English dropdown-ico

Manual Miele W 487 WPS

76 pages 1.12 mb
Download

Go to site of 76

Summary
  • Miele W 487 WPS - page 1

    Operating instructions f or W ashing machine W 487 WPS T o avoid the risk of accidents or damage to the machine it is essential to read these operating instructions before it is installed or used for the first time. G M.-Nr . 05 660 531 ...

  • Miele W 487 WPS - page 2

    Disposal of the packing material The transport and protective packing has been selected from materials which are envir onmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suf focation! Rather than just thr ...

  • Miele W 487 WPS - page 3

    Caring for our en vironment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of your old appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 W arning a ...

  • Miele W 487 WPS - page 4

    Selecting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ...

  • Miele W 487 WPS - page 5

    The drum door cannot be opened by pressing the Door button . . . . . . . . . . . . . . 46 Opening the drum door in the event of a blocked drain outlet and/or power failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Blocked drain outlet . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Miele W 487 WPS - page 6

    Read the operating instructions before using this machine for the first time. They contain important information about the safety , use and maintenance of the machine. This way you will avoid the risk of accidents and damage to the machine. Keep these operating instructions in a safe place and ensure that new users are familiar with the content. Pa ...

  • Miele W 487 WPS - page 7

    The Miele "W aterproof system" protects fr om water damage provided the following conditions have been met: – the machine is correctly plumbed in and connected to the electricity supply . – if a fault has been identified, the machine must be examined by a competent person before further use, and repair ed if necessary . Faulty compone ...

  • Miele W 487 WPS - page 8

    If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however , you do wish to descale the machine only use proprietary non-corrosive descaling agents and strictly observe the instructions on the packaging. If in doubt, contact the Miele Customer Ser - vice Dept. or your Miele Dealer . T extiles which have ...

  • Miele W 487 WPS - page 9

    Special programmes – Programme for hand-washable fabrics (Silks / ) Hand-washable fabrics which crease easily and do not contain wool can be washed in the Silks / programme (30°C temperatur e option only). – Programme for hand-washable fabrics (WOOLLENS / ) Hand-washable or machine-washable wool or wool blend fabrics can be washed in the WOOLL ...

  • Miele W 487 WPS - page 10

    Delay start h/mins Delay start allows you to delay the star t of a programme fr om 30 minutes up to a maximum of 24 hours. Time left display After the start of a programme, the duration of the programme selected will be shown in the display counting down in hours and minutes and finally in minutes. At some points during the wash programme the time ...

  • Miele W 487 WPS - page 11

    Control panel a Multi-function display see the following page for more information. b ST ART b utton starts the wash programme c Delay start button for delaying the start of a programme d Additonal option b uttons indicator light on = option selected indicator light off = option not selected e Spin button for selecting the final spin speed, Rinse h ...

  • Miele W 487 WPS - page 12

    Multi-function display a Display b Display indicator lights c This button has the following two functions: – changes the display from Load % , Detergent % and Time left h/mins – sets the load sensors to zero T o enable you to wash environmentally and economically: – the washing machine calculates the amount of laundry loaded. This is displaye ...

  • Miele W 487 WPS - page 13

    Important control panel features Programme selector The programme selector is used to set the basic wash programme and the temperature for that pr ogramme. The light ring will go out a few minutes after the end of the programme to save energy . Additional option b uttons Additional options can be added to the basic programme. Pressing the r elevant ...

  • Miele W 487 WPS - page 14

    Before using the machine for the first time ensure that it is corr ectly installed and connected. See the relevant section under "Installation". Also check that the fluff filter is securely tightened. Otherwise ther e is a risk of water leakage during use. For safety reasons spinning is not possible until the machine has been prepar ed fo ...

  • Miele W 487 WPS - page 15

    Energy and water consumption – W ater consumption and energy usage are determined by the size of the load. – Use the Mixed wash or the Quick wash programme for smaller amounts of laundry . – When smaller amounts of laundry are washed in the COTTONS programmes, the automatic load recognition system will r educe the amount of water , time and e ...

  • Miele W 487 WPS - page 16

    Brief instructions Please note: T o help familiarise yourself with how to use your washing machine please read the sections "Before washing", "Selecting a programme" and "At the end of a programme" in detail. A Sort the laundr y into colours and fabric types Selecting a programme: B Switch on the washing machine C Open ...

  • Miele W 487 WPS - page 17

    Programme c hart CO TTONS 9ö876 Fabric Cottons and linen fabrics, e.g. bed linen, table linen, towelling, jeans, underwear , T -shirts, nappies. Additional options Soak, Pre-wash, Intensive, W ater plus Notes – Only use the COTTONS 95°C programme for heavily soiled and incontinent laundry . – For heavy soiling where staining is visible, use t ...

  • Miele W 487 WPS - page 18

    DELICA TES 21 + COLD Fabric Acrylics, acetate and triacetate, 100% cotton easy care shirts and blouses. Curtains, specified machine-washable by the manufacturer . Additional options Soak, Pre-wash, Intensive Notes – For heavy soiling where staining is visible, use the Intensive additional option. – Laundry remains relatively cr ease-free for ea ...

  • Miele W 487 WPS - page 19

    Quick wash 7 Fabric V er y lightly soiled fabrics, which can be washed in the Cottons programme. Notes – If fabrics have a high proportion of man-made fibres it is advisable to programme the machine for "Gentle Action". See "Programmable functions". Note that this pr ogramme is not suitable for delicate items. Additional optio ...

  • Miele W 487 WPS - page 20

    Care symbols - washing Care symbols Fabric types Description of process Programme: (select the appropriate temperatur e according to the temperatur e on the care label symbol) e no bar Cottons Normal (maximum) machine action and normal spinning Cottons, Minimum iron, Quick wash f * single bar Synthetics Reduced (medium) machine action and reduced s ...

  • Miele W 487 WPS - page 21

    Important - other care symbols / Hand wash (If no temperature is specified use the lowest temperature or cold) h Do not wash apf Dry clean D Do not dry clean y Suitable for chlorine bleaching z Do not use chlorine bleach T umble dry q At normal temperature r At low temperature s Do not tumble dry Ironing I Hot iron H Medium hot iron G Cool iron J D ...

  • Miele W 487 WPS - page 22

    Before washing A Sort the laundr y ^ Empty all pockets. , Foreign objects (e.g. nails, coins, paper clips, etc.) can cause damage to garments and components in the machine. ^ Badly soiled areas, e.g. collars and cuffs, and water soluble stains can be pre-tr eated with bar soap, liquid detergent or detergent mixed into a solution or paste. With part ...

  • Miele W 487 WPS - page 23

    Selecting a programme T o add detergent with the help of the dispensing recommendation featur e, follow steps B , C and D below before loading the drum. B Switch on the washing machine ^ Press in the I-ON/0-OFF button. C Open the drum door ^ Press the Door button and open the drum door . The washing machine is switched on. If the programme selector ...

  • Miele W 487 WPS - page 24

    G Add deter gent. The percentage amounts in the display help you to add the correct per centage amount of detergent recommended by the detergent manufacturer . If the display shows: 40 Add 40 percent ... (slightly less than half) 50 Add 50 percent ... (half) 60 Add 60 percent ... (slightly more than half) 75 Add 75 percent ... (three quarters) 100 ...

  • Miele W 487 WPS - page 25

    Additional options H Selecting additional options ^ Press the appr opriate additional option button. Soak For heavily soiled and stained items with protein stains (e.g. blood, fats and oils, cocoa). Duration of soak: A length of time between 30 minutes and 6 hours can be chosen, in 30 minute increments. – When the "Soak" button is press ...

  • Miele W 487 WPS - page 26

    I Select a spin speed ^ Press the "Spin" button r epeatedly until the indicator light for the spin speed you want comes on. In some programmes the maximum spin speed is limited. The machine will not allow a higher spin speed to be selected. Delay start J Select delay start if required. ^ Press the Delay start button. Each press on the but ...

  • Miele W 487 WPS - page 27

    At the end of a programme When the Anti-crease/Finish indicator light comes on the laundry can be removed fr om the drum. (This light stays on at the end of the programme and remains on until the selector is turned back to the Finish position). L Open the drum door ^ Press the Door button. M Remove the laundry , Only remove laundry from the machine ...

  • Miele W 487 WPS - page 28

    Adding or remo ving laundry after a programme has started Laundry can be added or removed after the programme has started when using the following programmes: – COTTONS – MINIMUM IRON – Quick wash – Mixed wash – Starch ^ Press the Door button in and hold it until the door springs open. ^ Add or remove items. ^ Close the door . The program ...

  • Miele W 487 WPS - page 29

    Interrupting a programme ^ Switch the washing machine off with the I-ON/0-OFF button. T o continue with the same programme: ^ Switch the machine back on with the I-ON/0-OFF button. Altering a programme once selected The machine will accept the following changes after a programme has started: – at any time after the start , the spin speed can be c ...

  • Miele W 487 WPS - page 30

    Programme sequence This washing machine has fully electronic contr ols with automatic load recognition. This machine takes in the right amount of water requir ed for the programme depending on the amount of laundry and its absorbency rate. This means that programme cycles and durations shown in the display can vary . The programme sequences outline ...

  • Miele W 487 WPS - page 31

    WOOLLENS Main wash W ater level: medium W ash rhythm: Woollens Rinses W ater level: medium No of rinses: 2 Spinning Rinse and interim spin 2) : yes Final spin: yes Quick wash Main wash W ater level: low W ash rhythm: normal Rinses W ater level: medium No of rinses: 2 Spinning Rinse and interim spin 2) : yes Final spin: yes Mixed wash Main wash W at ...

  • Miele W 487 WPS - page 32

    All modern detergents produced for automatic washing machines are suitable, including liquid, compact (concentrated), tablets, liquid tablets and special application detergents. Use dispensing aids, e.g. balls, if these are supplied with the detergent. T ablets are suitable for full loads but note that it may be impractical to reduce tablets by pro ...

  • Miele W 487 WPS - page 33

    Fabric conditioner s and liquid starc h Fabric conditioners make garments soft and fluffy to handle and help pr event static cling when tumble drying. Starch stif fens and gives body to items of laundry , e.g. shirts, tablecloths and bed linen. ^ Dispense according to the amount specified on the packaging. A utomatic dispensing of fabric con - diti ...

  • Miele W 487 WPS - page 34

    Electronic pr ogramme locking Programme locking pr events the machine from being opened or the programme cancelled during a wash programme. T o activate programme locking ^ After the start of a programme, press the ST ART button for at least 4 seconds until the locked check light (lower right on the control panel) comes on. Programme locking is now ...

  • Miele W 487 WPS - page 35

    Electronic system loc k The system lock prevents your machine being used without your knowledge. When the system lock has been activated: – the drum door cannot be opened with the Door button and – a programme cannot be started. T o activate the system loc k First, ensure that: – The drum door is closed – The programme selector is at Finish ...

  • Miele W 487 WPS - page 36

    , Disconnect the appliance from the mains electricity supply and withdraw the plug from the socket prior to cleaning the machine. ^ Clean the casing with a mild non-abrasive detergent or soap and water . Wipe dr y with a soft cloth. ^ Clean the fascia panel with a damp cloth and wipe dry with a soft cloth. ^ The drum can be cleaned using a suitable ...

  • Miele W 487 WPS - page 37

    Cleaning the detergent dispenser drawer Remove detergent residues r egularly . ^ Pull out the detergent dispenser drawer until a resistance is felt. Pr ess down the release catch and at the same time pull the drawer right out of the machine. ^ Clean the detergent drawer with warm water . ^ Clean the siphon. 1. Remove the siphon from compartment § ...

  • Miele W 487 WPS - page 38

    Cleaning the filter in the water inlet The washing machine has a filter to protect the water inlet valve. The accessible filter in the union in the open end of the inlet hose should be checked every six months, or more often if there ar e frequent interruptions to the external water supply . ^ First turn off the stopcock. ^ Unscrew the thr eaded un ...

  • Miele W 487 WPS - page 39

    What to do if ... With the help of the following notes, minor faults in the perfor mance of the appliance, some of which may result fr om incorrect operation, can be put right without contacting the Service Department. , Repair work to electrical appliances should only be carried out by a suitably qualified person in accordance with local and natio ...

  • Miele W 487 WPS - page 40

    The programme does not start Fault indicator P ossible cause Remedy The Anti-crease / Finish indicator light is not on, or the ST ART indicator light is not flashing. There is no power . Check that – the mains plug is plugged in. – the fuse or circuit br eaker has not tripped. The ST ART indicator light is not flashing. The lamp for the drum li ...

  • Miele W 487 WPS - page 41

    The wash programme stops and a fault indicator light comes on. Fault indicator P ossible cause Remedy A The buzzer sounds and the Check drain light flashes. "– – –" appears in the display . The water outlet is blocked. Clean the fluff filter and the drain pump as described in "Problem solving guide - Opening the door in the eve ...

  • Miele W 487 WPS - page 42

    A fault indicator light comes on but the wash pr ogramme con - tinues as normal. Fault indicator P ossible cause Remedy A The Check drain light flashes. The drain outlet is restricted. Clean the fluff filter and the drain pump as described in "Problem solving guide - Opening the door in the event of a blocked drain outlet and/or power failure& ...

  • Miele W 487 WPS - page 43

    Prob lems with the load size indicator and the dispensing recommendation Prob lem P ossible cause Remedy There is no load size in the display The washing machine is not switched on and / or a programme has not been selected. Switch the washing machine on. Select a programme and load the drum. The amount of laundry in the drum is less than 25% of th ...

  • Miele W 487 WPS - page 44

    General prob lems or an unsatisfactory wash result Prob lem P ossible cause Remedy The machine shakes during the spin cyc le. The four feet are not resting evenly on the floor . Level the machine. See advice on installation. The laundry has not been spun satisfactorily . The spin speed selected was too low . Select a higher spin speed next time. Th ...

  • Miele W 487 WPS - page 45

    Prob lem P ossible cause Remedy Liquid detergent does not give the required result. Liquid detergents do not contain bleaching agents. They do not remove fruit, cof fee and tea stains. – Use a general purpose washing machine powder containing a bleaching agent. – Pour stain removers into compartment j of the dispenser drawer and liquid detergen ...

  • Miele W 487 WPS - page 46

    The drum door cannot be opened by pressing the Door b utton P ossible cause Remedy The machine is not connected to the electricity supply . Insert the plug in the socket and switch on. The machine is not switc hed on. Switch the machine on with the I-ON/0-OFF button. The electronic pr ogramme lock has been activ ated. This is automatically deactiva ...

  • Miele W 487 WPS - page 47

    Opening the drum door in the event of a b locked drain outlet and/or power failure ^ Switch the washing machine off. There is a filter flap opener behind the detergent drawer fascia panel. ^ Remove the opener . ^ Use it to open the access flap. Blocked drain outlet If the drain outlet is blocked, up to 25 litres of water will be r etained in the ma ...

  • Miele W 487 WPS - page 48

    Once the flow of water ceases: ^ Remove the fluff filter completely . ^ Clean the fluff filter thor oughly . ^ Remove any foreign objects (e.g. buttons, coins, etc.) and fluff. T urn the impeller by hand to check that it rotates fr eely . Any foreign object causing an obstruction should be removed. ^ Put the fluff filter back in place and secure. , ...

  • Miele W 487 WPS - page 49

    Changing the lamp for the drum lighting The washing machine will still operate with no lighting in place or if the lighting is faulty . ^ Remove the yellow lever from behind the detergent drawer facia panel as described previously . ^ Switch the washing machine on and open the drum door . ^ Now disconnect the washing machine from the electricity su ...

  • Miele W 487 WPS - page 50

    Customer contact In the event of any faults which you cannot remedy yourself please contact – Y our Miele dealer or – Y our nearest Miele Service Department (see back cover for the address). When contacting the Service Department, please quote the model and serial number of your appliance, both of which are shown on the data plate visible at th ...

  • Miele W 487 WPS - page 51

    Front vie w a Inlet hose with "W aterproof" system b Electricity supply cable c - f Flexible drain hose (with detachable swivel elbow) g Facia panel with controls h Detergent dispenser drawer i Drum door j Flap for fluff filter , drain pump and emergency release k Handle recesses for moving the machine l Four height adjustable feet Instal ...

  • Miele W 487 WPS - page 52

    Rear view a Protruding lid edge for holding when moving the machine b Electricity supply cable c Inlet hose with "W aterproof" system d Drainage hose e T ransit bar covers f Restraining clip for: – Inlet hose – Drain hose – Electricity supply cable – T ransit bars when removed Installation and connection 52 ...

  • Miele W 487 WPS - page 53

    Installation surface A concrete floor is the most suitable installation surface for a washing machine, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note the following points: ^ The machine must be level and securely positioned. ^ T o avoid vibrations during spinning, the machine shoul ...

  • Miele W 487 WPS - page 54

    ^ Using the spanner supplied turn the left-hand transit bar 90°, then ^ withdraw the transit bar . ^ T ur n the right-hand transit bar 90°, then ^ withdraw the transit bar . Installation and connection 54 ...

  • Miele W 487 WPS - page 55

    ^ Fit the covers on to the two holes. Then plug the holes as shown with the caps. ^ Secure the transit bars to the back of the washing machine. Make sure that holes b are fitted over r etainers a . , The washing machine must not be moved without the transit bars in place. Store the transit bars as shown or keep them in a safe place for future use. ...

  • Miele W 487 WPS - page 56

    Levelling the mac hine The machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may incr ease electricity and water consumption and may cause the machine to move about. False values may also show in the Load % and Detergent % display . Screwing out and adjusting the f eet The four adjustabl ...

  • Miele W 487 WPS - page 57

    This washing machine is not suitable for building under a worktop. W asher and Dr yer stac k A Miele tumble dryer can be stacked with the washing machine. A stacking kit is necessary and can be purchased from the Miele Spar e Parts Depar tment. Please note: a Safety distance to wall: at least 2 cm b Height: Stacking kit with pull-out shelf: approx. ...

  • Miele W 487 WPS - page 58

    The Miele W aterproof system The Miele W aterproof system pr otects the washing machine from water damage. The system consists of three main components: 1) the inlet hose 2) the electronic unit and the washing machine housing 3) the drain hose 1) Inlet hose – The inlet hose is fitted with an additional electrical safety valve which works like an ...

  • Miele W 487 WPS - page 59

    Connection to the water supply The plastic casing of the safety valve contains electrical components. The W ater- proof system must only be connected to its own stopcock. It must not be connected to mixer taps or similar and must not be fitted in areas wher e there is the risk of water or other liquids reaching it. Do not get wet. The protective sl ...

  • Miele W 487 WPS - page 60

    The machine should be connected to a mains water supply in accordance with local and national safety regulations. The German authorities do not require it to have a non-return valve as the washing machine has been designed to comply with DIN regulations. The machine is designed to operate with a flow pressur e of between 1 and 10 bar . If it is hig ...

  • Miele W 487 WPS - page 61

    Connection to the drainage system The machine drains via a drain pump with a delivery head of 1 metre*. The drain hose must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if requir ed, with a sharp twist and pull. If requir ed, the drain hose can be extended to ...

  • Miele W 487 WPS - page 62

    Electrical connection U .K. All electrical work should be carried out only by a suitably qualified and competent person, in strict accordance with national and local safety regulations. The appliance is supplied with a mains cable with moulded plug for connection to a 230-240V mains supply . The v oltage, rated load and fuse rating are given on the ...

  • Miele W 487 WPS - page 63

    Non-rewireab le plugs BS 1363 If this machine is fitted with a non-rewir eable plug, the following information applies: If the socket outlets are not suitable for the plug supplied with the product, it must be cut off and an appr opriate plug fitted. The fuse carrier and fuse should be removed fr om the old plug and disposed of. The old plug should ...

  • Miele W 487 WPS - page 64

    Load Consumption data Energy W ater Duration in kWh in litres Normal Intensive CO TTONS 95°C 5.0 kg 1.70 45 1 h 26 min 1 h 41 min 60°C 1) 5.0 kg 0.95 45 – 1 h 56 min 1) 60°C 5.0 kg 0.95 45 1 h 26 min – 40°C 1) 5.0 kg 0.50 45 – 1 h 56 min 1) 40°C 5.0 kg 0.50 45 1 h 26 min – MINIMUM IRON 40°C 1) 2.5 kg 0.45 49 – 1 h 14 min 1) 40°C 2. ...

  • Miele W 487 WPS - page 65

    Height 85.0 cm Width 59.5 cm Depth 58.0 cm Depth with door open 94.5 cm Weight 94 kg Maximum floor load 1600 Newton (approx. 160 kg) Capacity 5 kg dry laundr y V oltage see data plate Rated load see data plate Fuse rating see data plate Consumption data see "Consumption data" W ater flow pressur e minimum 1 bar (100 Pa) W ater flow pressu ...

  • Miele W 487 WPS - page 66

    66 ...

  • Miele W 487 WPS - page 67

    Progr ammable functions f or changing standard settings ...

  • Miele W 487 WPS - page 68

    The programmable functions can be used to tailor washing programmes to suit your individual requir ements. W ater plus system Selecting the W ater plus additional option increases the water intake in the programmes listed below . The water intake is increased in the wash and rinse stages and in the COTTONS and MINIMUM IRON programmes an extra rinse ...

  • Miele W 487 WPS - page 69

    Follow steps A to G to pr ogramme and store a setting in memory . The programmable functions ar e activated to call up further features not shown on the control panel by using the additional option buttons in combination with the programme selector . Before you begin, first ensur e that: – The washing machine is switched off. – The drum door is ...

  • Miele W 487 WPS - page 70

    Gentle action Activating gentle action reduces the drum action. Slightly soiled items are washed more gently . It should be activated for garments with a single bar under the care label and for articles which feel too hard after they have been dried. Gentle action can be used in the COTTONS, MINIMUM IRON, Quick wash , Starch and Mixed wash programm ...

  • Miele W 487 WPS - page 71

    T op-up rinse f or CO TT ONS When this is activated, additional wa - ter flows into the drum at the end of the main wash to cool the suds down. Hot suds can damage plastic drainage pipes. T op-up rinse takes place when temperatures of 95°C and 75°C ar e selected. T op-up rinse should be activated: – to prevent the danger of scalding if the drai ...

  • Miele W 487 WPS - page 72

    Memory function If an additional option(s) is selected for a programme, and / or the spin speed is altered, the machine stor es these changes in memory at the star t of a programme. When that particular programme is chosen again, the display will show the additional option(s) and / or spin speed which have been stored for that programme in the memo ...

  • Miele W 487 WPS - page 73

    Buzzer When the buzzer function has been activated, an audible tone sounds repeatedly at the end of a programme or when Rinse hold is reached. The buzzer will sound for up to an hour after the programme has finished. The washing machine is delivered with the buzzer deactivated. Follow steps A to G to pr ogramme and store in memory . The programmabl ...

  • Miele W 487 WPS - page 74

    74 ...

  • Miele W 487 WPS - page 75

    75 ...

  • Miele W 487 WPS - page 76

    Alteration rights reserved/1103 This paper consists of cellulose which has been bleached without the use of chlorine. M.-Nr . 05 660 531 / 01 ...

Manufacturer Miele Category Washer

Documents that we receive from a manufacturer of a Miele W 487 WPS can be divided into several groups. They are, among others:
- Miele technical drawings
- W 487 WPS manuals
- Miele product data sheets
- information booklets
- or energy labels Miele W 487 WPS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Miele W 487 WPS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Miele W 487 WPS, service manual, brief instructions and user manuals Miele W 487 WPS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Miele W 487 WPS.

Similar manuals

A complete manual for the device Miele W 487 WPS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Miele W 487 WPS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Miele W 487 WPS.

A complete Miele manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Miele W 487 WPS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Miele W 487 WPS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Miele W 487 WPS, that we can find in the current document
3. Tips how to use the basic functions of the device Miele W 487 WPS - which should help us in our first steps of using Miele W 487 WPS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Miele W 487 WPS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Miele W 487 WPS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Miele W 487 WPS?

Use the form below

If you did not solve your problem by using a manual Miele W 487 WPS, ask a question using the form below. If a user had a similar problem with Miele W 487 WPS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (2)

Paolo

Buongiorno la mia lavatrice Miele softtronic W487 ,sul programma risciacquo comincia a suonare ,sapreste dirmi il motivo?Grazie Paolo

Toffali Franco

come devo fare per avere un manuale in italiano, per la lavatrice Miele Softronic W487?