-
Miele G 5910 - page 1
Operating Instructions Dishwasher G 5910 G 5915 To prevent accidents and appliance damage read these instructions before installation or use. M.-Nr. 07 909 211 en - US, CA ...
-
Miele G 5910 - page 2
IMPORTANT SAFETY INSTRUCTIONS .......4 Guide to the dishwasher ............................................8 Control panel ......................................................9 Caring for the environment .........................................1 0 Before using for the first time .......................................1 1 To open the door ....... ...
-
Miele G 5910 - page 3
Additional options ................................................4 4 Delay start .......................................................4 4 BrilliantLight ......................................................4 6 Settings ! .......................................................4 7 Water hardness .................................................. ...
-
Miele G 5910 - page 4
WARNING – When using your dishwasher, follow basic precautions, including the following: Read all instructions before installation or use of the dishwasher to prevent injury and machine damage. Use the dishwasher only for its intended purpose. This appliance is intended for residential use only. Keep these operating instructions in a safe place a ...
-
Miele G 5910 - page 5
Installation ~ The dishwasher must be installed and connected in accordance with the installation instructions. ~ Installation and repair work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. ~ Do not install or use a damaged dishwasher. A damaged appliance is da ...
-
Miele G 5910 - page 6
Use ~ To reduce the risk of injury, do not allow children to play in, on or near the dishwasher. It is possible for small fingers may be pinched in the door. ~ Only use the dishwasher if all panels are properly in place. ~ Do not tamper with the controls. ~ Do not sit or stand on the door or baskets of the dishwasher. Close the door when not in use ...
-
Miele G 5910 - page 7
~ This model offers a Drying Plus feature, i.e. the door will automatically shut once close enough to engage the catch. ~ Advise the user of the Drying Plus feature to avoid injuries by walking, bumping or knocking into the partially opened door. ~ Supervise children near the dishwasher to ensure fingers or other parts of the body are not caught wh ...
-
Miele G 5910 - page 8
a Upper spray arm (not visible) b Cutlery tray c Upper basket d Middle spray arm e Air inlet for drying (depending on model) f Lower spray arm g Triple filter system h Data plate i Child Safety Lock in the door handle (not visible) j Rinse aid reservoir k Dual compartment detergent dispenser l Salt container Guide to the dishwasher 8 ...
-
Miele G 5910 - page 9
Control panel a RemoteVision Indicator for RemoteVision enabled appliances. b Selection touch controls To select a menu point displayed next to the touch control. To change the displayed value (+/-). To browse between menus. The available touch controls light up when active. c K On/Off button with indicator To turn the dishwasher on or off. d Displ ...
-
Miele G 5910 - page 10
Energy saving washing This dishwasher is exceptionally economical in the use of water and electricity. For best results follow these tips: ^ For lowest energy consumption you may connect the dishwasher to a hot water source. ^ For fastest possible wash times, with slightly higher energy consumption, connect the dishwasher to a hot water source. ^ M ...
-
Miele G 5910 - page 11
To open the door The door will open automatically at the end of the program to aid in the drying process. This function can be deactivated (see "Settings - Drying Plus"). ^ Press the release catch inside the door grip. If the door is opened during operation, the dishwasher will stop running. Once the door is closed the program will restar ...
-
Miele G 5910 - page 12
Display The following can be selected in the display: – the wash program – the options – the start time – the settings menu ! – information During a running program the display shows: – the program name – the current time of day – the program sequence – the approximate remaining time – faults and messages To save energy the dish ...
-
Miele G 5910 - page 13
Welcome screen ^ Turn the dishwasher on s . The Welcome screen shows when the washer is turned on for the first time. Language The display changes automatically to the language setting. Sprache F [ [ [ $ ceština # dansk p ! deutsch OK ! ^ Select the desired language and confirm with OK. The selected language is marked with a L check. Clock f ...
-
Miele G 5910 - page 14
Time of day setting The display changes automatically to the time of day setting. Time of day [ [ [ + $ 10 :21 - # OK ! ^ Set the hours using the +/- controls and confirm with OK. Set the minutes and press OK. Display The display changes automatically to the screen for setting the time of day display. Time of day [ $ Do not display ( # On ! O ...
-
Miele G 5910 - page 15
To achieve good cleaning results, the dishwasher needs soft water. Hard water results in calcium deposits on dishware and in the dishwasher. If your tap water hardness is above 4 °d (4 gr/gal [US]), the water should be softened. – Your local water authority will be able to advise you of the water hardness level in your area. – The dishwasher m ...
-
Miele G 5910 - page 16
Every dishwasher is tested before leaving the factory. Any water remaining in the machine is from the final factory test and does not indicate that the machine has been used. Filling the salt container To achieve good cleaning results, the dishwasher needs soft water (water that is low in minerals). Hard water results in calcium deposits on dishwar ...
-
Miele G 5910 - page 17
^ Place the provided funnel over the salt container and carefully fill it with salt. The salt container holds approx. 4.4 lbs (2 kg) of salt, depending on the type of salt. ^ Clean any excess salt from the threads of the container opening. Screw the lid on firmly . ^ Immediately after each refill, run the "Rinse & Hold" program (witho ...
-
Miele G 5910 - page 18
Rinse aid Rinse aid helps to prevent spotting on dishes and glassware. The rinse aid is filled in the reservoir and the set amount will be automatically dosed. , Filling the rinse aid reservoir with detergent (liquid or powder) will damage the reservoir. Only pour rinse aid formulated for residential dishwashers into the reservoir. When using " ...
-
Miele G 5910 - page 19
Rinse aid indicator When the ( Refill rinse aid message appears, the reservoir contains sufficient rinse aid fo r2-3 programs only. ^ Add rinse aid once the program has finished. ^ Confirm with the OK button. The "Refill rinse aid" message will go out. If using "Tab" detergent products in your dishwasher, the messages can be tur ...
-
Miele G 5910 - page 20
, Do not wash items soiled with ash, sand, wax, grease or paint in the dishwasher. Ash and sand do not dissolve and will be distributed throughout the inside of the dishwasher. Wax, grease and paint will cause permanent discoloration and damage to the dishwasher. ^ Scrape food from dishes before placing them in the dishwasher, rinsing is not necess ...
-
Miele G 5910 - page 21
Items not recommended for dishwashing – Cutlery with wooden handles – Wooden cutting boards – Glued items such as old knives with handles glued together around the shank of the blade – Handmade craft items, antique, metal trimmed or decorative glassware – Plastic items that are not heat resistant – Copper, brass, tin or aluminum – Dis ...
-
Miele G 5910 - page 22
Typical load for 10 place settings with cutlery tray Upper basket Lower basket Cutlery tray Loading the dishwasher 22 ...
-
Miele G 5910 - page 23
Typical load for 16 place settings with cutlery tray Upper basket Lower basket Cutlery tray Loading the dishwasher 23 ...
-
Miele G 5910 - page 24
Upper basket , Always use the dishwasher with the upper and lower basket inserted (except during the Tall items program, if available). ^ Load the upper basket with small, lightweight, or delicate items such as cups, saucers, glasses, dessert bowls, etc. Shallow pans can also be placed in the upper basket. ^ Long items such as soup ladles, mixing s ...
-
Miele G 5910 - page 25
Jumbo cup rack (depending on model) : The cup rack can be set at two different widths so that it can also accommodate large cups. ^ Pull the cup rack upwards and click it back into position at the required width. Universal support bar The support bar will hold tall glasses and stem ware securely. ^ Fold the bar down and lean the desired glasses aga ...
-
Miele G 5910 - page 26
Adjusting the height: You can set the support bar at two different heights. ^ Pull the support bar upwards and click it back into position at the required height. Use the low setting for small glasses and tumblers. Use the high setting for tall glasses and stem ware. Loading the dishwasher 26 ...
-
Miele G 5910 - page 27
Adjusting the upper basket In order to gain more space for taller items the upper basket can be adjusted on three levels with 2 cm between each level. The upper basket can also be set at an angle with one side high and the other side low. Make sure, however, that the basket can slide smoothly in and out of the cabinet. ^ Slide out the upper basket. ...
-
Miele G 5910 - page 28
Lower basket ^ For larger and heavier items such as plates, serving platters, saucepans, bowls, etc. Glasses, cups, small plates and saucers can also be arranged in the lower basket. Dishwasher with cutlery tray Heavily soiled items ^ Place large platters and dishes in the center of the lower basket. When tilted, plates up to 13 3/4" (35 cm) i ...
-
Miele G 5910 - page 29
Removable MultiComfort insert The rear section of the lower basket is used for cups, glasses, plates, pots and pans. You can remove the MultiComfort insert to provide more space for larger items such as pots and pans. To remove the insert a ^ Press the yellow handle forwards and remove the insert. To replace the insert b ^ Slide the hooks of the in ...
-
Miele G 5910 - page 30
Universal support bar The support bar will hold tall glasses and stem-ware securely. ^ Fold the bar down and lean the desired glasses against it. ^ If desired, a section of the cutlery tray can be removed to allow for even taller glasses. Foldable spikes The rows of spikes can be lowered to make more room for larger items, such as casserole dishes. ...
-
Miele G 5910 - page 31
Cutlery Split cutlery tray (depending on model) ^ Arrange the cutlery as shown in the cutlery tray. For easier unloading cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. Spoon heads should be placed in contact with at least one of the serrated retainers on the base of the cutlery tray to ensure that water runs ...
-
Miele G 5910 - page 32
Cutlery basket (depending on model) The cutlery basket can be placed anywhere on the front rows of spikes in the lower basket. ^ To avoid risk of injury, knives and forks should be placed with the handles upwards in the basket. However, cutlery placed handle down in the basket will come out cleaner and drier. ^ Place small items of cutlery in the i ...
-
Miele G 5910 - page 33
Optional dishwasher accessories are available from your Miele dealer, Miele or Mieleusa.com (depending on your model some may already be supplied with your machine as standard). If you would like to... the following accessory will need to be ordered... ...wash a Miele Cappuccinatore ... a Cappuccinatore insert for the upper basket. ...wash addition ...
-
Miele G 5910 - page 34
Detergent , Dishwasher detergents contain irritant and corrosive ingredients. Avoid inhaling or swallowing dishwasher detergent. Keep children away from detergent. Keep detergent out of the reach of children. Keep children away from the dishwasher when the door is open. There could still be detergent residues in the dishwasher. Only add detergent j ...
-
Miele G 5910 - page 35
Adding detergent ^ Press the latch on the detergent dispenser. The flap will spring open. The flap is always open at the end of a program. ^ Add detergent to the compartments and close the container flap. ^ Use one tab or add powder or gel detergent to compartment II and close the flap. ^ If a Pre-rinse is desired, and available for your chosen pro ...
-
Miele G 5910 - page 36
Turning on ^ Make sure the spray arms can rotate freely. ^ Close the door. ^ Open the water supply, if closed. ^ Turn the dishwasher on K . The main menu shows in the display. If the memory function is selected, the last selected program is displayed. See "Settings J - Memory". Main menu 12:00 [ [ $ Settings F # Sensor Wash ! Expres ...
-
Miele G 5910 - page 37
Program guide When to use Program sequence Pre-rinse Main wash Interim rinse Final rinse Drying 12 1 2 Pots & Pans For normally soiled pots & pans with dried on food , and heavily soiled dishware, use 120% detergent recommended. XX X X X Normal Program for completely washing a full load of normally soiled dishware with the ability to adjust ...
-
Miele G 5910 - page 38
Program guide When to use Program sequence Pre-rinse Main wash Interim rinse Final rinse Drying 12 1 2 Energy Saver The water intake temperature must be 115°F (45°C) for light to normally soiled dishware XX X X Sensor Wash Sensor controlled program for normally soiled dishware as requ ired X as required X X Starch/Cheese For dishware with dried o ...
-
Miele G 5910 - page 39
Selecting options Options can be added to the selected program. ^ Select the Options menu. The display shows the available options for the selected program. Available options: Turbo: – For shortening the program duration. To achieve optimum results, energy consumption rates will increase. When the "Turbo" function is used in correlation ...
-
Miele G 5910 - page 40
Starting a program ^ Select Start. The program starts and "Items can be added" appears in the display. As long as this reference is shown, tableware can be added to the machine without impairing the cleaning result. , The water in the dishwasher is hot, risk of burns by splashing water. Cancel a program only in the first few minutes. Othe ...
-
Miele G 5910 - page 41
Standby A few minutes after the last key is pressed or at the end of the program the dishwasher will switch into Standby mode to save energy. ^ To turn the dishwasher back on press K . This feature can also be turned off (see "Settings - Optimize standby"). The dishwasher will then turn off completely after 6 hours. If the Standby setting ...
-
Miele G 5910 - page 42
Preparing your appliance for an extended vacation If you elect to turn off the water to your home for an extended period of time, please note that this may not be enough to reduce the risk of a leak. To be completely safe, you must turn off the water supply to each individual appliance. This means under the sink for a dishwasher, at the laundry bib ...
-
Miele G 5910 - page 43
Changing a program If the detergent flap is already open, do not change the program. If a program has already started and you wish to change it: Sensor Wash 12:21 [ 8 Items can be added Time left 1:10 h Cancel ! ^ Select Cancel and confirm with OK . The program is canceled. Sensor Wash 12:22 [ O Program finished Main menu ! ^ Select "Main menu ...
-
Miele G 5910 - page 44
Delay start The starting time of a program can be delayed between 15 minutes and 24 hours. The start can be delayed in 15-minute-increments. When using the "Delay Start" function make sure that the detergent compartment is dry before adding detergent, use a cloth if necessary. The detergent might stick together and not get completely rins ...
-
Miele G 5910 - page 45
^ Select Start . Sensor Wash 12:00 [ R Start at 10:00 Cancel ! The program name and start time are displayed. At the set time, the selected program will start automatically. A few minutes after the last key press, the dishwasher will switch into standby mode to save energy. The display and the indicators will turn off. Starting a program before the ...
-
Miele G 5910 - page 46
BrilliantLight The dishwasher is equipped with an interior light. With the door open the light turns off automatically after 15 minutes The light can also be deactivated. ^ Open and close the door quickly 3 times. The door must be opened enough so that the interior lighting turns on then off. From now on the interior lighting is turned off. ^ To tu ...
-
Miele G 5910 - page 47
The "Settings J " menu allows you to adjust standard settings Opening the Settings J menu ^ Turn the dishwasher on K . The main menu shows in the display. If the memory function is selected, the last selected program is displayed. See "Settings J - Memory". Switch to the main menu by pressing "Clear" U . Main men ...
-
Miele G 5910 - page 48
Language J The display contents can be shown in different languages. The displayed language can be changed by the submenu " Language J ". ^ Select the desired language and confirm with OK . The flag behind the word Language J serves as a guide when an unfamiliar language is selected. Select the respective menu with a flag until the submen ...
-
Miele G 5910 - page 49
Water hardness Your dishwasher is fitted with a water softener which you need to program to the water hardness level in your area, see "Before the first use". ^ Turn the dishwasher on K . If the memory function is on, the program menu instead of the last selected program will be displayed (see "Settings - Memory"). If this is th ...
-
Miele G 5910 - page 50
Water hardness Your dishwasher is fitted with a water softener which you need to program to the water hardness level in your area, see "Before the first use". ^ Turn the dishwasher on K . If the memory function is on, the program menu instead of the last selected program will be displayed (see "Settings - Memory"). If this is th ...
-
Miele G 5910 - page 51
Rinse aid For best results the rinse aid dosage can be adjusted. The dosage can be set between 0 and 6 ml. The dosage set by default to 3 ml of rinse aid per program. – Use a higher setting if spots appear on dry glassware. – Use a lower setting if streaking appears on dishes or glasses. ^ Selected the desired rinse aid amount and confirm with ...
-
Miele G 5910 - page 52
Optimize standby A few minutes after the last key is pressed or at the end of the program the dishwasher will switch into Standby mode to save energy. This function can also be turned off. The dishwasher will then turn off completely after 6 hours. ^ Select the desired setting and confirm with OK . If the Standby option is turned on, the clock will ...
-
Miele G 5910 - page 53
Reorganize programs The order of the programs in the program list can be reorganized. The two most frequently used programs can be saved to the first three positions. Select program for position 1 12:00 [ [ [ $ Sensor Wash ( # Express m ! Cancel Continue ! ^ Select the program you would like to assign to the first position. ^ Confirm with Con ...
-
Miele G 5910 - page 54
Save options Additional options can be selected for some programs, e.g. extended drying. See "Use - Selecting options". Save options allows you to save the selected options for future use of the program. This function is turned off by default. ^ Select the desired setting and confirm with OK . Settings ! 54 ...
-
Miele G 5910 - page 55
Child Safety Lock The Child Safety Lock protects the dishwasher from misuse. If the dishwasher is turned on while the Child Safety Lock is activated, the display shows The appliance is locked . The lock must be deactivated before the dishwasher can be used. As long as the Child Safety Lock is activated, the dishwasher is locked every time it is tur ...
-
Miele G 5910 - page 56
Temperature The temperature can be displayed in "°C/Celsius" or "°F/Fahrenheit". The temperatures are shown in °C/Celsius by default. ^ Select the desired temperature unit and confirm with OK . Volume When the buzzer is activated, a tone sounds at the end of a program and if a fault occurs. Buzzer at the end of a program The ...
-
Miele G 5910 - page 57
Brightness The display brightness can be adjusted in 7 levels. ^ Select the desired brightness and confirm with OK . Contrast The display contrast can be adjusted in 7 levels. ^ Select the desired contrast and confirm with OK . Memory The memory function allows you to save the last selected program. When turning the dishwasher off and on again afte ...
-
Miele G 5910 - page 58
Showroom program Demo modes are only for showrooms. The dishwasher has various demo programs for showrooms. The programs "Demo mode" and "Endless demo mode" show the use and function range of the dishwasher. – Demo mode : The program is started by pressing any button. It runs once and must be started again. – Endless demo mo ...
-
Miele G 5910 - page 59
Miele's RemoteVision Wi-Fi technology creates a 'virtual link' between your appliance and our monitoring center. If a fault occurs, Miele's client service center will be notified and contact you, or another trusted individual identified on your call roster, in order to gain access to your appliance to fix the problem. For inform ...
-
Miele G 5910 - page 60
With the aid of the following guide, minor problems can be fixed without a service call. , Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage. Technical faults Problem Possible fault Solution After the dishw ...
-
Miele G 5910 - page 61
Problem Possible fault Solution The buzzer sounds. The display shows the following: Before trying to remedy the fault: – Open the door. – Turn the dishwasher off with the K button. Technical fault FXX Contact Technical Ser - vice There may be a technical fault. – After a few seconds: – Turn the dishwasher on. – Select the desired program. ...
-
Miele G 5910 - page 62
Problems water intake/drain Problem Possible fault Solution The buzzer sounds. The display shows the following: No water intake Open the water faucet The water supply is closed. Open the water supply all the way. Fault water intake F12/13 Before fixing the fault: – Turn the dishwasher off by touching the s control. Fault F12/F13: Fault in the wat ...
-
Miele G 5910 - page 63
Problem Possible fault Solution In the program "Energy Saver" the following fault is displayed: Water intake temp. too low The intake water does not have a minimum temperature of 115°F (45°C). See "Plumbing". – Restart the program. – If the fault is displayed again, use a different program. The buzzer sounds. The display s ...
-
Miele G 5910 - page 64
General problems with the dishwasher Problem Possible fault Solution The display is dark. The dishwasher has gone into "Standby" mode to save energy. Turn the dishwasher off using the K button. The interior lighting is not turned on when the door is opened. The interior light was turned off. Turn the interior light on (see "Additiona ...
-
Miele G 5910 - page 65
Problem Possible fault Solution Detergent is left in the dispenser at the end of a program. The dispenser was damp when detergent was added. Dry the dispenser before adding detergent. The detergent lid cannot be closed properly. Detergent residue is blocking the catch. Remove the residue. The door and the interior walls are still wet after a progra ...
-
Miele G 5910 - page 66
Sounds Problem Possible fault Solution There is a knocking noise in the wash cabinet The spray arm is hitting an item in the basket. Interrupt the program, rearrange items blocking the spray arms. There is a rattling noise in the wash cabinet Items are not secure in the wash cabinet. Interrupt the program, and rearrange loose pieces. A foreign obje ...
-
Miele G 5910 - page 67
Poor cleaning results Problem Possible fault Solution The dishes are not clean. The dishes were not loaded correctly. See "Loading the dishwasher". The program was not powerful enough. Select a more intensive program (see "Program Guide"). Not enough detergent was dispensed. Use more detergent, or change the detergent. The spray ...
-
Miele G 5910 - page 68
Problem Possible fault Solution Dishes are not dry, glasses and cutlery are spotted. The rinse aid setting may be too low, or the rinse aid reservoir is empty. Increase the dosage, refill the reservoir or switch the rinse aid product when refilling (see "Rinse aid"). Dishes were taken out too soon. Leave dishes in longer (see "Use&qu ...
-
Miele G 5910 - page 69
Problem Possible fault Solution Glasses have a brown or blue discoloration; film cannot be wiped off. Detergent deposits. Change detergent right away. Glasses are dull and discolored; film cannot be wiped off. Glasses are not dishwasher safe. The surface is affected. There is no remedy. Only use dishwasher safe glasses. Tea or lipstick stains have ...
-
Miele G 5910 - page 70
Repairs In the event of a fault which you cannot correct yourself please contact the Miele Service Department at the phone number on the back of this booklet. ^ Please quote the model type and number of your appliance. These can be found on the data plate along the right edge of the door. PC Update The Program Correction (PC) allows a technician to ...
-
Miele G 5910 - page 71
To transport the dishwasher, e.g. when moving to a new home, note the following: – Empty the dishwasher. – Secure any loose parts, e.g. hoses, cables, cutlery baskets. – Transport the dishwasher in the upright position. If unavoidable it may be transported on its back. Do not transport it on its side or on the door. Residual water in the mach ...
-
Miele G 5910 - page 72
72 ...
-
Miele G 5910 - page 73
User Maintenance Instructions To prevent accidents and machine damage, read these instructions before installation or use. ...
-
Miele G 5910 - page 74
Check and clean your dishwasher regularly. This will help avoid problems and faults. , Abrasive cleaning agents, all-purpose cleaners, thinner or ammonia based cleaners should not be used on the dishwasher. They will damage the surface. Wash cabinet Generally, the wash cabinet is self cleaning if the correct amount of detergent is used. The wash ca ...
-
Miele G 5910 - page 75
Triple filter system The triple filter system in the base of the wash cabinet prevents food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects (e.g. broken glass, bones, etc.). During normal use, the filter system is self-cleaning. , The machine must not be used without all the filters in p ...
-
Miele G 5910 - page 76
To clean the underside of the filter the flap must be opened. ^ Push the clips together a and open the flap b . ^ Rinse under running water. ^ Close the flap so that the clip engages. ^ Return the filter so it lies flat in the base of the wash cabinet. ^ Lock the filter by turning the handle clockwise. , The triple filter system must be inserted an ...
-
Miele G 5910 - page 77
Cleaning the spray arms Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months. ^ Turn off the dishwasher before cleaning. Removing the spray arms ^ Remove the cutlery tray (if present). ^ Push the upper spray arm up to engage the inner ratchet and unscrew the spray arm. ^ Lift ...
-
Miele G 5910 - page 78
Cleaning the drain pump and non-return valve If the dishwasher is not completely drained at the end of a program, the drain pump or non-return valve may be blocked. ^ Turn off the dishwasher and pull the plug. ^ Remove the triple filter (see "Triple filter system"). ^ Use a cup or bowl to scoop water out of the wash cabinet. ^ Tilt the lo ...
-
Miele G 5910 - page 79
Installation Instructions Please refer to the Installation Diagram supplied with these instructions. Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. ...
-
Miele G 5910 - page 80
Disposal of the packing material The cardboard box and packaging protect the appliance during shipping. These materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of an old machine Old appliances may cont ...
-
Miele G 5910 - page 81
, Installation, repairs and other work by unqualified persons could be dangerous. Check that the voltage, frequency and fuse rating shown on the data plate match the household mains supply. The power outlet must be accessible after installation. Do not use an extension cord to connect the dishwasher to the mains. Danger of overheating! See data pla ...
-
Miele G 5910 - page 82
Hardwired electrical connection It is possible to hardwire this appliance to an existing power cable. , CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician ...
-
Miele G 5910 - page 83
Connection to the water supply , Installation, repairs and other work by unqualified persons could be dangerous. , Do not drink water from the dishwasher! – The dishwasher can heat its own water to the temperature required by the wash program. This allows for connection of the machine to either a hot (max. 140°F / 60°C) or cold water source. Fo ...
-
Miele G 5910 - page 84
Drainage – The machine comes equipped with a built-in non-return valve on the discharge side to prevent waste water from flowing back into the dishwasher. – The dishwasher is equipped with a 5 ft (1.5 m) flexible drain hose with an internal diameter of 7/8" (22 mm). – Drain hose extensions and adapters can be ordered from Miele. The maxi ...
-
Miele G 5910 - page 85
General requirements for measuring noise The dishwasher must be loaded with 16 place settings and the Normal program must be used. Installation requirements for measuring noise The dishwasher must be installed as follows:. ^ Install the dishwasher into an appropriate housing unit. ^ Secure the front panel. Noise measurement 85 ...
-
Miele G 5910 - page 86
^ Push the insulation mat supplied (depending on model) under the plinth until it is up against the appliance feet a . ^ Attach the toe-kick so that it is flush with the door front b . Noise measurement 86 ...
-
Miele G 5910 - page 87
87 ...
-
Miele G 5910 - page 88
M.-Nr. 07 909 211 / 02 9 Independence Way Princeton, NJ 08540 Phone: Fax: www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial number of your appliance available before contacting Technical Service. Canada Importer Miele Limited Headquarters and Miele Centre 800-843-7231 609-419-9898 609-419-4298 Technical Serv ...
Do you have a question concerning Miele G 5910?
Use the form below
If you did not solve your problem by using a manual Miele G 5910, ask a question using the form below. If a user had a similar problem with Miele G 5910 it is likely that he will want to share the way to solve it.