English dropdown-ico

Manual Renesas SH7085

48 pages 0.42 mb
Download

Go to site of 48

Summary
  • Renesas SH7085 - page 1

    Revision Date: Feb. 26, 2007 Renesas Microcomputer Deve lopment Environment System SuperH ™ Family / SH7080 Series R0E570850CFK00 Rev.4.00 SH7085 Group PLQP014 4KA-A User System Interface Boa rd User’s Manual REJ10J1205-0400 ...

  • Renesas SH7085 - page 2

    ...

  • Renesas SH7085 - page 3

    1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any ...

  • Renesas SH7085 - page 4

    ...

  • Renesas SH7085 - page 5

    I IMPORTANT INFORMATION READ FIRST • READ this user's manual befo re using this emulato r product. • KEEP the user's manual handy for future reference. Do not at tempt to use t he emulator pro duct until you fully understand its mechanism. Emulator Pr oduct: Throughout this document , the term "emulator product" shall be def ...

  • Renesas SH7085 - page 6

    II Target User of the Emulator Pr oduct: This emulator product should only be us ed by those who have carefull y read and thoroughly understood the informat ion and restrict ions containe d i n the user's manual. Do not attempt to us e the emulator product until you fu lly understand its mechanism. It is highl y recommended that first-t ime us ...

  • Renesas SH7085 - page 7

    III LIMITED WARRANTY Renesas warrants its emulator products to be manufactured in accordance with published specifica tions and free from defects in material and/or workmanship. Rene sas, at its option, will replace any emulator products returned intact to the factory, transportation charges prepaid, which Renesas, upon inspection, shall determine ...

  • Renesas SH7085 - page 8

    IV State Law : Some states do n ot allow the exclu sion or limitatio n of implied warranties or liability for incidental or consequent ial damages, so t he a bove limitati on or exclusion may not appl y to you. This warranty gi ves you specific l egal rights, a nd you may have other rights whi ch may vary from state to state. The Warranty is Vo id ...

  • Renesas SH7085 - page 9

    V SAFETY PAGE READ FIRST • READ this user's manual befo re using this emulato r product. • KEEP the user's manual handy for future reference. Do not at tempt to use t he emulator pro duct until you fully understand its mechanism. DEFINITI ON OF SIGNAL WORDS Either in the user's manual or on the produc t, several icons are used to ...

  • Renesas SH7085 - page 10

    VI means WARNING or CAUTIO N. Example: CAUTION AG AINST AN ELECT RIC SHOCK means PROHIBITIO N. Example: DISASSEMBLY PROHIBIT ED means A FORCIBLE ACT ION. Example: UNPLUG T HE POWER CABLE F ROM THE R ECEPTACLE. ...

  • Renesas SH7085 - page 11

    VII W ARNING Warnings for AC Power Supply: • If the att ached AC power cable does not fit the receptacle, do not alter the AC power cable and do not plug it forcibly. Failure to comply may cause electric shock and/or fire. • Use an AC power cable which complies with the safety standard of the country. • Do not touch the plug of the AC power c ...

  • Renesas SH7085 - page 12

    VIII W ARNING • If you smell a strange odor, hear an unusual sound, or see smoke coming from this product, then disconnect power immediately by unplugging the AC power cable from the outlet. D o not use this as it is because of the danger of electric shock and/or fire. In this case, contact your local distributor. • When installing or connecti ...

  • Renesas SH7085 - page 13

    IX CA UTION Cautions for AC Adapte r: • Use only the AC adapter included in this product package. • The included AC adapter is for this emulator. Do not use it for other product. • The DC plug on the included AC adapter has the below polarity. • The included AC adapter has no power supply switch. The AC adapter is always act ive while conne ...

  • Renesas SH7085 - page 14

    X W ARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Do not repair or rem odel the emulator product by yourself for electric shock prevent ion and quality assurance. 2. Always switch ...

  • Renesas SH7085 - page 15

    i Preface The R0E570850CFK00 is a user system interface boa rd that connects a user system for the SH7085 PLQP 0144KA-A (former code: FP -144LV) package to the SH7080 E200F emulator (R0E0200F1EMU00 or R0E570800VKK00). ...

  • Renesas SH7085 - page 16

    ii ...

  • Renesas SH7085 - page 17

    iii Contents Section 1 Configuration .....................................................................................1 Section 2 Environmental Conditions .................................................................3 Section 3 User In terface Speci fications .............................................................5 Section 4 Connectio ...

  • Renesas SH7085 - page 18

    iv ...

  • Renesas SH7085 - page 19

    1 Section 1 Configuration Figure 1 and table 1 show the conf iguration and component s of the user syst em interface board for the PLQP0144KA-A (former code: FP-144LV) package. Pleas e make sure you have all of these components when unpacking. Board Screws (M2.0 x 10 mm) Spacer IC socket User system Screws (M2.0 x 6 mm) Socket cover EV-chip unit Fi ...

  • Renesas SH7085 - page 20

    2 CA UTION Use a NQPACK 144SD-ND socket (manufactured by Tokyo Eletech Corporation) and a HQPACK144SD (manuf actured by Tokyo Eletech Corporation) for the PLQP0144KA- A (former code: FP-144LV) package IC socket and socket cover, respectively, on the user system. Table 1 R0E570850CFK00 Com ponents No. Component Quantity Remarks 1 Board 1 With four s ...

  • Renesas SH7085 - page 21

    3 Section 2 Environmental Conditions Maintain the condit ions in table 2 w hen using the emulator. Table 2 Environmenta l Conditions Item Specifications Temperature Operating: +10 to +35°C Storage: -10 to +35°C Humidity Operating: 35 to 80% RH, no condensation Storage: 35 to 80% RH, no condensation Vibration Operating: 2.45 m/s 2 max. Storage: 4. ...

  • Renesas SH7085 - page 22

    4 ...

  • Renesas SH7085 - page 23

    5 Section 3 User Interface Specifications This user syst em interface board has the function th at masks the chip select signals (C S0 to CS7), bus request si gnal (BREQ), and wait input si gna l (WAIT) depending on the setting of a switch. To use the mask function, set switches (SW1 to SW3) on the user sys tem interface board (figure 2), according ...

  • Renesas SH7085 - page 24

    6 Table 3 Setting a Switch (SW1) Switch Setting SW1 No. PLQP0144KA-A (Former Code: FP-144LV) Socket Pin No. Signal Name On Off 1 54 PA6/_CS2/TCLKA Mask canceled Mask enabled 2 53 PA7/_CS3/TCLKB Mask canceled Mask enabled 3 50 PA10/_CS0/_POE4 Mask canceled Mask enabled 4 49 PA11/_CS1/_POE5 Mask canceled Mask enabled 5 33 PA18/_BREQ/TEND 0 Mask cance ...

  • Renesas SH7085 - page 25

    7 Table 5 Setting a Switch (SW3) Switch Setting SW2 No. PLQP0144KA-A (Former Code: FP-144LV) Socket Pin No. Signal Name On Off 1 101 PA17/_WAIT/DACK2 Mask canceled Mask enabled 2 4 PA21/_CS5/_CE1A/_CASU/TIC 5U Mask canceled Mask enabled 3 115 PE5/_CS6/_CE1B/TIOC 1B/TXD3 Mask canceled Mask enabled 4 116 PE6/_CS7/TIOC2A/SC K3 Mask canceled Mask enabl ...

  • Renesas SH7085 - page 26

    8 Figure 3 shows a circuit for masking si gna ls on the user syst em interface board. UVCC PB7 PB8 PD28 PD29 P A18 P A17 PA 1 P A11 PE6 PA 7 PE5 PA 0 P A10 P A20 PA 6 P A21 SW1 SW2 SW3 User system Emulator PB7_C PB8_C PD28_C PD29_C P A18_C P A17_C P A1_C P A11_C PE6_C P A7_C PE5_C P A0_C P A10_C P A20_C P A6_C P A21_C Figure 3 Circui t for Maskin g ...

  • Renesas SH7085 - page 27

    9 Section 4 Connection Procedures 4.1 Connecting User System Int erface Board to User System W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE BOARD is connect ed to or removed from any part. B efore connect ing, make sure that pin 1 on both sides are correct ly aligned. Failure to do so will resu ...

  • Renesas SH7085 - page 28

    10 4.1.2 Installing Ca ble Head CA UTION Check the location of pin 1 before inserting. If the IC socket is not conn ected properly, the power-supply pins will be shorted as shown below. 180˚ rotation 55 (Vss) 127 (AVref) Align pin 1 on the IC socket for a PLQP 0144KA-A (FP-144LV ) package on the user syst em with pin 1 on the user system interface ...

  • Renesas SH7085 - page 29

    11 Fasten the user s ystem interface board to the IC socket for a PLQP 0144KA-A (FP-144LV) package on the user system w i th the four screws (M2.0 x 10 mm) provi ded. Each screw shoul d be tightened a little at a time, alte rnating between screws on oppos ing corners. Take special care, such as manually securing the IC s ocket soldered area, to pre ...

  • Renesas SH7085 - page 30

    12 4.2 Connecting User System Interf ace Board to EV-Chip Board W ARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Always switch OFF t he user system and the emulat or product before ...

  • Renesas SH7085 - page 31

    13 Board Spacer User system EV-chip unit Connector No. User I/F Connector 1 (CN4) EV-Chip Unit Connector No. Board Connector No. UCN1 UCN2 User I/F Connector 2 (CN5) Figure 5 Connecting User System Interface Board to EV-Chip Board ...

  • Renesas SH7085 - page 32

    14 4.3 Recommended Dimensions for Us er System Mount Pad (Footprint) Figure 6 shows the recommended dimensions for the mount pad (footprint ) for the user syst em with an IC s ocket for a PLQP0144KA-A (former code: FP-144LV) package (NQPACK 144SD-ND: manufactured by Tokyo El etech Corporation). N ote that the dimens ions in figure 6 are somewhat di ...

  • Renesas SH7085 - page 33

    15 4.4 Dimensions for External Bus Tr ace Unit, Emulation Memory Unit, EV-Chip Unit, and User S ystem Interface Board The dimensions for the external bus trace unit, em ulation memory unit, EV-c hip unit, and the us er system interface board are shown in figure 7. ...

  • Renesas SH7085 - page 34

    16 125.0 90.0 90.0 45.0 5.0 125.0 90.0 110.0 20.0 30.0 60.0 5.0 125.0 90.0 Unit: mm Tolerance: ±0.5 mm External bus trace unit Board Spacer EV-chip unit Pin 1 Emulation memory unit Figure 7 Dimensions for External Bus Tra ce Unit, Emulation Memory Unit, EV-Chip Unit, and User System Interface Board ...

  • Renesas SH7085 - page 35

    17 4.5 Resulting Dimensions after Conn ecting User System Interface Board The resulting dimensions, after conn ecting the us er system interface board to the user s ystem, are shown in figures 8, 9, and 10. 24.5 55.0 12.5 68.4 30.0 37.5 27.5 29.2 24.5 39.19 39.19 24.5 IC socket (NQPACK144SD-ND manufactured by Tokyo Eletech Corporation) User system ...

  • Renesas SH7085 - page 36

    18 24.5 39.19 39.19 24.5 42.1 12.5 55.5 30.0 37.5 27.5 29.2 24.5 IC socket (NQPACK144SD-ND manufactured by Tokyo Eletech Corporation) User system Spacer ( φ 6.0) Unit: mm Tolerance: ±1.0 mm Pin 1 Top view External bus trace unit EV-chip unit Figure 9 Resu lting Dim ensions after Co nnecting User System Interface Board (when Connecting External Bu ...

  • Renesas SH7085 - page 37

    19 24.5 29.2 12.5 42.6 30.0 37.5 27.5 EV-chip unit Spacer ( φ 6.0) IC socket (NQPACK144SD-ND manufactured by Tokyo Eletech Corporation) User system Unit: mm Tolerance: ±1.0 mm 24.5 39.19 39.19 24.5 Pin 1 Top view Figure 10 Resu lting Dim ensions after Co nnecting User System Interface Board (when Connecting EV-Chip Unit ) ...

  • Renesas SH7085 - page 38

    20 ...

  • Renesas SH7085 - page 39

    21 Section 5 Installing the MCU to the User System CA UTION 1. Check t he location of pin 1 before insert ing. 2. Use a Philips-type screwdr iver whose head matches the screw head. 3. The tightening t orque must be 0.054 N•m or less. If the applied torque ca nnot be accurately measured, stop tightening when the f orce required to turn th e screw ...

  • Renesas SH7085 - page 40

    22 MCU (SH7085) Screws (M2.0 x 6 mm) Socket cover Pin 1 User system IC socket (NQPACK144SD-ND manufactured by Tokyo Eletech Corporation) Figure 11 Insta lling MCU to User Syst em ...

  • Renesas SH7085 - page 41

    23 Section 6 Verifying Operation 1. Turn on the emulator according to the pro cedures described in the SH -2A, SH-2 E200F Emulator User' s Manual (R0E0200F1EMU 00E or R0E570800EMU00E)). 2. The emulator connected to this user syst em interface board supports three kinds of clock sources as t he MCU clock. For detail s, refer to the SH7080 E200F ...

  • Renesas SH7085 - page 42

    24 ...

  • Renesas SH7085 - page 43

    25 Section 7 Notice 1. Before connecting any part s or cables, make s ure that pin 1 on the both si des are correctly aligned. 2. Do not apply excessive force to the us er syst em interface board while it is connected to the user sy stem. 3. The dimensions of the recommended mount pad for the IC s ocket for this user s ystem interface board are dif ...

  • Renesas SH7085 - page 44

    26 ...

  • Renesas SH7085 - page 45

    SH7085 Group PLQP0144KA-A User System Interface Board User's Manual Publication Date: Rev. 1.00, December 14, 2004 Rev. 4.00, February 26, 2007 Published by: Sales Strategic Planning Div. Renesas Technology Corp. Edited by: Customer Support Department Global Strategic Communication Div. Renesas Solutions Corp. © 2007. Renesas Technology Corp. ...

  • Renesas SH7085 - page 46

    Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to " http://www.renesas.com/en/network " for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) ...

  • Renesas SH7085 - page 47

    ...

  • Renesas SH7085 - page 48

    SH7085 Group PLQP0144KA- A User System Interface Board User’s Manual ...

Manufacturer Renesas Category Computer Hardware

Documents that we receive from a manufacturer of a Renesas SH7085 can be divided into several groups. They are, among others:
- Renesas technical drawings
- SH7085 manuals
- Renesas product data sheets
- information booklets
- or energy labels Renesas SH7085
All of them are important, but the most important information from the point of view of use of the device are in the user manual Renesas SH7085.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Renesas SH7085, service manual, brief instructions and user manuals Renesas SH7085. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Renesas SH7085.

Similar manuals

A complete manual for the device Renesas SH7085, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Renesas SH7085 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Renesas SH7085.

A complete Renesas manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Renesas SH7085 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Renesas SH7085, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Renesas SH7085, that we can find in the current document
3. Tips how to use the basic functions of the device Renesas SH7085 - which should help us in our first steps of using Renesas SH7085
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Renesas SH7085
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Renesas SH7085 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Renesas SH7085?

Use the form below

If you did not solve your problem by using a manual Renesas SH7085, ask a question using the form below. If a user had a similar problem with Renesas SH7085 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)