English dropdown-ico

Manual Honeywell Solaris 7820

64 pages Not applicable
Download

Go to site of 64

Summary
  • Honeywell Solaris 7820 - page 1

    7820 Solaris Bar Code Scanner User’s Guide ...

  • Honeywell Solaris 7820 - page 2

    Disclaimer Honeyw ell International Inc. (“HII”) reserves the right to make changes in specifications and other information cont ained in this document without prior notice, and the reader should in all case s consult HII to determine w hether any such changes have been made. The information in this publication does not represent a commitment o ...

  • Honeywell Solaris 7820 - page 3

    ii T ABLE OF C ONTENTS I NTRODUCTION Product Over view ............................................................................................. 1 Applications and Protocols ................................................................................ 2 Scanner and Acce ssories ................................................................ ...

  • Honeywell Solaris 7820 - page 4

    iii T ABLE OF C ONTENTS Power Save Modes ......................................................................................... 37 Touch Button Panel ........................................................................................ 38 M A INTENANCE Replaceable Protective Outer Wi ndow ...................................................... ...

  • Honeywell Solaris 7820 - page 5

    1 I NTRODUCTION P RODUCT O VERVIEW The 7820 Solaris vertical mini-slot scanner increases productivity with an unmatched feature set that aggressively scans high-density codes and fits easily into any existing enclosure found in sma ll item, high-volume retail environments. Every scanner comes standard w ith an integrated RF EAS antenna, Checkpoint ...

  • Honeywell Solaris 7820 - page 6

    2 I NTRODUCTION A PPLICATIONS AND P ROTOCOLS The model number on each scanner incl udes the scanner number and factory- default communications protocol. S CANNER C OMMUNICATION P ROTOCOL ( S ) 7820 RS232, Keyboard Wedge, USB, Auxiliary, RS485 The 7820 bar code scanner with Built-in PC Keyboard Wedge Interface is designed to be used for keyboard emu ...

  • Honeywell Solaris 7820 - page 7

    3 I NTRODUCTION S CANNER AND A CCESSORIES B AS I C K IT C OMPONENTS Part # Description MS7820 Bar Code Scanner 00-02407 MetroSelect ® Configuration Guide 00-02283 7820 Bar Code Scanner User’s Guide 57-57312-3 7820 EAS Cable - Checkpoint (External) 57-57313-3 7820 EAS Cable - Sensormatic (External) Guides also available for download at www.honeyw ...

  • Honeywell Solaris 7820 - page 8

    4 I NTRODUCTION S CANNER AND A CCESSORIES O PTIONAL A CCESSORIES Part # Description AC to DC Pow er Transformer – Reg ulated 12V@ 1.25A output 46-00862 Power Supply, United States / Japan 46-00863 Power Supply, Continental Europe 46-00864 Power Supply, United Kingdom 46-00865 Power Supply, China 46-00866 Power Supply, Australia Part # Description ...

  • Honeywell Solaris 7820 - page 9

    5 I NTRODUCTION S CANNER AND A CCESSORIES O PTIONAL A CCESSORIES Part # Description 46-00868 7820 Flex Stand Kit Flex Stand, Kit Components 1. Tall Flex Pole Cover ...................................................................... Qty. 1 2. Tall Flex Pole ................................................................................. Qty . 1 ...

  • Honeywell Solaris 7820 - page 10

    6 I NTRODUCTION S CANNER AND A CCESSORIES O PTIONAL A CCESSORIES Part # Description 46-00869 7820 Wall Mount Stand Kit Wall Mount Stand, Kit Components 1. Short Flex Pole .............................................................................. Qty. 1 2. Short Flex Po le Cover ................................................................... ...

  • Honeywell Solaris 7820 - page 11

    7 I NTRODUCTION 7820 S CANNER D ESIGN S PECIFICATIONS  O PERA TIONAL Light Source: V isible L aser D iode (VLD) @ 650 nm Laser Power: 0.900 mW (peak) Embedded Laser: Max Optical Powe r: 10 mW Wavelength: 650 nm Depth of Field: 0 mm to 255.0 mm (0"- 10.0") for 0.33 mm (13 mil) bar code Width of Scan Field: 38 mm (1.5") @ 15 mm (0.6 ...

  • Honeywell Solaris 7820 - page 12

    8 I NTRODUCTION 7820 S CANNER D ESIGN S PECIFICATIONS E LECTRICAL Input Voltage: 12VDC ± 0.25V Power: 4.8 W Operating Current: 320 mA DC Transformers: Class II; 12VDC @ 1.25A For Regulatory Compliance info rmation, see pages 52 - 54. E NVIRONMENTAL Operating Temperat ure: 0°C to 40°C (32°F to 104°F) Storage Temperature: -40°C to 60°C (-40°F ...

  • Honeywell Solaris 7820 - page 13

    9 B ASE M ODEL C HARACTERISTICS 7820 S CANNER Components Figure 1. 7820 Bar Code Scanner Parts  Scratch Resistant Output Window (Laser Aperture)  Power Save Button  Volume Button  Blue Indicator LED  Speaker  Tone Button  Cable Connection Area ...

  • Honeywell Solaris 7820 - page 14

    10 B ASE M ODEL C HARACTERISTICS 7820 S CANNER Dimensions Figure 2. 7820 Bar Code Scanner Dimensions Connector Panel Figure 3. 7820 Connector Panel Layout ...

  • Honeywell Solaris 7820 - page 15

    11 B ASE M ODEL C HARACTERISTICS 7820 S CANNER Caution and Serial Number Labels Figure 4 . 7820 Label Location (Top) & Sample Label (Below) Caution To maintain compliance with applicable standards, all circuits connect ed to the scanner must meet the requirements for SE LV (S afety E xtra L ow V oltage) according to EN/IEC 60950-1. To maintain ...

  • Honeywell Solaris 7820 - page 16

    12 B ASE M ODEL C HARACTERISTICS 7820 S CANNER Dust Labels The EAS and AUX Connectors are covered by dust labels, shown below . Peel off the label to access the connecto r needed. Keep the dust label on the connector not in use. Figure 5 . 7820 Label Location (Top) & Label (Below) ...

  • Honeywell Solaris 7820 - page 17

    13 Figure 6. Keyboard Wedge Interfaces ³ 999998 Recall Defaults I NSTALLATION C ABLE I NSTALLATION (I NT ERFACE S PECIFIC ) Keyboard Wedge 1. Turn off the host system. 2. Disconnect the keyboard from the host. 3. Connect the keyed VLink cable to the 10-pin Multi-Interface jack. It is the only circular keyed jack located on the bottom of the 7820 ( ...

  • Honeywell Solaris 7820 - page 18

    14 Figure 7. USB, Interface ³ 999998 Recall Defaults I NSTALLATION C ABLE I NSTALLATION (I NT ERFACE S PECIFIC ) USB 1. Connect the keyed VLink cable to the 10-pin Multi-Interface jack. It is the only circular keyed jack located on the bottom of the 7820 (see figure 7) . 2. Connect the other end of the USB cable to the host. Before continuing, ver ...

  • Honeywell Solaris 7820 - page 19

    15 Figure 8. RS232 Interface ³ 999998 Recall Defaults I NSTALLATION C ABLE I NSTALLATION (I NT ERFACE S PECIFIC ) RS232 1. Turn off the host system. 2. Connect the keyed VLink cable to the 10-pin Multi-Interface jack. It is the only circular keyed jack located on the bottom of the 7820 (see figure 8). 3. Connect the other end of the VLink cable to ...

  • Honeywell Solaris 7820 - page 20

    16 Figure 9. RS485 Interface ³ 999998 Recall Defaults I NSTALLATION C ABLE I NSTALLATION (I NT ERFACE S PECIFIC ) RS485 1. Turn off the host system. 2. Connect the keyed cable to the 10-pin Multi-Interface jack. It is the only circular keyed jack located on the bottom of the 7820 (see figure 9) . 3. Connect the other end of the cable to the host. ...

  • Honeywell Solaris 7820 - page 21

    17 I NSTALLATION C ABLE I NSTALLATION (S ECONDARY H ONEYWELL S CANNER ) 1. Turn off the host system. 2. Connect the round end of the VLink RS232 AUX cable [PN 57-57170-3] to the RS232 ja ck of the auxiliary scanner ( see figure 10 on page 19 ). 3. Connect the other end of the VLink RS232 AUX cable into the Auxiliary ( AUX ) jack, which is located d ...

  • Honeywell Solaris 7820 - page 22

    18 I NSTALLATION C ABLE I NSTALLATION (S ECONDARY H ONEYWELL S CANNER ) 11. Scan the following bar code to conf igure the auxiliary port on the 7820 to accept a Honeyw ell scanner as the secondary scanner. The following bar codes do not apply when using an MS6720 as a secondary scanner. If the secondary scanner is not a Honey well scanner, refer to ...

  • Honeywell Solaris 7820 - page 23

    19 I NSTALLATION C ABLE I NSTALLATION (S ECONDARY H ONEYWELL S CANNER ) Figure 10. Connector Orientation (Top) Auxiliary Scanner Setup (Bottom) See SELV Power caution statement located on page 11 of this manual . ...

  • Honeywell Solaris 7820 - page 24

    20 I NSTALLATION  EAS D EACTIVATION SW1 and SW2 are the switch banks inside the Checkpoint device that set the deactivation range. Honeyw ell recomm ends end users program the 7820 bar code scanner to the Short Range* , so that the unit does not scan out beyond the deactivation range. Unit # Checkpoint Recommended Sw itch Bank Settings 7820 Dept ...

  • Honeywell Solaris 7820 - page 25

    21 I NSTALLATION  F LEX S TAND I NSTALLATION , PN 46-00868 1. Drill four #39 pilot holes in the counter top for t he stand base plate. Figure 12. Base Plate Hole Pattern 2. Attach the flex pole assembly and se cure the base plate to the counter. Slide the flex cover over the flex pole assembly. Once the flex pole has been assembled, mount the st ...

  • Honeywell Solaris 7820 - page 26

    22 I NSTALLATION F LEX S TAND I NSTALLATION 3. Remove the scanner’s back plate from the rear side of the unit. Apply pressure to the points shown in Figure 15 until the back plate unlatches from the scanner. Figure 15. Cable Cover Removal 4. Slide the bottom mount ing plate off the scanner. Figure 16. Mounting Plate Removal ...

  • Honeywell Solaris 7820 - page 27

    23 I NSTALLATION F LEX S TAND I NSTALLATION 5. Attach the scanner mounti ng plate to the flex pole. Figure 17. Secure mounting plate to flex pole. 6. Slide the scanner onto t he mounting plate until the pl ate is fully seated into the scanner. Figure 18. Slide mounting plate into scanner. 7. Before installing the scanner’s cable cover, refer to p ...

  • Honeywell Solaris 7820 - page 28

    24 I NSTALLATION  W ALL M OUNT S T AND I NSTALLATION , PN 46-00869 1. Locate the area on the wall w here the scanner w ill be mounted and drill four #39 pilot holes in the wall for the stand base plate. Figure 20. Base Plate Hole Pattern 2. Attach the flex pole assembly to the Wall Mount plate. Slide the flex cover over the flex pole assembly. F ...

  • Honeywell Solaris 7820 - page 29

    25 I NSTALLATION W ALL M OUNT S T AND I NSTALLATION 3. Remove the scanner’s back plate from the rear side of the unit. Apply pressure to the points shown in Figure 22 until the back plate unlatches from the scanner. Figure 22. Cable Cover Removal 4. Slide the bottom mount ing plate off the scanner. Figure 23. Mounting Plate Removal ...

  • Honeywell Solaris 7820 - page 30

    26 I NSTALLATION  W ALL M OUNT S T AND I NSTALLATION 5. Secure the w all mounting plate to the wall location designated in Step 1 and assemble the remaining parts as shown in Figure 24 . Figure 24. Scanner Mounting Plate Assembly 6. Slide the scanner onto t he mounting plate until the pl ate is fully seated into the scanner. Figure 25. Slide mou ...

  • Honeywell Solaris 7820 - page 31

    27 I NSTALLATION  W ALL M OUNT S T AND I NSTALLATION 7. Before installing the scanner’s cable cover, refer to pages 13-20 for instructions on the proper cable connections. 8. Re-Install the scanner’s back plate to lock- in the bottom mounting plate. Figure 26. Install back plate ...

  • Honeywell Solaris 7820 - page 32

    28 S CANNER O PERATION  S CAN Z ONE (B ASED ON 100% UPC B AR C ODES ) Figure 27. Scan Area Top View (top) Side View (Bottom) Specifications are subjec t to change without notice. ...

  • Honeywell Solaris 7820 - page 33

    29 S CANNER O PERATION  D EPTH OF F IELD BY M INIMUM B AR C ODE E LEMENT W IDTH (B ASED ON 100% UPC B AR C ODES ) Figure 28. Depth of Field Top View Long Range Mode Minimum Bar Code Element Width Long Range Mode A B C D E mm .132 .190 .264 .330 .660 mils 5.2 7.5 10.4 13.0 26.0 Specifications are subjec t to change without notice. ...

  • Honeywell Solaris 7820 - page 34

    30 S CANNER O PERATION  D EPTH OF F IELD BY M INIMUM B AR C ODE E LEMENT W IDTH (B ASED ON 100% UPC B AR C ODES ) Figure 29. Depth of Field Side View Long Range Mode Minimum Bar Code Element Width Long Range Mode A B C D E mm .132 .190 .264 .330 .660 mils 5.2 7.5 10.4 13.0 26.0 Specifications are subjec t to change without notice. ...

  • Honeywell Solaris 7820 - page 35

    31 S CANNER O PERATION  D EPTH OF F IELD BY M INIMUM B AR C ODE E LEMENT W IDTH (B ASED ON 100% UPC B AR C ODES ) Figure 30. Depth of Field Top View Short Range Mode Minimum Bar Code Element Width Short Range Mode A B C mm .190 .264 .330 mils 7.5 10.4 13.0 Specifications are subjec t to change without notice. ...

  • Honeywell Solaris 7820 - page 36

    32 S CANNER O PERATION  D EPTH OF F IELD BY M INIMUM B AR C ODE E LEMENT W IDTH (B ASED ON 100% UPC B AR C ODES ) Figure 31. Depth of Field Side View Short Range Mode Minimum Bar Code Element Width Short Range Mode A B C mm .190 .264 .330 mils 7.5 10.4 13.0 Specifications are subjec t to change without notice. ...

  • Honeywell Solaris 7820 - page 37

    33 S CANNER O PERATION  I NDICATOR D ESCRIPTIONS Audible When the 7820 scanner is in operation, it provides audible feedback. These sounds indicate the status of the scanner. Eight settings are available for the tone of the beep (normal, 6 alternate tones and no t one). To change the tone, use the Tone Button or refer to the MetroSelect Configur ...

  • Honeywell Solaris 7820 - page 38

    34 S CANNER O PERATION  I NDICATOR D ESCRIPTIONS Visual There is a blue LED on the top of the 7820 as well as three illuminated buttons on the front. When the scanner is on, the flashing or constant illumination of the LED indicates the stat us of the current scan and the scanner. Figure 32. LED No Blue LED The LEDs will not be illuminated if th ...

  • Honeywell Solaris 7820 - page 39

    35 S CANNER O PERATION  I NDICATOR D ESCRIPTIONS Failure Modes Figure 33. LED Flashing BLUE LED and One Razzberry Tone This indicates the scanner has experienced a laser subsystem failure. Return the unit for repair at an authorized service center. Fl a sh in g Blue LED and Tw o Ra z zb er ry Tones This indicates the scanner has experienced a mo ...

  • Honeywell Solaris 7820 - page 40

    36 S CANNER O PERATION  I NDICATOR D ESCRIPTIONS Diagnostic Indicator Display There is a green colored (when illuminated) single digit error code display located to the left of the scanner’s mirrored polygon (see figure to the right). E RROR C ODE D ESCRIPTION 0 RAM ERROR – The scanner’s Random Access Memory (RAM) is tested as faulty. Retu ...

  • Honeywell Solaris 7820 - page 41

    37 S CANNER O PERATION  P OWER S AVE M ODES The 7820 bar code scanner has five configurable power save modes. Refer to the MetroSelect Configuration Guide for additional information on Power Save Modes. 1. Blink Power Save Mode: “Blinks” the laser OFF & ON afte r a configured period of non-use. When the scanner recognizes a bar code, it ...

  • Honeywell Solaris 7820 - page 42

    38 S CANNER O PERATION  T OUCH B UTTON P ANEL  Figure 35. The Touch Button Panel Operation C HANGING T HE B EEPER T ONE Touch the Tone button once and the beeper tone will change. The new tone will be heard. Then two more of the new tones w ill be heard signifying the new setting has been set. C HANGING T HE B EEPER V OLUME Touch the Volume B ...

  • Honeywell Solaris 7820 - page 43

    39 M AINTENANCE  R EPLACEABLE P ROTECTIVE O UT ER W INDOW The 7820 bar code scanner includes a r eplaceable protective outer window , which protects the flat-screen w indow from scratches when used in harsh scanning environments. D AILY M AINTENANCE  Smudges and dirt on the unit's window can in terfere w ith the unit's performance. ...

  • Honeywell Solaris 7820 - page 44

    40 M AINTENANCE  C ABLE R EMOVAL  Turn the host power off and disconnect t he pow er supply from the cable before attempting to disconnect the cable from the unit. Remove the scanner’s back plate from the rear side of the unit. Apply pressure to the points shown in Figure 41 until the back plate unlat ches from the scanner. Figure 41. Cable ...

  • Honeywell Solaris 7820 - page 45

    41 T ROUBLESHOOTING G UIDE The following guide is for reference purpos es only. Contact a customer service representative to preserve t he limited warranty terms on page 56. 7820 S ERIES T ROUBLESHOOTING G UIDE SYMPTOMS POSSIBLE CAUSE(S) SOLUTION All Interfaces No LEDs, beep or motor spin. No power is being supplied to the scanner. Check transforme ...

  • Honeywell Solaris 7820 - page 46

    42 T ROUBLESHOOTING G UIDE SYMPTOMS POSSIBLE CAUSE(S) SOLUTION The unit powers up, but does not scan and/or beep. Scanning a particular symbology that is not enabled. UPC/EAN, Code 39, Interleaved 2 of 5, Code 93, Code 128 and Codabar are enabled by default. Verify that the type of bar code being read has been selected. The scanner has been configu ...

  • Honeywell Solaris 7820 - page 47

    43 T ROUBLESHOOTING G UIDE SYMPTOMS POSSIBLE CAUSE(S) SOLUTION Scanner beeps at some bar codes and NOT for others of the same bar code symbology. The bar code may have been printed incorrectly. Check if it is a check digit/character/or border problem. The scanner is not configured correctly for this type of bar code. Check if check digits are set p ...

  • Honeywell Solaris 7820 - page 48

    44 T ROUBLESHOOTING G UIDE SYMPTOMS POSSIBLE CAUSE(S) SOLUTION Everything works except for a couple of characters. These characters may not be supported by that country’s key look up table. Try operating the scanner in Alt mode. RS232 Only The unit is not transmitting each character. Configuration is not correct. Increase the intercharacter delay ...

  • Honeywell Solaris 7820 - page 49

    45 T ROUBLESHOOTING G UIDE SYMPTOMS POSSIBLE CAUSE(S) SOLUTION Aux Port Operation with any Interface Trouble with the secondary scanner. Refer to the user guide provided with the secondary scanner. Secondary scanner powers up but data is not relayed to the host. Cable [PN 57-57170 x -3] may not be connected to the proper port. Ensure the secondary ...

  • Honeywell Solaris 7820 - page 50

    46 C ONFIGURATION M ODES The 7820 has three modes of configuration. • Bar Codes Configure the 7820 by scanning the bar codes included in the MetroSelect Configuration Guide shipped with the area imager. This manual is available for downloaded at www. honeywellaidc.com . • MetroSet 2 This user-friendly Windows-based confi guration program allow ...

  • Honeywell Solaris 7820 - page 51

    47 U PGRADING THE F IRMWARE The 7820 is part of Honeywell's line of scanners with flash upgradeable firmw are. The upgrade process requires, a new firmw are file supplied to the customer by a customer service representative  and Honeyw ell's MetroSet 2 software  . A personal computer running Microsoft ® Windows ® 95 or greater ...

  • Honeywell Solaris 7820 - page 52

    48 S CANNER AND C ABLE T ERMINATIONS S CANNER P INOUT C ONNECTIONS The 7820 scanner interfaces terminate to 10-pin modular jacks located on the back of the unit. Figure 43. Scanner Interface Ports 7820 EAS Connector 7820 Auxiliary Connector Pin Function Pin Function 1 GROUND 1 GROUND 2 ANTENNA + 2 AUX_RxD 3 ANTENNA - 3 AUX_TxD 4 EAS GPIO OUT 4 AUX_ ...

  • Honeywell Solaris 7820 - page 53

    49 S CANNER AND C ABLE T ERMINATIONS S CANNER P INOUT C ONNECTIONS Figure 44. Scanner Interface Ports HOST CONNECTOR (Multi-Interface) Pin Function Pin Function RS232 Keyboard Wedge 1 Ground 1 Ground 2 CTS / DTR 2 Tied to Pin 3 in Cable 3 Data Rx 3 Tied to Pin 2 in Cable 4 N/C 4 PC Data 5 N/C 5 PC Clock 6 RTS * 6 KB Clock 7 N/C 7 +5VDC PC Keyboard ...

  • Honeywell Solaris 7820 - page 54

    50 S CANNER AND C ABLE T ERMINATIONS C ABL E C ONNECTOR C ONFIGURATIONS (H OST E ND ) VLink Cable, PN 5S-5S xxx -3* Pin Function 1 Shield Ground 2 RS232 T ransmit Output 3 RS232 Receive Input 4 N/C 5 Power/Signal Ground 6 Reserved 7 CT S Input † 8 RT S Output 9 +5VDC xxx* specifies connection to the hos t † CTS Input can also serve as DTR input ...

  • Honeywell Solaris 7820 - page 55

    51 S CANNER AND C ABLE T ERMINATIONS C ABLE C ONNECTOR C ONFIGURATIONS (H OST E ND ) VLink, Keyboard Wedge PN 54-54002 Pin Function 5-Pin DIN, Female 1 Keyboard Clock 2 Keyboard Data 3 No Connect 4 Power Ground 5 +5 Volts DC Pin Function 6-Pin DIN, Male 1 Keyboard Data 2 No Connect 3 Power Ground 4 +5 Volts DC 5 PC Clock 6 No Connect Honeyw ell wil ...

  • Honeywell Solaris 7820 - page 56

    52 R EGULATORY C OMPLIANCE S AFETY ITE Equipment IEC 60950-1: Second Edition EN 60950-1: Second Edition Laser Laser Class 1: IEC 60825-1: Second Edition, 2007 EN 60825-1: Second Edition, 2007 LED IEC 62471: Exempt Risk Group Caution Use of controls or adjustments or performanc e of procedures other than those specified herein may result in hazardou ...

  • Honeywell Solaris 7820 - page 57

    53 R EGULATORY C OMPLIANCE A ttenzione L’utilizzo di sistemi di controllo, di r egolazioni o di procedimenti diversi da quelli descritti nel presente Manuale può provocare delle esposizioni a raggi laser rischiose. Il cliente non deve assolutamente tentare di riparare egli stesso lo scanner laser. Non guardate mai il raggio laser, anche se cr ed ...

  • Honeywell Solaris 7820 - page 58

    54 R EGULATORY C OMPLIANCE EMC A ttenzione Questo e’ un prodotto di classe A. Se usato in vi cinanza di residenze private potrebbe causare interferenze radio che potrebbero richiedere all’utilizzatore opportune misure. A ttention Ce produit est de classe “A”. Dans un environnement domestique, ce produit peut être la cause d’interférence ...

  • Honeywell Solaris 7820 - page 59

    55 C USTOMER S UPPORT Technical Assistance If you need assistance installing or troubleshooting your device, please contact us by using one of the methods below : Know ledge Base: www. h sm k no wl edgebase.com Our Knowledge Base provides thousands of immediate solutions. If the Knowledge Base cannot help, our Technical Support Portal (see below ) ...

  • Honeywell Solaris 7820 - page 60

    56 L IMITED W ARRANTY Honeywell International Inc. ("HII") warrants its products and optional accessories to be free from defects in materials and workmanship and to conform to HII’s published specifications applicable to the products purchas ed at the time of shipment. This warranty does not cover any HII product which is (i) improperl ...

  • Honeywell Solaris 7820 - page 61

    57 I NDEX A AC ........................................................ 8 accessories ...................................... 3, 4 adapter ............................................... 51 audible ............................... See indicator auxiliary .............................. 3, 45, 49, 50 scanner .............................. 17, 18, 19 au ...

  • Honeywell Solaris 7820 - page 62

    58 I NDEX laser power ........................................... 7 led ..................................... See indicator limited warranty .................................. 56 M maintenance ....................................... 39 manual ................................................. 3 MetroSelect ........................................ 46 ...

  • Honeywell Solaris 7820 - page 63

    ...

  • Honeywell Solaris 7820 - page 64

    Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www. honeywellaidc.com 00-02283 Rev G 4/13 ...

Manufacturer Honeywell Category Barcode readers

Documents that we receive from a manufacturer of a Honeywell Solaris 7820 can be divided into several groups. They are, among others:
- Honeywell technical drawings
- Solaris 7820 manuals
- Honeywell product data sheets
- information booklets
- or energy labels Honeywell Solaris 7820
All of them are important, but the most important information from the point of view of use of the device are in the user manual Honeywell Solaris 7820.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Honeywell Solaris 7820, service manual, brief instructions and user manuals Honeywell Solaris 7820. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Honeywell Solaris 7820.

Similar manuals

A complete manual for the device Honeywell Solaris 7820, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Honeywell Solaris 7820 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Honeywell Solaris 7820.

A complete Honeywell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Honeywell Solaris 7820 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Honeywell Solaris 7820, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Honeywell Solaris 7820, that we can find in the current document
3. Tips how to use the basic functions of the device Honeywell Solaris 7820 - which should help us in our first steps of using Honeywell Solaris 7820
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Honeywell Solaris 7820
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Honeywell Solaris 7820 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Honeywell Solaris 7820?

Use the form below

If you did not solve your problem by using a manual Honeywell Solaris 7820, ask a question using the form below. If a user had a similar problem with Honeywell Solaris 7820 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)