. 1-40 MACHETE TECHNICAL INFORMA TION BULLETIN No. 041001-1 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete Boom, MB21-01109 & Down MB24-01046 & Down Date: Apr. 10, 2001 Bulletin No: 041001-2 This document does not authorize the repair or replacement ...

  • Alamo Machete T 7740 - page 47

    © 2005 Alamo Group Inc. 1-41 MACHETE TECHNICAL INFORMA TION BULLETIN No. 041001-2 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete Boom, MB21-01109 & Down MB24-01046 & Down Date: Apr. 10, 2001 Bulletin No: 041001-1 This document does not authorize the repair or replacement ...

  • Alamo Machete T 7740 - page 48

    © 2005 Alamo Group Inc. 1-42 MACHETE TECHNICAL INFORMA TION BULLETIN No. 041 101 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Alamo Industrial Products using the Buzz Bar Head are affected. Date: Apr. 11, 2001 Bulletin No: 041101 This document does not authorize the repair or repl ...

  • Alamo Machete T 7740 - page 49

    © 2005 Alamo Group Inc. 1-43 MACHETE TECHNICAL INFORMA TION BULLETIN No. 101802 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Machete, A-Boom, Versa, Rear Mount, Slopemower, Brahma, EKII, Hydro 60, Hydro 72 & Hydro 15 All Hydraulic powered Rotary Mower heads that utilize the # ...

  • Alamo Machete T 7740 - page 50

    © 2005 Alamo Group Inc. 1-44 MACHETE TECHNICAL INFORMA TION BULLETIN No. 121802 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: Machete Boom Mowers - All Brahma Side Mnt Mowers - All Date: Dec. 18, 2002 Bulletin No: 121802 As of November 10 of 2002, Alamo Industrial ™ changed the speci ...

  • Alamo Machete T 7740 - page 51

    © 2005 Alamo Group Inc. 1-45 MACHETE TECHNICAL INFORMA TION BULLETIN No. 021802 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Machete™ Boom Mower and All Brahma™ Side Mnt Mowers Date: Feb. 18, 2003 Bulletin No: 021803 W ARRANTY REP AIRS: Effective February 18, 2003: Warranty re ...

  • Alamo Machete T 7740 - page 52

    © 2005 Alamo Group Inc. 1-46 MACHETE TECHNICAL INFORMA TION BULLETIN No. 041503 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Hydraulic Mowers Mounted on John Deere 6215 (s/n All) , 6415 (s/n 6415M355436), 6320 (s/n 6320H361093), 6420(s/n 6420H354700) and 6615 (s/n All) Tractors with T ...

  • Alamo Machete T 7740 - page 53

    © 2005 Alamo Group Inc. 1-47 MACHETE Information Bulletin 041503 Continued from previous Page Install the new retaining washer (PN 02979829) so that it fits flat against the pulley. The original factory washer will not be used. (See Figure 4) Use the original Factory Pulley retaining Bolt (See Figure 1). Figure 3 Engine Side of Pulley Driveshaft S ...

  • Alamo Machete T 7740 - page 54

    © 2005 Alamo Group Inc. 1-48 MACHETE TECHNICAL INFORMA TION BULLETIN No. 102103 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Non-Cab Models with Expanded Metal Side Screens Date: Oct. 21, 2003 Bulletin No: 102103 Alamo Industrial has designed a Lexan® ( Polycarbonate) Shield that ...

  • Alamo Machete T 7740 - page 55

    © 2005 Alamo Group Inc. 1-49 MACHETE Information Bulletin 102103 Continued from previous Page 5. Securely clamp the cut Lexan sheets onto the expanded metal screen aligning the outer edges, this can be done upper or lower sheet first. Using a 3/8" drill bit drill the mounting holes through the lexan sheet in a pattern as in Figure 2. When dri ...

  • Alamo Machete T 7740 - page 56

    © 2005 Alamo Group Inc. 1-50 MACHETE TECHNICAL INFORMA TION BULLETIN No. 01 1304 Alamo Industrial ™ Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Models: All Machete Boom, Brahma & A-Boom Mounted on New Holland "TS" Series Tractors Date: Jan. 13, 2004 Bulletin No: 011304 Alamo Industrial has design ...

  • Alamo Machete T 7740 - page 57

    © 2005 Alamo Group Inc. 1-51 MACHETE Information Bulletin 01 1304 Continued from previous Page TECHNICAL INFORMA TION BULLETIN No. 01 1304 This document does not authorize the repair or replacement of parts under warranty Pump End Clamp Yoke Engine Pulley Pulley S pacer Driveline Asy Driveline Mounting Bolts Pump Mounting Bolts, Use Existing Hardw ...

  • Alamo Machete T 7740 - page 58

    © 2005 Alamo Group Inc. 1-52 MACHETE NOTES ...

  • Alamo Machete T 7740 - page 59

    © 2005 Alamo Group Inc. 2-1 MACHETE SECTION 2 SER VICE BULLETINS (This Book is divided into two Sections) Section T wo - Service Bulletins 1. Service Bulletin No: Service Bulletins are listed by Bulletin Number (Date). Example the oldest Bulletin will be listed first and the most recent bulletin will be listed last. If more than one bulletin was w ...

  • Alamo Machete T 7740 - page 60

    © 2005 Alamo Group Inc. 2-2 MACHETE SERVICE BULLETIN No. 95161 1 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Joystick Replacement: Subject: The electronic console (Joystick Controls) must be replace on the above listed mowers. Service Required: 1. Disconnect wiring harness from console at connec ...

  • Alamo Machete T 7740 - page 61

    © 2005 Alamo Group Inc. 2-3 MACHETE SERVICE BULLETIN No. 95291 1-1 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Motor to Spindle Bolt Replacement: Subject: Replace motor to spindle bolts with longer bolts. Original Bolts may not keep Motor tight to spindle. Service Required: 1. Clean the head, es ...

  • Alamo Machete T 7740 - page 62

    © 2005 Alamo Group Inc. 2-4 MACHETE SERVICE BULLETIN No. 95291 1-2 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 King Post Pin Replacement: (Longer Pins) Subject: Replace King Post Pins with new longer pins Service Required: 1. Measure the length of the bottom king post pin, this can be done witho ...

  • Alamo Machete T 7740 - page 63

    © 2005 Alamo Group Inc. 2-5 MACHETE NOTES ...

  • Alamo Machete T 7740 - page 64

    © 2005 Alamo Group Inc. 2-6 MACHETE SERVICE BULLETIN No. 962503-1 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Rear Flap Bracket, Machete Rot ary Head: Subject: Install rear flap bracket on Machete Rotary Heads. Brackets will aid in deflecting material away from the tractor. Service Required: 1. ...

  • Alamo Machete T 7740 - page 65

    © 2005 Alamo Group Inc. 2-7 MACHETE Warranty Compensation will be provided following proper filing of warranty claim in accordance with the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a specific region. Any Warranty associated with this service bulletin must be within authorized dates. Service Bulle ...

  • Alamo Machete T 7740 - page 66

    © 2005 Alamo Group Inc. 2-8 MACHETE SERVICE BULLETIN No. 962503-2 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Lower Crossmember Kit Inst allation: Subject: Install lower frame rail crossmember kit to reduce frame rail deflection and movement. Service Required: 1. Install Crossmember between fram ...

  • Alamo Machete T 7740 - page 67

    © 2005 Alamo Group Inc. 2-9 MACHETE SERVICE BULLETIN No. 962703 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Frame Rail Reinforcement, LH Frame Rail: Subject: Add Gusset to Left Frame rail of certain A-Booms and Machetes Service Required: 1. Weld Gusset, P/N 02970138 to left frame rail as instruc ...

  • Alamo Machete T 7740 - page 68

    © 2005 Alamo Group Inc. 2-10 MACHETE SERVICE BULLETIN No. 962310 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Joystick Control of Boom Movement: Subject: Lack of proportional control of the Boom Movement may develope due to the joy stick controls. Service Required: 1. Operated Boom controls for t ...

  • Alamo Machete T 7740 - page 69

    © 2005 Alamo Group Inc. 2-11 MACHETE SERVICE BULLETIN No. 96051 1 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Restrictor Inst allation Tilt Cylinder Function: Subject: Cutting Head Tilt function drops too fast. Install one-way restrictor in tilt circuit to reduce the lowering speed of the tilt f ...

  • Alamo Machete T 7740 - page 70

    © 2005 Alamo Group Inc. 2-12 MACHETE SERVICE BULLETIN No. 971903 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 T urning Arm - King Pin Upgrades: Subject: Boom Hinge Point Pin Upgrades. These repairs are covered in detail on Technical Information Bulletins # 041797-1 and # 041797-2. These Technical ...

  • Alamo Machete T 7740 - page 71

    © 2005 Alamo Group Inc. 2-13 MACHETE Service Bulletin 971903 Continued from previous Page SERVICE BULLETIN No. 971903 Warranty Compensation will be provided following proper filing of warranty claim in accordance with the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a specific region. Any Warranty as ...

  • Alamo Machete T 7740 - page 72

    © 2005 Alamo Group Inc. 2-14 MACHETE SERVICE BULLETIN No. 972103 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Boom Hinge Point Pin Upgrades: Subject: Boom Hinge Point Pin Upgrades. These repairs are covered in detail on Technical Information Bulletins # 041797-1 and # 041797-2. These Technical In ...

  • Alamo Machete T 7740 - page 73

    © 2005 Alamo Group Inc. 2-15 MACHETE Service Bulletin 972103 Continued from previous Page SERVICE BULLETIN No. 972103 Warranty Compensation will be provided following proper filing of warranty claim in accordance with the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a specific region. Any Warranty as ...

  • Alamo Machete T 7740 - page 74

    © 2005 Alamo Group Inc. 2-16 MACHETE SERVICE BULLETIN No. 971404 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Restrictor Inst allation Lift & Dipper Cylinder Function: Subject: Lift and/or dipper functions drop to fast. When both functions are combined, sudden drop may occur. Install one way ...

  • Alamo Machete T 7740 - page 75

    © 2005 Alamo Group Inc. 2-17 MACHETE SERVICE BULLETIN No. 973107 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Upper King Pin Bushing Slipping: Subject: It is possible that the upper King Pin Bushing may loose retention and work down from the bore. This could result in damage to the frame, Pin and ...

  • Alamo Machete T 7740 - page 76

    © 2005 Alamo Group Inc. 2-18 MACHETE SERVICE BULLETIN No. 970108 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Blade Bolt Inspection / Recall: Subject: The Blade Bolt Nut Retaining Roll Pin Bore may be oversized and could allow the roll pin to become loose in the bore. The loose roll pin could the ...

  • Alamo Machete T 7740 - page 77

    © 2005 Alamo Group Inc. 2-19 MACHETE SERVICE BULLETIN No. 990303 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Lower Cross Member Reinforcement Kit P/N 02974182: Subject: Support gussets have been added to the lower crossmember frame support Service Required: 1. Secure the tractor to facilitate a ...

  • Alamo Machete T 7740 - page 78

    © 2005 Alamo Group Inc. 2-20 MACHETE SERVICE BULLETIN No. 992704 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 New Holland T7740 & T6640 A/C Drier Camp aign: Subject: In order to increase customer satisfaction, New Holland is providing a new Air conditioner Receiver Drier Kit for the S/N units ...

  • Alamo Machete T 7740 - page 79

    © 2005 Alamo Group Inc. 2-21 MACHETE SERVICE BULLETIN No. 99191 1 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 New Holland TS T ractor Inspection Camp aign: Subject: In order to increase customer satisfaction, New Holland is requesting inspection of some tractors (See S/N's listed below) det ...

  • Alamo Machete T 7740 - page 80

    © 2005 Alamo Group Inc. 2-22 MACHETE SERVICE BULLETIN No. 991012 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 T urning Arm Pin Up date Kit P/N 02974182: Subject: Machete Boom Mower Turning Arm Main Pin Retaining Design Update to increase the durability of the main Pin retaining device. Service Re ...

  • Alamo Machete T 7740 - page 81

    © 2005 Alamo Group Inc. 2-23 MACHETE Warranty Compensation will be provided following proper filing of warranty claim in accordance with the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a specific region. Any Warranty associated with this service bulletin must be within authorized dates. Service Bull ...

  • Alamo Machete T 7740 - page 82

    © 2005 Alamo Group Inc. 2-24 MACHETE SERVICE BULLETIN No. 002908 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Dipper Boom Reinforcement Plates: Subject: Loads and the resulting stress incurred during heavy to abusive operation of the Machete Boom may allow for fracture of the outer (Dipper) Boom ...

  • Alamo Machete T 7740 - page 83

    © 2005 Alamo Group Inc. 2-25 MACHETE SERVICE BULLETIN No. 000510 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 V alve Pressure Filter Kit: Subject: A new filter kit P/N 02976069 has been developed and must be installed to help prevent some contamination failures of the control valve system due to ...

  • Alamo Machete T 7740 - page 84

    © 2005 Alamo Group Inc. 2-26 MACHETE SERVICE BULLETIN No. 010607 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Buzz Bar Head Motor Coupler Re-Design: Subject: Failures of the Motor to drive spindle molded coupler require inspection of the drive system and possible replacement of the coupler parts. ...

  • Alamo Machete T 7740 - page 85

    © 2005 Alamo Group Inc. 2-27 MACHETE SERVICE BULLETIN No. 021202 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Buzz Bar Head Motor Coupler Coupler Up date Kit: Subject: Buzz Bar Motor to Spindle drive components may fail prematurely due to misalignment of the Motor and Spindle. Complete instructio ...

  • Alamo Machete T 7740 - page 86

    © 2005 Alamo Group Inc. 2-28 MACHETE SERVICE BULLETIN No. 030702 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Blade Bolt Inspection: Subject: Quality inspections revealed the potential for cracking of the Blade Bolt. Cracks are the result of manufacturing procedures and will be present on the bol ...

  • Alamo Machete T 7740 - page 87

    © 2005 Alamo Group Inc. 2-29 MACHETE SERVICE BULLETIN No. 050504 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-372-2708 Blade Carrier Ret aining Bolts: Subject: Due to the Possibility of Bolts that may not meet Alamo Industrial Standard being used in the production process all bolts that meet the Serial Nu ...

  • Alamo Machete T 7740 - page 88

    © 2005 Alamo Group Inc. 2-30 MACHETE SERVICE BULLETIN No. 083005-1 Alamo Industrial Technical Services Department 1502 East Walnut Seguin, Texas 78155 830-379-1480 Port Plug Up date: Subject: On Machete and Brahma pumps utilizing the new design Servo Solenoid Valve assembly, An incor- rect port plug was installed in the port next to the solenoid V ...

  • Alamo Machete T 7740 - page 89

    ...

  • Alamo Machete T 7740 - page 90

    © 2005 Alamo Group Inc. Machete Technical Information Bulletin and Service Bulletin Manual Manual P/N 02980501 (08/05) ...

Manufacturer Alamo Category Lawn Mower

Documents that we receive from a manufacturer of a Alamo Machete T 7740 can be divided into several groups. They are, among others:
- Alamo technical drawings
- Machete T 7740 manuals
- Alamo product data sheets
- information booklets
- or energy labels Alamo Machete T 7740
All of them are important, but the most important information from the point of view of use of the device are in the user manual Alamo Machete T 7740.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Alamo Machete T 7740, service manual, brief instructions and user manuals Alamo Machete T 7740. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Alamo Machete T 7740.

Similar manuals

A complete manual for the device Alamo Machete T 7740, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Alamo Machete T 7740 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Alamo Machete T 7740.

A complete Alamo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Alamo Machete T 7740 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Alamo Machete T 7740, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Alamo Machete T 7740, that we can find in the current document
3. Tips how to use the basic functions of the device Alamo Machete T 7740 - which should help us in our first steps of using Alamo Machete T 7740
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Alamo Machete T 7740
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Alamo Machete T 7740 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Alamo Machete T 7740?

Use the form below

If you did not solve your problem by using a manual Alamo Machete T 7740, ask a question using the form below. If a user had a similar problem with Alamo Machete T 7740 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)