English dropdown-ico

Manual Edirol FA-101

48 pages 3.42 mb
Download

Go to site of 48

Summary
  • Edirol FA-101 - page 1

    Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (p. 3–p. 5). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s ma ...

  • Edirol FA-101 - page 2

    2 IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. BLUE: BROWN: As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which i ...

  • Edirol FA-101 - page 3

    3 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. ................................................................................................ 002d • Do not open or perform any internal modifications on the unit or its AC adaptor. ....................................... ...

  • Edirol FA-101 - page 4

    4 012b • Immediately turn the power off, remove the AC adaptor from the outlet, and request servicing by your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page when: • The AC adaptor, the power-supply cord, or the plug has been damaged; or • If smoke or unusual odor occur ...

  • Edirol FA-101 - page 5

    5 IMPORTANT NOTES 291a In addition to the items listed under “USING THE UNIT SAFELY” on page 3, please read and observe the following: Power Supply 301 • Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, o ...

  • Edirol FA-101 - page 6

    6 Handling CD-ROMs 801 • Avoid touching or scratching the shiny underside (encoded surface) of the disc. Damaged or dirty CD-ROM discs may not be read properly. Keep your discs clean using a commercially available CD cleaner. Copyright 851 • Unauthorized recording, distribution, sale, lending, public performance, broadcasting, or the like, in w ...

  • Edirol FA-101 - page 7

    7 Contents Contents of the package ......................................................... 8 Front and rear panel ................................................................ 9 Front panel ............................................................................................................................ 9 Rear panel.................. ...

  • Edirol FA-101 - page 8

    8 Contents of the package ■ FA-101 fig.FA-101 ■ AC adaptor This is the dedicated AC adaptor for the FA-101. Use only the supplied AC adaptor. ■ FireWire (IEEE 1394) cables (one 6-pin ↔ 6-pin cable, one 6-pin ↔ 4-pin cable) Use one of these cables to connect the FA-101 to the IEEE 1394 connector (FireWire connector, iLink connector, DV con ...

  • Edirol FA-101 - page 9

    9 Front and rear panel fig.front fig.jack-type 1. Combo input jacks These are analog audio input jacks with mic preamps. They accommodate either XLR or phone plugs, allowing you to connect a variety of equipment. Either balanced or unbalanced signals may be connected. Phantom power (48 V) is provided for XLR type connections, allowing you to connec ...

  • Edirol FA-101 - page 10

    10 Front and rear panel fig.front 4. Input/output level indicators These LEDs light according to the level of the signals that are being input via the combo input jacks (1) and WAVE OUT 1/2 (in the case of WDM, OUTPUT 1 ➔ see p. 22). (see block diagram ➔ front cover) To adjust the input level, stop playback of the sound from your computer. 5. S ...

  • Edirol FA-101 - page 11

    11 Front and rear panel 9. Sample rate select switch This specifies the sampling frequency at which audio data will be recorded and played back. In order to get this setting to take effect, you must exit all of your software, then cycle the power to the FA-101 (switch it off, then back on again). * If you are using Macintosh and want to change the ...

  • Edirol FA-101 - page 12

    12 Front and rear panel fig.rear 17. Power switch Used to switch the power on (DC IN) or off (OFF), and for switching to bus power (BUS). fig.power-sw BUS Bus power can be used if the FA-101 is connected to your computer via a FireWire (IEEE 1394) cable. In this case, power is supplied from your computer via the FireWire (IEEE 1394) cable. If you w ...

  • Edirol FA-101 - page 13

    13 Front and rear panel 20. Grounding terminal Depending on the circumstances of a particular setup, you may experience a discomforting sensation, or perceive that the surface feels gritty to the touch when you touch this device, microphones connected to it, or the metal portions of other objects, such as guitars. This is due to an infinitesimal el ...

  • Edirol FA-101 - page 14

    14 Installing the driver (Macintosh) 1 With the FA-101 disconnected, start up your Macintosh. 2 Use a FireWire (IEEE 1394) cable to connect the FA-101 to your Macintosh. 1. With the FA-101’s power switch off, connect the power cord to it. 2. Plug the AC adaptor cable into an AC outlet. 3. Use a FireWire (IEEE 1394) cable to connect the FA-101 to ...

  • Edirol FA-101 - page 15

    15 Installing the driver (Macintosh) * Depending on the model of Macintosh you are using, starting up the Macintosh when the FA-101 is connected may cause operation to become unstable. In this case, start up the Macintosh and then connect the FA-101. * If you want to change the FA-101’s sample rate, turn the FA-101 off, change the sample rate, an ...

  • Edirol FA-101 - page 16

    16 Installing the driver (Macintosh) Now, let’s play back the sample data to verify that the connections and settings are correct. We will use iTunes to play back the sample data provided on the included CD- ROM. Before you continue, connect headphones or monitor speakers to the FA-101 as described in “Basic connections” (p. 25). 1 Set the FA ...

  • Edirol FA-101 - page 17

    17 Installing the driver (Windows) What is a driver? A driver is software that allows data to be transferred between the FA-101 and application software running on your computer when the FA-101 is connected to your computer via a FireWire (IEEE 1394) cable. The driver sends data from your application software to the FA-101, and from the FA- 101 to ...

  • Edirol FA-101 - page 18

    18 Installing the driver (Windows) 8 From the Windows start menu, choose “Run...” The “Run” dialog box will appear. 9 Input the name into the dialog box as shown, and click [OK] . fig.win-run (Drive name): DriverXP_ENGsetup.exe * The drive name is “D:” in the example shown here, but this may be different on your system. Specify the d ...

  • Edirol FA-101 - page 19

    19 Installing the driver (Windows) 14 A dialog box entitled “Completing the Found New Hardware Wizard” appears. Click [Finish] . Once again, the “Found New Hardware” message appears near the taskbar. Please wait. 15 A dialog box entitled Welcome to the Found New Hardware Wizard appears. Make sure that the box indicates “EDIROL FA-101 Sub ...

  • Edirol FA-101 - page 20

    20 Installing the driver (Windows) Next, you need to set your computer so priority is given to background services, which will help to assure that audio and MIDI processing occur smoothly. ( ➔ “Giving priority to background services” (p. 21)) If you changed the “Driver Signing Options” setting (p. 17, step 4), restore the setting to its p ...

  • Edirol FA-101 - page 21

    21 Installing the driver (Windows) Crackling may occur in the sound if you omit making this setting. To ensure that audio and MIDI are processed smoothly, make the setting as follows. 1 Open the System Properties dialog box. 1. From the Windows start menu, choose Control Panel . 2. In “Pick a category,” click “Performance and Maintenance” . ...

  • Edirol FA-101 - page 22

    22 Installing the driver (Windows) In order to get the best performance from the software you are using, you must choose the correct device settings. The FA-101’s audio driver supports WDM and ASIO 2.0. Audio devices Note 1: Refer to “How WDM ports correspond to FA-101 output jacks” (p. 22). MIDI devices * For details on how to make settings ...

  • Edirol FA-101 - page 23

    23 Installing the driver (Windows) If you will be using the Windows Media Player application with the FA-101, specify the input/output devices as follows. The method in which you make device settings will depend on the software you are using. For details, refer to the owner’s manual for your software. 1 Open the Sound, Speech, and Audio Devices P ...

  • Edirol FA-101 - page 24

    24 Installing the driver (Windows) Now, let’s play back the sample data to verify that the connections and settings are correct. We will use standard Windows functionality to play back the sample data provided on the included CD-ROM. Before you continue, connect headphones or monitor speakers to the FA-101 as described in “Basic connections” ...

  • Edirol FA-101 - page 25

    25 Basic connections and settings This section explains basic connections and data flow for the FA-101. Refer to the block diagram printed on the front cover of the manual as you read this section. * Before making connections to other equipment, turn down the volume of all your equipment and turn off the power to avoid causing malfunctions or damag ...

  • Edirol FA-101 - page 26

    26 Basic connections and settings Here’s how to make connections and settings to let you sing or play your guitar while listening to audio data on your computer, and record just the vocal or guitar into your sequencer. fig.mic-guitar Connections The sound of the mic connected to INPUT 1 will be recorded in your computer as the left (L) channel. I ...

  • Edirol FA-101 - page 27

    27 Basic connections and settings Input sensitivity knob Use the input sensitivity knob to adjust the input level. For the best audio quality, raise the level until it is as high as you can get it without causing the input level indicator to light in red. Other notes Don’t connect anything to jacks you are not using. Howling could be produced dep ...

  • Edirol FA-101 - page 28

    28 Basic connections and settings fig.digital Connections Connect your digital device to the digital input connector. Sample rate select switch Set this to match the sample rate of your digital playback device and the sample rate of your recording software. If you switch the FA-101's sample rate, you must turn the power of the FA-101 off, then ...

  • Edirol FA-101 - page 29

    29 Basic connections and settings fig.send-return Connections Connect output jacks 3–8 to your external mixer or other device. Connect the outputs of your external mixer or other device to input jacks 3–6. Connect the outputs of your synthesizer or other device to input jacks 7–8. Direct monitor volume This adjusts the monitor volume. Adjusti ...

  • Edirol FA-101 - page 30

    30 Software settings You will need to make audio and MIDI device settings for the software you’re using. Here are some examples for typical software applications. In this example we are using SONAR 3 Producer Edition. You must make the following settings if you have switched the FA-101's sample rate or have changed the buffer size in the FA- ...

  • Edirol FA-101 - page 31

    31 Software settings fig.sonar-2.eps 8. Click the Drivers tab. In the lists of Input Drivers and Output Drivers , click the following devices to highlight them (white characters on blue background), and un-highlight all other devices. Click [OK] . 9. Restart SONAR, and from SONAR's Options menu, choose Audio to open the Audio Options dialog bo ...

  • Edirol FA-101 - page 32

    32 Software settings In this example we are using Digital Performer 4.12. fig.digiperf.eps 1. Power up the FA-101, and then start up Digital Performer. 2. From Digital Performer’s Setup menu, choose Audio System , and verify that MOTU Audio System is checked. 3. From the Setup menu, choose Configure Audio System - Configure Hardware Driver . The ...

  • Edirol FA-101 - page 33

    33 Software settings In this example we are using the Macintosh version of Cubase SX/SL. 1. Power up the FA-101, and then start up Cubase. 2. From the Devices menu, choose Device Setup to open the Device Setup dialog box. 3. In the Devices list at the left side of the dialog box, choose VST Multitrack . 4. Select the Setup tab in the right side of ...

  • Edirol FA-101 - page 34

    34 Software settings Here is an example using Logic Platinum 6. 1. Power up the FA-101, and then start up Logic. 2. From the Logic Platinum menu, choose Preferences - Audio Hardware & Driver to open the Preferences dialog box. 3. In the Core Audio section, set Driver to EDIROL FA-101 . 4. Select (add a check mark to) the checkbox located at the ...

  • Edirol FA-101 - page 35

    35 Software settings There is no FA-101 Driver Settings dialog box on Macintosh. Make settings from within your software. You can adjust the audio latency by changing the FA-101 driver settings. Decreasing the buffer size will shorten the latency. Increasing the buffer size may eliminate problems such as clicks or pops in the sound. * Latency is th ...

  • Edirol FA-101 - page 36

    36 Software settings If you still experience clicks or pops even though you have specified the largest buffer size, check Use Maximum Buffer Setting . If this item is checked, the slider and the settings of the WDM and ASIO items will be ignored, and an even larger buffer size will be used. If you still experience clicks or pops even after doing th ...

  • Edirol FA-101 - page 37

    37 Troubleshooting If you experience problems, read this chapter first/ It contains tips for solving most problems. You attempted to install as described in “Installing the driver,” but did not succeed. Install the FA-101 driver once again as described in “Installing the driver (Windows)” (p. 17). Also check the Device Manager to see whethe ...

  • Edirol FA-101 - page 38

    38 Troubleshooting Does your computer or FireWire (IEEE 1394) repeater hub have a sufficient power supply? If you are using bus power, the FA-101 cannot be connected if insufficient power is being supplied to it. Check whether the following cases might apply. • If you are using a notebook computer running on its battery, operation may be unstable ...

  • Edirol FA-101 - page 39

    39 Troubleshooting Are the volume controls of the FA-101 set appropriately? Adjust the headphone volume knob and direct monitor volume of the FA-101’s front panel. Is your audio playback system (e.g., stereo) connected correctly? Make sure that the FA-101’s output jacks are correctly connected using audio cables to the input jacks of your audio ...

  • Edirol FA-101 - page 40

    40 Troubleshooting Are the input sensitivity knobs and direct monitor volume knob set appropriately? Turn the knobs toward the right to adjust the volume. Is the headphone volume knob raised appropriately? Turn the knob toward the right to adjust the volume. Could the sample rate select switch be set to 192 kHz? If you are using the FA-101 at 192 k ...

  • Edirol FA-101 - page 41

    41 Troubleshooting In Windows, did you make the setting described in “Giving priority to background services”? In order to ensure that audio/MIDI processing occurs smoothly, make the setting described in “Giving priority to background services.” ( ➔ “Giving priority to background services” (p. 21)) In Macintosh, check the Energy Saver ...

  • Edirol FA-101 - page 42

    42 Troubleshooting Could two or more computers be connected to the FA-101 or to your mixer or audio devices? Try connecting the FA-101 to only one computer. Check whether the noise disappears when the FA-101 is connected to only one computer. Connecting numerous audio devices to a computer may produce noise in some situations. If this occurs, conne ...

  • Edirol FA-101 - page 43

    43 Troubleshooting Is the FA-101 connected to a FireWire (IEEE 1394) hub? Try connecting the FA-101 directly to the FireWire (IEEE 1394) connector of your computer itself. Noise may be entering via the line inputs or mic inputs. If a MIDI sound module with a FireWire (IEEE 1394) connector is connected via FireWire (IEEE 1394) to the same computer a ...

  • Edirol FA-101 - page 44

    44 Troubleshooting Has a mic or guitar been left connected? If a mic or guitar is connected to the FA-101, disconnect the mic or guitar and turn the input sensitivity knob all the way toward the left (lowering the input level). Have you connected the grounding terminal? Connecting the chassis of your computer or the grounding terminal of your compu ...

  • Edirol FA-101 - page 45

    45 Troubleshooting The first time you use the FA-101 with Cubase, turn on the power with the FA-101's sample rate select switch at the 44.1 kHz position. If this switch is not set to 44.1 kHz, it may be impossible to start Cubase. Others Can’t start the Cubase FA-101_e.book 45 ページ ２００５年１１月２４日　木曜日　午後? ...

  • Edirol FA-101 - page 46

    46 Main Specifications ● Number of Audio Record/ Playback Channels <44.1/48/88.2/96 kHz> (Full duplex) Record: 10 channels Playback: 10 channels <192 kHz> (Full duplex) Record: 6 channels Playback: 6 channels * Some computers may not have sufficient performance. ● Signal Processing PC interface: 24 bits AD/DA Conversion: 24 bits (li ...

  • Edirol FA-101 - page 47

    47 Index Numerics 4-pin ....................................................................... 12 6-pin ....................................................................... 12 A AC adaptor jack ....................................................... 12 ASIO .......................................................... 22, 35–36 Audio devices ... ...

  • Edirol FA-101 - page 48

    03565667 ’05-12-3N As of December 10, 2005 (EDIROL-1) Information When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor in your country as shown below. EUROPE EDIROL (Europe) Ltd. Studio 3.4 114 Power Road London W4 5PY U. K. TEL: +44 (0)20 8747 5949 FAX:+44 (0)20 8747 5948 http://www ...

Manufacturer Edirol Category Musical Instrument

Documents that we receive from a manufacturer of a Edirol FA-101 can be divided into several groups. They are, among others:
- Edirol technical drawings
- FA-101 manuals
- Edirol product data sheets
- information booklets
- or energy labels Edirol FA-101
All of them are important, but the most important information from the point of view of use of the device are in the user manual Edirol FA-101.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Edirol FA-101, service manual, brief instructions and user manuals Edirol FA-101. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Edirol FA-101.

Similar manuals

A complete manual for the device Edirol FA-101, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Edirol FA-101 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Edirol FA-101.

A complete Edirol manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Edirol FA-101 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Edirol FA-101, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Edirol FA-101, that we can find in the current document
3. Tips how to use the basic functions of the device Edirol FA-101 - which should help us in our first steps of using Edirol FA-101
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Edirol FA-101
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Edirol FA-101 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Edirol FA-101?

Use the form below

If you did not solve your problem by using a manual Edirol FA-101, ask a question using the form below. If a user had a similar problem with Edirol FA-101 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)