English dropdown-ico

Manual Genie 3452535556 PCG

27 pages 1.05 mb
Download

Go to site of 27

Summary
  • Genie 3452535556 PCG - page 1

    3452535556 Included W all Control MUST be installed prior to operation of this Garage Door Operator Safe-T -Beam ® Safety Reverse System Must be installed to close door SA VE THIS MANUAL FOR FUTURE REFE RE NC E NOTE: Y our Residential Operator comes with a Rail Assembly which is standard for up to a 7 foot 6 inch high door . An extension kit for a ...

  • Genie 3452535556 PCG - page 2

    6 To avoid damage to your door and/or operator , make sure you disable any door locks prior to installing your operator . 2 PRE-INST ALLA TION CHECK LIST FOR HELP-1.800.354.3643 OR GENIECOMP ANY .COM Things to consider if you are planning to “do-it-yourself.” In many ca se s you will be replacing an existing door operator with a new one, howeve ...

  • Genie 3452535556 PCG - page 3

    3 7 TYPICAL SECTIONAL DOOR INST ALLA TION FOR HELP-1.800.354.3643 OR GENIECOMP ANY .COM TYPICAL SUPPORT BRACKET EXTENSION SPRING OR T ORSION SPRING SAFE-T -BEAM ® BRACES ADDED HEADER BRACKET MOUNTING BOARD TYPICAL 1-PIECE DOOR INST ALLA TION 48" POWER CORD TO 120V GROUNDED OUTLET 4 1 3 6 2 3 5 SECTIONAL DOOR 1-PIECE DOOR ...

  • Genie 3452535556 PCG - page 4

    4 SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PA G E PRE-INST ALLA TION CHECKS . . . . . . . . . . . . . . . . . . . . . . . . . . 2- 3 OPERA TOR FEA TURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SAFETY FEA TURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Genie 3452535556 PCG - page 5

    5 RECOMMENDED TOOLS FOR HELP-1.800.354.3643 OR GENIECOMP ANY .COM 5/32" Drill Bit 7/16" and 9/16" Sockets Step ladder Drill Ratchet Carpenter ’ s level Pencil T ape measure Wire strippers Phillips screwdriver Adjustable wrench PA R TS IDENTIFICA TION - Not Shown Full Size . 30 40 Single-button remote control Multi-button remote con ...

  • Genie 3452535556 PCG - page 6

    6 1-PIECE RAIL HARDW ARE EXPLODED VIEW FOR HELP-1.800.354.3643 OR GENIECOMP ANY .COM [ 2 ] 3-PIECE RAIL HARDW ARE EXPLODED VIEW [ 4 ] 10 3 9 11 25 15 16 23 28 17 27 25 26 42 24 20 12 18 47 22 9 10 41 41 10 13 39 12 10 39 14 8 9 22 18 47 7 26 42 20 24 6 9 15 11 16 23 28 9 10 5 17 27 25 22 22 39 13 14 39 1 1 48 ...

  • Genie 3452535556 PCG - page 7

    Power Head Assembly 1J 1N 1X 1L 1N 1E 1K 1D 1A 1N 1H 1B 1Q 1G 1D 1F 49 1P 1M 1N 7 Item Part Name Number Required 1 pc. rail 3 pc. rail 1P ower head assembly (box) 11 2R ail assembly (1-piece) (box) 1 3 Rail (1-piece) (box) 1 4 Rail assembly (3-piece)(items 5, 6, 7) (box) 1 5F i rst rail section (box) 1 6M i ddle rail section (box) 1 7 End rail sect ...

  • Genie 3452535556 PCG - page 8

    FIG. 1-4 Attach rail strap . 8 OPERA T OR ASSEMBL Y FOR HELP-1.800.354.3643 OR GENIECOMP ANY .COM 1 NOTE: For 1-piece rail—skip to step 4. 1. Identify the rail sections (Fig. 1-1) . • First rail section (attaches to power head). – 2 holes each end. – Half-circle notch 1 end. – Motor end has no notch. • Middle rail section . – 2 holes ...

  • Genie 3452535556 PCG - page 9

    FIG. 1-5 Align arro w . FIG. 1-8 Attach emer gency release cord & tag . 9 6. Attach rail to power head . • Place rail in front of power head with rail strap at opposite end. • Support door end of rail (rail strap) at about same height as power head. – Check if magnet is in place (Fig. 1-6 inset) . Insert carriage slide into rail (Fig. 1-6 ...

  • Genie 3452535556 PCG - page 10

    10 10. Attach limit switch wires . • Uncoil limit switch wires. – Place into channels located along top of rail . – Run wires back to power head through hole in top of power head (Fig. 1-12) . – Use wire clips to hold wires in place (Fig. 1-13) . • Attach limit switch wires to terminals on power head (Fig. 1-14) . – White wire (“OPEN? ...

  • Genie 3452535556 PCG - page 11

    FIG. 2-1 Finding highest point of travel (sectional) . 11 INST ALLA TION FOR HELP-1.800.354.3643 OR GENIECOMP ANY .COM 2 IMPORT ANT 1. READ AND FOLLOW ALL SAFETY , INST ALLA TION AND OPERA TION INSTRUCTIONS. If you have questions or do not understand an instruction, call The Genie Company or an authorized Genie Dealer . 2. Do Not install operator o ...

  • Genie 3452535556 PCG - page 12

    12 NOTE: If header bracket location needs to be above header for garage door opening, you need to add a “mounting surface.” A 2" x 6" board securely attached (fasteners not included) across wall studs on either side of your mark is sufficient (Fig. 2-4) . OPEN ORANGE P ARTS BAG 2. Mounting the header bracket . NOTE: Although header br ...

  • Genie 3452535556 PCG - page 13

    Mounting Straps [22] 13 MOUNTING THE OPERA T OR: 1. Getting Started . • Position rail/power head assembly (Fig. 2-7) . – Rail strap leaning on wall next to header bracket. – Place material on floor under power head to protect from scratching. (A box, stool, or similar device may be needed to clear a torsion spring, as shown.) 2. Mounting the ...

  • Genie 3452535556 PCG - page 14

    INST ALL DOOR ARMS: Sectional doors OPEN YELLOW P ARTS BAG 1. Attach the arms . • Fasten curved door arm to door bracket using clevis pin (24) and cotter pin (25) (Fig. 2-10) . • Straight arm to carriage using clevis pin (24) and cotter pin (25) (Fig. 2-10) . 2. Connecting the arms . • Slide carriage back and forth to adjust arm length. – O ...

  • Genie 3452535556 PCG - page 15

    3. Wiring . • Route wire (29) using either method shown (Fig. 3-5) . • Wires along rail are held in place with wire clips. – Wires can be slipped under the wire clips already in place. 15 SAFE-T -BEAM ® SYSTEM INST ALLA TION FOR HELP-1.800.354.3643 OR GENIECOMP ANY .COM 3 NOTE: The operator will not close the door automatically unless the Sa ...

  • Genie 3452535556 PCG - page 16

    FIG. 3-8 T erminal attachments at power head . OPEN RED P ARTS BAG 3. Wiring (cont’) . • Securely fasten wires to wall as you go. – Use insulated staples (included). – Staples should be snug only . 16 • Make wire attachments at “ STB ’ s. ” – Splitting and stripping wire ends to be connected as shown (Fig. 3-6) . – Loosen termin ...

  • Genie 3452535556 PCG - page 17

    FIG. 5-1 T erminal attachments at power head . W ALL CONTROL INST ALLA TION FOR HELP-1.800.354.3643 OR GENIECOMP ANY .COM 4 1. Finding the mounting location . • Pick a convenient location for mounting wall control. – Location you choose should be in direct sight of door . – It should be at least 5' above floor to prevent small children f ...

  • Genie 3452535556 PCG - page 18

    18 CONNECTING TO POWER FOR HELP-1.800.354.3643 OR GENIECOMP ANY .COM 5 1. Plug the operator into a properly grounded electrical outlet . 2. Check Safe-T -Beam ® alignment (Fig. 6-3) . To reduce the risk of electrical shock, this equipment has a grounded type plug that includes a third ( grounding ) pin. This plug will only fit a grounded type outl ...

  • Genie 3452535556 PCG - page 19

    19 LIMIT SWITCH / FORCE ADJUSTMENT FOR HELP-1.800.354.3643 OR GENIECOMP ANY .COM 6 NOTE: During operator cycling for force adjustment, the motor protector may shut off power to the operator . If this occurs, wait about 20 minutes to allow the motor protector to reset. 1. Adjusting limit switches. • Locate force control knobs on power head (Fig. 7 ...

  • Genie 3452535556 PCG - page 20

    FCC and IC CER TIFIED 20 PROGRAMMING REMOTE CONTROLS 7 FIG. 8-1 Learn code button and LED 1. Programming . • Locate learn code button and indicator LED on front of power head (under force adjustment screws) (Fig. 8-1) . • Press and release learn code button. – Indicator LED will blink at a rate of twice per second. • Wi thin 30 seconds , pu ...

  • Genie 3452535556 PCG - page 21

    21 MUL TI-BUTT ON REMOTE 1. Programming . NOTE: Each button on a multi-button remote is designed for use with 1 door . Y ou cannot pro- gram 2 buttons to operate the same door , nor can you program 1 button to operate 2 doors. • For each button . – Program each button separately . – Follow single button remote procedure (previous page) for ea ...

  • Genie 3452535556 PCG - page 22

    22 IMPORT ANT SAFETY INSTRUCTIONS 1. READ AND FOLLOW ALL INSTR UCTIONS. 2. Nev er let children operate or pla y with the door controls . K eep the remote control a wa y from children. 3. Alwa ys keep the mo ving door in sight and a wa y from people and objects until the door is completely closed. NO ONE SHOULD CR OSS THE P A TH OF THE MO VING DOOR. ...

  • Genie 3452535556 PCG - page 23

    23 TROUBLESHOOTING GUIDE (CONTINUED) FOR HELP-1.800.354.3643 OR GENIECOMP ANY .COM • Check lock switch on wall console. • Check power source. – Plug a lamp into outlet used for power head If lamp works, power source is OK. – If not, check fuse or circuit breaker . • Power is OK. – Check connections at power head terminals. – Check con ...

  • Genie 3452535556 PCG - page 24

    24 WIRING DIAGRAM FOR HELP-1.800.354.3643 OR GENIECOMP ANY .COM Tr ansmitters comply with all United States and Canadian legal requirements as of the date of manufacture . No warranty is made that they comply with all legal requirements of an y other jurisdiction. If transmitters are to be used in another countr y , the i mpor ter m ust determine c ...

  • Genie 3452535556 PCG - page 25

    A No C .O.D . shipments. Please include chec k or money order , do not send cash. Allow 3-4 weeks f or deliv er y . We accept Visa or Mastercard phone orders. 1.800.354.3643. Please hav e par t number and credit card ready . Please add local sales tax if y ou reside in one of the states listed. California Connecticut Florida Georgia Illinois Indian ...

  • Genie 3452535556 PCG - page 26

    MODEL DESCRIPTION PRODUCT CODE PRICE (US$)* QTY . TOT AL MODELO DESCRIPCIÓN CÓDIGO PRECIO* CANTIDAD TOT AL MODÈLE DESCRIPTION CODE DU PRODUIT PRIX ($ US)* QTÉ T OT AL Delux e Remote Control with Intellicode ® GIT -1 Controlador remoto de lujo con Intellicode ® 33069R $34.95 Télécommande de lux e av ec Intellicode ® 2-Button Remote Control ...

  • Genie 3452535556 PCG - page 27

    C The Genie Company Professional Access Systems LIMITED W ARRANTY What is covered: Any defect in material and product workmanship from personal, normal household use in accordance with the Owner ’ s Manual. For how long: H2000C-1 Series - 3 years on Motor , and 1 year on all other parts. 350L- 1 Series - 3 years on Motor , and 1 year on all other ...

Manufacturer Genie Category Garage Door Opener

Documents that we receive from a manufacturer of a Genie 3452535556 PCG can be divided into several groups. They are, among others:
- Genie technical drawings
- 3452535556 PCG manuals
- Genie product data sheets
- information booklets
- or energy labels Genie 3452535556 PCG
All of them are important, but the most important information from the point of view of use of the device are in the user manual Genie 3452535556 PCG.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Genie 3452535556 PCG, service manual, brief instructions and user manuals Genie 3452535556 PCG. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Genie 3452535556 PCG.

Similar manuals

A complete manual for the device Genie 3452535556 PCG, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Genie 3452535556 PCG by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Genie 3452535556 PCG.

A complete Genie manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Genie 3452535556 PCG - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Genie 3452535556 PCG, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Genie 3452535556 PCG, that we can find in the current document
3. Tips how to use the basic functions of the device Genie 3452535556 PCG - which should help us in our first steps of using Genie 3452535556 PCG
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Genie 3452535556 PCG
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Genie 3452535556 PCG in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Genie 3452535556 PCG?

Use the form below

If you did not solve your problem by using a manual Genie 3452535556 PCG, ask a question using the form below. If a user had a similar problem with Genie 3452535556 PCG it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)