English dropdown-ico

Manual Icom IC-F24/S

21 pages 0.81 mb
Download

Go to site of 21

Summary
  • Icom IC-F24/S - page 1

    INSTRUCTION MANUAL This device complies with Part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interfer- ence. UHF TRANSCEIVER iF24/S VHF TRANSCEIVER iF14/S IC-F14_F24-2.qxd 04.7.22 0:57 PM Page A (1,1) ...

  • Icom IC-F24/S - page 2

    i ii SAFETY TRAINING INFORMA TION Y our Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and clas- sified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such haz- ards. This radio is NOT intended ...

  • Icom IC-F24/S - page 3

    iv iii FOREWORD READ ALL INSTRUCTIONS carefully and completely before using the transceiver . SA VE THIS INSTRUCTION MANUAL— This instruction manual contains important operating instructions for the IC-F14/ F14S VHF TRANSCEIVER and IC-F24/F24S UHF TRANSCEIVER . EXPLICIT DEFINITIONS OPERA TING NOTES • When transmitting with a portable radio, hol ...

  • Icom IC-F24/S - page 4

    1 1 ACCESSORIES 1 v ■ Supplied accessories The following accessories are supplied: Qty . q Flexible antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 w Battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 e Belt clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Icom IC-F24/S - page 5

    3 1 ACCESSORIES 1 2 1 ACCESSORIES ■ Accessory attachments D Flexible antenna Connect the supplied flexible an- tenna to the antenna connector . CAUTION: • NEVER HOLD by the antenna when carrying the transceiver . • T ransmitting without an antenna may damage the transceiver . ï Battery pack T o attach the battery pack: Slide the battery pack ...

  • Icom IC-F24/S - page 6

    4 1 ACCESSORIES 5 1 ACCESSORIES 1 ï Jack cover Attach the jack cover when the optional speaker-microphone is not used. w w q q q w T o attach the jack cover: q Attach the jack cover to the [SP MIC] connector . w T ighten the screws. T o detach the jack cover: q Unscrew the screws with a phillips screwdriver . w Detach the jack cover for the speake ...

  • Icom IC-F24/S - page 7

    7 2 P ANEL DESCRIPTION 2 6 2 P ANEL DESCRIPTION ■ Front, top and side panels q CHANNEL SW/SELECTOR • IC-F14S/F24S: T oggle the channel switch to select the pre-pro- grammed channel 1 or 2. • IC-F14/F24 : Rotate the channel selector to select the pre- programmed memory channels. w VOLUME CONTROL [VOL] Rotate to turn the power ON/OFF and adjust ...

  • Icom IC-F24/S - page 8

    9 2 P ANEL DESCRIPTION 2 8 2 P ANEL DESCRIPTION ‘ ‘ LED indicator The LED indicator indicates several informa- tion as follows; (Ref.; R=Red, G=Green, O=Orange) R R R R O O O O G G G G G G R O R O R O R O R O R O R O R O G G G R • TX: T urns Red while transmitting a signal. • RX: T urns Green while receiving a signal. • Call LED (ON): Whe ...

  • Icom IC-F24/S - page 9

    10 2 P ANEL DESCRIPTION 11 2 P ANEL DESCRIPTION 2 MONITOR KEY ➥ Mute and release the CTCSS (DTCS) or 2-tone squelch mute. Open any squelch/deactivate any mute while pushing this key . (LMR operation only) ➥ Activates one of (or two of) the following functions on each chan- nel independently: (PMR operation only) • Push and hold to un-mute the ...

  • Icom IC-F24/S - page 10

    13 3 CONVENTIONAL OPERA TION 3 12 3 CONVENTIONAL OPERA TION ■ T urning power ON ➥ Rotate [VOL] to turn power ON. ■ Channel selection IC-F14S/F24S: T oggle [CHANNEL SWITCH] to select the channel 1 or 2, or , push one of [MR- CH 1] to [MR-CH 4] key to select a chan- nel directly . • The memory channels 3 and 4 are avail- able when [MR-CH 3] a ...

  • Icom IC-F24/S - page 11

    15 3 CONVENTIONAL OPERA TION 3 14 3 CONVENTIONAL OPERA TION ■ Receiving and transmitting NOTE: T ransmitting without an antenna may damage the trans- ceiver . See p. 2 for antenna attachment. Receiving: q Rotate [VOL] to turn power ON. w T oggle [CHANNEL SWITCH] (IC-F14S/F24S), rotate [CHAN- NEL SELECTOR] (IC-F14/F24) or push one of [MR-CH 1] to ...

  • Icom IC-F24/S - page 12

    17 3 CONVENTIONAL OPERA TION 3 16 3 CONVENTIONAL OPERA TION ■ Scrambler function The optional voice scrambler units UT -109 (#01) and UT -1 10 (#01) provide high performance private communication between stations with the same scrambler codes. ➥ Push and hold [Scrambler] to turn the scrambler function ON. ➥ Push [Scrambler] to turn the scramb ...

  • Icom IC-F24/S - page 13

    19 4 OPTIONAL UNIT INST ALLA TION 4 18 4 OPTIONAL UNIT INST ALLA TION ■ Optional unit installation Install the optional unit as follows: q Rotate [VOL] to turn the power OFF , and remove the battery pack. (p. 3) w Remove the unit cover . NOTE: Use a flat head screw driver or a similar flat instru- ment, and insert into the hollow of the chassis, ...

  • Icom IC-F24/S - page 14

    21 5 BA TTERY CHARGING 5 20 5 BA TTER Y CHARGING ■ Battery charging Prior to using the transceiver for the fi rst time, the battery pack must be fully charged for optimum life and operation. CAUTION: T o avoid damage to the transceiver , turn it OFF while charging. • Recommended temperature range for charging: +10 ° C to +40 ° C (+50 ° F to ...

  • Icom IC-F24/S - page 15

    22 5 BA TTERY CHARGING 23 5 BA TTERY CHARGING 5 ■ Optional battery chargers D Rapid charging with the BC-160 The optional BC-160 provides rapid charging of optional Li-Ion bat - tery packs. • An AC adapter (may be supplied with BC-160 depending on ver- sion) or the DC power cable (OPC-515L/CP-17L) is additionally required. AC adapter (Not suppl ...

  • Icom IC-F24/S - page 16

    25 5 BA TTERY CHARGING 5 24 5 BA TTERY CHARGING D Rapid charging with the BC-1 19N+AD-106 The optional BC-1 19N provides rapid charging of optional Li-Ion battery packs. The following items are additionally required: • One AD-106 (purchase separately) . • An AC adapter (may be supplied with BC-1 19N depending on ver- sion) or the DC power cable ...

  • Icom IC-F24/S - page 17

    27 6 SWIVEL BEL T CLIP 6 26 6 SWIVEL BEL T CLIP ■ MB-93 contents Qty . q Belt clip …………………………………………………………… 1 w Base clip …………………………………………………………… 1 ■ T o attach q Release the battery pack if it is attached. (p. 3) w Slide the base clip in the direction of ...

  • Icom IC-F24/S - page 18

    29 6 SWIVEL BEL T CLIP 6 28 6 SWIVEL BEL T CLIP ■ T o detach q T urn the transceiver upside down in the direction of the arrow and pull out from the belt clip. w Release the battery pack if it is attached. (p. 3) e Pinch the clip ( q ), and slide the base clip in the direction of the arrow ( w ). CAUTION: HOLD THE TRANSCEIVER TIGHTL Y , WHEN HANG ...

  • Icom IC-F24/S - page 19

    31 7 OPTIONS 7 30 7 OPTIONS D BA TTER Y P ACK • BP-230 Li-Ion BA TTERY P ACK 7.4 V/800 mAh Li-Ion battery pack, allows approx. 5.5 hours* op- eration. • BP-231 Li-Ion BA TTERY P ACK 7.4 V/1 150 mAh Li-Ion battery pack, allows approx. 8 hours* op- eration. The same as supplied with the transceiver . • BP-232 Li-Ion BA TTERY P ACK 7.4 V/2000 mA ...

  • Icom IC-F24/S - page 20

    MEMO MEMO IC-F14_F24-2.qxd 04.7.22 0:57 PM Page 32 (1,1) ...

  • Icom IC-F24/S - page 21

    1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A-6369D-1EX- w Printed in Japan © 2004 Icom Inc. IC-F14_F24-2.qxd 04.7.22 0:57 PM Page 34 (1,1) ...

Manufacturer Icom Category Marine Radio

Documents that we receive from a manufacturer of a Icom IC-F24/S can be divided into several groups. They are, among others:
- Icom technical drawings
- IC-F24/S manuals
- Icom product data sheets
- information booklets
- or energy labels Icom IC-F24/S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Icom IC-F24/S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Icom IC-F24/S, service manual, brief instructions and user manuals Icom IC-F24/S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Icom IC-F24/S.

Similar manuals

A complete manual for the device Icom IC-F24/S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Icom IC-F24/S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Icom IC-F24/S.

A complete Icom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Icom IC-F24/S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Icom IC-F24/S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Icom IC-F24/S, that we can find in the current document
3. Tips how to use the basic functions of the device Icom IC-F24/S - which should help us in our first steps of using Icom IC-F24/S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Icom IC-F24/S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Icom IC-F24/S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Icom IC-F24/S?

Use the form below

If you did not solve your problem by using a manual Icom IC-F24/S, ask a question using the form below. If a user had a similar problem with Icom IC-F24/S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)