English dropdown-ico

Manual Smeg GCS90XG

17 pages 1.51 mb
Download

Go to site of 17

Summary
  • Smeg GCS90XG - page 1

    Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE ________________ 4 2. POSITIONING OF HOB ____________________________________ 6 3. ELECTRICAL CONNECTI ON _______________________________ 8 4. GAS CONNECTIO N _______________________________________ 9 5. ADAPTATION TO DIFFERENT TYPE S OF GAS _______________ 11 6. FINAL OPERATIONS ____________________ ...

  • Smeg GCS90XG - page 2

    Introduction 1. INSTRUCTIONS FOR SAFE AND PR OPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN A N ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE C OOKING HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE COOKING HOB. ALSO KEEP THE SERIES OF NOZZLES SUP ...

  • Smeg GCS90XG - page 3

    Introduction THE IDENTIFICATION PLATE, W ITH TECHNICAL DATA, SERIAL NUMBER AND MARKING IS CLEARLY VISIBLE UNDER TH E CASING. THE PLATE ON THE CASING MUST NOT BE REMOVED. BEFORE CONNECTING THE DEVICE, MAKE SURE THAT IT HAS BEEN REGULATED FOR THE TYPE OF GAS THAT WILL FEED IT, CHECKING THE LABEL UNDER THE CASING. DO NOT PUT PANS WITHOUT PERFECTLY S M ...

  • Smeg GCS90XG - page 4

    Instructions for the installer 6 2. POSITIONING OF HOB The following oper ation requires buildi ng and/or carp entry work so must be carried out by a competent tradesman. Installation can be carried out on var ious materials such as masonry, metal, solid wood or plastic laminated wood as lo ng as they are heat resistant (T 90°C). Never use silicon ...

  • Smeg GCS90XG - page 5

    Instructions for the installer 7 In case of installation on a holl ow compartment with doors, a separating panel has to be pl aced under the hob. Keep a min imum distance of 10 mm between the bottom of the unit a nd the panel surface. The pan el has to be easily removable to allow acces s in the event of technical service. ...

  • Smeg GCS90XG - page 6

    Instructions for the installer 8 3. ELECTRICAL CONNECTION Make sure that the voltage and capacit y of the power l ine conform to the data shown on the plate locat ed under the casing. Do not remove this plate for any reason. The plug on the end of the supply cable and the wall socket must be the same type and conform to the curr ent electrical syst ...

  • Smeg GCS90XG - page 7

    Instructions for the installer 9 4. GAS CONNECTION Connection to the gas mains may be made with a rigid copper pipe or with a flexible pipe and conforming to the prov isions defi ned by standard regulations in force. To facilitate connection, fitting A on the r ear of the appliance may be adjusted laterally. For this purpose, loos en hexagon nut B ...

  • Smeg GCS90XG - page 8

    Instructions for the installer 10 4.1 Connection to LPG Use a pressure regulator and make the con nection to the tank according to the provisions of stand ard s regulations in force. Make sure that feed pressure conforms to the lev els shown in the table in paragraph “ 5.2 Regulation for LPG ”. 4.2 Ventilation of rooms The hob may be installed ...

  • Smeg GCS90XG - page 9

    Instructions for the installer 11 5. AD APT A TION T O DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, detach the appliance from the electrical socket. The hob has been inspect ed for G20 (2H) natural gas at a pressure of 20 mbar. For functioning with other ty pes of gas the nozzles must be replaced and the primary air ad ...

  • Smeg GCS90XG - page 10

    Instructions for the installer 12 5.2 Regulation for LPG Loosen screw A and push supp ort B all the way. Use a double head wrench to remove nozzle C a nd assemble the suitable on e, following the instructions indicated in the referenc e charts, with respect to the type of gas to use. The screwing t orque of the nozzle shoul d never exceed 3 Nm . Re ...

  • Smeg GCS90XG - page 11

    Instructions for the installer 13 5.3 Regulation for natural gas The hob has been inspect ed for G20 (2H) natural gas at a pressure of 20 mbar. To allow the unit to work wit h this type of gas, perform the same operations described in paragraph “5.2 Regulation for LP G”, but choose the nozzles and regulate the primary ai r for natural gas, as s ...

  • Smeg GCS90XG - page 12

    Instructions for the installer 14 6. FINAL OPERA TIONS Having carried out the abov e adjustments, reassemble the appli ance following, backwards, the inst ructions in paragraph “ 5.1 Removing the hob ”. 6.1 Regulation of minimum for natural gas Replace the co mponents on the burner and slide the knobs on the gas tap pins. Light the burner and s ...

  • Smeg GCS90XG - page 13

    Instructions for the installer 15 6.3 Arrangement of burners on hob BURNERS 1 Auxiliary 2 Semi-rapid 3 Rapid 4 Double crow 6.4 Lubrication of gas taps After a while, the gas tap may become hard to turn or lock. If this happens, it has to be cleaned inside and re-greased. This must be done by a qualified technician. ...

  • Smeg GCS90XG - page 14

    Instructions for the user 16 7. USING THE HOB Before turni ng on the burners, make sure th at the burner rings, caps and grids have b een fitted correctly. In the ultrarapid burner, notch A must be aligned with pin B . Grid C provided is intended for use with woks (Chinese pans). Adapter D comes only with open gri ds models and is intended for use ...

  • Smeg GCS90XG - page 15

    Instructions for the user 17 7.2 Practical advice for using the burners For better burner performance and minimum gas consumption, flat bottomed, even recipie nts must be used, with covers and proportional in size to the burners (see paragraph “ 7.3 Diameter of containers ”). To avoid overcooking or dam age to the surface or to the glass cover ...

  • Smeg GCS90XG - page 16

    Instructions for the user 18 8. LEANING AND MAINTENANCE Never use a steam jet to clean the appliance. Before any intervention, disconnect the p ower supply of the device. 8.1 Cleaning Clean the cooking top regularly every time you use it, obv iously after it has cooled. 8.1.1 Regular daily cleaning of the hob In order to clean and preserve the su r ...

  • Smeg GCS90XG - page 17

    Instructions for the user 19 8.2 Cleaning of cooking hob components Grids, caps, flame cap crowns and burners can be removed for ease of cleaning. Wash them in warm water using a non-abras ive detergent, taking care to remove all tough spots. Before remo unting, allow the components to fully dry out . CAUTION: do not wash these components in a dish ...

Manufacturer Smeg Category Cooktop

Documents that we receive from a manufacturer of a Smeg GCS90XG can be divided into several groups. They are, among others:
- Smeg technical drawings
- GCS90XG manuals
- Smeg product data sheets
- information booklets
- or energy labels Smeg GCS90XG
All of them are important, but the most important information from the point of view of use of the device are in the user manual Smeg GCS90XG.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Smeg GCS90XG, service manual, brief instructions and user manuals Smeg GCS90XG. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Smeg GCS90XG.

Similar manuals

A complete manual for the device Smeg GCS90XG, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Smeg GCS90XG by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Smeg GCS90XG.

A complete Smeg manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Smeg GCS90XG - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Smeg GCS90XG, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Smeg GCS90XG, that we can find in the current document
3. Tips how to use the basic functions of the device Smeg GCS90XG - which should help us in our first steps of using Smeg GCS90XG
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Smeg GCS90XG
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Smeg GCS90XG in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Smeg GCS90XG?

Use the form below

If you did not solve your problem by using a manual Smeg GCS90XG, ask a question using the form below. If a user had a similar problem with Smeg GCS90XG it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)