English dropdown-ico

Manual Miele DA5321W

36 pages 0.9 mb
Download

Go to site of 36

Summary
  • Miele DA5321W - page 1

    Operating and Installation Instructions Ventilation System DA 5321 W DA 5381 W DA 5391 W To prevent accidents and machine damage, read these instructions before installation or use. M.-Nr. 07 100 651 en - US, CA ...

  • Miele DA5321W - page 2

    IMPORTANT SAFETY INSTRUCTIONS Functional description Guide to the appliance Operation Turning on the fan .................................................1 0 Selecting the power level ............................................1 0 Delayed Shut Down ................................................1 2 Turning off the fan ............................ ...

  • Miele DA5321W - page 3

    Read these Operating Instructions carefully before installing or using the Ventilation System. This appliance is intended for residential use only. Use the appliance only for its intended purpose. The manufacturer cannot be held responsible for damages caused by improper use of the hood. This appliance complies with current safety requirements. Imp ...

  • Miele DA5321W - page 4

    ~ This equipment is not designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft. However, under certain conditions it may be possible for installation in these applications. Please contact the nearest Miele dealer or the Technical Service Department with specific requirements. ~ Before servicing or cle ...

  • Miele DA5321W - page 5

    , WARNING - TO REDUCE THE RISK OF A COOKTOP GREASE FIRE: ~ Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers may ignite. Heat oils slowly on low or medium settings. ~ Always turn the hood on when cooking at a high heat. ~ Clean ventilation fans frequently. Grease should not be allowed to accumulate ...

  • Miele DA5321W - page 6

    Installation ~ , WARNING To reduce the risk of fire only use metal ductwork. ~ Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: – 22" (550 mm) above electric cooktops, – 30" (762 mm) above gas cooktops, – 26" (650 mm) ab ...

  • Miele DA5321W - page 7

    The ventilation hood works by air extraction . The air is drawn in and cleaned by the grease filter and directed outside. The hood comes equipped with a non-return flap . This flap automatically closes when the hood is turned off so that no exchange of outside air and room air can occur. When the hood is turned on, the air pressure of the exhaust f ...

  • Miele DA5321W - page 8

    Guide to the appliance 8 ...

  • Miele DA5321W - page 9

    a Chimney extension b Chimney c Canopy d Grease filter e Control panel f Overhead lighting g Light button This button turns the light on and off and also dims the light. The lighting can be used independently from the fan. h On/Off button i Fan power selection Four fan speed selection j Delayed shut down This button activates the Delayed Shut Down ...

  • Miele DA5321W - page 10

    Turning on the fan ^ Press the On/Off button. Selecting the power level ^ Use the " – / + " controls to select the desired power level. + = increases the fan speed - = decreases the fan speed Level "1" to "3" (green indicators) are usually sufficient for normal cooking. Intensive setting Level "4" (yellow i ...

  • Miele DA5321W - page 11

    If the power level indicators flash the automatic switch back is not activated. ^ To activate the automatic switch press the " + " button. The power level indicators light. ^ To deactivate the automatic switch press the " – " button. ^ To save the setting press the Delay Shut down button. If the procedure is not saved within 4 ...

  • Miele DA5321W - page 12

    Delayed Shut Down If odors or smoke remain in the kitchen after cooking has been completed, the Delayed Shut Down feature can be selected to allow the hood to continue running for either 5 or 15 minutes. ^ Press the Delayed Shut Down button while the fan is still running. Press once = 5 minute delay (left indicator lights) Press twice = 15 minute d ...

  • Miele DA5321W - page 13

    Turning the lighting on/off The overhead lighting can be turned on and off independently from the fan. ^ Press the light button briefly to turn on the lighting. The light button indicator illuminates. ^ Press the light button briefly again to turn off the lighting. The light button indicator will go out. Dimming the lighting The brightness of the l ...

  • Miele DA5321W - page 14

    Filter timers A timer monitors the hours of fan operation. The indicator for the grease filter will light after 30 hours of operation. The grease filters must then be cleaned. After the grease filters have been cleaned and put in place, the grease filter timer must be reset. ^ To do this, press the grease filter button for about 3 seconds. The indi ...

  • Miele DA5321W - page 15

    Reprogramming the timers The grease filter timer is preset to 30 hours. This time can be lengthened or shortened to 20, 30, 40, or 50 hours. – A time of 20 hours should be programmed in kitchens with frequent pan or deep frying. – A time of 20 hours should also be programmed if the kitchen is only used occasionally to prevent grease which has a ...

  • Miele DA5321W - page 16

    Before cleaning or servicing the hood, disconnect it from the power supply by either removing the fuse, unplugging it from the outlet, or manually "tripping" the circuit breaker. Cleaning the casing Warning: Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the hood. They will damage the surface. ^ All e ...

  • Miele DA5321W - page 17

    Grease filters The reusable metal grease filters remove solid particles from the vented kitchen air (grease, dust, etc). The grease filters should be cleaned ever y3-4 weeks or when the grease filter indicator lights. A dirty filter is a fire hazard. ^ To remove the grease filters pull the locking clips, 1 , forward. Lower the filter 45°, 2 , unho ...

  • Miele DA5321W - page 18

    Changing the light bulb Before changing the light bulbs, disconnect the hood from the power supply by either removing the fuse, unplugging it, or manually "tripping" the circuit breaker. When in use halogen bulbs become extremely hot, use caution. Do not attempt to change the bulbs until they have had sufficient time to cool. Do not touch ...

  • Miele DA5321W - page 19

    Repairs In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department. ^ When contacting the Technical Service Department, please quote the model and serial number of your appliance. These are shown on the data plate which is visible when the grease filters are removed. MieleCare MieleCare , our ...

  • Miele DA5321W - page 20

    20 ...

  • Miele DA5321W - page 21

    Installation Instructions ...

  • Miele DA5321W - page 22

    22 ...

  • Miele DA5321W - page 23

    Disposal of packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. To prevent suffocation of children, ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of their reach. Disposal of an old appliance Old ...

  • Miele DA5321W - page 24

    Installation accessories 24 ...

  • Miele DA5321W - page 25

    a 3 protective shields to prevent scratches to the chimney during installation. b 2 hose clips for securing the ducting. c 1 reducing collar for use with 5" (125 mm) exhaust ducting. d Telescopic retaining plate secures the chimney extension Caution: During the installation process, please be careful of sharp edges. 8 large headed screw s5x4 0 ...

  • Miele DA5321W - page 26

    1) and 2) Installation area Wall/ceiling area respectively for vent hole and outlet installation. Vent hole 5 7 / 8 " (150 mm) with reducing collar 5" (125 mm). Appliance dimensions 26 ...

  • Miele DA5321W - page 27

    Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: - 22" (550 mm) above electric cooktops, - 30" (762 mm) above gas cooktops, - 26" (650 mm) above an open electr ...

  • Miele DA5321W - page 28

    Installation instructions ^ See the enclosed installation instruction sheet. ^ Please read the "Important Safety Instructions" and Installation instructions before installing this hood. Protective film The casing is covered with a protective film to prevent scratching during transport. ^ Peel off the film before installing the casing part ...

  • Miele DA5321W - page 29

    The majority of the weight of the installed ventilation system will be supported by the lower retaining plate. It must be firmly attached to the stud framing behind the drywall. If studs are not available in the required locations, a plywood backing (min. ½" (13 mm) thick) spanning at least two studs must be installed. Failure to adequately s ...

  • Miele DA5321W - page 30

    , WARNING Danger of toxic fumes. Gas cooking appliances release carbon monoxide that can be harmful or fatal if inhaled. The exhaust gases extracted by the hood should be vented outside of the building only. Do not terminate the exhaust ducts in attics, garages, crawlspaces, etc. To reduce the risk of fire, only use metal ductwork. Please read and ...

  • Miele DA5321W - page 31

    – If the exhaust is ducted into an inactive flue, the air must be expelled parallel to the flow direction of the flue. Never connect an exhaust hood to an active chimney, dryer vent, flue, or room venting ductwork. Seek professional advice before connecting an exhaust hood vent to an existing, inactive chimney or vent flue. Important If the ductw ...

  • Miele DA5321W - page 32

    All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work. Ensure that power to the appliance is off while installation or repair ...

  • Miele DA5321W - page 33

    Important (Canada only) To increase security before the machine is installed, it is recommended to install a protective switch (30 mA). Important (Canada only) The hood must be hard wired accordingly: Black/Red wire: .... connect to L1 (live) White wire: ..... connect to N (neutral) Green wire: . . connect to GND (ground) Maximum load D A5 3 8 1W/D ...

  • Miele DA5321W - page 34

    34 ...

  • Miele DA5321W - page 35

    35 ...

  • Miele DA5321W - page 36

    M.-Nr. 07 100 651 / 02 Alteration rights reserved / 4607 For most the updated manual see the Miele web site. ...

Manufacturer Miele Category Ventilation Hood

Documents that we receive from a manufacturer of a Miele DA5321W can be divided into several groups. They are, among others:
- Miele technical drawings
- DA5321W manuals
- Miele product data sheets
- information booklets
- or energy labels Miele DA5321W
All of them are important, but the most important information from the point of view of use of the device are in the user manual Miele DA5321W.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Miele DA5321W, service manual, brief instructions and user manuals Miele DA5321W. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Miele DA5321W.

Similar manuals

A complete manual for the device Miele DA5321W, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Miele DA5321W by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Miele DA5321W.

A complete Miele manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Miele DA5321W - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Miele DA5321W, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Miele DA5321W, that we can find in the current document
3. Tips how to use the basic functions of the device Miele DA5321W - which should help us in our first steps of using Miele DA5321W
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Miele DA5321W
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Miele DA5321W in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Miele DA5321W?

Use the form below

If you did not solve your problem by using a manual Miele DA5321W, ask a question using the form below. If a user had a similar problem with Miele DA5321W it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)