English dropdown-ico

Manual Wyse Technology 883886-01

56 pages 2.59 mb
Download

Go to site of 56

Summary
  • Wyse Technology 883886-01 - page 1

    Inst allation Guide Wyse Device Manager™ Release 4.9.1 Issue: 042012 PN: 883886-01 Rev . N ...

  • Wyse Technology 883886-01 - page 2

    Copyright Notices © 2012, Wyse T echnology Inc. All rights reserved. This manual and the software and firmware described in it are copyrighted. Y ou may not reproduce, transmit, transcribe, store in a retrieval system, or translate into any language or compute r language, in any form or by any means, electronic, mechanical, magnet ic, optica l, ch ...

  • Wyse Technology 883886-01 - page 3

    Content s 1 Introduction 1 About this Guide 2 Finding the Information Y ou Need in th is Guide 2 Wyse T echnical Support 2 Related Document ation and Services 2 Wyse Online Community 2 2 Prep aring for Installation 3 Pre-Installation Checklist 3 Hardware Requirements 6 Software Requirement s 6 Communication Por t Requirement s 7 Upgrading Req ui re ...

  • Wyse Technology 883886-01 - page 4

    iv Contents This page intentionally blank. ...

  • Wyse Technology 883886-01 - page 5

    1 Introduction Wyse Device Manager TM (WDM) software is the premi er enterprise solution for managing network intelligent devices simply , remotely , and secu rely . It enables IT professionals to easily organize, upgrade, co ntrol, and sup port thousands of devices running Micr osoft Windows XP Embedded, Microsof t Windows CE, Wyse Enhanced Micros ...

  • Wyse Technology 883886-01 - page 6

    2 Chapter 1 About this Guide This guide pr ovides the step -by-step instru cti ons you need to inst all and configur e a WDM environment. It also includes the requ irements you must address before you beg in the installation procedures. This guide is intended for experie nced network administrators and Inform ation T echnology professionals who hav ...

  • Wyse Technology 883886-01 - page 7

    2 Prep aring for Inst allation This chapter contain s the pre-installa tion requ irements you must co mplete to pr epare the environment for WDM inst a llation and configuration. After you have co mple ted all pre-install ation requirements, you can continue with the inst allation/upgrade you want ("Installing or Upgrading WD M Workgroup Editi ...

  • Wyse Technology 883886-01 - page 8

    4 Chapter 2 • WDM Workgroup Edition Only : · Y ou do not need to obtain special lic enses to inst all WDM (you will use the WDM Workgroup Sale s Key that appears by default in the InstallShield Wizar d ). · Ensure your F TP service is running (see al so "How the WDM Installer Inst alls and Configures FTP") . Not e th at yo u ca n i gn ...

  • Wyse Technology 883886-01 - page 9

    Preparing for Installation 5 • Upgrading Curre n t W DM Installations Only: · Planning for Upgrading - WDM 4.9.1 support s an upgrade from WDM version 4.9.0 ONL Y . Y ou cannot upgr ade from any other version. IMPORT ANT : Af ter upgrading to WDM 4.9.1, you must upgrade all devices with the latest HAgent p ackages available to ensure your de vic ...

  • Wyse Technology 883886-01 - page 10

    6 Chapter 2 Hardware Requirement s Depending on your operating system, be sure the machine( s) to which you will install WDM meets or exce eds the minimum system requirements shown in T able 1 for 32-bit operating systems or in T able 2 for 64-bit operating systems (a s these are general guidelines, be sure to refer to your oper ating system docume ...

  • Wyse Technology 883886-01 - page 11

    Preparing for Installation 7 Communication Port Requirement s T o perform their full range of management functions, WDM sof tware components require certain por ts to remain open on your servers, routers, an d switches. For example, WDM relies on the HTTP/HTTPS commu nications port designated by your Web service (such as Microsoft Internet Info rma ...

  • Wyse Technology 883886-01 - page 12

    8 Chapter 2 Upgrading Requirement s WDM 4.9.1 support s an upgrade from WDM version 4.9.0 ONL Y . Y ou cannot up grade from any other version. IMPORT ANT : Af ter upgrading to WDM 4.9.1, you must upgrade all devices with the latest HAgent p ackages available to ensure your devices can be manage d using WDM. Be sure to c onsult the la test WDM Relea ...

  • Wyse Technology 883886-01 - page 13

    Preparing for Installation 9 Requirement s for Managing PCoIP Devices PCoIP devices (running ThreadX firmware) requir e a DNS Service Location (SRV ) resource record to perform the followin g actions: • Partial Check-In (heartbeat ) - Where the device performs a heartbeat check-in every 5 minutes (this amount of time is not configurable). • Fir ...

  • Wyse Technology 883886-01 - page 14

    10 Chapter 2 Figure 2 Service Location (SR V) 3. Select the Service Location (SR V ) resource reco rd type and th en click Create Record to open the New Resource Record dialog bo x. Figure 3 New Resource Record 4. Use the following guidelines ( Domain is automatically sh own) : • Enter _Pcoip- tool in the Se rvice box. • Enter _tcp in the Proto ...

  • Wyse Technology 883886-01 - page 15

    3 Inst alling or Upgrading WDM W orkgroup Edition This section provides the deta iled procedures yo u must complete to install or upgr ade WDM Workgroup Edition . Caution Be sure you ha ve completed all p re-inst allation requiremen ts as describe d in "Preparing for Inst allation" before you begin installing or upgrading WDM Workgroup Ed ...

  • Wyse Technology 883886-01 - page 16

    12 Chapter 3 Inst alling or Upgrading Procedures (WDM Workgroup Edition) The WDM Workgroup Edition installation wizard automati cally detect s whether a new insta llation or an upgrade in sta llation is ne ede d, and guides you thro ugh the process. Use the following guidelines: 1. Download and extract the WDM Workgr oup Edition files to a folder o ...

  • Wyse Technology 883886-01 - page 17

    Installing or Up grading WDM Workgroup Edition 13 • Be Sure to Carefully Follow the WDM Prerequisi te Utility - It finds out what you have and what you need , and then guides you throug h all the steps needed for your environment. • If Y ou are Upgrading - Be sure to use th e correc t system administrator password ( SA Password ) for the curren ...

  • Wyse Technology 883886-01 - page 18

    14 Chapter 3 This page intentionally blank. ...

  • Wyse Technology 883886-01 - page 19

    4 Inst alling or Upgrading WDM Enterprise Edition This section provides the deta iled procedures yo u must complete to install or upgr ade WDM Enterprise Edition . Caution Be sure you ha ve completed all p re-inst allation requiremen ts as describe d in "Preparing for Inst allation" before you begin installing or upgrading WDM Enterprise ...

  • Wyse Technology 883886-01 - page 20

    16 Chapter 4 About Evaluation Licensing If you are installing WDM Enterprise Edition for evalua tio n, yo u mu st use an Enterprise Evaluation License Key to install and use WDM for 30 days. T o co ntinue using WDM beyond 30 days without inter ruption, be sure to purchase and activate a WDM Ente rprise Sales Key (as described in Ad ministrators Gui ...

  • Wyse Technology 883886-01 - page 21

    Installing or Up grading WDM Ente rprise Edition 17 Use the following guidelines: Tip Use the Correct Key - For all WDM Enterprise Edition installations or upgrades ( Ty p i c a l or Custom ) be sure to use th e cor re ct WDM Enterprise Sales Key or Enterprise Evaluati on Licen se Key provided to you by Wyse (after purchase, you should have receive ...

  • Wyse Technology 883886-01 - page 22

    18 Chapter 4 • If Y ou are Upgrading - Be sure to use th e correc t system administrator password ( SA Password ) for the current inst allations of your WDM Enterprise Edition . • For Ty p i c al Inst allations and Upgrade s, Use Defaults - It is recommended to use the InstallShield Wizard recommendations. IMPORT ANT : T ypical insta llations a ...

  • Wyse Technology 883886-01 - page 23

    Installing or Up grading WDM Ente rprise Edition 19 Det ailed Custom Installation and Upgrade Instructions Whether you ar e pe rf or min g a Custom installation or upgrade on a single server o r multiple servers, yo u must inst all or upgrade the WDM componen t s in the following order: 1. WDM Database ( Da t abase ) - There can be only one inst an ...

  • Wyse Technology 883886-01 - page 24

    20 Chapter 4 WDM Dat a base Installation T ips Y ou Need to Know Depending on how you are installing, use the follo wing guidelines when pr ompted for Database configuration s during an insta llation or upgrade: • If you are inst alling a new WDM Database on a ser ver - be sure t o select the The Wyse Device Manager d a tabase has not been instal ...

  • Wyse Technology 883886-01 - page 25

    Installing or Up grading WDM Ente rprise Edition 21 Figure 8 SQL Server Properties • If you have already in st alled the WDM Database on a separat e server and you are currently inst alling other WDM component s on a server - the InstallShield Wizar d will prompt you for a WDM Database confirmation. Be sure to select the co rrect server name, ent ...

  • Wyse Technology 883886-01 - page 26

    22 Chapter 4 Sof tware Repository Installation T ips Y ou Need to Know Depending on how you are installing, use the follo wing guidelines when pr ompted for Repository configurations during an installation or upgr ade: Tip If your network has multiple sub nets, consider deploying a copy of the WDM Sof tware Repository ( Repository ) on each subnet ...

  • Wyse Technology 883886-01 - page 27

    Installing or Up grading WDM Ente rprise Edition 23 · Windows Authentication - This is the most secure fo rm of authentication in IIS. When you log in, Windows NT validates yo ur login and on ly your user name is transmitted over the network . Y our password is not transmitte d. · Basic Authentication - Th is authentication mode requ ires you to ...

  • Wyse Technology 883886-01 - page 28

    24 Chapter 4 Administrator Console Installa tion T ips Y ou Need to Know If you are installing mult iple instances of the Administrator Console ( MM C Snap-in ) in your WDM en vironment and want to use other administrators for ad di tional Administrator Console installa tions, you must do the following (in the order pr esented): Caution These instr ...

  • Wyse Technology 883886-01 - page 29

    A Activating Y our Sales Key This appendix includes the det ailed steps you must complete to activate your Sales Key (WDM Workgroup Sales Key or WDM Enterp ris e Sales Key ). Tip A WDM Enterprise Evaluation License Key cannot be activated. Caution Be sure to perform the act ivation (ente r an Activation Code ) on the server to which you installed t ...

  • Wyse Technology 883886-01 - page 30

    26 Appendix A Figure 14 Licensing Wizard 4. Note your Sales Key and Non-activa te d Key numbers as you will use them in the online WDM licensing form. Tip If the server on which you inst alled the Administrator Console ( MMC Snap-in ) has internet access, you can copy-and-p aste the Sales Key and Non-activated Key numbers from the Key Information a ...

  • Wyse Technology 883886-01 - page 31

    B Uninst alling WDM When using a Microsoft Window s re move program feature (such as Add and Remove Programs or Programs a nd Features ) to remove WDM, the da tabase server will require login credentials to complete the uninst allation of WDM. Figure 16 Dat abase Server Login Credentials Depending on your WDM inst allation, do one of the following: ...

  • Wyse Technology 883886-01 - page 32

    28 Appendix B Figure 17 Microsof t data execut io n prevention message - exa mple Figure 18 IIS error message - example Open the IIS W eb Sites Properties dialog box (according to the IIS docu ment ation for your server version). Figure 19 Remove the Rapport Filter entry fro m IIS - example On the ISAPI Filters tab, select RapportFilter from the li ...

  • Wyse Technology 883886-01 - page 33

    C Reference and T roubleshooting: FTP , IIS, and Firewall Information Although WDM automatically in stalls and configures everythin g you need for WDM use with respect to FTP , IIS, and the Windows Fi rewall, the following refe rence information ca n be useful for unde rstanding your environment and for various troubleshooting purposes. Information ...

  • Wyse Technology 883886-01 - page 34

    30 Appendix C How the WDM Inst aller Inst alls and Configures FTP Depending on your server version, use one of the following sections to underst and how FTP is installed and configured for use wit h WDM (information is pres en te d as if you would complete the pr ocedures manually): • "Installing and Configuring FTP on Windows Server 2008&qu ...

  • Wyse Technology 883886-01 - page 35

    Reference an d T roub les hooting: FTP, IIS, an d Firew all Information 31 Figure 21 Select Role Services 4. Under Role Services , expan d FTP Publishing Service , select the FT P Server and FTP Management Co nsole check boxes, and then click Next to open the Confirm Inst allation Selections window . 5. After confirming, click Inst all . 6. After i ...

  • Wyse Technology 883886-01 - page 36

    32 Appendix C Figure 23 Default FTP Site 5. In the tree pane, right-click on Default FTP Site , and then select Prope rties to open the Properties dialog box. Figure 24 Properties 6. Click the Security Account s tab and be sure that the Allow Anonymous Connections check box is selected . Figure 25 Home Directory t ab ...

  • Wyse Technology 883886-01 - page 37

    Reference an d T roub les hooting: FTP, IIS, an d Firew all Information 33 7. Click the Home Directory tab and be sure that th e Read , Writ e and Log visits check boxes are selected. 8. Click Apply , and th en click OK . 9. Close the Internet Information Se rvices (IIS) Manager window . 10. The FTP server is now configured to accept inco ming FTP ...

  • Wyse Technology 883886-01 - page 38

    34 Appendix C Inst alling and Configuri ng FTP on Windows Server 2008 R2 Before setting up your own FTP server in Wi ndows, you must be sure that Internet Information Services (IIS) has already been inst alled on the server . 1. On the taskbar , click St art > Administrative T ools > Server Manager to open the Server Manag er window . 2. In t ...

  • Wyse Technology 883886-01 - page 39

    Reference an d T roub les hooting: FTP, IIS, an d Firew all Information 35 Use the following guidelines to configure FTP on Windows Server 2008 R2: 1. On the taskbar , click St art > Administrative T ools > In ternet Informati on Serv ic es (IIS) Manager to open the Internet Information Se rvices (IIS) Manager window . Figure 28 Internet Info ...

  • Wyse Technology 883886-01 - page 40

    36 Appendix C Figure 30 Binding and SSL Settings 4. Keep the default value for IP Address as All una ssigned and port as 21 . 5. Select the St art FTP site automa tically check box, change the SSL op tion to No SSL , and then click Next . Figure 31 Authenticatio n and Authorization Information 6. Select the Anonymous and Basic Authentication check ...

  • Wyse Technology 883886-01 - page 41

    Reference an d T roub les hooting: FTP, IIS, an d Firew all Information 37 Inst alling and Confi guring FTP on Windows 7 Before setting up your own FTP server in Wi ndows, you must be sure that Internet Information Services (IIS) has already been inst alled on the server . 1. On the taskbar , click Start > C on tr o l P a n el to open Control Pa ...

  • Wyse Technology 883886-01 - page 42

    38 Appendix C Figure 33 Internet Infor mation Services (IIS) Manager 2. In the tree pane, right-click on Sites , and then select Add FTP Site to begin cre ating an FTP site. Figure 34 Add FTP Site 3. Enter the FTP site name , select th e Physic al path for the FTP root directory , and then click Next . ...

  • Wyse Technology 883886-01 - page 43

    Reference an d T roub les hooting: FTP, IIS, an d Firew all Information 39 Figure 35 Binding and SSL Settings 4. Keep the default value for IP Address as All una ssigned and port as 21 . 5. Select the St art FTP site automa tically check box, change the SSL op tion to No SSL , and then click Next . Figure 36 Authenticatio n and Authorization Inform ...

  • Wyse Technology 883886-01 - page 44

    40 Appendix C How the WDM Inst aller Inst alls and Configures IIS Depending on your operating system , use one of the following sections to unde rstand how IIS is inst alled and configured fo r use with WD M (information is presented as if you would complete the procedures manually): • "Installing IIS 7.0 on Windows Server 2008" • &qu ...

  • Wyse Technology 883886-01 - page 45

    Reference an d T roub les hooting: FTP, IIS, an d Firew all Information 41 5. Under Roles Services , expand W eb Server , exp and Common HTTP F eatures , and then select the HTTP Redirection check box. 6. Under Web Server , ex pand Application Development and then s elect the ISAPI Extensions check box. 7. Under We b Server , expand Security , sele ...

  • Wyse Technology 883886-01 - page 46

    42 Appendix C Inst alling WebDA V Extension for IIS 7.0 1. Download the 32-bit Installa tion Package of the WebDA V Extension for IIS 7.0 from: http://blogs.iis.net/r obert_mc murray/archive/2008/03/12/ webdav-extension-for-windows-s erver-2008-r t m-is-released.aspx 2. After downloadin g, double-click webdav_x86_rtw .msi to open and use the Micros ...

  • Wyse Technology 883886-01 - page 47

    Reference an d T roub les hooting: FTP, IIS, an d Firew all Information 43 Inst alling IIS 7.5 on Windows Server 2008 R2 By default, I IS 7.5 is no t installed on Window s Server 2008 R2. Y ou can install IIS by us ing the Add Roles wizard in Server Manager . 1. On the taskbar , click St art > Administrative T ools > Server Manager to open th ...

  • Wyse Technology 883886-01 - page 48

    44 Appendix C Figure 42 Select Role Services continued 8. Under Role Services , expan d Performance , and then be sure that each option is cleared ( S tatic Content Compression and Dynamic Content Compression should be cleared). 9. Under Role Services , expan d Management T ools , and then select the IIS Management Console a nd IIS Management Scrip ...

  • Wyse Technology 883886-01 - page 49

    Reference an d T roub les hooting: FTP, IIS, an d Firew all Information 45 Figure 43 DefaultAppPool - Advanced Set tings c. Right-click the DefaultAppPool and select Advanced Sett ings to open th e Advanced Settings window . Figure 44 Advanced Sett ings d. In the General section, ensure that Enable 32-Bit Applications is set to Tr u e . e. In the P ...

  • Wyse Technology 883886-01 - page 50

    46 Appendix C Inst alling IIS 7.5 on Windows 7 By default, IIS 7.5 is not installed on Wi ndows 7. Y ou can install IIS by using the Tu r n Windows Feat ures on or off wizard in Prog rams and F eatures . 1. On the taskbar , click Start > C on tr o l P a n el to open Control Panel . 2. Click Programs > Programs and Features , a nd then on the ...

  • Wyse Technology 883886-01 - page 51

    Reference an d T roub les hooting: FTP, IIS, an d Firew all Information 47 Figure 46 Internet Infor mation Services exp anded 5. Expand W eb Management T ools , and then select the IIS 6 Management Comp atibility , IIS Managemen t Console , and IIS Management Script s and T ools check boxes. 6. Expand W orld Wide W eb Services , expand Application ...

  • Wyse Technology 883886-01 - page 52

    48 Appendix C Figure 47 Request Filtering 9. Under World Wide Web Services, expand Security , select the Basic Authent ication and Windo ws Authentication check boxes, and then be sure that the Request Filtering option is cleared. 10. Click OK to install IIS. 11 . Continue with "Installing or Upgrad ing WDM Enterprise Edition." ...

  • Wyse Technology 883886-01 - page 53

    Reference an d T roub les hooting: FTP, IIS, an d Firew all Information 49 Using Windows Firewall wi th WDM If you are using Wind ows Firewall with your WDM Workgroup Edition or your WDM Enterprise Edition , the WDM installer logs on a s an administrator and adds the WDM DHCP Proxy , WDM TFTP , Inetinfo , and Rptservicelogs program s to th e Progra ...

  • Wyse Technology 883886-01 - page 54

    50 Appendix C This page intentionally blank. ...

  • Wyse Technology 883886-01 - page 55

    51 Ta b l e s 1 Server Hard ware Requirem ents for 32-bit O S 6 2 Server Hard ware Requirem ents for 64-bit O S 6 3 Server Sof tware Requirements 6 4 Communication Port s 7 ...

  • Wyse Technology 883886-01 - page 56

    Inst allation Guide Wyse De vice Manager TM Release 4.9.1 Issue: 0420 1 2 Written and publishe d by: Wyse T echnology Inc. , April 2012 Created using Fra m eM a ke r ® and Acrobat ® ...

Manufacturer Wyse Technology Category Personal Computer

Documents that we receive from a manufacturer of a Wyse Technology 883886-01 can be divided into several groups. They are, among others:
- Wyse Technology technical drawings
- 883886-01 manuals
- Wyse Technology product data sheets
- information booklets
- or energy labels Wyse Technology 883886-01
All of them are important, but the most important information from the point of view of use of the device are in the user manual Wyse Technology 883886-01.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Wyse Technology 883886-01, service manual, brief instructions and user manuals Wyse Technology 883886-01. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Wyse Technology 883886-01.

Similar manuals

A complete manual for the device Wyse Technology 883886-01, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Wyse Technology 883886-01 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Wyse Technology 883886-01.

A complete Wyse Technology manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Wyse Technology 883886-01 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Wyse Technology 883886-01, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Wyse Technology 883886-01, that we can find in the current document
3. Tips how to use the basic functions of the device Wyse Technology 883886-01 - which should help us in our first steps of using Wyse Technology 883886-01
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Wyse Technology 883886-01
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Wyse Technology 883886-01 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Wyse Technology 883886-01?

Use the form below

If you did not solve your problem by using a manual Wyse Technology 883886-01, ask a question using the form below. If a user had a similar problem with Wyse Technology 883886-01 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)