English dropdown-ico

Manual Toro 835S

9 pages 2.27 mb
Download

Go to site of 9

Summary
  • Toro 835S - page 1

    Installation Procedure ____________________________________________________________ T o assure maximum performance from your 800S series sprinklers, read these instructions completely prior to installation or service. Constructing Swing Joints 1. Construct or provide triple swing joints for each sprinkler as shown in Figure 1 . Use PVC or ABS pipe ...

  • Toro 835S - page 2

    2 Connecting Hydraulic Control T ubing (Hydraulic Models Only) 1. Route control tubing from the controller to the sprinkler location(s). Note: Leave an 18" (45.7 cm) service loop of tubing at each sprinkler to facilitate movement of sprinkler and service operations. Refer to T able 2 for tubing run length and sprinkler elevation information. 2 ...

  • Toro 835S - page 3

    Arc Adjustment Procedure ________________________________________________________ The 835S and 855S sprinkler models can be operated in full-circle or part circle operation. In part-circle operation, the sprinkler arc can be adjusted from 40°– 330°. When full-circle (360°) operation is selected, the sprinkler will rotate in a clockwise directi ...

  • Toro 835S - page 4

    4 Adjustment Band Angle Indicators The adjustment band of the 835S and 855S have markers at predetermined arcs. By aligning the adjustment band indicators to the turret arrow , you can set the sprinkler arc to 90°, 180°, 270° or 360°. T rajectory Adjustment Procedure ___________________________________________________ The 835S and 855S sprinkle ...

  • Toro 835S - page 5

    Pilot V alve Operation (Electric Models Only) __________________________________________ The main function of the pilot valve is to control the operation of the main valve located in the base of the sprinkler body . The main valve is operated by the release of water metered through the pilot valve when it is activated either manually at the sprinkl ...

  • Toro 835S - page 6

    Main V alve PROBLEM POSSIBLE CAUSE – CORRECTIVE ACTION V alve won't close (a) Continuous 24 V AC to sprinkler . (Electric ) – Check controller for voltage source. (b) Leak in pilot valve assembly . – Replace pilot valve assembly . (c) Plugged supply screen on piston. – Clean or replace screen. (d) Manual control selector on pilot valve ...

  • Toro 835S - page 7

    7 Service Procedures ______________________________________________________________ Servicing Sprinkler Mechanism Note: Refer to Figure 13 for the following procedure. 1. Remove the cap screw (1) and cap (2). Note: During reassembly , ensure the cap is correctly installed with the T oro Logo positioned over the main nozzle (10). 2. Insert the hooke ...

  • Toro 835S - page 8

    Servicing Main V alve 1. See W arning above. T o remove valve assembly , squeeze snap ring ears together with snap ring pliers (P/N 995-100) and remove snap ring from sprinkler body . See Figure 16 . 2. Use valve removal tool P/N 995-08 for 835S or 995-09 for 855S to remove valve assembly from base of sprinkler body . V alve removal tool is inserte ...

  • Toro 835S - page 9

    Servicing Pilot V alve Note: Refer to Figure 19 for the following procedure. 1. Make sure that the water supply to sprinkler is positively shut off and any residual pressure has been bled of f. If the sprinkler is pressurized, main valve will open when the pilot valve is disconnected from control tube. 2. Carefully remove turf and soil from the sid ...

Manufacturer Toro Category Sprinkler

Documents that we receive from a manufacturer of a Toro 835S can be divided into several groups. They are, among others:
- Toro technical drawings
- 835S manuals
- Toro product data sheets
- information booklets
- or energy labels Toro 835S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Toro 835S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Toro 835S, service manual, brief instructions and user manuals Toro 835S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Toro 835S.

Similar manuals

A complete manual for the device Toro 835S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Toro 835S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Toro 835S.

A complete Toro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Toro 835S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Toro 835S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Toro 835S, that we can find in the current document
3. Tips how to use the basic functions of the device Toro 835S - which should help us in our first steps of using Toro 835S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Toro 835S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Toro 835S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Toro 835S?

Use the form below

If you did not solve your problem by using a manual Toro 835S, ask a question using the form below. If a user had a similar problem with Toro 835S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)