English dropdown-ico

Manual SMC Networks SMC9452TX-1

36 pages 0.68 mb
Download

Go to site of 36

Summary
  • SMC Networks SMC9452TX-1 - page 1

    ...

  • SMC Networks SMC9452TX-1 - page 2

    1 Copyrights Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of pate nts or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of ...

  • SMC Networks SMC9452TX-1 - page 3

    2 Contents Warranty ……………………………………………… …….…..………..…...... 3 Compliances ……… ……………………..……………………………………. 5 Hardware Description ............................................... ..................... ............….. 7 Package Contents …… ………? ...

  • SMC Networks SMC9452TX-1 - page 4

    3 Limited Warranty Limited Warranty Statem ent: SMC Networ ks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under norm al use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, ...

  • SMC Networks SMC9452TX-1 - page 5

    4 Limited Warranty WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WAR R ANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOI NG WARRANTIES AND REMEDIES AR E EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARR ANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR B ...

  • SMC Networks SMC9452TX-1 - page 6

    5 Compliances FCC - Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm ful interference in a residential installation. This equipment generates, uses , and can radiate radio frequency en ...

  • SMC Networks SMC9452TX-1 - page 7

    6 • Immunity to conducted disturbances, Indu ced by radio-frequency fields: EN61000-4-6:1996 (0.15 - 80 MHz with 1 kHz AM 80% Modulation: 3 V/m) • Power frequency magnetic field immunity test according to EN 61000-4-8:1993 (1 A/m at frequency 50 Hz) • Voltage dips, short interruptions and voltage variations immu nity test according to EN61000 ...

  • SMC Networks SMC9452TX-1 - page 8

    7 Hardware Description SMC’s EZ Card 1000, SMC9452TX-1, is a Gigabit Ethernet network interface card for 32-bit PCI local bus- compliant computers. It operates under the 1000BASE-T specification over Category 5 UTP Cable, as well as being compatible with 100BASE-TX and 10BASE-T connections. This networ k card provides up to ten times the bandwidt ...

  • SMC Networks SMC9452TX-1 - page 9

    8 System Requirements Before you install the EZ Card 1000, check your system for the following requirem ents: • A PC and BIOS that support the PC I Local Bus Specification v2.0 or later • An available 32-bit PCI slot • Category 5 or 5e UTP cable with RJ-45 connectors • An IEEE 802.3ab-compliant Gigabit Ethern et device installed in your net ...

  • SMC Networks SMC9452TX-1 - page 10

    9 PCI Configuration In most cases, your network card is autom atically c onfigured when you power-up your computer. In certain computers, however, you must m odify PCI settings by r unning your com puter’s BIOS Setup program. For more information, refer to “PCI Com pa tibility” section of this manual. Connecting Category 5 Cable To connect to ...

  • SMC Networks SMC9452TX-1 - page 11

    10 Driver Installation Windows 95/98 NOTE: Installation processes will require the us e of your original, li censed copy of Windows. Please have your Windows CD available BE FORE proceeding with the installation. Step 1: After you have inserted th e EZ Card 10/100/1000 SMC9452TX-1 PC I Card in your m achine, the Operating System will automa tically ...

  • SMC Networks SMC9452TX-1 - page 12

    11 Step 3: Clear all checkboxes except for [Specify a lo cation:]. Then press the [Browse] button and look for the drivers on your CD-R OM. If using Windows 95, brow se to ?:SMC9452W IN95 and if you are using Windows 98, browse to ?:SMC9452WIN98. (Note: The "?" equals the letter of your CD-ROM drive. In most cases, this is D .) Step 4 ...

  • SMC Networks SMC9452TX-1 - page 13

    12 Step 5: Once the system has copied the SMC drivers from the CD, it may then requ est files from your original Windows disk. Please inse rt the Windows CD at this time. Step 6: The system will copy the file s. Do NOT press [Cancel]. ...

  • SMC Networks SMC9452TX-1 - page 14

    13 Step 7: Once all the necessary files are copied from the W indows CD, the driver install process will be complete. Click [Finish] to exit the wizard. Step 8: You will then be prompted to reboot the m achine. Press [Yes]. Upon reboot, the EZ Card 10/100/1000 SMC9452TX-1 PCI Card will be initialized and ready for use. ...

  • SMC Networks SMC9452TX-1 - page 15

    14 Windows Me NOTE: Installation processes will require the us e of your original, li censed copy of Windows. Please have your Windows CD available BE FORE proceeding with the installation. Step 1: After you have inserted the SMC9452TX-1 PCI Ca rd in your machine and turned it back on, the OS will automatically recognize the adap ter and prompt you ...

  • SMC Networks SMC9452TX-1 - page 16

    15 Step 3: The system should find the drivers. Click the [N ext >] button to continue the installation. (Note: If the system could not find the drivers, click the [< Back] button, and select the [Display a list of all the drivers] option. Sele ct [Network Adapters] from the list of devices, press [Have Disk] and once again browse to th e loca ...

  • SMC Networks SMC9452TX-1 - page 17

    16 Windows NT Step 1: NT is not a Plug-and-Play Operating System, t hus you need to manually install the driv ers. Right-click on the [Network] icon on th e desktop and click [Properties]. Step 2: Go to the [Adapters] tab and click the [Add] button. Step 3: Click the [Have Disk] button and enter th e location of the drivers. This should be ?:SMC94 ...

  • SMC Networks SMC9452TX-1 - page 18

    17 Windows 2000 Step 1: After you have inserted the SMC9452TX-1 PCI Ca rd in your machine and turned it back on, the Operating System will automa tically recognize the adapter and prompt you for the appropriate drivers. Click the [N ext >] button to begin the installation. Step 2: Insert the Driver CD and select the [S earch for a suitable drive ...

  • SMC Networks SMC9452TX-1 - page 19

    18 Windows XP Step 1: After you have inserted the SMC9452TX-1 PCI Ca rd in your machine and turned it back on, the Operating System will automati cally recognize and install the adap ter using the drivers built-into Windows XP. If you wish to upgrade to the latest drivers available on the CD -ROM, please continue and read the directions below. Step ...

  • SMC Networks SMC9452TX-1 - page 20

    19 ...

  • SMC Networks SMC9452TX-1 - page 21

    20 Step 3: Go to the [Driver] tab and click [Up date Driver]. Select the [Install from a list...] option and click [N ext >]. Select the [Don't Search] option and click [N ext >]. ...

  • SMC Networks SMC9452TX-1 - page 22

    21 ...

  • SMC Networks SMC9452TX-1 - page 23

    22 Click [Have Disk] and browse to the loca tion of the drivers on the CD. This should be ?:SMC9452WINXP. (Note: The ? equals the letter of your CD-ROM drive. In most cases, this is D.) Then click [OK]. ...

  • SMC Networks SMC9452TX-1 - page 24

    23 Step 4: The correct model of your SMC adap ter will now be displayed. Click [N ext >]. This process will be completed once the drivers a re copied to the hard drive and ins talled. Please click [ Finish] to exit the wizard. ...

  • SMC Networks SMC9452TX-1 - page 25

    24 Driver Verification Windows 95/98/Me Step 1: Right-click the My Computer ic on on your desktop and click [Pr operties]. Step 2: Then go to the [Device Manager] tab and ope n the [Network adapters] section. You should see your SMC EZ Card 1000 in this menu. Highlight it and click [Pr operties]. Step 3: The Device Status shows that the "This ...

  • SMC Networks SMC9452TX-1 - page 26

    25 Windows 2000 Step 1: Right-click the My Computer icon on your desktop and click [Properties]. Step 2: Then go to the Hardware tab and click [D evice Manager]. Open the [Network adapters] section. You should see your SMC EZ Card 1000 card in this menu. Right-click your adapter and click [Properties]. Step 3: The Device Status shows that the " ...

  • SMC Networks SMC9452TX-1 - page 27

    26 Step 2: Then go to the Hardware tab and click [Dev ice Manager]. Open the [Network adapters] section. You should see your SMC EZ Card 1000 card in this menu. Right-click the adapter and click [Properties]. Step 3: The Device Status shows that "This device is working properly". If there is any error messages displayed here, you will nee ...

  • SMC Networks SMC9452TX-1 - page 28

    27 TROUBLESHOOTING PCI Compatibility Early PCI BIOS versions do not properly support the PCI specification and may “ha ng” when a network card driver tries to load. If this occurs, make sure your BIOS correctly supports the PCI Local Bus Specification (v2.0 or later) and upgrade your computer BIOS to the latest version. Some PCI computers are n ...

  • SMC Networks SMC9452TX-1 - page 29

    28 Solutions for Common Problems Problems are often caused by cabling errors, conflicts with other devices installed in the sam e computer, or software that has been configured incorrectly. If you encounter a problem with the EZ Card 1000 network card, use the following checklists to identify and correct the problem. Network Card Installation Probl ...

  • SMC Networks SMC9452TX-1 - page 30

    29 Cable Specifications Cable Types and Specifications Cable Type Max. Length Connector 10BASE-T Cat. 3, 4, 5 100-ohm UTP100 m (328 ft) RJ-45 100BASE-TX Cat. 5 100-ohm UTP100 m (328 ft) RJ-45 1000BASE-T Cat. 5, 5e 100-ohm UTP100 m (328 ft) RJ-45 Twisted-Pair Cable and Pin Assignments Caution : DO NOT plug a phone jack connector into any RJ-45 port. ...

  • SMC Networks SMC9452TX-1 - page 31

    30 Caution : Each wire pair must be attached to th e RJ-45 connectors in a specific orientation. TECHNICAL SPECIFICATIONS Bus Interface IBM compatible PC with available PCI slot (PCI 2.1/2.2, 33 MHz, 32bit) Interrupt INTA Network Interface 1000BASE-T: UTP cable; Category 5, 5e or better 100BASE-TX: UTP cable; Category 5 10BASE-T: UTP cable; Categor ...

  • SMC Networks SMC9452TX-1 - page 32

    31 Temperature Operating 0 to 55 °C (32 to 131 °F) Storage -20 to 65 °C (-4 to 150 °F) Humidity 10% to 90% (non-condensing) Standards IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3x Full-Duplex flow control IEEE 802.1p Port Priority Compliances CE Mark Emissions FCC Class A VCCI Class B Industry Canada Class B EN5 ...

  • SMC Networks SMC9452TX-1 - page 33

    32 TERMINOLOGY 10BASE-T: IEEE 802.3 specifications for 10 Mbps Ethernet over two pairs of Category 3, 4, or 5 UTP cable. 100BASE-TX: IEEE 802.3u specification for 100 Mbps Fast Ethern et over two pairs of Category 5 UTP cable. 1000BASE-T: IEEE 802.3ab specification for Gigabit Ethernet over four pairs of Category 5 UTP cable. Adapter: A device used ...

  • SMC Networks SMC9452TX-1 - page 34

    33 Fast Ethernet: A 100 Mbps network communication system based on Ethernet and the CSMA/CD access method. Full Duplex: Transmission method that allows two network devices to transm it and receive concurrently, effectively doubling the bandwidth of that link. Gigabit Ethernet: A 1000 Mbps network communication system based on Ethernet and the CSMA/ ...

  • SMC Networks SMC9452TX-1 - page 35

    34 MDI / MDI-X: Medium Dependent Interface - Al so called an "uplink port," it is a port on a network hub or switch used to connect to other hubs or switches without re quiring a crossover cable . The MDI port does not cross Fast Ethernet—similar to the AUI interf ace for traditional Ethe rnet. Network Diameter: Wire distance between tw ...

  • SMC Networks SMC9452TX-1 - page 36

    F OR TE CHNIC AL SUPPORT , CALL: F rom U .S .A. and Canada (2 4 hour s a day , 7 da ys a w eek ) (800) SMC -4 - Y OU; Phn: (94 9) 67 9-8000; F ax: (94 9) 6 79- 1481 F rom E urope : C ontact det ails can be found on www .smc.c om INTERNET E -mail addres s: techsupport@smc. com Driver updat es: http:// www .smc.c om/index. cfm ?action=tech_support_dr ...

Manufacturer SMC Networks Category Network Card

Documents that we receive from a manufacturer of a SMC Networks SMC9452TX-1 can be divided into several groups. They are, among others:
- SMC Networks technical drawings
- SMC9452TX-1 manuals
- SMC Networks product data sheets
- information booklets
- or energy labels SMC Networks SMC9452TX-1
All of them are important, but the most important information from the point of view of use of the device are in the user manual SMC Networks SMC9452TX-1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SMC Networks SMC9452TX-1, service manual, brief instructions and user manuals SMC Networks SMC9452TX-1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SMC Networks SMC9452TX-1.

Similar manuals

A complete manual for the device SMC Networks SMC9452TX-1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SMC Networks SMC9452TX-1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SMC Networks SMC9452TX-1.

A complete SMC Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SMC Networks SMC9452TX-1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SMC Networks SMC9452TX-1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SMC Networks SMC9452TX-1, that we can find in the current document
3. Tips how to use the basic functions of the device SMC Networks SMC9452TX-1 - which should help us in our first steps of using SMC Networks SMC9452TX-1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SMC Networks SMC9452TX-1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SMC Networks SMC9452TX-1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SMC Networks SMC9452TX-1?

Use the form below

If you did not solve your problem by using a manual SMC Networks SMC9452TX-1, ask a question using the form below. If a user had a similar problem with SMC Networks SMC9452TX-1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)