English dropdown-ico

Manual Asante Technologies 100TX

74 pages 2.34 mb
Download

Go to site of 74

Summary
  • Asante Technologies 100TX - page 1

    IntraSpection ™ Personality Modules AsantéF AST ™ 100 Hub AsantéF AST 100 TX Managed Hub User’ s Manual Asanté T echnologies, Inc. 821 Fox Lane San Jose, CA 95131 1.800.662.9686 www .asante.com August 1997 Part Number 06-00341-00 Rev . A 100NMM PM book Page i Wednesday, August 27, 1997 12:40 PM ...

  • Asante Technologies 100TX - page 2

    Copyright Notice Copyright  1997 by Asanté T echnologies, Inc . All rights reserved. No part of this manual, or any associated artwork, software, product design or design concept, may be copied, reproduced or stored, in whole or in part, in any form or by any means mechanical, electronic, optical, photocop ying, recording or otherwise, includin ...

  • Asante Technologies 100TX - page 3

    Page iii T able of Contents Introduction...................................................................... 1-1 IntraSpection Personality Modules ............................................ 1-1 AsantéFAST 100 Hub Personality Module ........................... 1-1 AsantéFAST 100 TX Managed Hub Personality Module ...... 1-2 Management Options . ...

  • Asante Technologies 100TX - page 4

    Page iv Viewing General Device Information ............................ 3-14 Viewing Module Information ......................................... 3-15 Viewing SNMP Agent Information ................................. 3-16 Enabling/Disabling Ports ................................................ 3-17 Disabling a Group ................................ ...

  • Asante Technologies 100TX - page 5

    Page 1-1 1 Introduction IntraSpection Personality Modules A P er sonality Module is a “plug-in” to the IntraSpection system that allows f or expanded manag ement of an SNMP device b y specifically addressing the device’ s proprietar y information (the “Private MIB”). Management capabilities are accessed via the P er sonality Module’ s ...

  • Asante Technologies 100TX - page 6

    Introduction Page 1-2 AsantéF AST 100 TX Managed Hub Personality Module The AsantéF AST 100 TX Managed Hub P ersonality Module allows for e xpanded management of an AsantéF AST 100TX Managed Hub or a stack of 100 Hubs with an attached Manag ed Hub. See Figur e 1-2. Figure 1-2 AsantéF AST 100 TX Managed Hub Device P age Management Options Both t ...

  • Asante Technologies 100TX - page 7

    IntraSpection Personality Modules Page 1-3 System Requirements Server ❏ IntraSpection version 1.01 ❏ PC with 80486 or faster micropr ocessor ❏ 48MB RAM ❏ 100MB free disk space ❏ Windo ws NT™ 3.51 or higher or W indows NT 4.0 (r ec- ommended) ❏ W eb ser ver that supports Common Gatewa y Interface (CGI) 1.1 (such as Netscape F astT rack ...

  • Asante Technologies 100TX - page 8

    Introduction Page 1-4 About This Manual This manual is divided into the follo wing chapters: ❏ Chapter 1, “Introduction, ” describes IntraSpection P er sonality Modules. ❏ Chapter 2, “Installation” e xplains how to install the AsantéF AST 100 and AsantéF AST 100 TX Managed Hub P er sonality Modules. ❏ Chapter 3, “Management, ” e ...

  • Asante Technologies 100TX - page 9

    Page 2-1 2 Installation Installing a Personality Module This chapter e xplains how to install the AsantéF AST 100 Hub and AsantéF AST 100 TX Mana ged Hub P er sonality Modules. Both P er sonality Modules are contained within the same installation file. When you install the file, you install both P er sonality Modules. ▲ Important: Befor e ins ...

  • Asante Technologies 100TX - page 10

    Installation Page 2-2 7 Click Ye s to accept the agreement and continue with the installation. Click No to e xit the installa- tion. The IntraSpection P er sonality Module Read Me win- dow appears. Review the inf or mation carefully . 8 Click Next to continue. The decompressed P er sonality Module files are installed onto your computer . The “De ...

  • Asante Technologies 100TX - page 11

    Installing a Personality Module Page 2- 3 The “IntraSpection Module Installation” windo w appears. ▲ Important: This window should be pointing to the director y that contains the IntraSpection (websuite.e xe) program. If it is not, click Browse and locate that director y . 14 Click OK . ∆ Note: A “Select Database” window ma y appear . I ...

  • Asante Technologies 100TX - page 12

    100NMM PM book Page 4 Wednesday, August 27, 1997 12:40 PM ...

  • Asante Technologies 100TX - page 13

    Page 3-1 3 Management This chapter e xplains how to access and use a Personality Module’ s Device P age. The Device Pag e provides access to the P er sonality Mod- ule’ s management options. Accessing the Device Page T o access the Device Pag e for an AsantéF AST 100 Hub stack, you must first create a map of the network. 1 Make sure the P er ...

  • Asante Technologies 100TX - page 14

    Management Page 3-2 ❏ Make sure the Enterprise ID field has a value of all . ❏ T ype the lowest (beginning) IP address on y our networ k in the Low IP Address field. ❏ T ype the highest (last) IP address on your netw or k in the Hi IP Address field. ❏ Select New in the Discovery Mode field to create a new map, or select Append to attach ...

  • Asante Technologies 100TX - page 15

    Device Page Components Page 3-3 Device Page Components A P er sonality Module’ s Device Pag e consists of several components, including device inf ormation, a front panel imag e, and mana gement menu items. See Figure 3-2. Figure 3-2 Device P age components The Device P ages f or the AsantéF AST 100 Hub and AsantéF AST 100 TX Managed Hub P er s ...

  • Asante Technologies 100TX - page 16

    Management Page 3-4 Front Panel Image Components The front panel image contains the f ollowing components (as illustrated in Figure 3-4): ❏ Device — the entire stack of hubs and the attac hed management module. ❏ Group — each module within the device. ❏ Port — each port on each g roup. ❏ Status LEDs — real-time LEDs that repr esent ...

  • Asante Technologies 100TX - page 17

    Selecting the Device for Management Page 3-5 Selecting the Device for Management The AsantéF AST 100 Hub and AsantéF AST 100 TX Managed Hub can be managed at differ ent levels; that is, at the device, gr oup, or por t level. For e xample, if a g roup is selected and you select the Reset menu, that group (module) will be r eset. If the device is s ...

  • Asante Technologies 100TX - page 18

    Management Page 3-6 Menu Components The menus on the AsantéF AST 100 Hub and AsantéF AST 100 TX Man- aged Hub Device P ages provide access to the differ ent management options supported by each Personality Module. T ables Some menus contain tables with information that is configurable directly on-scr een from y our W eb browser while others cont ...

  • Asante Technologies 100TX - page 19

    Performing Basic Management Functions Page 3-7 Performing Basic Management Functions This section e xplains how to perform some basic management func- tions with both P er sonality Modules. This section cov ers the following tasks: Configuration T asks Management T asks Management T ask Page Setting community strings page 3-8 Configuring network ...

  • Asante Technologies 100TX - page 20

    Management Page 3-8 Setting Community Strings Community strings define access r ights for r eading and writing SNMP data objects for a device. The community strings (read community and write community) for an AsantéF AST 100 Hub stack’ s management module are manuall y set in the management module via the module’ s console port. In order to a ...

  • Asante Technologies 100TX - page 21

    Setting Community Strings Page 3-9 Figure 3-7 IntraSpection Map Manager P age 3 Click the Edit Device button. The Map Configuration T able appear s, similar to Figure 3-8. Figure 3-8 Map Configuration T able 4 Enter the management module’ s IP address in the IP Address field. 5 Enter the management module’ s read community string in the Read ...

  • Asante Technologies 100TX - page 22

    Management Page 3-10 Configuring Network Access Parameters T o configure and/or manage an AsantéF AST 100 Hub stack ov er the net- wor k or via out-of-band access, the hub stack’ s mana gement module needs to be properly configur ed with networ k access parameters. These parameters are initially set-up in the manag ement module via the module ...

  • Asante Technologies 100TX - page 23

    Configuring Device Identification Information Page 3-11 Configuring Device Identification Information T o help with hub identification, y ou can add certain hub details; such as, the hub stack’ s physical address, name, location, and contact inf or- mation. T o configure device identification information: 1 Do not select any item on the Devi ...

  • Asante Technologies 100TX - page 24

    Management Page 3-12 Performing a Software Upgrade An AsantéF AST 100 Hub stack’ s software can be upg raded via IntraSpec- tion. T o upgrade an AsantéF AST 100 Hub stack’ s software: 1 Click Software . The Software Upg rade table appears, similar to Figure 3-11. Figure 3-11 Software Upg rade table 2 T ype the software’ s file name and net ...

  • Asante Technologies 100TX - page 25

    Updating the Device Page Page 3-13 Updating the Device Page The files for both P er sonality Modules are stored within the Intr aSpec- tion Application Server’ s database. Occasionall y , these files should be updated from the Device P a ge to ensur e that you are vie wing the hub’ s latest information. T o update the Personalty Module’ s D ...

  • Asante Technologies 100TX - page 26

    Management Page 3-14 Viewing General Device Information General device inf ormation includes items such as the management module’ s version and revision number s, chassis type, backplane type, and backplane revision number . T o view gener al device information: 1 Do not select any item on the Device P age’ s front panel image. (This selects th ...

  • Asante Technologies 100TX - page 27

    Viewing Module Information Page 3-15 Viewing Module Information Module information includes inf or mation on each group within the device. T o view module information: 1 Do not select any item on the Device P age’ s front panel image. (This selects the entire hub stack.) 2 Click Modules . The Module T able appears, similar to F igure 3-13. Figure ...

  • Asante Technologies 100TX - page 28

    Management Page 3-16 Viewing SNMP Agent Information This menu allows you to vie w information on the management module’ s software ag ent. This inf ormation includes the module’ s a gent type and mode, software and firmware version numbers, and trap authentication status. T o view SNMP agent inf ormation: 1 Do not select any item on the Device ...

  • Asante Technologies 100TX - page 29

    Enabling/Disabling Ports Page 3-17 Enabling/Disabling Ports The enabling or disabling of a port is a manual operation that can be used to isolate networ k devices possibly causing pr oblems on the net- wor k or to prevent unauthorized use of a port or station. T o enable or disable a port: 1 Click Ports . Y ou do not need to select any particular i ...

  • Asante Technologies 100TX - page 30

    Management Page 3-18 Disabling a Group T o disable a group: ▲ Important: Group 15 (the bottom module within a stack) and the stack’ s mana gement module CANNO T be disabled. For mor e information on groups and g roup numbering, see “Group Numbering” on page 3-4. 1 Select the group to be disabled on the Device P age’ s front panel image by ...

  • Asante Technologies 100TX - page 31

    Partitioning a Port Page 3-19 Partitioning a Port P ort partitioning is an operation that is done automatically by the hub in certain circumstances to stop transmission on a port, if the por t is enabled for automatic partitioning. T o enable or disable automatic partitioning: 1 Select the port to be par titioned (or group containing the port) by c ...

  • Asante Technologies 100TX - page 32

    Management Page 3-20 Resetting a Group or Device If you c hang ed the IP addr ess, subnet mask, and/or default gatewa y for a management module within a device, that management module needs to be reset. Resets can be performed at the device level (r esets the entire stack) or at the group lev el (resets an individual hub or a management module). T ...

  • Asante Technologies 100TX - page 33

    Enabling Traps Page 3-21 Enabling T raps The T rap Authentication f eature enables an AsantéF AST 100 Hub stack’ s management module to g enerate traps. T raps ar e gener ated when cer- tain actions — such as an unauthorized IP address attempts to access a certain por t — are violated. T o enable T rap Authentication: 1 Do not select any ite ...

  • Asante Technologies 100TX - page 34

    Management Page 3-22 Managing T rap Receivers The T rap Receivers menu allows y ou to set whic h manag ement stations on your netw ork can receiv e traps. This section descr ibes how to add and delete a trap receiv er . T o add a trap receiver entry: 1 Do not select any item on the Device P age’ s front panel image. (This selects the entire hub s ...

  • Asante Technologies 100TX - page 35

    Managing Trap Receivers Page 3-23 Deleting a T rap Receiver Entry T o delete a trap receiver entry: 1 Click once on the row containing the entry to be deleted. 2 Click Modify . The Modify Dialog box appear s. 3 Open the Status drop-down menu and select invalid . 4 Click Apply. 5 Click Refresh in the T rap Receiver T a ble. The trap receiv er is del ...

  • Asante Technologies 100TX - page 36

    Management Page 3-24 Setting Alarms Alarm thresholds can help you locate problems or f aults on the net- wor k. When you set a threshold f or an activity on a hub, you instruct the hub to take a specific action when a value falls abov e or below the set threshold. This section e xplains how to set, delete, and modify alarm thresholds. T o add an a ...

  • Asante Technologies 100TX - page 37

    Setting Alarms Page 3-25 Field Description Action Index Displays the number of the alarm entry . This field is read-only; it cannot be edited. Status The status of the alarm entry . Select valid to add an alarm or invalid to delete the alarm. T arget Domain The portion of the device for which the alarm is to be set. Select port , group , or segmen ...

  • Asante Technologies 100TX - page 38

    Management Page 3-26 Deleting an Alarm T o delete an alar m: 1 Select the alarm entr y to be deleted by clicking once on its row in the Alar m Threshold T able. 2 Click Modify . The Modify Dialog box appear s. 3 Open the Status drop-down menu and select invalid . 4 Click Apply . The alarm is deleted. Click Refresh to view updated information. Modif ...

  • Asante Technologies 100TX - page 39

    Viewing Node Summary Information Page 3-27 Viewing Node Summary Information The Node Summar y menu provides IP mapping inf or mation (a summar y of node activity) for the device or a selected g roup. Each node addr ess remains in the table f or the amount of seconds specified in the Node Aging Timer . T o view node summar y information: 1 T o view ...

  • Asante Technologies 100TX - page 40

    Management Page 3-28 Setting Port Security The P ort Secur ity menu allows network manag er s to control access to ports by specifying the physical addresses that are authorized to con- nect to the ports. If an unspecified ph ysical address attempts to con- nect to a certain por t, an action (such as automatic partitioning of the port, sending of ...

  • Asante Technologies 100TX - page 41

    Setting Port Security Page 3-29 5 Enter the number of the port for which port security information is to be set in the PortIndex field. 6 Open the Status drop-down menu and select valid . 7 Enter the physical (MA C) address that is allow ed to use the selected port number in the Allowed Address field. ▲ Important: Enter the physical addr ess in ...

  • Asante Technologies 100TX - page 42

    Management Page 3-30 Viewing Statistics Statistics for an AsantéF AST 100 Hub stack can be viewed in tw o dif fer- ent formats: table or graph. Statistics collected include runts, alignment error s, late collisions, short events, good frames, and bad frames. T able Statistics 1 Select a group or a port f or which statistics are to be gathered by c ...

  • Asante Technologies 100TX - page 43

    Viewing Statistics Page 3-31 Graph Statistics 1 Select a group or a port f or which statistics ar e to be gath- ered by clicking on it once on the fr ont panel image. T o view statistics f or the device, do NOT select an ything. 2 Click Graph . The Graph Statistics page appears f or the group, port or device selected, similar to Figure 3-28. Figure ...

  • Asante Technologies 100TX - page 44

    100NMM PM book Page 32 Wednesday, August 27, 1997 12:40 PM ...

  • Asante Technologies 100TX - page 45

    Page 4-1 4 Menus This chapter describes each manag ement menu and its contents on the AsantéF AST 100 Hub and AsantéF AST 100 TX Managed Hub P er sonality Modules’ Device Pag e. The table below provides a brief description of each menu; the sections that follo w explain eac h menu in detail. Table 4-1 Device Page Menu Descriptions Menu Descript ...

  • Asante Technologies 100TX - page 46

    Menus Page 4-2 Menu Description Control T itle for the submenus listed below it; this menu cannot be selected. See “Control” on page 4-11. Reset Allows you to reset a group or device. See “Reset” on page 4-11. Partition Allows you to enable or disable a group and partition a port. See “Partition” on page 4-12. Threshold Allows you to se ...

  • Asante Technologies 100TX - page 47

    Identify Page 4-3 Configuration This menu is not a management option; it is a title for the configur ation sub-menus listed below it. This menu CANNOT be selected. Identify This menu provides read-onl y and configurable identification informa- tion for the device. T able 4-2 descr ibes each field in the Identify menu. ∆ Note: For instruction ...

  • Asante Technologies 100TX - page 48

    Menus Page 4-4 Device This menu provides read-onl y , g eneral inf ormation on the device. T able 4-3 descr ibes each field in the Device menu. ∆ Note: For instructions on using this menu, see “Vie wing General Device Inf ormation” on page 3-14. Table 4-3 Device Menu Field Description V ersion Number Read-only field; displays the current ve ...

  • Asante Technologies 100TX - page 49

    Modules Page 4-5 Modules This menu provides read-onl y information on each group within the device. T able 4-4 descr ibes each field in the Modules menu. ∆ Note: For instructions on using this menu, see “Vie wing Module Information” on page 3-15. Table 4-4 Modules Menu Field Description Group Index Read-only field; displays the number of th ...

  • Asante Technologies 100TX - page 50

    Menus Page 4-6 Ports This menu provides read-onl y and configurable information for eac h port on the device. T able 4-5 descr ibes each field in the P or ts menu. ∆ Note: For instructions on using this menu, see “Enabling/ Disabling P orts” on page 3-17 and “P ar titioning a Port” on page 3-19. Table 4-5 Ports Menu Field Description Gr ...

  • Asante Technologies 100TX - page 51

    Ports Page 4-7 Field Description Admin Status Configurable field; determines the state of the port. ❏ enabled — the port is enabled and can receive packets. ❏ disabled — the port is disabled and cannot receive packets. See “Enabling/Disabling Ports” on page 3-17 for instructions. 100NMM PM book Page 7 Wednesday, August 27, 1997 12:40 ...

  • Asante Technologies 100TX - page 52

    Menus Page 4-8 Agent This menu provides read-onl y and configurable information for the device’ s SNMP agent. T able 4-6 descr ibes each field in the Agent menu. ∆ Note: For instructions on using this menu, see “Vie wing SNMP Ag ent Information” on page 3-16. Table 4-6 Agent Menu Field Description SWV ersion Major Read-only field; displa ...

  • Asante Technologies 100TX - page 53

    Network Page 4-9 Network This menu provides configurab le network access inf or mation for the device’ s management module. This information is needed to access the device across the networ k (in-band management). T able 4-7 descr ibes each field in the Netw ork menu. ▲ Important : If you c hange the IP address , subnet mask , or default gate ...

  • Asante Technologies 100TX - page 54

    Menus Page 4-10 SWUpgrade This menu provides read-onl y and configurable software upgr ade and boot method information (the parameters used for downloading a ne w version of software) f or the device. T able 4-8 descr ibes each field in the SWUpg rade menu. ∆ Note: For instructions on using this menu, see “Per- forming a Software Upg rade” ...

  • Asante Technologies 100TX - page 55

    Reset Page 4-11 Control This menu is not a management option; it is a title for the sub-menus listed below it. This menu CANNOT be selected. Reset This menu allows you to r eset the device or a selected g roup within the device. T able 4-9 descr ibes each field in the Reset menu. ∆ Note: For instructions on using this menu, see “Resetting a Gr ...

  • Asante Technologies 100TX - page 56

    Menus Page 4-12 Partition This menu allows you to disable a g roup or configure a port for auto- matic partitioning. T able 4-10 descr ibes each field in the P ar tition menu. ▲ Important: Group 15 (the bottom module in the stack) and the stack’ s mana gement module CANNO T be disabled. For mor e information on groups and g roup numbering, se ...

  • Asante Technologies 100TX - page 57

    Threshold Page 4-13 Threshold This menu displays the current alarms that are set and allows alarms to be added or modified. Alarms can help you locate problems or f aults on the network. When you set an alarm threshold f or an activity on a hub, you instruct the hub to take a specific action when the value falls abov e or below the set threshold. ...

  • Asante Technologies 100TX - page 58

    Menus Page 4-14 Field Description Subject Configurable field; determines the counter to be polled. ❏ readableframes — the total number of good or readable frames (frames without error). ❏ frametoolong — the number of frames that were longer than 1,518 bytes. ❏ runts — the number of frames that were shorter than 64 bytes. ❏ alignment ...

  • Asante Technologies 100TX - page 59

    Threshold Page 4-15 Field Description Startup Event Configurable field; determines when the alarm is to be triggered. ❏ rising — alarm is triggered when the event rate rises above the threshold. ❏ falling — alarm is triggered when the event rate falls below the threshold. ❏ rising and falling — alarm is triggered when the event rate r ...

  • Asante Technologies 100TX - page 60

    Menus Page 4-16 Node Summary This menu provides IP mapping inf or mation (a summar y of node activ- ity on the device or a selected group). T able 4-12 descr ibes each field in the Node Summary menu. ∆ Note: For instructions on using this menu, see “Vie wing Node Summar y Information” on page 3-27. Table 4-12 Node Summary Menu Field Descript ...

  • Asante Technologies 100TX - page 61

    Table Page 4-17 V alidate This menu updates the P ersonality Module’ s Device P age with the latest information stored in the IntraSpection Application Ser ver database. For instructions on using this menu, see “Updating the Device P age” on page 3-13. Statistics This menu is not an actual management option; it is a title to the sub- menus li ...

  • Asante Technologies 100TX - page 62

    Menus Page 4-18 Field Description ❏ Datarate Mismatch — the number of errors where the incoming data rate is not within the tolerance level of 10Mhz (+ or - 0.01%). ❏ Short Events — the number of data bursts, where data is less than 10 bytes in length. ❏ MauJabberLockups — the number of times the hub repeater chip goes into a lockup sta ...

  • Asante Technologies 100TX - page 63

    Graph Page 4-19 Graph This menu provides real-time statistical inf or mation, in a graph f or mat, on the device, group or port selected. T able 4-14 descr ibes each field in the Gr aph menu. ∆ Note: For instructions on using this menu, see “Vie wing Statistics” on page 3-30. Table 4-14 Graph Menu Field Description Seconds Drop-down menu; sp ...

  • Asante Technologies 100TX - page 64

    Menus Page 4-20 Security This menu is not a management option; it is a title for the sub-menus listed below it. This menu CANNOT be selected. Port Security This menu allows you to contr ol access to ports by specifying the physi- cal addresses that are allow ed to connect to cer tain ports. If an unau- thorized physical address attempts to connect ...

  • Asante Technologies 100TX - page 65

    Trap Receivers Page 4-21 T rap Receivers This menu allows you to determine the management stations that will receive tr aps from the device. T able 4-16 descr ibes each field in the T rap Receiv er s menu. ∆ Note: For instructions on using this menu, see “Managing T rap Receivers” on page 3-22. Table 4-16 Trap Receivers Menu Field Descriptio ...

  • Asante Technologies 100TX - page 66

    100NMM PM book Page 22 Wednesday, August 27, 1997 12:40 PM ...

  • Asante Technologies 100TX - page 67

    Page A-1 A T echnical Support Contacting Asanté T echnical Support T o contact Asanté T echnical Support: T elephone (800) 622-7464 Fax (408) 432-6018 Fax-Bac k (800) 741-8607 (408) 954-8607 Internet Mail support@asante.com W orld Wide W eb http://www .asante.com Bulletin Board Service (BBS) (408) 432-1416 ARA BBS (guest log in) (408) 894-0765 Ap ...

  • Asante Technologies 100TX - page 68

    100NMM PM book Page 2 Wednesday, August 27, 1997 12:40 PM ...

  • Asante Technologies 100TX - page 69

    Index-i Index Numerics 100NMM.ipm, installation 2-1 A about this manual 1-4 add button 3-6 agent information, viewing 3-16 menu 4-8 reset, description 4-11 alarm thresholds. See alarms alarms adding 3-24 configuring 3-24 deleting 3-26 detected value 4-15 last measurement 4-15 modifying 3-26 owner string 4-15 polling interval 4-15 responses 4-15 sam ...

  • Asante Technologies 100TX - page 70

    Index-ii default gateway and changing 4-9 configuring 3-10 description 4-9 description information 4-3 device (entire hub stack) defined 3-4 general information, viewing 3-14 identification information, configuring 3-11 menu, description 4-4 page accessing 3-1 components of 3-3 front panel image 3-4 menus, overview 4-1 updating 3-13 view of 1-1 se ...

  • Asante Technologies 100TX - page 71

    Index-iii IntraSpection Application Server , starting 2-2 Map Manager 3-9 navigation bar 3-8 IP (Internet Protocol) address and changing 4-9 configuring 3-10 description 4-9 unauthorized 4-8 mapping. See node summar y J jabber status 4-6 L last IP address 4-16 physical address 4-16 late collisions 4-17 LEDs, viewing 3-4 link status, port 4-6 local ...

  • Asante Technologies 100TX - page 72

    Index-iv management (continued) trap receiv ers (continued) menu 4-21 traps, enabling 3-21 validate menu 4-17 viewing statistics 3-30 , 3-31 map, of the network, creating 3-1 Map Manager Page 3-9 mapping, IP. See node summary mau jabber lockups 4-18 menus buttons 3-6 components of 3-6 configurable information 3-6 overview of 4-1 read-only informati ...

  • Asante Technologies 100TX - page 73

    Index-v port (continued) security menu 4-20 using 3-28 violations 4-20 selecting 3-5 type 4-6 unauthorized access, violations 4-20 viewing image of 3-4 ports menu 4-6 R readable octets 4-18 read-only information 3-6 receivers (of traps) adding 3-22 deleting 3-23 refresh button 3-6 remote, boot info 4-10 protocol 4-10 configuring 3-12 requirements c ...

  • Asante Technologies 100TX - page 74

    Index-vi thresholds (continued) startup event 4-15 subject 4-14 target domain 4-13 group 4-13 port 4-13 threshold value 4-15 thresholds, alarm. See alarms trap authentication configuring 3-21 description 4-8 receivers adding 3-22 address, description 4-21 deleting 3-23 community string 4-21 menu 4-21 traps adding receiving stations 3-22 deleting re ...

Manufacturer Asante Technologies Category Switch

Documents that we receive from a manufacturer of a Asante Technologies 100TX can be divided into several groups. They are, among others:
- Asante Technologies technical drawings
- 100TX manuals
- Asante Technologies product data sheets
- information booklets
- or energy labels Asante Technologies 100TX
All of them are important, but the most important information from the point of view of use of the device are in the user manual Asante Technologies 100TX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Asante Technologies 100TX, service manual, brief instructions and user manuals Asante Technologies 100TX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Asante Technologies 100TX.

Similar manuals

A complete manual for the device Asante Technologies 100TX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Asante Technologies 100TX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Asante Technologies 100TX.

A complete Asante Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Asante Technologies 100TX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Asante Technologies 100TX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Asante Technologies 100TX, that we can find in the current document
3. Tips how to use the basic functions of the device Asante Technologies 100TX - which should help us in our first steps of using Asante Technologies 100TX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Asante Technologies 100TX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Asante Technologies 100TX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Asante Technologies 100TX?

Use the form below

If you did not solve your problem by using a manual Asante Technologies 100TX, ask a question using the form below. If a user had a similar problem with Asante Technologies 100TX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)