Manual Craftsman 315.27122

18 pages 0.78 mb
Download

Go to site of 18

Summary
  • Craftsman 315.27122 - page 1

    Owner's Manual iP R 0 F E S S I O N A L I 318 in. PROFESSIONAL CORDLESS DRILL-DRIVER Variable Speed / Reversible Model No. 315.271220 Save this manual for future reference CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., Hoffman Est ...

  • Craftsman 315.27122 - page 2

    TABLE OF CONTENTS • General Safety Rules ................................................................................................................................................. 2-3 • Specific Safety Rules/Symbols ........................................................................................................................... ...

  • Craftsman 315.27122 - page 3

    Tool Use and Care • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is d ...

  • Craftsman 315.27122 - page 4

    Important Safety Instructions For Charger • Save these instructions. This manual contains important safety and operating instructions for battery charger part number 9-11040. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • Before using battery charger, read all instructions and cautionary markings ...

  • Craftsman 315.27122 - page 5

    SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) rain Minutes Time "_ Alternating Current Type or a characteristic of current --= Direct Current Type or a characteristic of current no No Load Speed Rotational speed, at no load .../min Revolutions or Reciprocation Per Minute Re ...

  • Craftsman 315.27122 - page 6

    KNOW YOUR DRILL-DRIVER See Figure 1. Before attempting to use your drill-driver, familiarize yourself with all operating features and safety requirements. _i WARNING: Carefully read through this entire owner's manual before using your new drill-driver. Pay close attention to the Rules For Safe Operation, Warnings and Cautions. If you use your ...

  • Craftsman 315.27122 - page 7

    I.B/B. Brr SIOFIA6E Q'_RGE_ BA'FIB_ PACK GRBE_ UG-I]'"ON" INDCA'I_S FULLY _/_DSLOWQ-I/_NG TO f_t_Nr,_N I_._ PACK Fig. I CHARGER See Figure 2. Your charger has a "key hole" hanging feature for convenient, space saving storage. Screws should be installed so that center distances are 4-1/8 inches apart. 4-1/8 in ...

  • Craftsman 315.27122 - page 8

    INSTALLING BITS See Figure 3. • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 10. • Open or close chuck jaws to a point where the open- ing is slightly larger than the bit size you intend to use. Also, raise the front of your drill slightly to keep the bit from falling out of the chuck jaws ...

  • Craftsman 315.27122 - page 9

    TO ATTACH BATTERY PACK TO DRILL See Figure 5. Note: Battery pack is shipped in a low charge condition. Therefore, it must be charged prior to use. Refer to page 10, "CHARGING BATTERY PACK" for charging instructions. • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 10. • Align raise ...

  • Craftsman 315.27122 - page 10

    _1 WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. CHARGING BATTERY PACK The battery pack for this tool has been shipped in a low charge condition to prevent possible problems. Therefore, you shou ...

  • Craftsman 315.27122 - page 11

    SWITCH See Figure 8. To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. SB..BC_R c_ln_l:_6nlON (LOCI<) 9NITCH 1RGGi_ Fig. 8 VARIABLE SPEED This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger dep ...

  • Craftsman 315.27122 - page 12

    KEYLESS CHUCK See Figure 11. A keyless chuck has been provided with your drill to allow for easy installation and removal of bits. As the name implies, you can hand tighten or release drill bits in the chuck jaws. Arrows on the chuck indicate which direction to rotate the chuck sleeve in order to LOCK (tighten) or UNLOCK (release) the chuck jaws. L ...

  • Craftsman 315.27122 - page 13

    APPLICATIONS (Use drill-driver only for the purpose listed below) • Drilling in wood. • Drilling in ceramics, plastics, fiberglass, and lami- nates. • Drilling in both hard and soft metals. • Using driving accessories, such as driving screws with screwdriver bits. • Mixing paints. LEVEL DRILLING See Figure 14. A convenient feature provide ...

  • Craftsman 315.27122 - page 14

    CHUCK REMOVAL See Figures 16, 17, and 18. The chuck must be removed in order to use some accessories. To remove: • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 10. • Insert a 5/16 inch or larger allen wrench (hex key wrench) into the chuck of your drill and tighten the chuck jaws securely. ...

  • Craftsman 315.27122 - page 15

    WARNING: When servicing use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, ...

  • Craftsman 315.27122 - page 16

    The following recommended accessories are currently available at Sears Retail Stores. • 6-Pc. Extra Length Magnite Power Bit Set • 30-Pc. Power Screwdriver/Nutdriver Set and Case • 17-Pc. Power Screwdriver/Nutdriver Set and Case • High Speed Bits (For Wood or Metal)......3/4 in. Max. _i, WARNING: The use of attachments or accessories not li ...

  • Craftsman 315.27122 - page 17

    I CRAFTSMAN 318 in. PROFESSIONAL CORDLESS DRILL-DRIVER MODEL NO. 315.271220 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CRAFTSMAN 3/8 in. PROFESSIONAL CORDLESS DRILL-DRIVER or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS I ...

  • Craftsman 315.27122 - page 18

    In U.S.A. or Canada for in-home major brand repair service: Call 24 hours a day, 7 days a week 1-8004-MY-HOME sM (1-800-469-4663) Para pedir servicio de reparacibn a domicilio - 1-800-676-5811 Au Canada pour tout le service ou les pi_ces - 1-800-469 4663 For the repair or replacement parts you need: Call 6 a.m. - 11 p.m. CST, 7 days a week Parts Di ...

Manufacturer Craftsman Category Cordless Drill

Documents that we receive from a manufacturer of a Craftsman 315.27122 can be divided into several groups. They are, among others:
- Craftsman technical drawings
- 315.27122 manuals
- Craftsman product data sheets
- information booklets
- or energy labels Craftsman 315.27122
All of them are important, but the most important information from the point of view of use of the device are in the user manual Craftsman 315.27122.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Craftsman 315.27122, service manual, brief instructions and user manuals Craftsman 315.27122. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Craftsman 315.27122.

A complete manual for the device Craftsman 315.27122, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Craftsman 315.27122 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Craftsman 315.27122.

A complete Craftsman manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Craftsman 315.27122 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Craftsman 315.27122, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Craftsman 315.27122, that we can find in the current document
3. Tips how to use the basic functions of the device Craftsman 315.27122 - which should help us in our first steps of using Craftsman 315.27122
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Craftsman 315.27122
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Craftsman 315.27122 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Craftsman 315.27122?

Use the form below

If you did not solve your problem by using a manual Craftsman 315.27122, ask a question using the form below. If a user had a similar problem with Craftsman 315.27122 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)