Manual Sierra Products UV360FP

11 pages 0.86 mb
Download

Go to site of 11

Summary
  • Sierra Products UV360FP - page 1

    Sierra Products, Inc. 5061 Brooks St., Ste B Montclair, CA 91763 P/N 140790r2 03/2007 SIERRA UV36OFP OUTDOOR GAS FIREPLACE INSTALLATION AND OPERATING INSTRUCTIONS WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury, or loss of life. WARNING: This gas fireplace i ...

  • Sierra Products UV360FP - page 2

    2 WARNING: Any changes to this fireplace or its controls can be dangerous. WARNING: If the area in which the heater may be operated is smaller than that defined as an unconfined space, provide adequate combustion and ventilation air by one of the methods described in the National Fuel Gas Code, ANSI Z223.1 Section 5.3 or applicable local codes. SAF ...

  • Sierra Products UV360FP - page 3

    3 Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a professional service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that control compartments, burners and circulating air passa ...

  • Sierra Products UV360FP - page 4

    4 Figure 4 - Side Projection Clearance Figure 3 - Projection Clearance Figure 5 - Attaching Optional Trim FIG. 6 - Optional Remote (MV only) Figure 7- Mounting remote face plate Figure 8 - Control Assembly ATTACHING OPTIONAL TRIM 1. Attach the top SS trim piece onto fireplace cabinet by loosening existing (3) #8 Phillips screws, slide trim into pla ...

  • Sierra Products UV360FP - page 5

    5 Fig. 9 - Rough Opening for Floor Installation in Wall Figure 10 - Rough opening for Installing in Corner Figure 11 - Framing/Cabinet Mounting Holes NOTICE: A qualified person must connect fireplace to gas supply. Follow all local codes. CAUTION: Never connect heater directly to the propane supply. This heater requires an external regulator(not su ...

  • Sierra Products UV360FP - page 6

    6 CAUTION: Use only new, black iron or steel pipe. Internally-tinned copper tubing may be used in certain areas. Check your local codes. Use pipe of ½ ” diameter or greater to allow proper gas volume to fireplace. If pipe is too small, undue loss of pressure will occur. CAUTION: Use only pipe joint sealant that is resistant to liquid petroleum ( ...

  • Sierra Products UV360FP - page 7

    7 Figure 14 - Accessing burner assembly Figure 15 - Attaching Flexible Gas Lines Together WARNING: Test all gas piping and connections for leaks after installing or servicing. Correct all leaks at once. WARNING: Never use an open flame to check for a leak. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct ...

  • Sierra Products UV360FP - page 8

    8 Figure 18 - Setting logs and lava rock Figure 18A- Finished log & rock placement Figure 19 - Control and Ignitor Access PLACING LOGS AND LAVA ROCKS Assemble ceramic logs by placing the large base log to the rear of grate assembly (Figure 18) . Add front logs with “burned through” features to front left and right. Place lava rocks on cente ...

  • Sierra Products UV360FP - page 9

    9 WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life. FOR YOUR SAFETY, KEEP FIRE SCREENS CLOSED WHILE IN OPERATION . OPERATING INSTRUCTIONS FOR MANUAL SAFETY VALVE FOR YOUR SAFETY READ BEFORE LIGHTING A. This appliance has a pilot which must be lighted by ...

  • Sierra Products UV360FP - page 10

    5061 Brooks St., Ste B Montclair, CA 91763 www.sierraproductsinc.net 10 Item Qty Description P/N Item Qty Description P/N 1 1 Outer Surround 202181 11 1 V enturi w/ gasket 110299 2 1 Firebox 202183 12 1 Fireplace Hood SS 200740 3 1 SS Optional Trim (top piece) 200760 13 1 A ccess Door SS 202185 4 1 SS Optional Trim (left hand) 200761 14 2 Fireplace ...

  • Sierra Products UV360FP - page 11

    11 Sierra Outdoor Gas Fireplace Warranty Card Model #____________ Serial #_____________ Date Purchased _______/________/_______ Name __________________________________________ Dealer Name____________________________________ Address ________________________________________ City/State __________________________Zip _________ City/State _______________ ...

Manufacturer Sierra Products Category Outdoor Fireplace

Documents that we receive from a manufacturer of a Sierra Products UV360FP can be divided into several groups. They are, among others:
- Sierra Products technical drawings
- UV360FP manuals
- Sierra Products product data sheets
- information booklets
- or energy labels Sierra Products UV360FP
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sierra Products UV360FP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sierra Products UV360FP, service manual, brief instructions and user manuals Sierra Products UV360FP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sierra Products UV360FP.

A complete manual for the device Sierra Products UV360FP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sierra Products UV360FP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sierra Products UV360FP.

A complete Sierra Products manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sierra Products UV360FP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sierra Products UV360FP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sierra Products UV360FP, that we can find in the current document
3. Tips how to use the basic functions of the device Sierra Products UV360FP - which should help us in our first steps of using Sierra Products UV360FP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sierra Products UV360FP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sierra Products UV360FP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sierra Products UV360FP?

Use the form below

If you did not solve your problem by using a manual Sierra Products UV360FP, ask a question using the form below. If a user had a similar problem with Sierra Products UV360FP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)