English dropdown-ico

Manual Smeg GB ST L80

19 pages 1.02 mb
Download

Go to site of 19

Summary
  • Smeg GB ST L80 - page 1

    5019 612 10095 GB STL 80 PROGRAMME CHART N.B.This machine is controlled by sensors. Please avoid excessive detergent dosing. Pro gra mm e Care Labels T ype of wash / Notes Max. load kg Detergents and additives Special Options Te m p e r a - ture °C Max. Spin Speed rpm Pre w as h Main Wa s h Softener Bleach Rinse Hold Intensive Rinse Half Load Spin ...

  • Smeg GB ST L80 - page 2

    5019 612 10095 Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IE C/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pr essure and temperature, the load and the type of wash. ...

  • Smeg GB ST L80 - page 3

    CONTENTS BEFORE USING THE WASHING MACHINE FIRST WASH CYCLE PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE WASHING MACHINE PREPARATION OF THE WASHING DETERGENTS AND ADDITIVES PROGRAMME SELECTION CLEANING THE FOREIGN BODY TRAP DRAINING RESIDUAL WATER CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER-SALES SERVICE TRANSPORT AND HANDLING INS ...

  • Smeg GB ST L80 - page 4

    GB 2 BEFORE USING THE WASHING MACHINE 1. Remove the packaging and ch ec k a. Cut and remove the shrink-wrap. b. Remove the top pro tection and the protective corners. c. Remove the bottom prot ection by tilting and turning the washing machine on one rear bottom corner. d. Open the lid by pressing it slightly down while raising the handle. Remove th ...

  • Smeg GB ST L80 - page 5

    GB 3 FIRST WASH CYCLE PRECAUTIONS AND GENERAL RECOMMENDATIONS 1. Packing • The packaging materials ar e 100% recyclable and bear the recycling symbol . Adhere to local regulations when disposing of packaging material. 2. Energy saving tips • Achieve the best use of energy, water, detergent and time by using the recommended maximum load size. ? ...

  • Smeg GB ST L80 - page 6

    GB 4 DESCRIPTION OF THE WASHING MACHINE PREPARATION OF THE WASHING Sort the laundry 1. Sort the laundry according to… • Type of fabric / care label symbol Cottons, mixed fibres, easy care/synthetics , wool, handwashed items. • Colour Separate whites and coloureds. Wash new coloured items separately. •S i z e Wash items of different sizes in ...

  • Smeg GB ST L80 - page 7

    GB 5 Loading the laundry 1. Open the machine lid. 2. Open the drum by pressing the small flap ( 2a ) or the push button ( 2b ) - depending on model - and holding the large flap. For the drum opening shown on 2c , you just have to press the push button, without holding the large flap. 3. Place the items of laundry in the drum one by one without comp ...

  • Smeg GB ST L80 - page 8

    GB 6 DETERGENTS AND ADDITIVES Choice of the right de tergents and additives The type of detergent depends on: • type of fabric (cottons , easy care/synthetics, delicate items, wool). Note: use only specific detergents for wool. • colour; • washing temperature; • degree and type of soiling. Notes: Whitish residues on dark fabrics are caused ...

  • Smeg GB ST L80 - page 9

    GB 7 PROGRAMME SELECTION Preparation of wash cycle 1. Load the machine, close the drum flaps and check that they are properly locked. 2. Add detergents and additives into th e dispenser to no more than the “MAX” level mark. Please refer to “Detergents and additives”. 3. Turn the programme selector knob to the desired programme. 4. Turn the ...

  • Smeg GB ST L80 - page 10

    GB 8 CLEANING THE FOREIGN BODY TRAP The washing machine is provided with a self-cleaning pump. The foreign body trap keeps objects like buttons, coins, safety-pins etc. which ha ve been left in the laundry. 1. Unplug the washing machine. 2. Open the foreign body tr ap cover with a coin. 3. Place a bowl beneath it. 4. Turn the foreign body trap slow ...

  • Smeg GB ST L80 - page 11

    GB 9 DRAINING RESIDUAL WATER CARE AND MAINTENANCE When should I drain residual water (draining problem)? • Before transporting (moving) the machine. • If the washing machine is instal led in a room subject to sub- zero temperatures. It is best in this case to drain the machine after every wash. 1. Stop the washing machine and unplug it. 2. Turn ...

  • Smeg GB ST L80 - page 12

    GB 10 Water inlet hose filter Check and clean regularly (at least two or three times a year). 1. Unplug the washing machine. 2. Turn off the tap. 3. Unscrew the hose from the tap. 4. Carefully clean the filter locate d at the end of hose, without assembling it, for exam ple with a tooth-brush. Note : For machines equipped w i t h h o s e t y p e ? ...

  • Smeg GB ST L80 - page 13

    GB 11 Washing machine exterior and control panel • Clean with a so ft damp cloth. • If necessary, a neutral househo ld cleaner can be applied (do not use aggressive or abrasive products). Lid seal • Clean from time to ti me with a damp cloth. Water inlet hose(s) • Check the hose regularly for brittleness and cracks. Replace if necessary. TR ...

  • Smeg GB ST L80 - page 14

    GB 12 *Final spin results are poor. Note: the washing machine has an unbalance detection and correction sy stem. If individual heavy items are loaded (a bathrobe, for example), this system may reduce the spin speed automatically or interrupt the spin if it de tects too great unbalance at the start of the spin, in or der to protect the washing machi ...

  • Smeg GB ST L80 - page 15

    GB 13 AFTER-SALES SERVICE Before contacting After-Sales Service: 1. Try to remedy the pr oblem yourself (see “Troubleshooting Guide”). 2. Restart the programme to check whether the problem has solved itself. 3. If the machine continues to function incorrectly, call After-Sales Service. Specify: • The nature of the problem. • The exact model ...

  • Smeg GB ST L80 - page 16

    GB 14 INSTALLATION Removal of transport bracket The washing machine is fitted with a transport bracket to avoid any possible dama ge during transport. Before using the washing machine, the transport bracket at the back MUST be r emoved. 1. Unscrew the two screws A and the four screws B with a flat screwdriver or a No . 8 hex nut box spanner. 2. Rem ...

  • Smeg GB ST L80 - page 17

    GB 15 Adjust the feet Install the washing machine on a level surface, near to electrical, water an d drain connections. If the floor is uneven, adjust the feet (do not insert pieces of wood, cardboard etc. under the feet): 1. Loosen the locknut usin g the wrench provided. 2. Adjust the height of the foot by hand. 3. Retighten the locknut by tu rnin ...

  • Smeg GB ST L80 - page 18

    GB 16 Water stop anti-flooding system (depending on model) • Screw the hose to the water su pply tap. Turn the tap fully on and check the water-ti ghtness of the connection. • The washing machine must not be connected to the mixing tap of a non-pressurized water heater! • The inlet hose and the pl astic enclosure contain (depending on model) ...

  • Smeg GB ST L80 - page 19

    GB 17 ELECTRICAL CONNECTION Do not use extension leads or multi sockets. Electrical connections must be made in accordance with local regulations. 1) Warning - this app liance must be earthed This appliance is no rmally supplied with a mains lead having a plug fitted in the factory which has been checked for correct earth continuity. If the fitted ...

Manufacturer Smeg Category Washer

Documents that we receive from a manufacturer of a Smeg GB ST L80 can be divided into several groups. They are, among others:
- Smeg technical drawings
- GB ST L80 manuals
- Smeg product data sheets
- information booklets
- or energy labels Smeg GB ST L80
All of them are important, but the most important information from the point of view of use of the device are in the user manual Smeg GB ST L80.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Smeg GB ST L80, service manual, brief instructions and user manuals Smeg GB ST L80. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Smeg GB ST L80.

Similar manuals

A complete manual for the device Smeg GB ST L80, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Smeg GB ST L80 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Smeg GB ST L80.

A complete Smeg manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Smeg GB ST L80 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Smeg GB ST L80, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Smeg GB ST L80, that we can find in the current document
3. Tips how to use the basic functions of the device Smeg GB ST L80 - which should help us in our first steps of using Smeg GB ST L80
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Smeg GB ST L80
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Smeg GB ST L80 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Smeg GB ST L80?

Use the form below

If you did not solve your problem by using a manual Smeg GB ST L80, ask a question using the form below. If a user had a similar problem with Smeg GB ST L80 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)