English dropdown-ico

Manual Graco Inc. GC-1402

20 pages 3 mb
Download

Go to site of 20

Summary
  • Graco Inc. GC-1402 - page 1

    Operation Formula-X Chop GC-1402F ENG Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. Low emission external-mix dispense gun for use with polyester resin and gel coat. For professional use only . Maximum fluid working pressure: 2000 psi (14 MP a, 138 bar) Maximum air pressure: 100 psi (0.7 M ...

  • Graco Inc. GC-1402 - page 2

    2 GC-1402E Contents W arnings .......................................................... 3 Important Safety Information ......................... 5 Grounding .............................................. .......... 6 Set-Up ............................................................... 7 P arts .................................................... ...

  • Graco Inc. GC-1402 - page 3

    3 GC-1402E W arnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbol refers to procedure- specic risk. Refer back to these warnings. Additional, product-specic warnings may be found throughout the body of thi ...

  • Graco Inc. GC-1402 - page 4

    4 GC-1402E W ARNING SKIN INJECTION HAZARD High-pressure uid from gun, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment. • Do not point gun at anyone or at any part of the body . • Do not put your hand over the dispens ...

  • Graco Inc. GC-1402 - page 5

    5 GC-1402E Important Safety Information Methyl Ethyl Ketone Peroxide (MEKP) MEKP is among the more hazardous materials found in commercial channels. Proper handling of the “unstable (reactive)” chemicals presents a denite challenge to the plastics industry . The highly reactive property which makes MEKP valuable to the plastics industry in p ...

  • Graco Inc. GC-1402 - page 6

    6 GC-1402E This equipment needs to be grounded. Ground the dispense gun through connection to a GlasCraft approved grounded uid supply hose. Check your local electrical code and related manuals for detailed grounding instructions of all equipment in the work area. A grounding wire and clamp are provided, assembly p/n 17440-00 with all FRP equipm ...

  • Graco Inc. GC-1402 - page 7

    7 GC-1402E Hose Attachment 1. Push in and rotate the trigger lock to stop the trigger from being activated. 2. Attach the (black p/n 21694-25) material hose to the material inlet tting on the back of the gun. 3. Attach the (red) atomize air tubing to the atomize air inlet tting on the back of the gun. 4. Attach the (stainless steel p/n 20190- ...

  • Graco Inc. GC-1402 - page 8

    8 GC-1402E Repair Kits Part Number Description 23792-00 GUN AIR KIT 23793-00 GUN SEAL KIT 23732-00 GUN FLUID V AL VE KIT Standard Equipment Part Number Description 23750-03 FORMULA X CHOP DISPENSE GUN GC-1402 USER MANUAL Formula X Chop Dispense Gun 23750-03 P arts ...

  • Graco Inc. GC-1402 - page 9

    9 GC -1402E REVISION C 23750-03 Formula X Chop Dispense Gun Assembly Drawings ...

  • Graco Inc. GC-1402 - page 10

    10 GC-1402E REVISION C 23750-03 Formula X Chop Dispense Gun Assembly Drawings 189018 ...

  • Graco Inc. GC-1402 - page 11

    11 GC-1402E REVISION C Part Number Description Qty . 10773-28C SCREW 1 13867-05 O-RING 1 13867-07 O-RING 3 15845-01 5/32in. BALL DRIVER 1 18383-02 1/4in. DIA. SST BALL 1 1880-00 FITTING 1 20514-00 FITTING 1 20585-01 CA T AL YST RING 1 20586-00 NOZZLE SEAL 1 20588-00 RET AINING SEAL 1 20735-05 ELBOW FITTING 2 20796-00 FITTING 1 21044-05 O-RING 5 214 ...

  • Graco Inc. GC-1402 - page 12

    12 GC-1402E T o relieve uid and air pressures: 1. Push down Y ellow slide valve, P/N 21402-00 to bleed off air to system. 2. Open P/N 21228-00 on catalyst pump to recirculation position. 3. Open P/N 21 192-00 on bottom of material pump. 4. V erify the trigger lock is engaged. Daily Maintenance It is recommended that the following service be per- ...

  • Graco Inc. GC-1402 - page 13

    13 GC-1402E Parts Replacement Procedure Formula X Chop Gun Before performing maintenance on the dispense gun, follow Pressure Relief Procedure. Due to the different o-ring materials and lubricants used in the dispense guns, never submerge or soak any dis - pense gun in any type of solvent. Submerging or soak - ing any dispense gun will immediately ...

  • Graco Inc. GC-1402 - page 14

    14 GC-1402E 4. Place PTFE washers, p/n: 23721-04 on top and bottom of uid valve, p/n: 23743-00. 1. Ensure bores are clean before building material valves. 2. Insert bearing, p/n: 23768-01 into gun body . 3. Insert seal, p/n: 23763-00 into gun body . (Ensure holes in seal are aligned with holes in gun body .) 5. Lubricate outside of uid valve, ...

  • Graco Inc. GC-1402 - page 15

    15 GC-1402E Dispense T ip Reference Chart Part Number Orice 23047-J1 .012 J2 .014 J3 .022 M1 .012 M2 .014 M3 .022 N1 .012 N2 .014 N3 .022 P1 .012 P2 .014 P3 .022 Note: Use p/n: LP A2-120G and p/n: LP A2-121G when using LP A2-147-XXXX and 23047-XX series spray tips. Accessories ...

  • Graco Inc. GC-1402 - page 16

    16 GC-1402E Dispense T ip Reference Chart Part Number Orice LP A2-147-1525 0.015 1540 0.015 1550 0.015 1565 0.015 1825 0.018 1840 0.018 1850 0.018 1865 0.018 2125 0.021 2140 0.021 2150 0.021 2165 0.021 2325 0.023 2340 0.023 2350 0.023 2365 0.023 2625 0.026 2640 0.026 2650 0.026 2665 0.026 3125 0.031 3140 0.031 3150 0.031 3165 0.031 3625 0.036 36 ...

  • Graco Inc. GC-1402 - page 17

    17 GC-1402E Part Number Orice Min. Width (in.) Max. Width (in.) Min. Output (lbs.) Max Output (lbs.) 23005- C4 0.040 7 16.5 5.4 10.02 C5 0.050 8.5 15.5 6.36 12.23 C6 0.060 7 17 7.31 1 1.01 C7 0.070 7 13 8.53 10.58 C8 0.080 10 12.5 10.28 13.03 C9 0.090 7.5 10 1 1.49 12.36 E4 0.040 6 21 4.01 9.16 E5 0.050 11 21 5.71 10.23 E6 0.060 6.5 18.5 5.48 1 ...

  • Graco Inc. GC-1402 - page 18

    18 GC-1402E T echnical Data Category Data Maximum Fluid Working Pressure 2000 psi (14 MPa, 138 bar) Maximum Air Inlet Pressure 100 psi (0.7 MPa, 7 bar) T ypical Flow Rate of Pattern Guns Dependent of spray tip Maximum Fluid temperature 100° F (38° C) T rigger Air 1/4in. T ube AAC Air 1/4in. T ube Atomize Air 1/4in. T ube Air inlet size (Chopper) ...

  • Graco Inc. GC-1402 - page 19

    19 GC -1402E Notes ...

  • Graco Inc. GC-1402 - page 20

    Graco Ohio Standard W arranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a p ...

Manufacturer Graco Inc. Category Paint Sprayer

Documents that we receive from a manufacturer of a Graco Inc. GC-1402 can be divided into several groups. They are, among others:
- Graco Inc. technical drawings
- GC-1402 manuals
- Graco Inc. product data sheets
- information booklets
- or energy labels Graco Inc. GC-1402
All of them are important, but the most important information from the point of view of use of the device are in the user manual Graco Inc. GC-1402.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Graco Inc. GC-1402, service manual, brief instructions and user manuals Graco Inc. GC-1402. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Graco Inc. GC-1402.

Similar manuals

A complete manual for the device Graco Inc. GC-1402, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Graco Inc. GC-1402 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Graco Inc. GC-1402.

A complete Graco Inc. manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Graco Inc. GC-1402 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Graco Inc. GC-1402, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Graco Inc. GC-1402, that we can find in the current document
3. Tips how to use the basic functions of the device Graco Inc. GC-1402 - which should help us in our first steps of using Graco Inc. GC-1402
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Graco Inc. GC-1402
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Graco Inc. GC-1402 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Graco Inc. GC-1402?

Use the form below

If you did not solve your problem by using a manual Graco Inc. GC-1402, ask a question using the form below. If a user had a similar problem with Graco Inc. GC-1402 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)